IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit bd9966de4e14fb559e89a06f7f5c9aab2cc028b9 ]
Using 'struct loaded_vmcs*' to track whether the CPU registers
contain host or guest state kills two birds with one stone.
1. The (effective) boolean host_state.loaded is poorly named.
It does not track whether or not host state is loaded into
the CPU registers (which most readers would expect), but
rather tracks if host state has been saved AND guest state
is loaded.
2. Using a loaded_vmcs pointer provides a more robust framework
for the optimized guest/host state switching, especially when
consideration per-VMCS enhancements. To that end, WARN_ONCE
if we try to switch to host state with a different VMCS than
was last used to save host state.
Resolve an occurrence of the new WARN by setting loaded_vmcs after
the call to vmx_vcpu_put() in vmx_switch_vmcs().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 53a53f8687faf492df2644d8c18ff0217fc18730 ]
[Why]
If there is no program explicitly setting the backlight
brightness (for example, during a minimal install of linux), the
hardware defaults to maximum brightness but the backlight_device
defaults to 0 value. Thus, settings displays the wrong brightness
value.
[How]
When creating the backlight device, set brightness to max
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 640332d1a089909df08bc9f3e42888a2019c66e2 ]
PWM2 is commonly used to control voltage of PWM regulator of VDD_LOG in
RK3399. On the Firefly-RK3399 board, PWM2 outputs 40 KHz square wave
from power on and the VDD_LOG is about 0.9V. When the kernel boots
normally into the system, the PWM2 keeps outputing PWM signal.
But the kernel hangs randomly after "Starting kernel ..." line on that
board. When it happens, PWM2 outputs high level which causes VDD_LOG
drops to 0.4V below the normal operating voltage.
By adding "pclk_rkpwm_pmu" to the rk3399_pmucru_critical_clocks array,
PWM clock is ensured to be prepared at startup and the PWM2 output is
normal. After repeated tests, the early boot hang is gone.
This patch works on both Firefly-RK3399 and ROC-RK3399-PC boards.
Signed-off-by: Levin Du <djw@t-chip.com.cn>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 74e96bf44f430cf7a01de19ba6cf49b361cdfd6e ]
The global mce data buffer that used to copy rtas error log is of 2048
(RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read
extended_log_length from rtas error log header, then use max of
extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied.
Ideally the platform (phyp) will never send extended error log with
size > 2048. But if that happens, then we have a risk of buffer overrun
and corruption. Fix this by using min_t instead.
Fixes: d368514c3097 ("powerpc: Fix corruption when grabbing FWNMI data")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 13d3d01e26b942ada7cfced68ccb6db49597874a ]
Randy Dunlap reports UML occasionally fails to build with -j<N> and
O=<builddir> options.
make[1]: Entering directory '/home/rdunlap/mmotm-2018-0802-1529/UM64'
UPD include/generated/uapi/linux/version.h
WRAP arch/x86/include/generated/asm/dma-contiguous.h
WRAP arch/x86/include/generated/asm/export.h
WRAP arch/x86/include/generated/asm/early_ioremap.h
WRAP arch/x86/include/generated/asm/mcs_spinlock.h
WRAP arch/x86/include/generated/asm/mm-arch-hooks.h
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
WRAP arch/x86/include/generated/uapi/asm/poll.h
GEN ./Makefile
make[2]: *** No rule to make target 'archheaders'. Stop.
arch/um/Makefile:119: recipe for target 'archheaders' failed
make[1]: *** [archheaders] Error 2
make[1]: *** Waiting for unfinished jobs....
UPD include/config/kernel.release
make[1]: *** wait: No child processes. Stop.
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2
The cause of the problem is the use of '$(MAKE) KBUILD_SRC=',
which recurses to the top Makefile via the $(objtree)/Makefile
generated by scripts/mkmakefile.
When you run "make -j<N> O=<builddir> ARCH=um", Make can execute
'archheaders' and 'outputmakefile' targets simultaneously because
there is no dependency between them.
If it happens,
$(Q)$(MAKE) KBUILD_SRC= ARCH=$(HEADER_ARCH) archheaders
... tries to run $(objtree)/Makefile that is being updated.
The correct way for the recursion is
$(Q)$(MAKE) -f $(srctree)/Makefile ARCH=$(HEADER_ARCH) archheaders
..., which does not rely on the generated Makefile.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 78ee9946371f5848ddfc88ab1a43867df8f17d83 ]
Because rfi_flush_fallback runs immediately before the return to
userspace it currently runs with the user r1 (stack pointer). This
means if we oops in there we will report a bad kernel stack pointer in
the exception entry path, eg:
Bad kernel stack pointer 7ffff7150e40 at c0000000000023b4
Oops: Bad kernel stack pointer, sig: 6 [#1]
LE SMP NR_CPUS=32 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1246 Comm: klogd Not tainted 4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3 #7
NIP: c0000000000023b4 LR: 0000000010053e00 CTR: 0000000000000040
REGS: c0000000fffe7d40 TRAP: 4100 Not tainted (4.18.0-rc2-gcc-7.3.1-00175-g0443f8a69ba3)
MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000
CFAR: c00000000000bac8 IRQMASK: c0000000f1e66a80
GPR00: 0000000002000000 00007ffff7150e40 00007fff93a99900 0000000000000020
...
NIP [c0000000000023b4] rfi_flush_fallback+0x34/0x80
LR [0000000010053e00] 0x10053e00
Although the NIP tells us where we were, and the TRAP number tells us
what happened, it would still be nicer if we could report the actual
exception rather than barfing about the stack pointer.
We an do that fairly simply by loading the kernel stack pointer on
entry and restoring the user value before returning. That way we see a
regular oops such as:
Unrecoverable exception 4100 at c00000000000239c
Oops: Unrecoverable exception, sig: 6 [#1]
LE SMP NR_CPUS=32 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1251 Comm: klogd Not tainted 4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty #40
NIP: c00000000000239c LR: 0000000010053e00 CTR: 0000000000000040
REGS: c0000000f1e17bb0 TRAP: 4100 Not tainted (4.18.0-rc3-gcc-7.3.1-00097-g4ebfcac65acd-dirty)
MSR: 9000000002803031 <SF,HV,VEC,VSX,FP,ME,IR,DR,LE> CR: 44000442 XER: 20000000
CFAR: c00000000000bac8 IRQMASK: 0
...
NIP [c00000000000239c] rfi_flush_fallback+0x3c/0x80
LR [0000000010053e00] 0x10053e00
Call Trace:
[c0000000f1e17e30] [c00000000000b9e4] system_call+0x5c/0x70 (unreliable)
Note this shouldn't make the kernel stack pointer vulnerable to a
meltdown attack, because it should be flushed from the cache before we
return to userspace. The user r1 value will be in the cache, because
we load it in the return path, but that is harmless.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f5daf77a55ef0e695cc90c440ed6503073ac5e07 ]
Fix build errors and warnings in t1042rdb_diu.c by adding header files
and MODULE_LICENSE().
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: data definition has no type or storage class
early_initcall(t1042rdb_diu_init);
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: error: type defaults to 'int' in declaration of 'early_initcall' [-Werror=implicit-int]
../arch/powerpc/platforms/85xx/t1042rdb_diu.c:152:1: warning: parameter names (without types) in function declaration
and
WARNING: modpost: missing MODULE_LICENSE() in arch/powerpc/platforms/85xx/t1042rdb_diu.o
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8505c8bfd85a260c9dc5c47e15bd8c5357fcbcd2 ]
If user specifies "posix" on an SMB3.11 mount, then fail the mount
if server does not return the POSIX negotiate context indicating
support for posix.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 289131e1f1e6ad8c661ec05e176b8f0915672059 ]
For SMB2/SMB3 the number of requests sent was not displayed
in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was
enabled (only number of failed requests displayed). As
with earlier dialects, we should be displaying these
counters if CONFIG_CIFS_STATS is enabled. They
are important for debugging.
e.g. when you cat /proc/fs/cifs/Stats (before the patch)
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0
0 session 0 share reconnects
Total vfs operations: 690 maximum at one time: 2
1) \\localhost\test
SMBs: 975
Negotiates: 0 sent 0 failed
SessionSetups: 0 sent 0 failed
Logoffs: 0 sent 0 failed
TreeConnects: 0 sent 0 failed
TreeDisconnects: 0 sent 0 failed
Creates: 0 sent 2 failed
Closes: 0 sent 0 failed
Flushes: 0 sent 0 failed
Reads: 0 sent 0 failed
Writes: 0 sent 0 failed
Locks: 0 sent 0 failed
IOCTLs: 0 sent 1 failed
Cancels: 0 sent 0 failed
Echos: 0 sent 0 failed
QueryDirectories: 0 sent 63 failed
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 256b4c3f03d77d8c0dc69e3a6ceb3afd0d1810bd ]
also fixes error code in smb311_posix_mkdir() (where
the error assignment needs to go before the goto)
a typo that Dan Carpenter and Paulo and Gustavo
pointed out.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c281bc0c7412308c7ec0888904f7c99353da4796 ]
echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats
but there were four (see example below) that were not reset
(bytes read and witten, total vfs ops and max ops
at one time).
...
0 session 0 share reconnects
Total vfs operations: 100 maximum at one time: 2
1) \\localhost\test
SMBs: 0
Bytes read: 502092 Bytes written: 31457286
TreeConnects: 0 total 0 failed
TreeDisconnects: 0 total 0 failed
...
This patch fixes cifs_stats_proc_write to properly reset
those four.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f7ecb1b109da1006a08d5675debe60990e824432 ]
This patch does not change any functionality but avoids that gcc
reports the following warnings when building with W=1:
block/cfq-iosched.c: In function ?cfq_back_seek_max_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4756:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4759:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4760:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_low_latency_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4765:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4782:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
USEC_STORE_FUNCTION(cfq_slice_idle_us_store, &cfqd->cfq_slice_idle, 0, UINT_MAX);
^~~~~~~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4783:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
USEC_STORE_FUNCTION(cfq_group_idle_us_store, &cfqd->cfq_group_idle, 0, UINT_MAX);
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5941923da29e84bc9e2a1abb2c14fffaf8d71e2f ]
Fix a static code checker warning:
net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR'
The error path for ib_alloc_mr failure should set err to PTR_ERR.
Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e4237faa7213c1cc1d0aa65a44c67ba4729ce9f ]
If the resource requested by d_alloc_name is not added to the linked
list through d_add, then dput needs to be called to release the
subsequent abnormal branch to avoid resource leakage.
Add missing dput to selinuxfs.c
Signed-off-by: nixiaoming <nixiaoming@huawei.com>
[PM: tweak the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ]
There are some powerpc selftests, as tm/tm-unavailable, that run for a long
period (>120 seconds), and if it is interrupted, as pressing CRTL-C
(SIGINT), the foreground process (harness) dies but the child process and
threads continue to execute (with PPID = 1 now) in background.
In this case, you'd think the whole test exited, but there are remaining
threads and processes being executed in background. Sometimes these
zombies processes are doing annoying things, as consuming the whole CPU or
dumping things to STDOUT.
This patch fixes this problem by attaching an empty signal handler to
SIGINT in the harness process. This handler will interrupt (EINTR) the
parent process waitpid() call, letting the code to follow through the
normal flow, which will kill all the processes in the child process group.
This patch also fixes a typo.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04c532a1cdc7e423656c07937aa4b5c1c2b064f9 ]
The base address used for DMA operations on the second-level table
did incorrectly include the offset for the table entry. The offset
was then added again which lead to incorrect behavior.
Operations on the L1 table are not affected.
The calculation of the base address is changed to point to the
beginning of the L2 table.
Fixes: bfee0cf0ee1d ("iommu/omap: Use DMA-API for performing cache flushes")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f861e3e28a3016a2064d9f600eaa92a530b732b4 ]
The driver expects to find the device id in rt5677_of_match.data, however
it is currently assigned to rt5677_of_match.type. Fix this.
The problem was found with the help of clang:
sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to
zero treated as a null pointer constant of type 'const void *'
[-Wnon-literal-null-conversion]
{ .compatible = "realtek,rt5677", RT5677 },
^~~~~~
Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e083926b3e269d4064825dcf2ad50c636fddf8cf ]
The PFI subdevice flags indicate that the subdevice is readable and
writeable, but that is only true for the supported "M-series" boards,
not the older "E-series" boards. Only set the SDF_READABLE and
SDF_WRITABLE subdevice flags for the M-series boards. These two flags
are mainly for informational purposes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dfd0309fd7b30a5baffaf47b2fccb88b46d64d69 ]
pcie->realio.end should be the address of last byte of the area,
therefore using resource_size() of another resource is not correct, we
must substract 1 to get the address of the last byte.
Fixes: 11be65472a427 ("PCI: mvebu: Adapt to the new device tree layout")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3596924a233e45aa918c961a902170fc4916461b ]
The current balloon code tries to calculate a delta factor for the
balloon target when running in HVM mode in order to account for memory
used by the firmware.
This workaround for memory accounting doesn't work properly on a PVH
Dom0, that has a static-max value different from the target value even
at startup. Note that this is not a problem for DomUs because guests are
started with a static-max value that matches the amount of RAM in the
memory map.
Fix this by forcefully setting target_diff for Dom0, regardless of
it's mode.
Reported-by: Gabriel Bercarug <bercarug@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 100294cee9a98bfd4d6cb2d1c8a8aef0e959b0c4 ]
Some of fuzzers set panic_on_warn=1 so that they can handle WARN()ings
the same way they handle full-blown kernel crashes. We used WARN() in
input_alloc_absinfo() to get a better idea where memory allocation
failed, but since then kmalloc() and friends started dumping call stack on
memory allocation failures anyway, so we are not getting anything extra
from WARN().
Because of the above, let's replace WARN with dev_err(). We use dev_err()
instead of simply removing message and relying on kcalloc() to give us
stack dump so that we'd know the instance of hardware device to which we
were trying to attach input device.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 72bf75cfc00c02aa66ef6133048f37aa5d88825c ]
Error code is set in the error handling cases but never used. Fix it.
Fixes: 937e3133cd0b ("NFSv4.1: Ensure we clear the SP4_MACH_CRED flags in nfs4_sp4_select_mode()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0756c57bce3d26da2592d834d8910b6887021701 ]
We accidentally return success instead of -ENOMEM on this error path.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d263ed9926823c462f99a7679e18f0c9e5b8550d ]
Currently, we count the hctx as active after allocate driver tag
successfully. If a previously inactive hctx try to get tag first
time, it may fails and need to wait. However, due to the stale tag
->active_queues, the other shared-tags users are still able to
occupy all driver tags while there is someone waiting for tag.
Consequently, even if the previously inactive hctx is waked up, it
still may not be able to get a tag and could be starved.
To fix it, we count the hctx as active before try to allocate driver
tag, then when it is waiting the tag, the other shared-tag users
will reserve budget for it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5971b0c1594d6c34e257101ed5fdffec65205c50 ]
Since commit 63347db0affa "ACPI / scan: Use acpi_bus_get_status() to
initialize ACPI_TYPE_DEVICE devs" the status field of normal acpi_devices
gets set to 0 by acpi_bus_type_and_status() and filled with its actual
value later when acpi_add_single_object() calls acpi_bus_get_status().
This means that any acpi_match_device_ids() calls in between will always
fail with -ENOENT.
We already have a workaround for this, which temporary forces status to
ACPI_STA_DEFAULT in drivers/acpi/x86/utils.c: acpi_device_always_present()
and the next commit in this series adds another acpi_match_device_ids()
call between status being initialized as 0 and the acpi_bus_get_status()
call.
Rather then adding another workaround, this commit makes
acpi_bus_type_and_status() initialize status to ACPI_STA_DEFAULT, this is
safe to do as the only code looking at status between the initialization
and the acpi_bus_get_status() call is those acpi_match_device_ids() calls.
Note this does mean that we need to (re)set status to 0 in case the
acpi_bus_get_status() call fails.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c6553d4db03350dad0110c3224194c19df76a8f ]
Fix a panic that occurs for a device that got an error in
dasd_eckd_check_characteristics() during online processing.
For example the read configuration data command may have failed.
If this error occurs the device is not being set online and the earlier
invoked steps during online processing are rolled back. Therefore
dasd_eckd_uncheck_device() is called which needs a valid private
structure. But this pointer is not valid if
dasd_eckd_check_characteristics() has failed.
Check for a valid device->private pointer to prevent a panic.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 669f3765b755fd8739ab46ce3a9c6292ce8b3d2a ]
During offline processing two worker threads are canceled without
freeing the device reference which leads to a hanging offline process.
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27a8aea13053700ad2a08189024df7e341d1ee51 ]
The kernel BUG happens when wowl is enabled from firmware. In
brcmf_wiphy_wowl_params(), cfg is a NULL pointer because it is
drvr->config returned from wiphy_to_cfg(), and drvr->config is not set
yet. To fix it, set drvr->config before brcmf_setup_wiphy() which
calls brcmf_wiphy_wowl_params().
Fixes: 856d5a011c86 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()")
Signed-off-by: Winnie Chang <winnie.chang@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d6c02a9beb67f13d5f14f23e72fa9981e8b84477 ]
In commit ed996a52c868 ("block: simplify and cleanup bvec pool
handling"), the value of the slab index is incremented by one in
bvec_alloc() after the allocation is done to indicate an index value of
0 does not need to be later freed.
bvec_nr_vecs() was not updated accordingly, and thus returns the wrong
value. Decrement idx before performing the lookup.
Fixes: ed996a52c868 ("block: simplify and cleanup bvec pool handling")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 354b064b8ebc1e1ede58550ca9e08bfa81e6af43 ]
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b5954c ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c42d3be0c06f0c1c416054022aa535c08a1f9b39 ]
The problem is the the calculation should be "end - start + 1" but the
plus one is missing in this calculation.
Fixes: 8626816e905e ("powerpc: add support for MPIC message register API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f7a6947cd49b7ff4e03f1b4f7e7b223003d752ca ]
Currently if you build a 32-bit powerpc kernel and use get_user() to
load a u64 value it will fail to build with eg:
kernel/rseq.o: In function `rseq_get_rseq_cs':
kernel/rseq.c:123: undefined reference to `__get_user_bad'
This is hitting the check in __get_user_size() that makes sure the
size we're copying doesn't exceed the size of the destination:
#define __get_user_size(x, ptr, size, retval)
do {
retval = 0;
__chk_user_ptr(ptr);
if (size > sizeof(x))
(x) = __get_user_bad();
Which doesn't immediately make sense because the size of the
destination is u64, but it's not really, because __get_user_check()
etc. internally create an unsigned long and copy into that:
#define __get_user_check(x, ptr, size)
({
long __gu_err = -EFAULT;
unsigned long __gu_val = 0;
The problem being that on 32-bit unsigned long is not big enough to
hold a u64. We can fix this with a trick from hpa in the x86 code, we
statically check the type of x and set the type of __gu_val to either
unsigned long or unsigned long long.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc1508a579e682a1e5f1ed0753390e0aa7c23a97 ]
In function map_seq_next() of kernel/bpf/inode.c,
the first key will be the "0" regardless of the map type.
This works for array. But for hash type, if it happens
key "0" is in the map, the bpffs map show will miss
some items if the key "0" is not the first element of
the first bucket.
This patch fixed the issue by guaranteeing to get
the first element, if the seq_show is just started,
by passing NULL pointer key to map_get_next_key() callback.
This way, no missing elements will occur for
bpffs hash table show even if key "0" is in the map.
Fixes: a26ca7c982cb5 ("bpf: btf: Add pretty print support to the basic arraymap")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 504c76979bccec66e4c2e41f6a006e49e284466f ]
There is no check that allocation in axp20x_funcs_groups_from_mask
is successful.
The patch adds corresponding check and return values.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66110abc4c931f879d70e83e1281f891699364bf ]
PG_checked flag will be set on data page during GC, later, we can
recognize such page by the flag and migrate page to cold segment.
But previously, we don't clear this flag when invalidating data page,
after page redirtying, we will write it into wrong log.
Let's clear PG_checked flag in set_page_dirty() to avoid this.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92aef4675d5b1b55404e1532379e343bed0e5cf2 ]
Currently when virtio_find_single_vq fails, we go through del_vqs which
throws a warning (Trying to free already-free IRQ). Skip del_vqs if vq
allocation failed.
Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.com
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f476d7c540cb57556d3cc7e78704e6cd5100f5f ]
It may be possible to run p9_fd_cancel() with a deleted req->req_list
and incur in a double del. To fix hold the client->lock while changing
the status, so the other threads will be synchronized.
Link: http://lkml.kernel.org/r/20180723184253.6682-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+735d926e9d1317c3310c@syzkaller.appspotmail.com
To: Eric Van Hensbergen <ericvh@gmail.com>
To: Ron Minnich <rminnich@sandia.gov>
To: Latchesar Ionkov <lucho@ionkov.net>
Cc: Yiwen Jiang <jiangyiwen@huwei.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0702bc4d2fe793018ad9aa0eb14bff7f526c4095 ]
When compiling bmips with SMP disabled, the build fails with:
drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline':
drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked'
make[5]: *** [vmlinux] Error 1
Fix this by adding and setting bcm7038_l1_cpu_offline only when actually
compiling for SMP. It wouldn't have been used anyway, as it requires
CPU_HOTPLUG, which in turn requires SMP.
Fixes: 34c535793bcb ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4096165d55218a6f58b6c2ebc5d2428aa0aa70e4 ]
If there are any errors in stm32_exti_host_init() then it leads to a
NULL dereference in the callers. The function should clean up after
itself.
Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Reviewed-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4938c79bd0f5f3650c8c2cd4cdc972f0a6962ce4 ]
If you use a 64-bit compiler to build a 32-bit kernel then you'll get an
error when building the vDSO due to a library mismatch. The happens
because the relevant "-march" argument isn't supplied to the GCC run
that generates one of the vDSO intermediate files.
I'm not actually sure what the right thing to do here is as I'm not
particularly familiar with the kernel build system. I poked the
documentation and it appears that KCFLAGS is the correct thing to do
(it's suggested that should be used when building modules), but we set
KBUILD_CFLAGS in arch/riscv/Makefile.
This does at least fix the build error.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7079853c859c910b9d047a37891b4aafb8f8dd7 ]
Thread A Background GC
- f2fs_zero_range
- truncate_pagecache_range
- gc_data_segment
- get_read_data_page
- move_data_page
- set_page_dirty
- set_cold_data
- f2fs_do_zero_range
- dn->data_blkaddr = NEW_ADDR;
- f2fs_set_data_blkaddr
Actually, we don't need to set dirty & checked flag on the page, since
all valid data in the page should be zeroed by zero_range().
Use i_gc_rwsem[WRITE] to avoid such race condition.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3f4417d693b43fa240ac8bde4487f67745ca23d8 ]
The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.
In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.
Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.
Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 512ddf7d7db056edfed3159ea7cb4e4a5eefddd4 ]
If coccicheck fails, it should return an error code distinct from zero
to signal about an internal problem. Current code instead of exiting with
the tool's error code returns the error code of 'echo "coccicheck failed"'
which is almost always equals to zero, thus failing the original intention
of alerting about a problem. This patch fixes the code.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dddc0557e3a02499ce336b1e2e67f5afaecccc80 ]
[Why]
A null pointer deference can occur if crtc is null in
amdgpu_dm_crtc_handle_crc_irq. This can happen if get_crtc_by_otg_inst
returns NULL during dm_crtc_high_irq, leading to a hang in some IGT
test cases.
[How]
Check that CRTC is non-null before accessing its fields.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f0e89359775ee21fe1ea732e34edb52aef5addf ]
In commit 27d868b5e6cf ("PCI: Set MPS to match upstream bridge"), we made
sure every device's MPS setting matches its upstream bridge, making it more
likely that a hot-added device will work in a system with an optimized MPS
configuration.
Recently I've started encountering systems where the endpoint device's MPSS
capability is less than its Root Port's current MPS value, thus the
endpoint is not capable of matching its upstream bridge's MPS setting (see:
bugzilla via "Link:" below). This leaves the system vulnerable - the
upstream Root Port could respond with larger TLPs than the device can
handle, and the device will consider them to be 'Malformed'.
One could use the "pci=pcie_bus_safe" kernel parameter to work around the
issue, but that forces a user to supply a kernel parameter to get the
system to function reliably and may end up limiting MPS settings of other
unrelated, sub-topologies which could benefit from maintaining their larger
values.
Augment Keith's approach to include tuning down a Root Port's MPS setting
when its hot-added endpoint device is not capable of matching it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 60081dcc4fce385ade26d3145b2479789df0b7e5 ]
For marvell phy m88e1510, bit SUPPORTED_FIBRE of phydev->supported
is default on. Both phy_resume() and phy_suspend() will check the
SUPPORTED_FIBRE bit and write register of fibre page.
Currently in hns3 driver, the SUPPORTED_FIBRE bit will be cleared
after phy_connect_direct() finished. Because phy_resume() is called
in phy_connect_direct(), and phy_suspend() is called when disconnect
phy device, so the operation for fibre page register is not symmetrical.
It will cause phy link issue when reload hns3 driver.
This patch fixes it by disable the SUPPORTED_FIBRE before connecting
phy.
Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b089cfd95d32638335c551651a8e00fd2c4edb0b ]
Don't warn for a flush issued to a read-only device. It's not strictly
a writable command, as it doesn't change any on-media data by itself.
Reported-by: Stefan Agner <stefan@agner.ch>
Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c39d5278e62956238a681e4cfc69fae5507fc57 ]
According to the functional specification of hardware, the first
descriptor of response from command 'lookup vlan talbe' is not valid.
Currently, the first descriptor is parsed as normal value, which will
cause an expected error.
This patch fixes this problem by skipping the first descriptor.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
