Commit Graph

159 Commits

Author SHA1 Message Date
e533cda12d Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
 "As usual, most of the changes are to devicetrees.

  Besides smaller fixes, some refactorings and cleanups, some of the new
  platforms and chips (or significant features) supported are below:

  Broadcom boards:
   - Cisco Meraki MR32 (BCM53016-based)
   - BCM2711 (RPi4) display pipeline support

  Actions Semi boards:
   - Caninos Loucos Labrador SBC (S500-based)
   - RoseapplePi SBC (S500-based)

  Allwinner SoCs/boards:
   - A100 SoC with Perf1 board
   - Mali, DMA, Cetrus and IR support for R40 SoC

  Amlogic boards:
   - Libretch S905x CC V2 board
   - Hardkernel ODROID-N2+ board

  Aspeed boards/platforms:
   - Wistron Mowgli (AST2500-based, Power9 OpenPower server)
   - Facebook Wedge400 (AST2500-based, ToR switch)

  Hisilicon SoC:
   - SD5203 SoC

  Nvidia boards:
   - Tegra234 VDK, for pre-silicon Orin SoC

  NXP i.MX boards:
   - Librem 5 phone
   - i.MX8MM DDR4 EVK
   - Variscite VAR-SOM-MX8MN SoM
   - Symphony board
   - Tolino Shine 2 HD
   - TQMa6 SoM
   - Y Soft IOTA Orion

  Rockchip boards:
   - NanoPi R2S board
   - A95X-Z2 board
   - more Rock-Pi4 variants

  STM32 boards:
   - Odyssey SOM board (STM32MP157CAC-based)
   - DH DRC02 board

  Toshiba SoCs/boards:
   - Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
  ARM: dts: nspire: Fix SP804 users
  arm64: dts: lg: Fix SP804 users
  arm64: dts: lg: Fix SP805 clocks
  ARM: mstar: Fix up the fallout from moving the dts/dtsi files
  ARM: mstar: Add mstar prefix to all of the dtsi/dts files
  ARM: mstar: Add interrupt to pm_uart
  ARM: mstar: Add interrupt controller to base dtsi
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
  ARM: dts: hisilicon: add SD5203 dts
  ARM: dts: hisilicon: fix the system controller compatible nodes
  arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
  arm64: dts: zynqmp: Remove undocumented u-boot properties
  arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
  arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
  ...
2020-10-24 10:44:18 -07:00
2e368dd2bb Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
2020-10-24 10:39:22 -07:00
3fec0eaaf0 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
 "This contains no changes to the core framework. It is a collection of
  various clk driver updates.

  The biggest driver updates in terms of lines of code is the Allwinner
  driver, closely followed by the Qualcomm and Mediatek drivers. All of
  those hit high because we add so many lines of clk data. Coming in
  fourth place is i.MX which also adds a bunch of clk data. This
  accounts for the new driver additions this time around.

  Otherwise the patches are lots of little cleanups and fixes for
  various clk drivers that have baked in linux-next for a while. I
  suppose one highlight or theme is that more clk drivers are being
  updated to work as modules, which is interesting to see such critical
  SoC infrastructure work as a loadable module.

  New Drivers:
   - Support qcom SM8150/SM8250 video and display clks
   - Support Mediatek MT8167 clks
   - Add clock for CRC block found on vf610 SoCs
   - Add support for the Renesas R-Car V3U (R8A779A0) SoC
   - Add support for the VSP for Resizing clock on Renesas RZ/G1H
   - Support Allwinner A100 SoC clks

  Removed Drivers:
   - Remove i.MX21 clock driver, as i.MX21 platform support is being
     dropped

  Updates:
   - Change how qcom's display port clks work
   - Small non-critical fixes for TI clk driver
   - Remove various unused variables in clk drivers
   - Allow Rockchip clk driver to be a module
   - Remove most __clk_lookup() calls in Samsung drivers (yay!)
   - Support building i.MX ARMv8 platforms clock driver as module
   - Some kerneldoc fixes here and there
   - A couple of minor i.MX clk data corrections
   - Update audio clock inverter and fdiv2 flag on Amlogic g12
   - Make amlogic clk drivers configurable in Kconfig
   - Fix Renesas VSP clock names to match corrected hardware
     documentation
   - Sigma-delta modulation on Allwinner R40
   - Various fixes for at91 clk driver
   - Use semicolons instead of commas in some places
   - Mark some variables const so they can move to RO memory"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
  clk: imx8mq: Fix usdhc parents order
  clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
  clk: Restrict CLK_HSDK to ARC_SOC_HSDK
  clk: at91: sam9x60: support only two programmable clocks
  clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
  clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
  clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
  clk: ingenic: Use readl_poll_timeout instead of custom loop
  clk: ingenic: Use to_clk_info() macro for all clocks
  clk: bcm2835: add missing release if devm_clk_hw_register fails
  clk: at91: clk-sam9x60-pll: remove unused variable
  clk: at91: clk-main: update key before writing AT91_CKGR_MOR
  clk: at91: remove the checking of parent_name
  clk: clk-prima2: fix return value check in prima2_clk_init()
  clk: mmp2: Fix the display clock divider base
  clk: pxa: Constify static struct clk_ops
  clk: baikal-t1: Mark Ethernet PLL as critical
  clk: qoriq: modify MAX_PLL_DIV to 32
  clk: axi-clkgen: Set power bits for fractional mode
  clk: axi-clkgen: Add support for fractional dividers
  ...
2020-10-22 12:53:28 -07:00
cbc111d155 dt-bindings: reset: imx8mq: add m4 reset
Add the m4 reset used by the remoteproc driver

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-09-23 14:25:31 +02:00
a297104ace dt-bindings: reset: Updated binding for Versal reset driver
Added documentation and Versal reset indices to describe
about Versal reset driver bindings.
In Versal all reset indices includes Class, SubClass, Type, Index
information whereas class refers to clock, reset, power etc.,
Underlying firmware in Versal have such classification and expects
the ID to be this way.
[13:0] - Index bits
[19:14] - Type bits
[25:20] - SubClass bits
[31:26] - Class bits.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-09-23 14:25:31 +02:00
639448912b arm64: tegra: Initial Tegra234 VDK support
The NVIDIA Tegra234 VDK is a simulation platform for the Orin SoC. It
supports a subset of the peripherals that will be available in the final
chip and serves as a bootstrapping platform.

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-18 15:58:07 +02:00
fb038ce4db clk: sunxi-ng: add support for the Allwinner A100 CCU
Add support for a100 in the sunxi-ng CCU framework.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com
2020-08-25 10:52:18 +02:00
242841992a dt-bindings: reset: Add a binding for the RPi Firmware reset controller
The firmware running on the RPi VideoCore can be used to reset and
initialize HW controlled by the firmware.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-2-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18 13:01:10 +02:00
05a5b5d8a2 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
 "Here's some more updates that missed the last pull request because I
  happened to tag the tree at an earlier point in the history of
  clk-next. I must have fat fingered it and checked out an older version
  of clk-next on this second computer I'm using.

  This time it actually includes more code for Qualcomm SoCs, the AT91
  major updates, and some Rockchip SoC clk driver updates as well. I've
  corrected this flow so this shouldn't happen again"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits)
  clk: bcm2835: Do not use prediv with bcm2711's PLLs
  clk: drop unused function __clk_get_flags
  clk: hsdk: Fix bad dependency on IOMEM
  dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180
  clk: mmp: avoid missing prototype warning
  clk: sparx5: Add Sparx5 SoC DPLL clock driver
  dt-bindings: clock: sparx5: Add bindings include file
  clk: qoriq: add LS1021A core pll mux options
  clk: clk-atlas6: fix return value check in atlas6_clk_init()
  clk: tegra: pll: Improve PLLM enable-state detection
  clk: X1000: Add support for calculat REFCLK of USB PHY.
  clk: JZ4780: Reformat the code to align it.
  clk: JZ4780: Add functions for enable and disable USB PHY.
  clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
  dt-bindings: clock: Add tabs to align code.
  dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.
  clk: davinci: Use fallthrough pseudo-keyword
  clk: imx: Use fallthrough pseudo-keyword
  clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk
  clk: qcom: gcc-sdm660: Add missing modem reset
  ...
2020-08-12 12:19:49 -07:00
fac1d443a2 dt-bindings: reset: Add binding constants for Actions S500 RMU
Add device tree binding constants for Actions Semi S500 SoC Reset
Management Unit (RMU).

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/daf615160b3be9f38dcf7926cc82128c9c2d73e3.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21 01:50:46 -07:00
ffebbecaaa reset: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-07-20 11:27:12 +02:00
6f630784cc Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...
2020-06-10 11:42:19 -07:00
9d71d3cd9e Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...
2020-06-04 20:02:14 -07:00
166e4b4841 Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next
- Support IDT VersaClock 5P49V5925
 - Bunch of updates for HSDK clock generation unit (CGU) driver
 - New clk driver for Baikal-T1 SoCs

* clk-vc5:
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965

* clk-hsdk:
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first

* clk-mediatek:
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC

* clk-baikal:
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
2020-06-01 13:00:56 -07:00
11ea09b9e2 dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
After being gained by the CCU PLLs the signals must be transformed to
be suitable for the clock-consumers. This is done by a set of dividers
embedded into the CCU. A first block of dividers is used to create
reference clocks for AXI-bus of high-speed peripheral IP-cores of the
chip. The second block dividers alter the PLLs output signals to be then
consumed by SoC peripheral devices. Both block DT nodes are ordinary
clock-providers with standard set of properties supported. But in addition
to that each clock provider can be used to reset the corresponding clock
domain. This makes the AXI-bus and System Devices CCU DT nodes to be also
reset-providers.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-30 11:04:35 -07:00
34a07a8da3 Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.8

Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
  (S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits)
  arm64: dts: meson-g12b-gtking-pro: add initial device-tree
  dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
  arm64: dts: meson-g12b-gtking: add initial device-tree
  dt-bindings: arm: amlogic: add support for the Beelink GT-King
  arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
  arm64: dts: meson: add ethernet interrupt to wetek dtsi
  arm64: dts: meson: add support for the Smartlabs SML-5442TW
  dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW
  dt-bindings: add vendor prefix for Smartlabs LLC
  arm64: dts: meson: g12: add internal DAC glue
  arm64: dts: meson: g12: add internal DAC
  arm64: dts: meson: libretech-pc: add internal DAC support
  arm64: dts: meson: libretech-ac: add internal DAC support
  arm64: dts: meson: libretech-cc: add internal DAC support
  arm64: dts: meson: p230-q200: add internal DAC support
  arm64: dts: meson: gxl: add acodec support
  arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
  dt-bindings: arm: amlogic: add odroid-c4 bindings
  arm64: dts: meson-sm1: add cpu thermal nodes
  arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
  ...

Link: https://lore.kernel.org/r/5ec6f56a.1c69fb81.fc5d5.9ca6@mx.google.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26 00:20:16 +02:00
4c71d6abc4 clk: qcom: Add DT bindings for MSM8939 GCC
Add compatible strings and the include files for the MSM8939 GCC.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lkml.kernel.org/r/20200512115023.2856617-2-bryan.odonoghue@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-14 14:31:33 -07:00
3a5fc2520b dt-bindings: reset: meson: add gxl internal dac reset
Add the reset line of the internal DAC found on the amlogic gxl SoC family

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
c4e181d6fe dt-bindings: reset: imx7: Document usage on i.MX8MP SoC
The driver now supports i.MX8MP, so update bindings accordingly.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
ecd910f442 dt-bindings: reset: imx7: Add support for i.MX8MN
i.MX8MN can reuse i.MX8MQ's reset driver, update the compatible
property and related info to support i.MX8MN.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-05-06 12:03:43 +02:00
378788120b dt-bindings: reset: rtd1295: Add SB2 reset
Add a constant for reset3 SB2, based on downstream crt_sys_reg.h.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2020-04-12 23:59:30 +02:00
63313c1ceb dt-bindings: reset: Add Realtek RTD1195
Add a header with symbolic reset indices for Realtek RTD1195 SoC.
Naming was derived from BSP register description headers.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2020-04-12 23:59:24 +02:00
eab3540562 Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - Nvidia: Fuse support for Tegra194, continued memory controller
     pieces for Tegra30

   - NXP/FSL: Refactorings of QuickEngine drivers to support
     ARM/ARM64/PPC

   - NXP/FSL: i.MX8MP SoC driver pieces

   - TI Keystone: ring accelerator driver

   - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.

   - Xilinx ZynqMP: feature checking interface for firmware. Mailbox
     communication for power management

   - Overall support patch set for cpuidle on more complex hierarchies
     (PSCI-based)

  and misc cleanups, refactorings of Marvell, TI, other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
  drivers: soc: xilinx: Use mailbox IPI callback
  dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
  drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
  MAINTAINERS: Add brcmstb PCIe controller entry
  soc/tegra: fuse: Unmap registers once they are not needed anymore
  soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
  soc/tegra: fuse: Warn if straps are not ready
  soc/tegra: fuse: Cache values of straps and Chip ID registers
  memory: tegra30-emc: Correct error message for timed out auto calibration
  memory: tegra30-emc: Firm up hardware programming sequence
  memory: tegra30-emc: Firm up suspend/resume sequence
  soc/tegra: regulators: Do nothing if voltage is unchanged
  memory: tegra: Correct reset value of xusb_hostr
  soc/tegra: fuse: Add APB DMA dependency for Tegra20
  bus: tegra-aconnect: Remove PM_CLK dependency
  dt-bindings: mediatek: add MT6765 power dt-bindings
  soc: mediatek: cmdq: delete not used define
  memory: tegra: Add support for the Tegra194 memory controller
  memory: tegra: Only include support for enabled SoCs
  memory: tegra: Support DVFS on Tegra186 and later
  ...
2020-02-08 14:04:19 -08:00
f4a6365ae8 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
 "There are a few changes to the core framework this time around, in
  addition to the normal collection of driver updates to support new
  SoCs, fix incorrect data, and convert various drivers to clk_hw based
  APIs.

  In the core, we allow clk_ops::init() to return an error code now so
  that we can fail clk registration if the callback does something like
  fail to allocate memory. We also add a new "terminate" clk_op so that
  things done in clk_ops::init() can be undone, e.g. free memory. We
  also spit out a warning now when critical clks fail to enable and we
  support changing clk rates and enable/disable state through debugfs
  when developers compile the kernel themselves.

  On the driver front, we get support for what seems like a lot of
  Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
  There are a couple new drivers for Xilinx and Amlogic SoCs too. The
  updates are all small things like fixing the way glitch free muxes
  switch parents, avoiding div-by-zero problems, or fixing data like
  parent names. See the updates section below for more details.

  Finally, the "basic" clk types have been converted to support
  specifying parents with clk_hw pointers. This work includes an
  overhaul of the fixed-rate clk type to be more modern by using clk_hw
  APIs.

  Core:
   - Let clk_ops::init() return an error code
   - Add a clk_ops::terminate() callback to undo clk_ops::init()
   - Warn about critical clks that fail to enable or prepare
   - Support dangerous debugfs actions on clks with dead code

  New Drivers:
   - Support for Xilinx Versal platform clks
   - Display clk controller on qcom sc7180
   - Video clk controller on qcom sc7180
   - Graphics clk controller on qcom sc7180
   - CPU PLLs for qcom msm8916
   - Move qcom msm8974 gfx3d clk to RPM control
   - Display port clk support on qcom sdm845 SoCs
   - Global clk controller on qcom ipq6018
   - Add a driver for BCLK of Freescale SAI cores
   - Add cam, vpe and sgx clock support for TI dra7
   - Add aess clock support for TI omap5
   - Enable clks for CPUfreq on Allwinner A64 SoCs
   - Add Amlogic meson8b DDR clock controller
   - Add input clocks to Amlogic meson8b controllers
   - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
   - i.MX8MP clk driver support

  Updates:
   - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
     based APIs
   - Detect more PRMCU variants in ux500 driver
   - Adjust the composite clk type to new way of describing clk parents
   - Fixes for clk controllers on qcom msm8998 SoCs
   - Fix gmac main clock for TI dra7
   - Move TI dra7-atl clock header to correct location
   - Fix hidden node name dependency on TI clkctrl clocks
   - Fix Amlogic meson8b mali clock update using the glitch free mux
   - Fix Amlogic pll driver division by zero at init
   - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
     symbols
   - Switch more i.MX clk drivers to clk_hw based APIs
   - Disable non-functional divider between pll4_audio_div and
     pll4_post_div on imx6q
   - Fix watchdog2 clock name typo in imx7ulp clock driver
   - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
     SoCs
   - Suppress bind attrs for i.MX8M clock driver
   - Add a big comment in imx8qxp-lpcg driver to tell why
     devm_platform_ioremap_resource() shouldn't be used for the driver
   - A correction on i.MX8MN usb1_ctrl parent clock setting"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
  dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
  clk: ls1028a: Fix warning on clamp() usage
  clk: qoriq: add ls1088a hwaccel clocks support
  clk: ls1028a: Add clock driver for Display output interface
  dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
  clk: fsl-sai: new driver
  dt-bindings: clock: document the fsl-sai driver
  clk: composite: add _register_composite_pdata() variants
  clk: qcom: rpmh: Sort OF match table
  dt-bindings: fix warnings in validation of qcom,gcc.yaml
  dt-binding: fix compilation error of the example in qcom,gcc.yaml
  clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
  clk: zynqmp: Fix divider calculation
  clk: zynqmp: Add support for get max divider
  clk: zynqmp: Warn user if clock user are more than allowed
  clk: zynqmp: Extend driver for versal
  dt-bindings: clock: Add bindings for versal clock driver
  clk: ti: clkctrl: Fix hidden dependency to node name
  clk: ti: add clkctrl data dra7 sgx
  clk: ti: omap5: Add missing AESS clock
  ...
2020-02-03 22:10:18 +00:00
d15b1ff1bd clk: qcom: Add DT bindings for ipq6018 gcc clock controller
Add the compatible strings and the include file for ipq6018
gcc clock controller.

Co-developed-by: Anusha Canchi Ramachandra Rao <anusharao@codeaurora.org>
Signed-off-by: Anusha Canchi Ramachandra Rao <anusharao@codeaurora.org>
Co-developed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Link: https://lkml.kernel.org/r/1578557121-423-2-git-send-email-sricharan@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-01-09 12:42:54 -08:00
a5df0d4e9d dt-bindings: reset: Add binding constants for NPCM7xx reset controller
Add device tree binding constants for Nuvoton BMC NPCM7xx
reset controller.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-02 12:25:05 +01:00
4881873f4c dt-bindings: reset: meson8b: fix duplicate reset IDs
According to the public S805 datasheet the RESET2 register uses the
following bits for the PIC_DC, PSC and NAND reset lines:
- PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3)
- PSC is at bit 4 (meaning: RESET_VD_RMEM + 4)
- NAND is at bit 5 (meaning: RESET_VD_RMEM + 4)

Update the reset IDs of these three reset lines so they don't conflict
with PIC_DC and map to the actual hardware reset lines.

Fixes: 79795e20a1 ("dt-bindings: reset: Add bindings for the Meson SoC Reset Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-09 15:21:20 -08:00
eb275167d1 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson:
 "As always, the bulk of updates.  Some of the news this cycle:

  New SoC descriptions:
   - Broadcom BCM2711
   - Amlogic Meson A1 and G12
   - Freescale S32V234
   - Marvell Armada AP807/AP807-quad and CP115
   - Realtek RTD1293 and RTD1296
   - Rockchip RK3308

  New boards and platforms:
   - Allwinner: NanoPi Duo2
   - Amlogic: Ugoos am6
   - Atmel at91: Overkiz Kizbox2/4
   - Broadcom: RPi4, Luxul XWC-2000
   - Marvell: New Espressobin flavor
   - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix
     E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and
     OPOS6ULDev
   - Renesas: Salvator-XS
   - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits)
  ARM: dts: logicpd-torpedo: Disable USB Host
  arm: dts: mt6323: add keys, power-controller, rtc and codec
  arm64: dts: mt8183: add systimer0 device node
  dt-bindings: mediatek: update bindings for MT8183 systimer
  arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc
  arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.
  arm64: dts: rockchip: Add Beelink A1
  dt-bindings: ARM: rockchip: Add Beelink A1
  arm64: dts: rockchip: Add RK3328 audio pipelines
  arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports
  arm64: dts: ti: k3-j721e-main: add USB controller nodes
  ARM: dts: aspeed-g6: Add timer description
  ARM: dts: aspeed: ast2600evb: Enable i2c buses
  ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
  dt-bindings: arm: at91: Document Kizbox2-2 board binding
  arm64: dts: meson-gx: fix i2c compatible
  arm64: dts: meson-gx: cec node should be disabled by default
  arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
  arm64: dts: meson-gxm: fix gpu irq order
  arm64: dts: meson-g12a: fix gpu irq order
  ...
2019-12-05 12:09:47 -08:00
ec939e4c94 Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...
2019-12-05 11:43:31 -08:00
5588aa81d2 Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.5

Hightlights
- new board; ugoos am6, based on G12B SoC
- g12: add thermal driver and cooling properties
- sm1: enable audio on SEI610 board
- IR: add several keymaps
- sdio: add keep-power-in-suspend property for multiple boards
- pcie: add support for G12A
- multiple fixes, cleanups

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (62 commits)
  arm64: dts: meson-gx: fix i2c compatible
  arm64: dts: meson-gx: cec node should be disabled by default
  arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
  arm64: dts: meson-gxm: fix gpu irq order
  arm64: dts: meson-g12a: fix gpu irq order
  ARM64: dts: amlogic: adds crypto hardware node
  arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymap
  arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap
  arm64: dts: meson: g12b: add cooling properties
  arm64: dts: meson: g12a: add cooling properties
  arm64: dts: meson: g12: Add minimal thermal zone
  arm64: dts: meson: g12: add temperature sensor
  arm64: dts: meson: sei610: enable audio
  arm64: dts: meson: sm1: add audio devices
  dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
  dt-bindings: clk: axg-audio: add sm1 bindings
  arm64: dts: meson-g12: add support for simplefb
  arm64: dts: meson: g12a: add audio devices resets
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
  arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
  ...

Link: https://lore.kernel.org/r/7hd0dzs0m1.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-10 21:29:06 -08:00
4df56a1eb1 dt-bindings: reset: Add Realtek RTD1295
Add a header with symbolic reset indices for Realtek RTD1295 SoC.
Naming was derived from reset-names in an OEM's Device Tree.

Acked-by: Rob Herring <robh@kernel.org>
[AF: Dropped RTD1295 specific binding definition, updated SPDX]
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2019-10-29 05:13:02 +01:00
f21ab7906d Merge tag 'clk-meson-dt-v5.5-1' of git://github.com/BayLibre/clk-meson into v5.5/dt64-redo
First round of amlogic DT binding clock update target for v5.5

Add the audio clock and reset bindings for the sm1 SoC family

* tag 'clk-meson-dt-v5.5-1' of git://github.com/BayLibre/clk-meson:
  dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
  dt-bindings: clk: axg-audio: add sm1 bindings
2019-10-16 10:02:25 -07:00
5d9730b9eb dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller
Add DT bindings for the Meson-A1 SoC Reset Controller include file,
and also slightly update documentation.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-08 15:12:46 +02:00
aa03ea9bce dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
Add the reset id of the sm1 audio clock controller

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-10-08 09:28:08 +02:00
c2016cc612 reset: dt-bindings: meson: update arb bindings for sm1
SM1 SoC family adds two new audio FIFOs with the related arb reset lines

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-03 19:56:51 +02:00
a703d279c5 Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
 "We have a small collection of core framework updates this time, mostly
  around clk registration by clk providers and debugfs "nice to haves"
  for rate constraints. I'll highlight that we're now setting the
  clk_init_data pointer inside struct clk_hw to NULL during
  clk_register(), which may break some drivers that thought they could
  use that pointer during normal operations. That change has been
  sitting in next for a while now but maybe something is still broken.
  We'l see. Other than that the core framework changes aren't invasive
  and they're fixing bugs, simplifying, and making things better.

  On the clk driver side we got the usual addition of new SoC support,
  new features for existing drivers, and bug fixes scattered throughout.
  The biggest diffstat is the Amlogic driver that gained CPU clk support
  in addition to migrating to the new way of specifying clk parents.
  After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got
  support for various new SoCs and clock controllers from those vendors.

  Core:
   - Drop NULL checks in clk debugfs
   - Add min/max rates to clk debugfs
   - Set clk_init_data pointer inside clk_hw to NULL after registration
   - Make clk_bulk_get_all() return an 'id' corresponding to clock-names
   - Evict parents from parent cache when they're unregistered

  New Drivers:
   - Add clock driver for i.MX8MN SoCs
   - Support aspeed AST2600 SoCs
   - Support for Mediatek MT6779 SoCs
   - Support qcom SM8150 GCC and RPMh clks
   - Support qcom QCS404 WCSS clks
   - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)
   - Addition of clock driver for Rockchip rk3308 SoCs

  Updates:
   - Add regulator support to the cdce925 clk driver
   - Add support for Raspberry Pi 4 bcm2711 SoCs
   - Add SDIO gate support to aspeed driver
   - Add missing of_node_put() calls in various clk drivers
   - Migrate Amlogic driver to new clock parent description method
   - Add DVFS support to Amlogic Meson g12
   - Add Amlogic Meson g12a reset support to the axg audio clock controller
   - Add sm1 support to the Amlogic Meson g12a clock controller
   - Switch i.MX8MM clock driver to platform driver
   - Add Hifi4 DSP related clocks for i.MX8QXP SoC
   - Fix Audio PLL setting and parent clock for USB
   - Misc i.MX8 clock driver improvements and corrections
   - Set floor ops for Qualcomm SD clks so that rounding works
   - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1
   - Enable the Allwinner V3 SoC and fix the i2s clock for H6"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: Drop !clk checks in debugfs dumping
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: mvebu: ap80x: add AP807 clock support
  clk: mvebu: ap806: Prepare the introduction of AP807 clock support
  clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
  clk: mvebu: ap806: be more explicit on what SaR is
  clk: mvebu: ap80x-cpu: add AP807 CPU clock support
  clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
  dt-bindings: ap806: Document AP807 clock compatible
  dt-bindings: ap80x: Document AP807 CPU clock compatible
  clk: sprd: add missing kfree
  clk: at91: allow 24 Mhz clock as input for PLL
  clk: Make clk_bulk_get_all() return a valid "id"
  clk: actions: Fix factor clk struct member access
  clk: qcom: rcg: Return failure for RCG update
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  ...
2019-09-20 15:45:07 -07:00
a1ff1ce300 Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration

* clk-init-destroy:
  clk: Overwrite clk_hw::init with NULL during clk_register()
  clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
  clk: ti: Don't reference clk_init_data after registration
  clk: qcom: Remove error prints from DFS registration
  rtc: sun6i: Don't reference clk_init_data after registration
  clk: zx296718: Don't reference clk_init_data after registration
  clk: milbeaut: Don't reference clk_init_data after registration
  clk: socfpga: deindent code to proper indentation
  phy: ti: am654-serdes: Don't reference clk_init_data after registration
  clk: sprd: Don't reference clk_init_data after registration
  clk: socfpga: Don't reference clk_init_data after registration
  clk: sirf: Don't reference clk_init_data after registration
  clk: qcom: Don't reference clk_init_data after registration
  clk: meson: axg-audio: Don't reference clk_init_data after registration
  clk: lochnagar: Don't reference clk_init_data after registration
  clk: actions: Don't reference clk_init_data after registration

* clk-doc:
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  clk: Document of_parse_clkspec() some more
  clk: Remove extraneous 'for' word in comments

* clk-imx: (32 commits)
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: imx: imx8mn: fix audio pll setting
  clk: imx8mn: Add necessary frequency support for ARM PLL table
  clk: imx8mn: Add missing rate_count assignment for each PLL structure
  clk: imx8mn: fix int pll clk gate
  clk: imx8mn: Add GIC clock
  clk: imx8mn: Fix incorrect parents
  clk: imx8mm: Fix incorrect parents
  clk: imx8mq: Fix sys3 pll references
  clk: imx8mq: Unregister clks when of_clk_add_provider failed
  clk: imx8mm: Unregister clks when of_clk_add_provider failed
  clk: imx8mq: Mark AHB clock as critical
  clk: imx8mn: Keep uart clocks on for early console
  clk: imx: Remove unused function statement
  clk: imx7ulp: Make sure earlycon's clock is enabled
  clk: imx8mm: Switch to platform driver
  clk: imx: imx8mm: fix audio pll setting
  ...

* clk-allwinner:
  clk: sunxi-ng: h6: Allow I2S to change parent rate
  clk: sunxi-ng: v3s: add Allwinner V3 support
  clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
  dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
  clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19 15:31:27 -07:00
e3a008ac12 Merge tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:

 - a bunch of DT binding conversions to DT schema format

 - clean-ups of the Arm idle-states binding

 - support a default number of cells in of_for_each_phandle() when the
   cells name is missing

 - expose dtbs_check and dt_binding_check in the make help

 - convert writting-schema.md to ReST

 - HiSilicon reset controller binding updates

 - add documentation for MT8516 RNG

* tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits)
  of: restore old handling of cells_name=NULL in of_*_phandle_with_args()
  bus: qcom: fix spelling mistake "ambigous" -> "ambiguous"
  of: Let of_for_each_phandle fallback to non-negative cell_count
  iommu: pass cell_count = -1 to of_for_each_phandle with cells_name
  dt-bindings: arm: Convert Realtek board/soc bindings to json-schema
  dt-bindings: arm: Convert Actions Semi bindings to jsonschema
  dt-bindings: Correct spelling in example schema
  dt-bindings: cpu: Add a support cpu type for cortex-a55
  dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible
  dt-bindings: arm: idle-states: Move exit-latency-us explanation
  dt-bindings: arm: idle-states: Add punctuation to improve readability
  dt-bindings: arm: idle-states: Correct "constraint guarantees"
  dt-bindings: arm: idle-states: Correct references to wake-up delay
  dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently
  pinctrl-mcp23s08: Fix property-name in dt-example
  dt-bindings: Clarify interrupts-extended usage
  dt-bindings: Convert Arm Mali Utgard GPU to DT schema
  dt-bindings: Convert Arm Mali Bifrost GPU to DT schema
  dt-bindings: Convert Arm Mali Midgard GPU to DT schema
  dt-bindings: irq: Convert Allwinner NMI Controller to a schema
  ...
2019-09-19 13:48:37 -07:00
cef7298262 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
 "This is another huge branch with close to 450 changessets related to
  devicetree files, roughly half of this for 32-bit and 64-bit
  respectively. There are lots of cleanups and additional hardware
  support for platforms we already support based on SoCs from Renesas,
  ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
  other manufacturers.

  A total of 6 new SoCs and 37 new boards gets added this time, one more
  SoC will come in a follow-up branch. Most of the new boards are for
  64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.

  Going more into details for SoC platforms with new hardware support:

   - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
     platform, usually paired with an external 5G modem. So far we only
     support the Qualcomm SM8150 MTP reference platform, but no actual
     products.

   - For the slightly older Qualcomm platforms, support for several
     interesting products is getting added: Three laptops based on
     Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
     630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
     and several phones based on the older Snapdragon 410/MSM8916
     (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
     aka Wileyfox Swift).

   - Mediatek MT7629 is a new wireless network router chip, similar to
     the older MT7623. It gets added together with the reference board
     implementation.

   - Allwinner V3 is a repackaged version of the existing low-end V3s
     chip, and is used in the tiny Lichee Pi Zero plus, also added here.
     There is also a new TV set-top box based on Allwinner H6, the Tanix
     TX6, and the eMMC variant of the Olimex A64-Olinuxino development
     board.

   - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
     family, similar to the i.MX8M Mini. As usual, there is a large
     number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
     SolidRun Hummingboard Pulse baseboard and System-on-Module,
     Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
     PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
     Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
     phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
     Innovations i.MX7 RMU2 board.

   - In a different NXP product line, the Layerscape LS1046A "Freeway"
     reference board gets added.

   - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
     their set-top-box line and smart speaker with newer CPU and GPU
     cores compared to their predecessors. Both are now also supported
     by the Khadas VIM3 development board series, and the dts files for
     that get reorganized a bit to better deal with all variants.
     Another board based on SM1 that gets added is the SEI Robotics
     SEI610.

   - There are a handful of new x86 and Power9 server boards using
     Aspeed BMC chips that are gaining support for running Linux on the
     BMC through the OpenBMC project: Facebook
     Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
     these are still new machines using SoCs based on the ARM9 and ARM11
     CPU cores, as support for the new Cortex-A7 based AST2600 is still
     ramping up.

   - There are three new end-user products using 32-bit Rockchips SoCs:
     Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
     low-end RK3229 chip, while the two AOpen products Chromebox Mini
     (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
     commercial settings(digital signage, PoS, ...).

   - One more single-board computer based on the popular 64-bit RK3399
     is added: the Leez RK3399 P710"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
  arm64: dts: qcom: Add Lenovo Yoga C630
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  ...
2019-09-16 15:56:22 -07:00
f02bd65a5b Merge tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.4 (round 2)
- new board: Khadas VIM3L (SM1/S905D3 SoC)
- support power domains on G12[AB] and SM1 SoCs
- DT binding fixups based on YAML schema
- add a bunch of remote control keymap
- enable DVFS on SM1/SEI610 board

* tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (44 commits)
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  arm64: dts: meson: g12a: audio clock controller provides resets
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: meson-gxm-khadas-vim2: use rc-khadas keymap
  arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymap
  arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymap
  arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymap
  arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymap
  arm64: dts: meson-g12a-x96-max: add rc-x96max keymap
  arm64: dts: meson-g12b-odroid-n2: add rc-odroid keymap
  arm64: dts: meson-sm1-sei610: add USB support
  arm64: dts: meson-sm1-sei610: add HDMI display support
  arm64: dts: meson-g12: add Everything-Else power domain controller
  arm64: dts: meson: fix boards regulators states format
  arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format
  ...

Link: https://patchwork.kernel.org/patch/11122331/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 23:16:39 +02:00
cc212241df arm: dts: mediatek: add basic support for MT7629 SoC
This adds basic support for MT7629 reference board.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-22 11:22:17 +02:00
5f912f7ced dt-bindings: reset: hisilicon: Add ao reset controller
This is required to bring Mali450 gpu out of reset.

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-20 08:13:47 -05:00
0688587a71 dt-bindings: clock: meson: add resets to the audio clock controller
Add the documentation and bindings for the resets provided by the g12a
audio clock controller

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-08-20 11:50:30 +02:00
0ed4c252bf clk: sunxi-ng: v3s: add Allwinner V3 support
Allwinner V3 has the same main die with V3s, but with more pins wired.
There's a I2S bus on V3 that is not available on V3s.

Add the V3-only peripheral's clocks and reset to the V3s CCU driver,
bound to a new V3 compatible string. The driver name is not changed
because it's part of the device tree binding (the header file name).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-08-12 10:05:48 +02:00
fb0d72c7ac dt-bindings: reset: amlogic,meson8b-reset: update with SPDX Licence identifier
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01 11:01:58 +02:00
b16a006365 dt-bindings: reset: amlogic,meson-gxbb-reset: update with SPDX Licence identifier
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01 11:01:57 +02:00
942b4c10b1 dt-bindings: reset: Fix typo in imx8mq resets
Some of the mipi dsi resets were called

  IMX8MQ_RESET_MIPI_DIS__

instead of

  IMX8MQ_RESET_MIPI_DSI__

Since they're DSI related this looks like a typo. This fixes the
only in tree user as well to not break bisecting.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01 10:49:18 +02:00
e2557157a9 dt-bindings: reset: imx7: Add support for i.MX8MM
i.MX8MM can reuse i.MX8MQ's reset driver, update the compatible
property and related info to support i.MX8MM.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-01 10:49:07 +02:00
8c0993621c Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into arm/drivers
Reset controller changes for v5.3

This tag adds support for the Bitmain BM1880 reset controller to the
reset-simple driver and fixes a spelling mistake in the i.MX7 reset
controller binding document.

* tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  reset: Add reset controller support for BM1880 SoC
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller

Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-04 07:05:23 -07:00
9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00