IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Refactor the ice driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
@get@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the iavf driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the i40e driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
While making one of the conversions, an if() check was inverted to
return early and avoid un-necessary indentation of the remainder of the
function. In some other cases a stack variable was moved inside the
block where it was used while doing cleanups/review.
A couple places were changed to use le16_get_bits() instead of FIELD_GET
with a le16_to_cpu combination.
@get@
constant shift,mask;
metavariable type T;
expression a;
@@
-(((T)(a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor the igc driver to use FIELD_GET() for mask and shift reads,
which reduces lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@get@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor several older Intel drivers to use FIELD_GET(), which reduces
lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
@get@
constant shift,mask;
type T;
expression a;
@@
(
-((T)((a) & mask) >> shift)
+FIELD_GET(mask, a)
and applied via:
spatch --sp-file field_prep.cocci --in-place --dir \
drivers/net/ethernet/intel/
Cc: Julia Lawall <Julia.Lawall@inria.fr>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor igc driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired in a later patch.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
While converting to FIELD_PREP() and FIELD_GET(), it was noticed that
some of the RSS defines had *included* the shift in their definitions.
This is completely outside of normal, such that a developer could easily
make a mistake and shift at the usage site (like when using
FIELD_PREP()).
Rename the defines and set them to the "pre-shifted values" so they
match the template the driver normally uses for masks and the member
bits of the mask, which also allows the driver to use FIELD_PREP
correctly with these values. Use GENMASK() for this changed MASK value.
Do the same for the VLAN EMODE defines as well.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor ice driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
Several places I changed to OR into a single variable with |= instead of
using a multi-line statement with trailing OR operators, as it
(subjectively) makes the code clearer.
A local variable vmvf_and_timeout was created and used to avoid multiple
logical ORs being __le16 converted, which shortened some lines and makes
the code cleaner.
Also clean up a couple of places where conversions were made to have the
code read more clearly/consistently.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
CC: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor iavf driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
Clean up a couple spots in the code that had repetitive
y = cpu_to_*((blah << blah_blah) & blat)
y |= cpu_to_*((blahs << blahs_blahs) & blats)
to
x = FIELD_PREP(blat blah)
x |= FIELD_PREP(blats, blahs)
y = cpu_to_*(x);
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor i40e driver to use FIELD_PREP(), which reduces lines of code
and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
Refactor one function with multiple if's to return quickly to make lines
fit in 80 columns.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor several older Intel drivers to use FIELD_PREP(), which reduces
lines of code and adds clarity of intent.
This code was generated by the following coccinelle/spatch script and
then manually repaired.
@prep2@
constant shift,mask;
type T;
expression a;
@@
-(((T)(a) << shift) & mask)
+FIELD_PREP(mask, a)
@prep@
constant shift,mask;
type T;
expression a;
@@
-((T)((a) << shift) & mask)
+FIELD_PREP(mask, a)
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This series is introducing the use of FIELD_GET and FIELD_PREP which
requires bitfield.h to be included. Fix all the includes in this one
change, and rearrange includes into alphabetical order to ease
readability and future maintenance.
virtchnl.h and it's usage was modified to have it's own includes as it
should. This required including bits.h for virtchnl.h.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For more than 15 years this code has passed in a request for a page and
masked off that page when read/writing. This code has been here forever,
but FIELD_PREP finds the bug when converted to use it. Change the code
to do exactly the same thing but allow the conversion to FIELD_PREP in a
later patch. To make it clear what we lost when making this change I
left a comment, but there is no point to change the code to generate a
correct sequence at this point.
This is not a Fixes tagged patch on purpose because it doesn't change
the binary output.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pedro Tammela says:
====================
net: rtnl: introduce rcu_replace_pointer_rtnl
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock
rcu replacements, alongside the already existing helpers.
Patch 2 uses the new helper in the rtnl_unregister_* functions.
Originally this change was part of the P4TC series, as it's a recurrent
pattern there, but since it has a use case in mainline we are pushing it
separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of the rcu_replace_pointer_rtnl helper,
cleanup the rtnl_unregister_* functions to use the helper instead
of open coding it.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce the rcu_replace_pointer_rtnl helper to lockdep check rtnl lock
rcu replacements, alongside the already existing helpers.
This is a quality of life helper so instead of using:
rcu_replace_pointer(rp, p, lockdep_rtnl_is_held())
.. or the open coded..
rtnl_dereference() / rcu_assign_pointer()
.. or the lazy check version ..
rcu_replace_pointer(rp, p, 1)
Use:
rcu_replace_pointer_rtnl(rp, p)
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: phy: add PHY package base addr + mmd APIs
This small series is required for the upcoming qca807x PHY that
will make use of PHY package mmd API and the new implementation
with read/write based on base addr.
The MMD PHY package patch currently has no use but it will be
used in the upcoming patch and it does complete what a PHY package
may require in addition to basic read/write to setup global PHY address.
(Changelog for all the revision is present in the single patch)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some PHY in PHY package may require to read/write MMD regs to correctly
configure the PHY package.
Add support for these additional required function in both lock and no
lock variant.
It's assumed that the entire PHY package is either C22 or C45. We use
C22 or C45 way of writing/reading to mmd regs based on the passed phydev
whether it's C22 or C45.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restructure phy_write_mmd and phy_read_mmd to implement generic helper
for direct mdiobus access for mmd and use these helper for phydev user.
This is needed in preparation of PHY package API that requires generic
access to the mdiobus and are deatched from phydev struct but instead
access them based on PHY package base_addr and offsets.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current API for PHY package are limited to single address to configure
global settings for the PHY package.
It was found that some PHY package (for example the qca807x, a PHY
package that is shipped with a bundle of 5 PHY) requires multiple PHY
address to configure global settings. An example scenario is a PHY that
have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
PHY in the package where the global PHY mode is set and affects every
other PHY in the package.
Change the API in the following way:
- Change phy_package_join() to take the base addr of the PHY package
instead of the global PHY addr.
- Make __/phy_package_write/read() require an additional arg that
select what global PHY address to use by passing the offset from the
base addr passed on phy_package_join().
Each user of this API is updated to follow this new implementation
following a pattern where an enum is defined to declare the offset of the
addr.
We also drop the check if shared is defined as any user of the
phy_package_read/write is expected to use phy_package_join first. Misuse
of this will correctly trigger a kernel panic for NULL pointer
exception.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch addr type in phy_package_shared struct to u8.
The value is already checked to be non negative and to be less than
PHY_MAX_ADDR, hence u8 is better suited than using int.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some silicon variants the number of available CAM entries are
less. Reserving one entry for each NIX-LF for default DMAC based pkt
forwarding rules will reduce the number of available CAM entries
further. Hence add configurability via devlink to set maximum number of
NIX-LFs needed which inturn frees up some CAM entries.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Liang Chen says:
====================
skbuff: Optimize SKB coalescing for page pool
The combination of the following condition was excluded from skb coalescing:
from->pp_recycle = 1
from->cloned = 1
to->pp_recycle = 1
With page pool in use, this combination can be quite common(ex.
NetworkMananger may lead to the additional packet_type being registered,
thus the cloning). In scenarios with a higher number of small packets, it
can significantly affect the success rate of coalescing.
This patchset aims to optimize this scenario and enable coalescing of this
particular combination. That also involves supporting multiple users
referencing the same fragment of a pp page to accomondate the need to
increment the "from" SKB page's pp page reference count.
Changes from v10:
- re-number patches to 1/3, 2/3, 3/3
Changes from v9:
- patch 1 was already applied
- imporve description for patch 2
- make sure skb_pp_frag_ref only work for pp aware skbs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to address the issues encountered with commit 1effe8ca4e34
("skbuff: fix coalescing for page_pool fragment recycling"), the
combination of the following condition was excluded from skb coalescing:
from->pp_recycle = 1
from->cloned = 1
to->pp_recycle = 1
However, with page pool environments, the aforementioned combination can
be quite common(ex. NetworkMananger may lead to the additional
packet_type being registered, thus the cloning). In scenarios with a
higher number of small packets, it can significantly affect the success
rate of coalescing. For example, considering packets of 256 bytes size,
our comparison of coalescing success rate is as follows:
Without page pool: 70%
With page pool: 13%
Consequently, this has an impact on performance:
Without page pool: 2.57 Gbits/sec
With page pool: 2.26 Gbits/sec
Therefore, it seems worthwhile to optimize this scenario and enable
coalescing of this particular combination. To achieve this, we need to
ensure the correct increment of the "from" SKB page's page pool
reference count (pp_ref_count).
Following this optimization, the success rate of coalescing measured in
our environment has improved as follows:
With page pool: 60%
This success rate is approaching the rate achieved without using page
pool, and the performance has also been improved:
With page pool: 2.52 Gbits/sec
Below is the performance comparison for small packets before and after
this optimization. We observe no impact to packets larger than 4K.
packet size before after improved
(bytes) (Gbits/sec) (Gbits/sec)
128 1.19 1.27 7.13%
256 2.26 2.52 11.75%
512 4.13 4.81 16.50%
1024 6.17 6.73 9.05%
2048 14.54 15.47 6.45%
4096 25.44 27.87 9.52%
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wrap code for checking if a page is a page_pool page into a
function for better readability and ease of reuse.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up to now, we were only subtracting from the number of used page fragments
to figure out when a page could be freed or recycled. A following patch
introduces support for multiple users referencing the same fragment. So
reduce the initial page fragments value to half to avoid overflowing.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Mina Almasry <almarsymina@google.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Safonov says:
====================
selftests/net: Add TCP-AO tests
An essential part of any big kernel submissions is selftests.
At the beginning of TCP-AO project, I made patches to fcnal-test.sh
and nettest.c to have the benefits of easy refactoring, early noticing
breakages, putting a moat around the code, documenting
and designing uAPI.
While tests based on fcnal-test.sh/nettest.c provided initial testing*
and were very easy to add, the pile of TCP-AO quickly grew out of
one-binary + shell-script testing.
The design of the TCP-AO testing is a bit different than one-big
selftest binary as I did previously in net/ipsec.c. I found it
beneficial to avoid implementing a tests runner/scheduler and delegate
it to the user or Makefile. The approach is very influenced
by CRIU/ZDTM testing[1]: it provides a static library with helper
functions and selftest binaries that create specific scenarios.
I also tried to utilize kselftest.h.
test_init() function does all needed preparations. To not leave
any traces after a selftest exists, it creates a network namespace
and if the test wants to establish a TCP connection, a child netns.
The parent and child netns have veth pair with proper ip addresses
and routes set up. Both peers, the client and server are different
pthreads. The treading model was chosen over forking mostly by easiness
of cleanup on a failure: no need to search for children, handle SIGCHLD,
make sure not to wait for a dead peer to perform anything, etc.
Any thread that does exit() naturally kills the tests, sweet!
The selftests are compiled currently in two variants: ipv4 and ipv6.
Ipv4-mapped-ipv6 addresses might be a third variant to add, but it's not
there in this version. As pretty much all tests are shared between two
address families, most of the code can be shared, too. To differ in code
what kind of test is running, Makefile supplies -DIPV6_TEST to compiler
and ifdeffery in tests can do things that have to be different between
address families. This is similar to TARGETS_C_BOTHBITS in x86 selftests
and also to tests code sharing in CRIU/ZDTM.
The total number of tests is 832.
From them rst_ipv{4,6} has currently one flaky subtest, that may fail:
> not ok 9 client connection was not reset: 0
I'll investigate what happens there. Also, unsigned-md5_ipv{4,6}
are flaky because of netns counter checks: it doesn't expect that
there may be retransmitted TCP segments from a previous sub-selftest.
That will be fixed. Besides, key-management_ipv{4,6} has 3 sub-tests
passing with XFAIL:
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
...
> # Totals: pass:117 fail:0 xfail:3 xpass:0 skip:0 error:0
Those need some more kernel work to pass instead of xfail.
The overview of selftests (see the diffstat at the bottom):
├── lib
│ ├── aolib.h
│ │ The header for all selftests to include.
│ ├── kconfig.c
│ │ Kernel kconfig detector to SKIP tests that depend on something.
│ ├── netlink.c
│ │ Netlink helper to add/modify/delete VETH/IPs/routes/VRFs
│ │ I considered just using libmnl, but this is around 400 lines
│ │ and avoids selftests dependency on out-of-tree sources/packets.
│ ├── proc.c
│ │ SNMP/netstat procfs parser and the counters comparator.
│ ├── repair.c
│ │ Heavily influenced by libsoccr and reduced to minimum TCP
│ │ socket checkpoint/repair. Shouldn't be used out of selftests,
│ │ though.
│ ├── setup.c
│ │ All the needed netns/veth/ips/etc preparations for test init.
│ ├── sock.c
│ │ Socket helpers: {s,g}etsockopt()s/connect()/listen()/etc.
│ └── utils.c
│ Random stuff (a pun intended).
├── bench-lookups.c
│ The only benchmark in selftests currently: checks how well TCP-AO
│ setsockopt()s perform, depending on the amount of keys on a socket.
├── connect.c
│ Trivial sample, can be used as a boilerplate to write a new test.
├── connect-deny.c
│ More-or-less what could be expected for TCP-AO in fcnal-test.sh
├── icmps-accept.c -> icmps-discard.c
├── icmps-discard.c
│ Verifies RFC5925 (7.8) by checking that TCP-AO connection can be
│ broken if ICMPs are accepted and survives when ::accept_icmps = 0
├── key-management.c
│ Key manipulations, rotations between randomized hashing algorithms
│ and counter checks for those scenarios.
├── restore.c
│ TCP_AO_REPAIR: verifies that a socket can be re-created without
│ TCP-AO connection being interrupted.
├── rst.c
│ As RST segments are signed on a separate code-path in kernel,
│ verifies passive/active TCP send_reset().
├── self-connect.c
│ Verifies that TCP self-connect and also simultaneous open work.
├── seq-ext.c
│ Utilizes TCP_AO_REPAIR to check that on SEQ roll-over SNE
│ increment is performed and segments with different SNEs fail to
│ pass verification.
├── setsockopt-closed.c
│ Checks that {s,g}etsockopt()s are extendable syscalls and common
│ error-paths for them.
└── unsigned-md5.c
Checks listen() socket for (non-)matching peers with: AO/MD5/none
keys. As well as their interaction with VRFs and AO_REQUIRED flag.
There are certainly more test scenarios that can be added, but even so,
I'm pretty happy that this much of TCP-AO functionality and uAPIs got
covered. These selftests were iteratively developed by me during TCP-AO
kernel upstreaming and the resulting kernel patches would have been
worse without having these tests. They provided the user-side
perspective but also allowed safer refactoring with less possibility
of introducing a regression. Now it's time to use them to dig
a moat around the TCP-AO code!
There are also people from other network companies that work on TCP-AO
(+testing), so sharing these selftests will allow them to contribute
and may benefit from their efforts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Check multiple keys on a socket:
- rotation on closed socket
- current/rnext operations shouldn't be possible on listen sockets
- current/rnext key set should be the one, that's used on connect()
- key rotations with pseudo-random generated keys
- copying matching keys on connect() and on accept()
At this moment there are 3 tests that are "expected" to fail: a kernel
fix is needed to improve the situation, they are marked XFAIL.
Sample output:
> # ./key-management_ipv4
> 1..120
> # 1601[lib/setup.c:239] rand seed 1700526653
> TAP version 13
> ok 1 closed socket, delete a key: the key was deleted
> ok 2 closed socket, delete all keys: the key was deleted
> ok 3 closed socket, delete current key: key deletion was prevented
> ok 4 closed socket, delete rnext key: key deletion was prevented
> ok 5 closed socket, delete a key + set current/rnext: the key was deleted
> ok 6 closed socket, force-delete current key: the key was deleted
> ok 7 closed socket, force-delete rnext key: the key was deleted
> ok 8 closed socket, delete current+rnext key: key deletion was prevented
> ok 9 closed socket, add + change current key
> ok 10 closed socket, add + change rnext key
> ok 11 listen socket, delete a key: the key was deleted
> ok 12 listen socket, delete all keys: the key was deleted
> ok 13 listen socket, setting current key not allowed
> ok 14 listen socket, setting rnext key not allowed
> ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200
> ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16
> ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16
> ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted
> ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted
> ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented
> ok 21 listen socket, force-delete current key: key deletion was prevented
> ok 22 listen socket, force-delete rnext key: key deletion was prevented
> ok 23 listen socket, delete a key: the key was deleted
> ok 24 listen socket, add + change current key
> ok 25 listen socket, add + change rnext key
> ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected
> ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected
> ok 29 server: Check current/rnext keys unset before connect(): server alive
> ok 30 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations
> ok 33 server: Check current/rnext keys unset before connect(): passed counters checks
> ok 34 client: Check current/rnext keys unset before connect(): passed counters checks
> ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 36 server: Check current/rnext keys set before connect(): server alive
> ok 37 server: Check current/rnext keys set before connect(): passed counters checks
> ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected
> ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected
> ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 42 client: Check current/rnext keys set before connect(): passed counters checks
> ok 43 server: Check current/rnext keys set before connect(): passed counters checks
> ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 45 server: Check current != rnext keys set before connect(): server alive
> ok 46 server: Check current != rnext keys set before connect(): passed counters checks
> ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected
> ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected
> ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations
> ok 51 client: Check current != rnext keys set before connect(): passed counters checks
> ok 52 server: Check current != rnext keys set before connect(): passed counters checks
> ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 54 server: Check current flapping back on peer's RnextKey request: server alive
> ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected
> ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected
> ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations
> ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks
> ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 63 server: Rotate over all different keys: server alive
> ok 64 server: Rotate over all different keys: passed counters checks
> ok 65 server: Rotate over all different keys: current key 128 as expected
> ok 66 client: Rotate over all different keys: rnext key 128 as expected
> ok 67 server: Rotate over all different keys: current key 129 as expected
> ok 68 client: Rotate over all different keys: rnext key 129 as expected
> ok 69 server: Rotate over all different keys: current key 130 as expected
> ok 70 client: Rotate over all different keys: rnext key 130 as expected
> ok 71 server: Rotate over all different keys: current key 131 as expected
> ok 72 client: Rotate over all different keys: rnext key 131 as expected
> ok 73 server: Rotate over all different keys: current key 132 as expected
> ok 74 client: Rotate over all different keys: rnext key 132 as expected
> ok 75 server: Rotate over all different keys: current key 133 as expected
> ok 76 client: Rotate over all different keys: rnext key 133 as expected
> ok 77 server: Rotate over all different keys: current key 134 as expected
> ok 78 client: Rotate over all different keys: rnext key 134 as expected
> ok 79 server: Rotate over all different keys: current key 135 as expected
> ok 80 client: Rotate over all different keys: rnext key 135 as expected
> ok 81 server: Rotate over all different keys: current key 136 as expected
> ok 82 client: Rotate over all different keys: rnext key 136 as expected
> ok 83 server: Rotate over all different keys: current key 137 as expected
> ok 84 client: Rotate over all different keys: rnext key 137 as expected
> ok 85 server: Rotate over all different keys: current key 138 as expected
> ok 86 client: Rotate over all different keys: rnext key 138 as expected
> ok 87 server: Rotate over all different keys: current key 139 as expected
> ok 88 client: Rotate over all different keys: rnext key 139 as expected
> ok 89 server: Rotate over all different keys: current key 140 as expected
> ok 90 client: Rotate over all different keys: rnext key 140 as expected
> ok 91 server: Rotate over all different keys: current key 141 as expected
> ok 92 client: Rotate over all different keys: rnext key 141 as expected
> ok 93 server: Rotate over all different keys: current key 142 as expected
> ok 94 client: Rotate over all different keys: rnext key 142 as expected
> ok 95 server: Rotate over all different keys: current key 143 as expected
> ok 96 client: Rotate over all different keys: rnext key 143 as expected
> ok 97 server: Rotate over all different keys: current key 144 as expected
> ok 98 client: Rotate over all different keys: rnext key 144 as expected
> ok 99 server: Rotate over all different keys: current key 145 as expected
> ok 100 client: Rotate over all different keys: rnext key 145 as expected
> ok 101 server: Rotate over all different keys: current key 146 as expected
> ok 102 client: Rotate over all different keys: rnext key 146 as expected
> ok 103 server: Rotate over all different keys: current key 127 as expected
> ok 104 client: Rotate over all different keys: rnext key 127 as expected
> ok 105 client: Rotate over all different keys: current key 0 as expected
> ok 106 client: Rotate over all different keys: rnext key 127 as expected
> ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations
> ok 109 client: Rotate over all different keys: passed counters checks
> ok 110 server: Rotate over all different keys: passed counters checks
> ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 112 Can't add a key with non-matching ip-address for established sk
> ok 113 Can't add a key with non-matching VRF for established sk
> ok 114 server: Check accept() => established key matching: server alive
> ok 115 server: Check accept() => established key matching: passed counters checks
> ok 116 client: Check connect() => established key matching: current key 0 as expected
> ok 117 client: Check connect() => established key matching: rnext key 128 as expected
> ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations
> ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations
> ok 120 server: Check accept() => established key matching: passed counters checks
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that a rare functionality of TCP named self-connect works with
TCP-AO. This "under the cover" also checks TCP simultaneous connect
(TCP_SYN_RECV socket state), which would be harder to check other ways.
In order to verify that it's indeed TCP simultaneous connect, check
the counters TCPChallengeACK and TCPSYNChallenge.
Sample of the output:
> # ./self-connect_ipv6
> 1..4
> # 1738[lib/setup.c:254] rand seed 1696451931
> TAP version 13
> ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24
> ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50
> ok 3 self-connect(restore): connect TCPAOGood 52 => 97
> ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144
> # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that both active and passive reset works and correctly sign
segments with TCP-AO or don't send RSTs if not possible to sign.
A listening socket with backlog = 0 gets one connection in accept
queue, another in syn queue. Once the server/listener socket is
forcibly closed, client sockets aren't connected to anything.
In regular situation they would receive RST on any segment, but
with TCP-AO as there's no listener, no AO-key and unknown ISNs,
no RST should be sent.
And "passive" reset, where RST is sent on reply for some segment
(tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers,
which later results in TCP-AO signed RST, which will be verified and
client socket will get EPIPE.
No TCPAORequired/TCPAOBad segments are expected during these tests.
Sample of the output:
> # ./rst_ipv4
> 1..15
> # 1462[lib/setup.c:254] rand seed 1686611171
> TAP version 13
> ok 1 servered 1000 bytes
> ok 2 Verified established tcp connection
> ok 3 sk[0] = 7, connection was reset
> ok 4 sk[1] = 8, connection was reset
> ok 5 sk[2] = 9
> ok 6 MKT counters are good on server
> ok 7 Verified established tcp connection
> ok 8 client connection broken post-seq-adjust
> ok 9 client connection was reset
> ok 10 No segments without AO sign (server)
> ok 11 Signed AO segments (server): 0 => 30
> ok 12 No segments with bad AO sign (server)
> ok 13 No segments without AO sign (client)
> ok 14 Signed AO segments (client): 0 => 30
> ok 15 No segments with bad AO sign (client)
> # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check that on SEQ number wraparound there is no disruption or TCPAOBad
segments produced.
Sample of expected output:
> # ./seq-ext_ipv4
> 1..7
> # 1436[lib/setup.c:254] rand seed 1686611079
> TAP version 13
> ok 1 server alive
> ok 2 post-migrate connection alive
> ok 3 TCPAOGood counter increased 1002 => 3002
> ok 4 TCPAOGood counter increased 1003 => 3003
> ok 5 TCPAOBad counter didn't increase
> ok 6 TCPAOBad counter didn't increase
> ok 7 SEQ extension incremented: 1/1999, 1/998999
> # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan is:
1. check that TCP-AO connection may be restored on another socket
2. check restore with wrong send/recv ISN (checking that they are
part of MAC generation)
3. check restore with wrong SEQ number extension (checking that
high bytes of it taken into MAC generation)
Sample output expected:
> # ./restore_ipv4
> 1..20
> # 1412[lib/setup.c:254] rand seed 1686610825
> TAP version 13
> ok 1 TCP-AO migrate to another socket: server alive
> ok 2 TCP-AO migrate to another socket: post-migrate connection is alive
> ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44
> ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42
> ok 5 TCP-AO with wrong send ISN: server couldn't serve
> ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken
> ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4
> ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3
> ok 9 TCP-AO with wrong receive ISN: server couldn't serve
> ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken
> ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8
> ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10
> ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve
> ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken
> ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10
> ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19
> ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken
> ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve
> ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18
> ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23
> # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test plan was (most of tests have all 3 client types):
1. TCP-AO listen (INADDR_ANY)
2. TCP-MD5 listen (INADDR_ANY)
3. non-signed listen (INADDR_ANY)
4. TCP-AO + TCP-MD5 listen (prefix)
5. TCP-AO subprefix add failure [checked in setsockopt-closed.c]
6. TCP-AO out of prefix connect [checked in connect-deny.c]
7. TCP-AO + TCP-MD5 on connect()
8. TCP-AO intersect with TCP-MD5 failure
9. Established TCP-AO: add TCP-MD5 key
10. Established TCP-MD5: add TCP-AO key
11. Established non-signed: add TCP-AO key
Output produced:
> # ./unsigned-md5_ipv6
> 1..72
> # 1592[lib/setup.c:239] rand seed 1697567046
> TAP version 13
> ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2
> ok 2 AO server (INADDR_ANY): AO client: connected
> ok 3 AO server (INADDR_ANY): MD5 client
> ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1
> ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1
> ok 6 AO server (INADDR_ANY): unsigned client
> ok 7 AO server (AO_REQUIRED): AO client: connected
> ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6
> ok 9 AO server (AO_REQUIRED): unsigned client
> ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2
> ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1
> ok 12 MD5 server (INADDR_ANY): AO client
> ok 13 MD5 server (INADDR_ANY): MD5 client: connected
> ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks
> ok 15 MD5 server (INADDR_ANY): no sign client
> ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1
> ok 17 no sign server: AO client
> ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2
> ok 19 no sign server: MD5 client
> ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2
> ok 21 no sign server: no sign client: connected
> ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1
> ok 23 AO+MD5 server: AO client (matching): connected
> ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10
> ok 25 AO+MD5 server: AO client (misconfig, matching MD5)
> ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3
> ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4
> ok 28 AO+MD5 server: AO client (misconfig, non-matching)
> ok 29 AO+MD5 server: MD5 client (matching): connected
> ok 30 AO+MD5 server: MD5 client (matching): no counter checks
> ok 31 AO+MD5 server: MD5 client (misconfig, matching AO)
> ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3
> ok 33 AO+MD5 server: MD5 client (misconfig, non-matching)
> ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4
> ok 35 AO+MD5 server: no sign client (unmatched): connected
> ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1
> ok 37 AO+MD5 server: no sign client (misconfig, matching AO)
> ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3
> ok 39 AO+MD5 server: no sign client (misconfig, matching MD5)
> ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2
> ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented
> ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks
> ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented
> ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks
> ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected
> ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14
> ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected
> ok 48 TCP-MD5 established: add TCP-AO key: no counter checks
> ok 49 non-signed established: add TCP-AO key: postfailed as expected
> ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1
> ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service
> ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service
> ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service
> ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service
> ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service
> ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N)
> ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0)
> ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service
> ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0)
> ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N)
> ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service
> ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service
> # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify corner-cases for UAPI.
Sample output:
> # ./setsockopt-closed_ipv4
> 1..120
> # 1657[lib/setup.c:254] rand seed 1681938184
> TAP version 13
> ok 1 AO add: minimum size
> ok 2 AO add: extended size
> ok 3 AO add: null optval
> ok 4 AO del: minimum size
> ok 5 AO del: extended size
> ok 6 AO del: null optval
> ok 7 AO set info: minimum size
> ok 8 AO set info: extended size
> ok 9 AO info get: : extended size
> ok 10 AO set info: null optval
> ok 11 AO get info: minimum size
> ok 12 AO get info: extended size
> ok 13 AO get info: null optval
> ok 14 AO get info: null optlen
> ok 15 AO get keys: minimum size
> ok 16 AO get keys: extended size
> ok 17 AO get keys: null optval
> ok 18 AO get keys: null optlen
> ok 19 key add: too big keylen
> ok 20 key add: using reserved padding
> ok 21 key add: using reserved2 padding
> ok 22 key add: wrong address family
> ok 23 key add: port (unsupported)
> ok 24 key add: no prefix, addr
> ok 25 key add: no prefix, any addr
> ok 26 key add: prefix, any addr
> ok 27 key add: too big prefix
> ok 28 key add: too short prefix
> ok 29 key add: bad key flags
> ok 30 key add: add current key on a listen socket
> ok 31 key add: add rnext key on a listen socket
> ok 32 key add: add current+rnext key on a listen socket
> ok 33 key add: add key and set as current
> ok 34 key add: add key and set as rnext
> ok 35 key add: add key and set as current+rnext
> ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 37 key add: non-existent VRF
> ok 38 optmem limit was hit on adding 69 key
> ok 39 key add: maclen bigger than TCP hdr
> ok 40 key add: bad algo
> ok 41 key del: using reserved padding
> ok 42 key del: using reserved2 padding
> ok 43 key del: del and set current key on a listen socket
> ok 44 key del: del and set rnext key on a listen socket
> ok 45 key del: del and set current+rnext key on a listen socket
> ok 46 key del: bad key flags
> ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 48 key del: non-existent VRF
> ok 49 key del: set non-exising current key
> ok 50 key del: set non-existing rnext key
> ok 51 key del: set non-existing current+rnext key
> ok 52 key del: set current key
> ok 53 key del: set rnext key
> ok 54 key del: set current+rnext key
> ok 55 key del: set as current key to be removed
> ok 56 key del: set as rnext key to be removed
> ok 57 key del: set as current+rnext key to be removed
> ok 58 key del: async on non-listen
> ok 59 key del: non-existing sndid
> ok 60 key del: non-existing rcvid
> ok 61 key del: incorrect addr
> ok 62 key del: correct key delete
> ok 63 AO info set: set current key on a listen socket
> ok 64 AO info set: set rnext key on a listen socket
> ok 65 AO info set: set current+rnext key on a listen socket
> ok 66 AO info set: using reserved padding
> ok 67 AO info set: using reserved2 padding
> ok 68 AO info set: accept_icmps
> ok 69 AO info get: accept_icmps
> ok 70 AO info set: ao required
> ok 71 AO info get: ao required
> ok 72 AO info set: ao required with MD5 key
> ok 73 AO info set: set non-existing current key
> ok 74 AO info set: set non-existing rnext key
> ok 75 AO info set: set non-existing current+rnext key
> ok 76 AO info set: set current key
> ok 77 AO info get: set current key
> ok 78 AO info set: set rnext key
> ok 79 AO info get: set rnext key
> ok 80 AO info set: set current+rnext key
> ok 81 AO info get: set current+rnext key
> ok 82 AO info set: set counters
> ok 83 AO info get: set counters
> ok 84 AO info set: no-op
> ok 85 AO info get: no-op
> ok 86 get keys: no ao_info
> ok 87 get keys: proper tcp_ao_get_mkts()
> ok 88 get keys: set out-only pkt_good counter
> ok 89 get keys: set out-only pkt_bad counter
> ok 90 get keys: bad keyflags
> ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX
> ok 92 get keys: using reserved field
> ok 93 get keys: no prefix, addr
> ok 94 get keys: no prefix, any addr
> ok 95 get keys: prefix, any addr
> ok 96 get keys: too big prefix
> ok 97 get keys: too short prefix
> ok 98 get keys: prefix + addr
> ok 99 get keys: get_all + prefix
> ok 100 get keys: get_all + addr
> ok 101 get keys: get_all + sndid
> ok 102 get keys: get_all + rcvid
> ok 103 get keys: current + prefix
> ok 104 get keys: current + addr
> ok 105 get keys: current + sndid
> ok 106 get keys: current + rcvid
> ok 107 get keys: rnext + prefix
> ok 108 get keys: rnext + addr
> ok 109 get keys: rnext + sndid
> ok 110 get keys: rnext + rcvid
> ok 111 get keys: get_all + current
> ok 112 get keys: get_all + rnext
> ok 113 get keys: current + rnext
> ok 114 key add: duplicate: full copy
> ok 115 key add: duplicate: any addr key on the socket
> ok 116 key add: duplicate: add any addr key
> ok 117 key add: duplicate: add any addr for the same subnet
> ok 118 key add: duplicate: full copy of a key
> ok 119 key add: duplicate: RecvID differs
> ok 120 key add: duplicate: SendID differs
> # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide functions to create selftests dedicated to TCP-AO.
They can run in parallel, as they use temporary net namespaces.
They can be very specific to the feature being tested.
This will allow to create a lot of TCP-AO tests, without complicating
one binary with many --options and to create scenarios, that are
hard to put in bash script that uses one binary.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phylink_parse_mode() populates all possible supported link modes for a
given phy_interface_t, for the case where a phylib phy may be absent and
we can't retrieve the supported link modes from that.
Russell points out that since the introduction of the generic validation
helpers phylink_get_capabilities() and phylink_caps_to_linkmodes(), we
can rewrite this procedure to populate the pl->supported mask, so that
instead of spelling out the link modes, we derive an intermediary
mac_capabilities bit field, and we convert that to the equivalent link
modes.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp/dccp: refine source port selection
This patch series leverages IP_LOCAL_PORT_RANGE option
to no longer favor even source port selection at connect() time.
This should lower time taken by connect() for hosts having
many active connections to the same destination.
====================
Link: https://lore.kernel.org/r/20231214192939.1962891-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 1580ab63fc9a ("tcp/dccp: better use of ephemeral ports in connect()")
we added an heuristic to select even ports for connect() and odd ports for bind().
This was nice because no applications changes were needed.
But it added more costs when all even ports are in use,
when there are few listeners and many active connections.
Since then, IP_LOCAL_PORT_RANGE has been added to permit an application
to partition ephemeral port range at will.
This patch extends the idea so that if IP_LOCAL_PORT_RANGE is set on
a socket before accept(), port selection no longer favors even ports.
This means that connect() can find a suitable source port faster,
and applications can use a different split between connect() and bind()
users.
This should give more entropy to Toeplitz hash used in RSS: Using even
ports was wasting one bit from the 16bit sport.
A similar change can be done in inet_csk_find_open_port() if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change inet_sk_get_local_port_range() to return a boolean,
telling the callers if the port range was provided by
IP_LOCAL_PORT_RANGE socket option.
Adds documentation while we are at it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231214192939.1962891-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Defining the size of register regions is not really in scope of what
bindings need to cover. The schema for this is also not completely correct
as a reg entry can be variable number of cells for the address and size,
but the schema assumes 1 cell.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231213232455.2248056-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
netlink: specs: prep legacy specs for C code gen
Minor adjustments to some specs to make them ready for C code gen.
v2:
- fix MAINATINERS and subject of patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We assume in handful of places that the name of the spec is
the same as the name of the family. We could fix that but
it seems like a fair assumption to make. Rename the MPTCP
spec instead.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Align the enum-names of OVS with what's actually in the uAPI.
Either correct the names, or mark the enum as empty because
the values are in fact #defines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Op's "attributes" list is a workaround for families with a single
attr set. We don't want to render a single huge request structure,
the same for each op since we know that most ops accept only a small
set of attributes. "Attributes" list lets us narrow down the attributes
to what op acctually pays attention to.
It doesn't make sense to put names of fixed headers in there.
They are not "attributes" and we can't really narrow down the struct
members.
Remove the fixed header fields from attrs for ovs families
in preparation for C codegen support.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
add v2 FW logging for ice driver
Paul Stillwell says:
Firmware (FW) log support was added to the ice driver, but that version is
no longer supported. There is a newer version of FW logging (v2) that
adds more control knobs to get the exact data out of the FW
for debugging.
The interface for FW logging is debugfs. This was chosen based on
discussions here:
https://lore.kernel.org/netdev/20230214180712.53fc8ba2@kernel.org/ and
https://lore.kernel.org/netdev/20231012164033.1069fb4b@kernel.org/
We talked about using devlink in a variety of ways, but none of those
options made any sense for the way the FW reports data. We briefly talked
about using ethtool, but that seemed to go by the wayside. Ultimately it
seems like using debugfs is the way to go so re-implement the code to use
that.
FW logging is across all the PFs on the device so restrict the commands to
only PF0.
If the device supports FW logging then a directory named 'fwlog' will be
created under '/sys/kernel/debug/ice/<pci_dev>'. A variety of files will be
created to manage the behavior of logging. The following files will be
created:
- modules/<module>
- nr_messages
- enable
- log_size
- data
where
modules/<module> is used to read/write the log level for a specific module
nr_messages is used to determine how many events should be in each message
sent to the driver
enable is used to start/stop FW logging. This is a boolean value so only 1
or 0 are permissible values
log_size is used to configure the amount of memory the driver uses for log
data
data is used to read/clear the log data
Generally there is a lot of data and dumping that data to syslog will
result in a loss of data. This causes problems when decoding the data and
the user doesn't know that data is missing until later. Instead of dumping
the FW log output to syslog use debugfs. This ensures that all the data the
driver has gets retrieved correctly.
The FW log data is binary data that the FW team decodes to determine what
happened in firmware. The binary blob is sent to Intel for decoding.
---
v6:
- use seq_printf() for outputting module info when reading from 'module' file
- replace code that created argc and argv for handling command line input
- removed checks in all the _read() and _write() functions to see if FW logging
is supported because the files will not exist if it is not supported
- removed warnings on allocation failures on debugfs file creation failures
- removed a newline between memory allocation and checking if the memory was
allocated
- fixed cases where we could just return the value from a function call
instead of saving the value in a variable
- moved the check for PFO in ice_fwlog_init() to an earlier patch
- reworked all of argument scanning in the _write() functions in ice_debugfs.c
to remove adding characters past the end of the buffer
v5: https://lore.kernel.org/netdev/20231205211251.2122874-1-anthony.l.nguyen@intel.com/
- changed the log level configuration from a single file for all modules to a
file per module.
- changed 'nr_buffs' to 'log_size' because users understand memory sizes
better than a number of buffers
- changed 'resolution' to 'nr_messages' to better reflect what it represents
- updated documentation to reflect these changes
- updated documentation to indicate that FW logging must be disabled to
clear the data. also clarified that any value written to the 'data' file will
clear the data
v4: https://lore.kernel.org/netdev/20231005170110.3221306-1-anthony.l.nguyen@intel.com/
- removed CONFIG_DEBUG_FS wrapper around code because the debugfs calls handle
this case already
- moved ice_debugfs_exit() call to remove unreachable code issue
- minor changes to documentation based on feedback
v3: https://lore.kernel.org/netdev/20230815165750.2789609-1-anthony.l.nguyen@intel.com/
- Adjust error path cleanup in ice_module_init() for unreachable code.
v2: https://lore.kernel.org/netdev/20230810170109.1963832-1-anthony.l.nguyen@intel.com/
- Rewrote code to use debugfs instead of devlink
v1: https://lore.kernel.org/netdev/20230209190702.3638688-1-anthony.l.nguyen@intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
