IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Referring to platform_get_irq()'s definition, the return value has
already been checked, error message also been printed via
dev_err_probe() if ret < 0. Calling dev_err_probe() one more time
outside platform_get_irq() is obviously redundant.
Removing dev_err_probe() outside platform_get_irq() to clean up
above problem.
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20230727115551.2655840-1-chenjiahao16@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not used since commit 3a755cd8b7c6 ("bonding: add new option lacp_active")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230726143816.15280-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hayes Wang says:
====================
r8152: reduce control transfer
The two patches are used to reduce the number of control transfer when
access the registers in bulk.
====================
Link: https://lore.kernel.org/r/20230726030808.9093-417-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
could combine the control transfers into one control transfer.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce the control transfer if all bytes of first or the last DWORD are
written.
The original method is to split the control transfer into three parts
(the first DWORD, middle continuous data, and the last DWORD). However,
they could be combined if whole bytes of the first DWORD or last DWORD
are written. That is, the first DWORD or the last DWORD could be combined
with the middle continuous data, if the byte_en is 0xff.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-418-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pointer data is being incremented but this change to the pointer
is not used afterwards. The increment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20230726164522.369206-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever says:
====================
In-kernel support for the TLS Alert protocol
IMO the kernel doesn't need user space (ie, tlshd) to handle the TLS
Alert protocol. Instead, a set of small helper functions can be used
to handle sending and receiving TLS Alerts for in-kernel TLS
consumers.
====================
Merged on top of a tag in case it's needed in the NFS tree.
Link: https://lore.kernel.org/r/169047923706.5241.1181144206068116926.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm about to add support for kernel handshake API consumers to send
TLS Alerts, so introduce the needed protocol definitions in the new
header tls_prot.h.
This presages support for Closure alerts. Also, support for alerts
is a pre-requite for handling session re-keying, where one peer will
signal the need for a re-key by sending a TLS Alert.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047934064.5241.8377890858495063518.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel TLS consumers will need definitions of various parts of the
TLS protocol, but often do not need the function declarations and
other infrastructure provided in <net/tls.h>.
Break out existing standardized protocol elements into a separate
header, and make room for a few more elements in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/169047931374.5241.7713175865185969309.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix C=1 warning with sparse 0.6.4:
drivers/net/ethernet/broadcom/bnxt/bnxt.c: note: in included file:
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.h:30:1: warning: directive in macro's argument list
Don't put defines in a struct_group().
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230727190726.1859515-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a W=1 warning with gcc 13.1:
In function ‘fortify_memcpy_chk’,
inlined from ‘bnxt_hwrm_queue_cos2bw_cfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:133:3:
include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The field group is already defined and starts at queue_id:
struct bnxt_cos2bw_cfg {
u8 pad[3];
struct_group_attr(cfg, __packed,
u8 queue_id;
__le32 min_bw;
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230727190726.1859515-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Generalize devcom implementation to be independent of number of ports
or device's GUID.
2) Save memory on command interface statistics.
3) General code cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmTCuWsACgkQSD+KveBX
+j7u8Qf+Kqu8R8inJBKMDLlGBejdlA25HacsaRvYGvfPEhpmZMLdol/QsAdD0xZ7
p7NOy+2YUplVeobEEPH8aQnfocLu+VaO7p1vX0Em65u6GEE3TazggSn0CRgFIROn
trGM+Rg6Z9uv8LIFJjblpgAUIomuZ5xKjYAqxvK4YoWh6xt0gQwDa8nXBYT+7HA1
LXh1eGFO0JJuEhJ/xq4EK52P1LmErgEBX5MhbCRG30PENJMRuja15bMDJ1wwNFyS
wvYiNrVTemO5SP2ZBlkWizm8rMcL6NAGVAYlQLS3iR00C/1MPI8vFJlTRv+1LmM1
NkcKVpUcxAn6xsghrfxLLrK2r98zSQ==
=363t
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-07-24
1) Generalize devcom implementation to be independent of number of ports
or device's GUID.
2) Save memory on command interface statistics.
3) General code cleanups
* tag 'mlx5-updates-2023-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Give esw_offloads_load/unload_rep() "mlx5_" prefix
net/mlx5: Make mlx5_eswitch_load/unload_vport() static
net/mlx5: Make mlx5_esw_offloads_rep_load/unload() static
net/mlx5: Remove pointless devlink_rate checks
net/mlx5: Don't check vport->enabled in port ops
net/mlx5e: Make flow classification filters static
net/mlx5e: Remove duplicate code for user flow
net/mlx5: Allocate command stats with xarray
net/mlx5: split mlx5_cmd_init() to probe and reload routines
net/mlx5: Remove redundant cmdif revision check
net/mlx5: Re-organize mlx5_cmd struct
net/mlx5e: E-Switch, Allow devcom initialization on more vports
net/mlx5e: E-Switch, Register devcom device with switch id key
net/mlx5: Devcom, Infrastructure changes
net/mlx5: Use shared code for checking lag is supported
====================
Link: https://lore.kernel.org/r/20230727183914.69229-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Avoid non-tracker helpers when holding and putting netdevices
Using the tracking helpers, netdev_hold() and netdev_put(), makes it easier
to debug netdevice refcount imbalances when CONFIG_NET_DEV_REFCNT_TRACKER
is enabled. For example, the following traceback shows the callpath to the
point of an outstanding hold that was never put:
unregister_netdevice: waiting for swp3 to become free. Usage count = 6
ref_tracker: eth%d@ffff888123c9a580 has 1/5 users at
mlxsw_sp_switchdev_event+0x6bd/0xcc0 [mlxsw_spectrum]
notifier_call_chain+0xbf/0x3b0
atomic_notifier_call_chain+0x78/0x200
br_switchdev_fdb_notify+0x25f/0x2c0 [bridge]
fdb_notify+0x16a/0x1a0 [bridge]
[...]
In this patchset, get rid of all non-ref-tracking helpers in mlxsw.
- Patch #1 drops two functions that are not used anymore, but contain
dev_hold() / dev_put() calls.
- Patch #2 avoids taking a reference in one function which is called
under RTNL.
- The remaining patches convert individual hold/put sites one by one
from trackerless to tracker-enabled.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/netdev/4c056da27c19d95ffeaba5acf1427ecadfc3f94c.camel@redhat.com/
====================
Link: https://lore.kernel.org/r/cover.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the tracking helpers makes it easier to debug netdevice refcount
imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled.
Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the
router code that deals with IPv6 address events.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f0af6ad4722b4ca6e598fd4fda8311a3041651ec.1690471775.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the tracking helpers makes it easier to debug netdevice refcount
imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled.
Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the
router code that deals with RIF allocation.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/8b7701a7b439ac268e4be4040eff99d01e27ae47.1690471775.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the tracking helpers makes it easier to debug netdevice refcount
imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled.
Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the
router code that deals with hw_stats events.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/b972314cfef4f4c24e66e60d13cffa5d606d1bf3.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the tracking helpers makes it easier to debug netdevice refcount
imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled.
Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the
router code that deals with FIB events.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/5221a92e751c40447c55959f622267ccc999ed04.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the tracking helpers makes it easier to debug netdevice refcount
imbalances when CONFIG_NET_DEV_REFCNT_TRACKER is enabled.
Convert dev_hold() / dev_put() to netdev_hold() / netdev_put() in the
switchdev module.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/774c3d7b5b0231f1435df2ec9dd660192e382756.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_sp_nve_fid_disable() is always called under RTNL. It is therefore
safe to call __dev_get_by_index() to get the netdevice pointer without
bumping the reference count, because we can be sure the netdevice is not
going away. That then obviates the need to put the netdevice later in the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/341d1046f89d8d839d9d00e4a3d58cdc351e9397.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of commit 151b89f6025a ("mlxsw: spectrum_router: Reuse work neighbor
initialization in work scheduler"), the functions
mlxsw_sp_port_lower_dev_hold() and mlxsw_sp_port_dev_put() have no users.
Drop them.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d0adcd7cb4ea19416294a0f861100edba84c9f36.1690471774.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reap the benefits of easier iteration thanks to the xarray.
Convert just the genetlink ones, those are easier to test.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230726185530.2247698-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Iterating over the netdev hash table for netlink dumps is hard.
Dumps are done in "chunks" so we need to save the position
after each chunk, so we know where to restart from. Because
netdevs are stored in a hash table we remember which bucket
we were in and how many devices we dumped.
Since we don't hold any locks across the "chunks" - devices may
come and go while we're dumping. If that happens we may miss
a device (if device is deleted from the bucket we were in).
We indicate to user space that this may have happened by setting
NLM_F_DUMP_INTR. User space is supposed to dump again (I think)
if it sees that. Somehow I doubt most user space gets this right..
To illustrate let's look at an example:
System state:
start: # [A, B, C]
del: B # [A, C]
with the hash table we may dump [A, B], missing C completely even
tho it existed both before and after the "del B".
Add an xarray and use it to allocate ifindexes. This way we
can iterate ifindexes in order, without the worry that we'll
skip one. We may still generate a dump of a state which "never
existed", for example for a set of values and sequence of ops:
System state:
start: # [A, B]
add: C # [A, C, B]
del: B # [A, C]
we may generate a dump of [A], if C got an index between A and B.
System has never been in such state. But I'm 90% sure that's perfectly
fine, important part is that we can't _miss_ devices which exist before
and after. User space which wants to mirror kernel's state subscribes
to notifications and does periodic dumps so it will know that C exists
from the notification about its creation or from the next dump
(next dump is _guaranteed_ to include C, if it doesn't get removed).
To avoid any perf regressions keep the hash table for now. Most
net namespaces have very few devices and microbenchmarking 1M lookups
on Skylake I get the following results (not counting loopback
to number of devs):
#devs | hash | xa | delta
2 | 18.3 | 20.1 | + 9.8%
16 | 18.3 | 20.1 | + 9.5%
64 | 18.3 | 26.3 | +43.8%
128 | 20.4 | 26.3 | +28.6%
256 | 20.0 | 26.4 | +32.1%
1024 | 26.6 | 26.7 | + 0.2%
8192 |541.3 | 33.5 | -93.8%
No surprises since the hash table has 256 entries.
The microbenchmark scans indexes in order, if the pattern is more
random xa starts to win at 512 devices already. But that's a lot
of devices, in practice.
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230726185530.2247698-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Technically we don't have to keep extending the sample, but it
feels useful to run these tools locally to confirm everything
is working.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230727163001.3952878-5-sdf@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also add support to pass topdir to ynl-regen.sh (Jakub) and call
it from the makefile to update the UAPI headers.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230727163001.3952878-4-sdf@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon mentioned in another thread that it makes kdoc happy
and Jakub confirms that commit e27cb89a22ad ("scripts: kernel-doc: support
private / public marking for enums") actually added the needed
support.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230727163001.3952878-3-sdf@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also rename it to dashes, to match the rest. And fix unrelated
spelling error while we're at it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230727163001.3952878-2-sdf@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
t-queue
Tony Nguyen says:
====================
ice: Implement support for SRIOV + LAG
Dave Ertman says:
Implement support for SRIOV VF's on interfaces that are in an
aggregate interface.
The first interface added into the aggregate will be flagged as
the primary interface, and this primary interface will be
responsible for managing the VF's resources. VF's created on the
primary are the only VFs that will be supported on the aggregate.
Only Active-Backup mode will be supported and only aggregates whose
primary interface is in switchdev mode will be supported.
The ice-lag DDP must be loaded to support this feature.
Additional restrictions on what interfaces can be added to the aggregate
and still support SRIOV VFs are:
- interfaces have to all be on the same physical NIC
- all interfaces have to have the same QoS settings
- interfaces have to have the FW LLDP agent disabled
- only the primary interface is to be put into switchdev mode
- no more than two interfaces in the aggregate
---
v2:
- Move NULL check for q_ctx in ice_lag_qbuf_recfg() earlier (patch 6)
v1: https://lore.kernel.org/netdev/20230726182141.3797928-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack info for IPv6 address add/delete, which would be useful for
users to understand the problem without having to read kernel code.
Suggested-by: Beniamino Galvani <bgalvani@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Maftei says:
====================
selftests/ptp: Add support for new timestamp IOCTLs
PTP_SYS_OFFSET_EXTENDED was added in November 2018 in
361800876f80 (" ptp: add PTP_SYS_OFFSET_EXTENDED ioctl")
and PTP_SYS_OFFSET_PRECISE was added in February 2016 in
719f1aa4a671 ("ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping")
The PTP selftest code is lacking support for these two IOCTLS.
This short series of patches adds support for them.
Changes in v2:
- Fixed rebase issues (v1 somehow ended up with patch 1 being from the
first manual split of my changes and patch 2 being from rebase 2 out
of 3)
- Rebased on top of net-next
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The -X option was chosen because X looks like a cross, and the underlying
callback is 'get cross timestamp'.
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The -x option (where 'x' stands for eXtended) takes an argument which
represents the number of samples to request from the PTP device.
The help message will display the maximum number of samples allowed.
Providing an invalid argument will also display the maximum number of
samples allowed.
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmTDclgTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6C9xB/40NJBrFJknDzF9hVHL7aynsJAi3qJ1
T5U061NIVWSjPKOcIbKHX9I7c9KBh+jv+GhxLSlpDq0f+6JYNlNXykowVIaq76Kk
gVYXxBu1MXJqkxKH9qy4WxpNZVa7XjXOzRm/wEg34cMsN9S5EX9BNsJgvHH+/6OH
S9UUpbr0AfngsYxPGMcoXUMDBD0o2Cf5orp+Ml9o9IdwbgGlojgRtMYK6G/BL+TF
vZCS6jb6bBe5VSnoD5qDMRExtgIyCvXHG2s8BYk/4XkKfMBKKJoFFMZD+2z3HAk8
02de5h/eqMbta03w/+4DaQklb2Gvk8wkT3w1Nn67+lEutC/xyMiNL89D
=lD7D
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230728' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
linux-can-next-for-6.6-20230728
Marc Kleine-Budde says:
====================
Hello netdev-team,
this is a pull request of 21 patches for net-next/master.
The 1st patch is by Gerhard Uttenthaler, which adds Gerhard as the
maintainer ems_pci driver.
Peter Seiderer's patch removes a unused function from the peak_usb
driver.
The next 4 patches are by John Watts and add support for the sun4i_can
driver on the Allwinner D1.
Rob Herring's patch corrects the DT includes in various CAN drivers.
Followed by 14 patches from me concerning the gs_usb driver. The first
11 are various cleanups consisting of coding style improvements, error
path printout cleanups, and removal of unneeded
usb_kill_anchored_urbs(). The last 3 convert the driver to use NAPI to
avoid out-of-order reception of CAN frames.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets says:
====================
sfc: Remove Siena bits from sfc.ko
Last year we split off Siena into it's own driver under directory siena.
This patch series removes the now unused Falcon and Siena code from sfc.ko.
No functional changes are intended.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It was only used for Siena SRIOV, so nothing includes it any more
in this directory.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the Falcon locking description does not apply to EF10.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove comments that only apply to Falcon and Siena.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The attributes index and entries are no longer needed, so use
struct efx_buffer instead.
next_buffer_table was also Siena specific.
Removed some checkpatch warnings.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
unicast_filter and multicast_hash are no longer needed.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The special handling for SRIOV reset and FLR is not needed on EF10.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
