IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
gcc-11 complains about a prototype declaration that is different
from the function definition:
drivers/isdn/capi/kcapi.c:724:44: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
724 | u16 capi20_get_manufacturer(u32 contr, u8 *buf)
| ~~~~^~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:62:43: note: previously declared as an array ‘u8[64]’ {aka ‘unsigned char[64]’}
62 | u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/isdn/capi/kcapi.c:790:38: error: argument 2 of type ‘u8 *’ {aka ‘unsigned char *’} declared as a pointer [-Werror=array-parameter=]
790 | u16 capi20_get_serial(u32 contr, u8 *serial)
| ~~~~^~~~~~
In file included from drivers/isdn/capi/kcapi.c:13:
drivers/isdn/capi/kcapi.h:64:37: note: previously declared as an array ‘u8[8]’ {aka ‘unsigned char[8]’}
64 | u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
| ~~~^~~~~~~~~~~~~~~~~~~~~~~
Change the definition to make them match.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ic_close_dev contains a generalization of the logic to not close a
network interface if it's the host port for a DSA switch. This logic is
disguised behind an iteration through the lowers of ic_dev in
ic_close_dev.
When no interface for ipconfig can be found, ic_dev is NULL, and
ic_close_dev:
- dereferences a NULL pointer when assigning selected_dev
- would attempt to search through the lower interfaces of a NULL
net_device pointer
So we should protect against that case.
The "lower_dev" iterator variable was shortened to "lower" in order to
keep the 80 character limit.
Fixes: f68cbaed67cb ("net: ipconfig: avoid use-after-free in ic_close_devs")
Fixes: 46acf7bdbc72 ("Revert "net: ipv4: handle DSA enabled master network devices"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There ended up being two sections with the same title. Combine the two
into one section.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/subsytem/subsystem/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOMMU errors have been reported if WoL is enabled and interface is
brought down. It turned out that the network chip triggers DMA
transfers after the DMA buffers have been freed. For WoL to work we
need to leave rx enabled, therefore simply stop the chip from being
a DMA busmaster.
Fixes: 567ca57faa62 ("r8169: add rtl8169_up")
Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmBWTS8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqbuDB/0ZGZMjbNdB4CLkEdiCSSBjdJTONqSt
1SfxaFZUggWv0CTKY+L8VVIzUqeSIV4VEIU347zTwAAqZNpoZ90c6gcrzYGPN1YW
yHwvlOESLno51bNxNgkSQRkR5mCBTP+uYsejBTpisgG9kRNpZ8D6iNMeS7Iczm4L
93b/qhDQCPn4OUetq9ozutY0FRpOirrIntwikyrVix/Ih+A3t1lV6gA79557IU0u
uGSuIuHzyhk5X7KVBQbaJu4S6pU8VIKWdJJNQd8iZwX3/6awMCoAigpy+i7HM129
Ha5+wN4TbdPnpeM+qVoVRniursBKXQL6E2baMH7AZCVRm4cf8DP7rd/r
=S4/o
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.12-20210320' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-03-20
this is a pull request of 2 patches for net/master.
The first patch is by Oliver Hartkopp. He fixes the TX-path in the
ISO-TP protocol by properly initializing the outgoing CAN frames.
The second patch is by me and reverts a patch from my previous pull
request which added MODULE_SUPPORTED_DEVICE to the peak_usb driver. In
the mean time in Linus's tree the entirely MODULE_SUPPORTED_DEVICE was
removed. So this reverts the adding of the new MODULE_SUPPORTED_DEVICE
to avoid the merge conflict.
If you prefer to resolve the merge conflict by hand, I'll send a new
pull request without that patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
ipa: fix validation
There is sanity checking code in the IPA driver that's meant to be
enabled only during development. This allows the driver to make
certain assumptions, but not have to verify those assumptions are
true at (operational) runtime. This code is built conditional on
IPA_VALIDATION, set (if desired) inside the IPA makefile.
Unfortunately, this validation code has some errors. First, there
are some mismatched arguments supplied to some dev_err() calls in
ipa_cmd_table_valid() and ipa_cmd_header_valid(), and these are
exposed if validation is enabled. Second, the tag that enables
this conditional code isn't used consistently (it's IPA_VALIDATE
in some spots and IPA_VALIDATION in others).
This series fixes those two problems with the conditional validation
code.
Version 2 removes the two patches that introduced ipa_assert(). It
also modifies the description in the first patch so that it mentions
the changes made to ipa_cmd_table_valid().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them. This way we avoid having to check for errors
when we actually program the hardware.
Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.
There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it. Add this missing check.
Rearrange the way we ensure the header table fits in overall IPA
memory range.
Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-20
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).
The main changes are:
1) Use correct nops in fexit trampoline, from Stanislav.
2) Fix BTF dump, from Jean-Philippe.
3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 6417f03132a6 ("module: remove never implemented
MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was
removed from the kerne entirely. Shortly before this patch was applied
mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten
supported devices") was added to net/master. As this would result in a
merge conflict, let's revert this patch.
Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices")
Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de
Suggested-by: Leon Romanovsky <leon@kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit d4eb538e1f48 ("can: isotp: TX-path: ensure that CAN frame flags are
initialized") ensured the TX flags to be properly set for outgoing CAN
frames.
In fact the root cause of the issue results from a missing initialization
of outgoing CAN frames created by isotp. This is no problem on the CAN bus
as the CAN driver only picks the correctly defined content from the struct
can(fd)_frame. But when the outgoing frames are monitored (e.g. with
candump) we potentially leak some bytes in the unused content of
struct can(fd)_frame.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210319100619.10858-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
__bpf_arch_text_poke does rewrite only for atomic nop5, emit_nops(xxx, 5)
emits non-atomic one which breaks fentry/fexit with k8 atomics:
P6_NOP5 == P6_NOP5_ATOMIC (0f1f440000 == 0f1f440000)
K8_NOP5 != K8_NOP5_ATOMIC (6666906690 != 6666666690)
Can be reproduced by doing "ideal_nops = k8_nops" in "arch_init_ideal_nops()
and running fexit_bpf2bpf selftest.
Fixes: e21aa341785c ("bpf: Fix fexit trampoline.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210320000001.915366-1-sdf@google.com
Jean-Philippe Brucker says:
====================
Fix an issue with the libbpf BTF dump, see patch 1 for details.
Since [v1] I added the selftest in patch 2, though I couldn't figure out
a way to make it independent from the order in which debug info is
issued by the compiler.
[v1]: https://lore.kernel.org/bpf/20210318122700.396574-1-jean-philippe@linaro.org/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Bpftool used to issue forward declarations for a struct used as part of
a pointer to array, which is invalid. Add a test to check that the
struct is fully defined in this case:
@@ -134,9 +134,9 @@
};
};
-struct struct_in_array {};
+struct struct_in_array;
-struct struct_in_array_typed {};
+struct struct_in_array_typed;
typedef struct struct_in_array_typed struct_in_array_t[2];
@@ -189,3 +189,7 @@
struct struct_with_embedded_stuff _14;
};
+struct struct_in_array {};
+
+struct struct_in_array_typed {};
+
...
#13/1 btf_dump: syntax:FAIL
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org
The vmlinux.h generated from BTF is invalid when building
drivers/phy/ti/phy-gmii-sel.c with clang:
vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’
61702 | const struct reg_field (*regfields)[3];
| ^~~~~~~~~
bpftool generates a forward declaration for this struct regfield, which
compilers aren't happy about. Here's a simplified reproducer:
struct inner {
int val;
};
struct outer {
struct inner (*ptr_to_array)[2];
} A;
After build with clang -> bpftool btf dump c -> clang/gcc:
./def-clang.h:11:23: error: array has incomplete element type 'struct inner'
struct inner (*ptr_to_array)[2];
Member ptr_to_array of struct outer is a pointer to an array of struct
inner. In the DWARF generated by clang, struct outer appears before
struct inner, so when converting BTF of struct outer into C, bpftool
issues a forward declaration to struct inner. With GCC the DWARF info is
reversed so struct inner gets fully defined.
That forward declaration is not sufficient when compilers handle an
array of the struct, even when it's only used through a pointer. Note
that we can trigger the same issue with an intermediate typedef:
struct inner {
int val;
};
typedef struct inner inner2_t[2];
struct outer {
inner2_t *ptr_to_array;
} A;
Becomes:
struct inner;
typedef struct inner inner2_t[2];
And causes:
./def-clang.h:10:30: error: array has incomplete element type 'struct inner'
typedef struct inner inner2_t[2];
To fix this, clear through_ptr whenever we encounter an intermediate
array, to make the inner struct part of a strong link and force full
declaration.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org
The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01
should be inner ECT(0) + outer ECT(1). Based on the description of
__INET_ECN_decapsulate, the final decapsulate value should be
ECT(1). So fix the test expect value to 0x01.
Before the fix:
TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL]
Expected to capture 10 packets, got 0.
After the fix:
TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ]
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mailing list for MPTCP maintenance has moved to the
kernel.org-supported mptcp@lists.linux.dev address.
Complete, combined archives for both lists are now hosted at
https://lore.kernel.org/mptcp
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-03-19
This series contains updates to e1000e and igb drivers.
Tom Seewald fixes duplicate guard issues by including the driver name in
the guard for e1000e and igb.
Jesse adds checks that timestamping is on and valid to avoid possible
issues with a misinterpreted time stamp for igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.
Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL)
This is due to tx_fifo_size being 0, since this value is used to compute valid
MTU range.
Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
I have used values from datasheets.
After this patch, setting a non-default MTU (like 1000) value works and network is still useable.
Tested-on: sun8i-h3-orangepi-pc
Tested-on: sun8i-r40-bananapi-m2-ultra
Tested-on: sun50i-a64-bananapi-m64
Tested-on: sun50i-h5-nanopi-neo-plus2
Tested-on: sun50i-h6-pine-h64
Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the USB host controller is EHCI, the throughput is reduced from
300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to
32K.
According to the EHCI spec, the maximum size of the qTD is 20K.
Therefore, when the driver uses more than 20K buffer, the latency
time of EHCI would be increased. And, it let the RTL8153A get worse
throughput.
However, the driver uses alloc_pages() for rx buffer, so I limit
the rx buffer to 16K rather than 20K.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923
Fixes: ec5791c202ac ("r8152: separate the rx buffer size")
Reported-by: Robert Davies <robdavies1977@gmail.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.
So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:
https://bugzilla.kernel.org/show_bug.cgi?id=212227
As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:
unregister_netdevice: waiting for xxx to become free. Usage count = 1
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8e9fa ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of checks to make sure timestamping is on and that the
timestamp value from DMA is valid. This avoids any functional issues
that could come from a misinterpreted time stamp.
One of the functions changed doesn't need a return value added because
there was no value in checking from the calling locations.
While here, fix a couple of reverse christmas tree issues next to
the code being changed.
Fixes: f56e7bba22fa ("igb: Pull timestamp from fragment before adding it to skb")
Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The include guard "_E1000_HW_H_" is used by two separate header files in
two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the
same include guard macro in more than one header file may cause
unexpected behavior from the compiler. Fix this by renaming the
duplicate guard in the igb driver.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The include guard "_E1000_HW_H_" is used by header files in three
different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h).
Using the same include guard macro in more than one header file may
cause unexpected behavior from the compiler. Fix the duplicate include
guard in the e1000e driver by renaming it.
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set the disconnected flag before releasing the data interface in case
netdev registration fails to avoid having the disconnect callback try to
deregister the never registered netdev (and trigger a WARN_ON()).
Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
__dev_alloc_name(), when supplied with a name containing '%d',
will search for the first available device number to generate a
unique device name.
Since commit ff92741270bf8b6e78aa885f166b68c7a67ab13a ("net:
introduce name_node struct to be used in hashlist") network
devices may have alternate names. __dev_alloc_name() does take
these alternate names into account, possibly generating a name
that is already taken and failing with -ENFILE as a result.
This demonstrates the bug:
# rmmod dummy 2>/dev/null
# ip link property add dev lo altname dummy0
# modprobe dummy numdummies=1
modprobe: ERROR: could not insert 'dummy': Too many open files in system
Instead of creating a device named dummy1, modprobe fails.
Fix this by checking all the names in the d->name_node list, not just d->name.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support")
removed last selector of CONFIG_MV64X60.
As it is not a user selectable config item, all references to it
are stale. Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hariprasad Kelam says:
====================
octeontx2: miscellaneous fixes
This series of patches fixes various issues related to NPC MCAM entry
management, debugfs, devlink, CGX LMAC mapping, RSS config etc
Change-log:
v2:
Fixed below review comments
- corrected Fixed tag syntax with 12 digits SHA1
and providing space between SHA1 and subject line
- remove code improvement patch
- make commit description more clear
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
unmapping npc counter works in a way by traversing all mcam
entries to find which mcam rule is associated with counter.
But loop cursor variable 'entry' is not incremented before
checking next mcam entry which resulting in infinite loop.
This in turn hogs the kworker thread forever and no other
mbox message is processed by AF driver after that.
Fix this by updating entry value before checking next
mcam entry.
Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RSS configuration can not be get/set when interface is in down state
as they required mbox communication. RSS enable flag status
is used for set/get configuration. Current code do not clear the
RSS enable flag on interface down which lead to mbox error while
trying to set/get RSS configuration.
Fixes: 85069e95e531 ("octeontx2-pf: Receive side scaling support")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current devlink code try to free already freed irqs as the
irq_allocate flag is not cleared after free leading to kernel
crash while removing rvu driver. The patch fixes the irq free
sequence and clears the irq_allocate flag on free.
Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CGX receive buffer size is a constant value and
cannot be read from CGX0 block always since
CGX0 may not enabled everytime. Hence return CGX
receive buffer size from first enabled CGX block
instead of CGX0.
Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: MTU configuration")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MKEX profile describes what packet fields need to be extracted from
the input packet and how to place those packet fields in the output key
for MCAM matching. The MKEX profile can be in a way where higher layer
packet fields can overwrite lower layer packet fields in output MCAM
Key.
Hence MKEX profile is always ensured that there are no overlaps between
any of the layers. But the commit 42006910b5ea
("octeontx2-af: cleanup KPU config data") introduced TX TOS field which
overlaps with DMAC in MCAM key.
This led to AF driver returning error when TX rule is installed with
DMAC as match criteria since DMAC gets overwritten and cannot be
supported. This patch fixes the issue by removing TOS field from MKEX TX
profile.
Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses
below structure to read number of rules from the driver.
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
__u64 data;
struct ethtool_rx_flow_spec fs;
union {
__u32 rule_cnt;
__u32 rss_context;
};
__u32 rule_locs[0];
};
Driver must not modify rule_cnt member. But currently driver
modifies it by modifying rss_context. Hence fix it by using a
local variable.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting
netsec") netsec_netdev_init() power downs phy before resetting the
controller. However, the state is not restored once the reset is
complete. As a result it is not possible to bring up network on a
platform with Broadcom BCM5482 phy.
Fix the issue by restoring phy power state after controller reset is
complete.
Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec")
Cc: stable@vger.kernel.org
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3.
Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out
https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
lists potential issues.
Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.
Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.
Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.
Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest for commit e21aa341785c ("bpf: Fix fexit trampoline.")
to make sure that attaching fexit prog to a sleeping kernel function
will trigger appropriate trampoline and program destruction.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210318004523.55908-1-alexei.starovoitov@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the flowtable has been previously removed in this batch, skip the
hook overlap checks. This fixes spurious EEXIST errors when removing and
adding the flowtable in the same batch.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Otherwise, there exists a small window between the opening and closing
of the socket fd where it may leak into processes launched by some other
thread.
Fixes: 949abbe88436 ("libbpf: add function to setup XDP")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210317115857.6536-1-memxor@gmail.com
When it failed to get section names, it should call into
bpf_object__elf_finish() like others.
Fixes: 88a82120282b ("libbpf: Factor out common ELF operations and improve logging")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210317145414.884817-1-namhyung@kernel.org
Currently flowtable's GC work is initialized as deferrable, which
means GC cannot work on time when system is idle. So the hardware
offloaded flow may be deleted for timeout, since its used time is
not timely updated.
Resolve it by initializing the GC work as delayed work instead of
deferrable.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Honor flowtable flags from the control update path. Disallow disabling
to toggle hardware offload support though.
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Error was not set accordingly.
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
