IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 14cebf689a78e8a1c041138af221ef6eac6bc7da upstream.
For swiotlb allocations >= PAGE_SIZE, the slab search historically
adjusted the stride to avoid checking unaligned slots. This had the
side-effect of aligning large mapping requests to PAGE_SIZE, but that
was broken by 0eee5ae10256 ("swiotlb: fix slot alignment checks").
Since this alignment could be relied upon drivers, reinstate PAGE_SIZE
alignment for swiotlb mappings >= PAGE_SIZE.
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 823353b7cf0ea9dfb09f5181d5fb2825d727200b upstream.
When allocating pages from a restricted DMA pool in swiotlb_alloc(),
the buffer address is blindly converted to a 'struct page *' that is
returned to the caller. In the unlikely event of an allocation bug,
page-unaligned addresses are not detected and slots can silently be
double-allocated.
Add a simple check of the buffer alignment in swiotlb_alloc() to make
debugging a little easier if something has gone wonky.
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e23d7e82b707d1d0a627e334fb46370e4f772c11 upstream.
There's an issue that if special files is created before quota
project is enabled, then it's not possible to link this file. This
works fine for normal files. This happens because xfs_quota skips
special files (no ioctls to set necessary flags). The check for
having the same project ID for source and destination then fails as
source file doesn't have any ID.
mkfs.xfs -f /dev/sda
mount -o prjquota /dev/sda /mnt/test
mkdir /mnt/test/foo
mkfifo /mnt/test/foo/fifo1
xfs_quota -xc "project -sp /mnt/test/foo 9" /mnt/test
> Setting up project 9 (path /mnt/test/foo)...
> xfs_quota: skipping special file /mnt/test/foo/fifo1
> Processed 1 (/etc/projects and cmdline) paths for project 9 with recursion depth infinite (-1).
ln /mnt/test/foo/fifo1 /mnt/test/foo/fifo1_link
> ln: failed to create hard link '/mnt/test/testdir/fifo1_link' => '/mnt/test/testdir/fifo1': Invalid cross-device link
mkfifo /mnt/test/foo/fifo2
ln /mnt/test/foo/fifo2 /mnt/test/foo/fifo2_link
Fix this by allowing linking of special files to the project quota
if special files doesn't have any ID set (ID = 0).
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e812c1522dab847912309b00abcc762dd696da upstream.
syzbot reported an ext4 panic during a page fault where found a
journal handle when it didn't expect to find one. The structure
it tripped over had a value of 'TRAN' in the first entry in the
structure, and that indicates it tripped over a struct xfs_trans
instead of a jbd2 handle.
The reason for this is that the page fault was taken during a
copy-out to a user buffer from an xfs bulkstat operation. XFS uses
an "empty" transaction context for bulkstat to do automated metadata
buffer cleanup, and so the transaction context is valid across the
copyout of the bulkstat info into the user buffer.
We are using empty transaction contexts like this in XFS to reduce
the risk of failing to release objects we reference during the
operation, especially during error handling. Hence we really need to
ensure that we can take page faults from these contexts without
leaving landmines for the code processing the page fault to trip
over.
However, this same behaviour could happen from any other filesystem
that triggers a page fault or any other exception that is handled
on-stack from within a task context that has current->journal_info
set. Having a page fault from some other filesystem bounce into XFS
where we have to run a transaction isn't a bug at all, but the usage
of current->journal_info means that this could result corruption of
the outer task's journal_info structure.
The problem is purely that we now have two different contexts that
now think they own current->journal_info. IOWs, no filesystem can
allow page faults or on-stack exceptions while current->journal_info
is set by the filesystem because the exception processing might use
current->journal_info itself.
If we end up with nested XFS transactions whilst holding an empty
transaction, then it isn't an issue as the outer transaction does
not hold a log reservation. If we ignore the current->journal_info
usage, then the only problem that might occur is a deadlock if the
exception tries to take the same locks the upper context holds.
That, however, is not a problem that setting current->journal_info
would solve, so it's largely an irrelevant concern here.
IOWs, we really only use current->journal_info for a warning check
in xfs_vm_writepages() to ensure we aren't doing writeback from a
transaction context. Writeback might need to do allocation, so it
can need to run transactions itself. Hence it's a debug check to
warn us that we've done something silly, and largely it is not all
that useful.
So let's just remove all the use of current->journal_info in XFS and
get rid of all the potential issues from nested contexts where
current->journal_info might get misused by another filesystem
context.
Reported-by: syzbot+cdee56dbcdf0096ef605@syzkaller.appspotmail.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Mark Tinguely <mark.tinguely@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15922f5dbf51dad334cde888ce6835d377678dc9 upstream.
If a filesystem has a busted stripe alignment configuration on disk
(e.g. because broken RAID firmware told mkfs that swidth was smaller
than sunit), then the filesystem will refuse to mount due to the
stripe validation failing. This failure is triggering during distro
upgrades from old kernels lacking this check to newer kernels with
this check, and currently the only way to fix it is with offline
xfs_db surgery.
This runtime validity checking occurs when we read the superblock
for the first time and causes the mount to fail immediately. This
prevents the rewrite of stripe unit/width via
mount options that occurs later in the mount process. Hence there is
no way to recover this situation without resorting to offline xfs_db
rewrite of the values.
However, we parse the mount options long before we read the
superblock, and we know if the mount has been asked to re-write the
stripe alignment configuration when we are reading the superblock
and verifying it for the first time. Hence we can conditionally
ignore stripe verification failures if the mount options specified
will correct the issue.
We validate that the new stripe unit/width are valid before we
overwrite the superblock values, so we can ignore the invalid config
at verification and fail the mount later if the new values are not
valid. This, at least, gives users the chance of correcting the
issue after a kernel upgrade without having to resort to xfs-db
hacks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4c3b72a6ea93ed9c1815c74312eee9305638852 upstream.
While performing the IO fault injection test, I caught the following data
corruption report:
XFS (dm-0): Internal error ltbno + ltlen > bno at line 1957 of file fs/xfs/libxfs/xfs_alloc.c. Caller xfs_free_ag_extent+0x79c/0x1130
CPU: 3 PID: 33 Comm: kworker/3:0 Not tainted 6.5.0-rc7-next-20230825-00001-g7f8666926889 #214
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
Workqueue: xfs-inodegc/dm-0 xfs_inodegc_worker
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
xfs_free_ag_extent+0x7d3/0x1130
__xfs_free_extent+0x201/0x3c0
xfs_trans_free_extent+0x29b/0xa10
xfs_extent_free_finish_item+0x2a/0xb0
xfs_defer_finish_noroll+0x8d1/0x1b40
xfs_defer_finish+0x21/0x200
xfs_itruncate_extents_flags+0x1cb/0x650
xfs_free_eofblocks+0x18f/0x250
xfs_inactive+0x485/0x570
xfs_inodegc_worker+0x207/0x530
process_scheduled_works+0x24a/0xe10
worker_thread+0x5ac/0xc60
kthread+0x2cd/0x3c0
ret_from_fork+0x4a/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
XFS (dm-0): Corruption detected. Unmount and run xfs_repair
After analyzing the disk image, it was found that the corruption was
triggered by the fact that extent was recorded in both inode datafork
and AGF btree blocks. After a long time of reproduction and analysis,
we found that the reason of free sapce btree corruption was that the
AGF btree was not recovered correctly.
Consider the following situation, Checkpoint A and Checkpoint B are in
the same record and share the same start LSN1, buf items of same object
(AGF btree block) is included in both Checkpoint A and Checkpoint B. If
the buf item in Checkpoint A has been recovered and updates metadata LSN
permanently, then the buf item in Checkpoint B cannot be recovered,
because log recovery skips items with a metadata LSN >= the current LSN
of the recovery item. If there is still an inode item in Checkpoint B
that records the Extent X, the Extent X will be recorded in both inode
datafork and AGF btree block after Checkpoint B is recovered. Such
transaction can be seen when allocing enxtent for inode bmap, it record
both the addition of extent to the inode extent list and the removing
extent from the AGF.
|------------Record (LSN1)------------------|---Record (LSN2)---|
|-------Checkpoint A----------|----------Checkpoint B-----------|
| Buf Item(Extent X) | Buf Item / Inode item(Extent X) |
| Extent X is freed | Extent X is allocated |
After commit 12818d24db8a ("xfs: rework log recovery to submit buffers
on LSN boundaries") was introduced, we submit buffers on lsn boundaries
during log recovery. The above problem can be avoided under normal paths,
but it's not guaranteed under abnormal paths. Consider the following
process, if an error was encountered after recover buf item in Checkpoint
A and before recover buf item in Checkpoint B, buffers that have been
added to the buffer_list will still be submitted, this violates the
submits rule on lsn boundaries. So buf item in Checkpoint B cannot be
recovered on the next mount due to current lsn of transaction equal to
metadata lsn on disk. The detailed process of the problem is as follows.
First Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint A */
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
/* add buffer of agf btree block to buffer_list */
xfs_buf_delwri_queue(bp, buffer_list)
...
==> Encounter read IO error and return
/* submit buffers regardless of error */
if (!list_empty(&buffer_list))
xfs_buf_delwri_submit(&buffer_list);
<buf items of agf btree block in Checkpoint A recovery success>
Second Mount:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
/* recover buf item in Checkpoint B */
xlog_recover_buf_commit_pass2
/* buffer of agf btree block wouldn't added to
buffer_list due to lsn equal to current_lsn */
if (XFS_LSN_CMP(lsn, current_lsn) >= 0)
goto out_release
<buf items of agf btree block in Checkpoint B wouldn't recovery>
In order to make sure that submits buffers on lsn boundaries in the
abnormal paths, we need to check error status before submit buffers that
have been added from the last record processed. If error status exist,
buffers in the bufffer_list should not be writen to disk.
Canceling the buffers in the buffer_list directly isn't correct, unlike
any other place where write list was canceled, these buffers has been
initialized by xfs_buf_item_init() during recovery and held by buf item,
buf items will not be released in xfs_buf_delwri_cancel(), it's not easy
to solve.
If the filesystem has been shut down, then delwri list submission will
error out all buffers on the list via IO submission/completion and do
all the correct cleanup automatically. So shutting down the filesystem
could prevents buffers in the bufffer_list from being written to disk.
Fixes: 50d5c8d8e938 ("xfs: check LSN ordering for v5 superblocks during recovery")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75bcffbb9e7563259b7aed0fa77459d6a3a35627 upstream.
Chandan reported a AGI/AGF lock order hang on xfs/168 during recent
testing. The cause of the problem was the task running xfs_growfs
to shrink the filesystem. A failure occurred trying to remove the
free space from the btrees that the shrink would make disappear,
and that meant it ran the error handling for a partial failure.
This error path involves restoring the per-ag block reservations,
and that requires calculating the amount of space needed to be
reserved for the free inode btree. The growfs operation hung here:
[18679.536829] down+0x71/0xa0
[18679.537657] xfs_buf_lock+0xa4/0x290 [xfs]
[18679.538731] xfs_buf_find_lock+0xf7/0x4d0 [xfs]
[18679.539920] xfs_buf_lookup.constprop.0+0x289/0x500 [xfs]
[18679.542628] xfs_buf_get_map+0x2b3/0xe40 [xfs]
[18679.547076] xfs_buf_read_map+0xbb/0x900 [xfs]
[18679.562616] xfs_trans_read_buf_map+0x449/0xb10 [xfs]
[18679.569778] xfs_read_agi+0x1cd/0x500 [xfs]
[18679.573126] xfs_ialloc_read_agi+0xc2/0x5b0 [xfs]
[18679.578708] xfs_finobt_calc_reserves+0xe7/0x4d0 [xfs]
[18679.582480] xfs_ag_resv_init+0x2c5/0x490 [xfs]
[18679.586023] xfs_ag_shrink_space+0x736/0xd30 [xfs]
[18679.590730] xfs_growfs_data_private.isra.0+0x55e/0x990 [xfs]
[18679.599764] xfs_growfs_data+0x2f1/0x410 [xfs]
[18679.602212] xfs_file_ioctl+0xd1e/0x1370 [xfs]
trying to get the AGI lock. The AGI lock was held by a fstress task
trying to do an inode allocation, and it was waiting on the AGF
lock to allocate a new inode chunk on disk. Hence deadlock.
The fix for this is for the growfs code to hold the AGI over the
transaction roll it does in the error path. It already holds the AGF
locked across this, and that is what causes the lock order inversion
in the xfs_ag_resv_init() call.
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Fixes: 46141dc891f7 ("xfs: introduce xfs_ag_shrink_space()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b2f459d86252619448455013f581836c8b1b7da upstream.
A data corruption problem was reported by CoreOS image builders
when using reflink based disk image copies and then converting
them to qcow2 images. The converted images failed the conversion
verification step, and it was isolated down to the fact that
qemu-img uses SEEK_HOLE/SEEK_DATA to find the data it is supposed to
copy.
The reproducer allowed me to isolate the issue down to a region of
the file that had overlapping data and COW fork extents, and the
problem was that the COW fork extent was being reported in it's
entirity by xfs_seek_iomap_begin() and so skipping over the real
data fork extents in that range.
This was somewhat hidden by the fact that 'xfs_bmap -vvp' reported
all the extents correctly, and reading the file completely (i.e. not
using seek to skip holes) would map the file correctly and all the
correct data extents are read. Hence the problem is isolated to just
the xfs_seek_iomap_begin() implementation.
Instrumentation with trace_printk made the problem obvious: we are
passing the wrong length to xfs_trim_extent() in
xfs_seek_iomap_begin(). We are passing the end_fsb, not the
maximum length of the extent we want to trim the map too. Hence the
COW extent map never gets trimmed to the start of the next data fork
extent, and so the seek code treats the entire COW fork extent as
unwritten and skips entirely over the data fork extents in that
range.
Link: https://github.com/coreos/coreos-assembler/issues/3728
Fixes: 60271ab79d40 ("xfs: fix SEEK_DATA for speculative COW fork preallocation")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e610e856b938a1fc86e7ee83ad2f39716082bca7 upstream.
When the kernel is in lockdown mode, debugfs will only show files that
are world-readable and cannot be written, mmaped, or used with ioctl.
That more or less describes the scrub stats file, except that the
permissions are wrong -- they should be 0444, not 0644. You can't write
the stats file, so the 0200 makes no sense.
Meanwhile, the clear_stats file is only writable, but it got mode 0400
instead of 0200, which would make more sense.
Fix both files so that they make sense.
Fixes: d7a74cad8f451 ("xfs: track usage statistics of online fsck")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0afba9a8363f17d4efed22a8764df33389aebe8 upstream.
A reviewer was confused by the init_sa logic in this function. Upon
checking the logic, I discovered that the code is imprecise. What we
want to do here is check that there is an ownership record in the rmap
btree for the AG that contains a btree block.
For an inode-rooted btree (e.g. the bmbt) the per-AG btree cursors have
not been initialized because inode btrees can span multiple AGs.
Therefore, we must initialize the per-AG btree cursors in sc->sa before
proceeding. That is what init_sa controls, and hence the logic should
be gated on XFS_BTREE_ROOT_IN_INODE, not XFS_BTREE_LONG_PTRS.
In practice, ROOT_IN_INODE and LONG_PTRS are coincident so this hasn't
mattered. However, we're about to refactor both of those flags into
separate btree_ops fields so we want this the logic to make sense
afterwards.
Fixes: 858333dcf021a ("xfs: check btree block ownership with bnobt/rmapbt when scrubbing btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0090d6e1b210551e63cf43958dc7a1ec942cdde9 upstream.
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50a1: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc84: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc69: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e0250: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87463f7e0250d471fac41e7c9c45ae21d83b5f85 upstream.
Split the code handling a type DUP block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e0e3e74dc6928a0956f4e27e24d473c65887e96 upstream.
Split the code handling a type single block group from
btrfs_load_block_group_zone_info to make the code more readable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09a46725cc84165af452d978a3532d6b97a28796 upstream.
Split out a helper for the body of the per-zone loop in
btrfs_load_block_group_zone_info to make the function easier to read and
modify.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15c12fcc50a1b12a747f8b6ec05cdb18c537a4d1 upstream.
Add a new zone_info structure to hold per-zone information in
btrfs_load_block_group_zone_info and prepare for breaking out helpers
from it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 670c900f69645db394efb38934b3344d8804171a upstream.
When the dts file has multiple referrers to a single PD (e.g.
simple-framebuffer and dss nodes both point to the DSS power-domain) the
ti-sci driver will create two power domains, both with the same ID, and
that will cause problems as one of the power domains will hide the other
one.
Fix this checking if a PD with the ID has already been created, and only
create a PD for new IDs.
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240415-ti-sci-pd-v1-1-a0e56b8ad897@ideasonboard.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f866b65322bfbc8fcca13c25f49e1a5c5a93ae4d upstream.
Add support for the Trace Hub in Lunar Lake.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-16-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4a30def564d75e84718b059d1a62cc79b137cf9 upstream.
Add support for the Trace Hub in Meteor Lake-S.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-14-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e1da7efabe05cb0cf0b358883b2bc89080ed0eb upstream.
Add support for the Trace Hub in Sapphire Rapids SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-13-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 854afe461b009801a171b3a49c5f75ea43e4c04c upstream.
Add support for the Trace Hub in Granite Rapids SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-12-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e44937889bdf4ecd1f0c25762b7226406b9b7a69 upstream.
Add support for the Trace Hub in Granite Rapids.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-11-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75800e2e4203ea83bbc9d4f63ad97ea582244a08 upstream.
After registering the audio component in i915_audio_component_init()
the audio driver may call i915_audio_component_get_power() via the
component ops. This could program AUD_FREQ_CNTRL with an uninitialized
value if the latter function is called before display.audio.freq_cntrl
gets initialized. The get_power() function also does a modeset which in
the above case happens too early before the initialization step and
triggers the
"Reject display access from task"
error message added by the Fixes: commit below.
Fix the above issue by registering the audio component only after the
initialization step.
Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521143022.3784539-1-imre.deak@intel.com
(cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 43e2b37e2ab660c3565d4cff27922bc70e79c3f1 upstream.
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
Cc: stable@vger.kernel.org
Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Add TODO comment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520165634.1162470-1-vidya.srinivas@intel.com
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39bc27bd688066a63e56f7f64ad34fae03fbe3b8 upstream.
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520100514.925681-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70cb9188ffc75e643debf292fcddff36c9dbd4ae upstream.
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a40e5e4dd0207485dee75e2b8e860d5853bcc5f7 upstream.
When copying timerlat auto-analysis from a terminal to some web pages or
chats, the \t are being replaced with a single ' ' or ' ', breaking
the output.
For example:
## CPU 3 hit stop tracing, analyzing it ##
IRQ handler delay: 1.30 us (0.11 %)
IRQ latency: 1.90 us
Timerlat IRQ duration: 3.00 us (0.24 %)
Blocking thread: 1223.16 us (99.00 %)
insync:4048 1223.16 us
IRQ interference 4.93 us (0.40 %)
local_timer:236 4.93 us
------------------------------------------------------------------------
Thread latency: 1235.47 us (100%)
Replace \t with spaces to avoid this problem.
Link: https://lkml.kernel.org/r/ec7ed2b2809c22ab0dfc8eb7c805ab9cddc4254a.1713968967.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f0769331a965675cdfec97c09f3f6e875d7c246 upstream.
Instead of printing three times the same output, print it only once,
reducing lines and being sure that all no values have the same length.
It also fixes an extra '\n' when running the with kernel threads, like
here:
=============== %< ==============
Timer Latency
0 00:00:01 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
2 #0 | - - - - | 161 161 161 161
3 #0 | - - - - | 161 161 161 161
8 #1 | 54 54 54 54 | - - - -'\n'
---------------|----------------------------------------|---------------------------------------
ALL #1 e0 | 54 54 54 | 161 161 161
=============== %< ==============
This '\n' should have been removed with the user-space support that
added another '\n' if not running with kernel threads.
Link: https://lkml.kernel.org/r/0a4d8085e7cd706733a5dc10a81ca38b82bd4992.1713968967.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Fixes: cdca4f4e5e8e ("rtla/timerlat_top: Add timerlat user-space support")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb1cf0878328fe75d47f0aed0a65b30126fcefc4 upstream.
__kernel_map_pages() is a debug function which clears the valid bit in page
table entry for deallocated pages to detect illegal memory accesses to
freed pages.
This function set/clear the valid bit using __set_memory(). __set_memory()
acquires init_mm's semaphore, and this operation may sleep. This is
problematic, because __kernel_map_pages() can be called in atomic context,
and thus is illegal to sleep. An example warning that this causes:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
preempt_count: 2, expected: 0
CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800060dc>] dump_backtrace+0x1c/0x24
[<ffffffff8091ef6e>] show_stack+0x2c/0x38
[<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72
[<ffffffff8092bb24>] dump_stack+0x14/0x1c
[<ffffffff8003b7ac>] __might_resched+0x104/0x10e
[<ffffffff8003b7f4>] __might_sleep+0x3e/0x62
[<ffffffff8093276a>] down_write+0x20/0x72
[<ffffffff8000cf00>] __set_memory+0x82/0x2fa
[<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4
[<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a
[<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba
[<ffffffff80011904>] copy_process+0x72c/0x17ec
[<ffffffff80012ab4>] kernel_clone+0x60/0x2fe
[<ffffffff80012f62>] kernel_thread+0x82/0xa0
[<ffffffff8003552c>] kthreadd+0x14a/0x1be
[<ffffffff809357de>] ret_from_fork+0xe/0x1c
Rewrite this function with apply_to_existing_page_range(). It is fine to
not have any locking, because __kernel_map_pages() works with pages being
allocated/deallocated and those pages are not changed by anyone else in the
meantime.
Fixes: 5fde3db5eb02 ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/1289ecba9606a19917bc12b6c27da8aa23e1e5ae.1715750938.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80721776c5af6f6dce7d84ba8df063957aa425a2 upstream.
We can only access the IP core registers if the bus clock is enabled. As
such we need to get and enable it and not rely on anyone else to do it.
Note this clock is a very fundamental one that is typically enabled
pretty early during boot. Independently of that, we should really rely on
it to be enabled.
Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240426-ad9467-new-features-v2-4-6361fc3ba1cc@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c8a9066d584f5010b6f4ba03bf6b19d28973d52 upstream.
PSC controller has a limitation that it can only power-up the second
core when the first core is in ON state. Power-state for core0 should be
equal to or higher than core1.
Therefore, prevent core1 from powering up before core0 during the start
process from sysfs. Similarly, prevent core0 from shutting down before
core1 has been shut down from sysfs.
Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61f6f68447aba08aeaa97593af3a7d85a114891f upstream.
PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d5443 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bc31444209c8efae98cb78818131950d9a6f4d6 upstream.
We need to first free the IRQ before calling of_dma_controller_free().
Otherwise we could get an interrupt and schedule a tasklet while
removing the DMA controller.
Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Cc: stable@kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240328-axi-dmac-devm-probe-v3-1-523c0176df70@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dba285caba53f309d6060fca911b43d63f41697 upstream.
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 952b023f06a24b2ad6ba67304c4c84d45bea2f18 upstream.
After commit "ocfs2: return real error code in ocfs2_dio_wr_get_block",
fstests/generic/300 become from always failed to sometimes failed:
========================================================================
[ 473.293420 ] run fstests generic/300
[ 475.296983 ] JBD2: Ignoring recovery information on journal
[ 475.302473 ] ocfs2: Mounting device (253,1) on (node local, slot 0) with ordered data mode.
[ 494.290998 ] OCFS2: ERROR (device dm-1): ocfs2_change_extent_flag: Owner 5668 has an extent at cpos 78723 which can no longer be found
[ 494.291609 ] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[ 494.292018 ] OCFS2: File system is now read-only.
[ 494.292224 ] (kworker/19:11,2628,19):ocfs2_mark_extent_written:5272 ERROR: status = -30
[ 494.292602 ] (kworker/19:11,2628,19):ocfs2_dio_end_io_write:2374 ERROR: status = -3
fio: io_u error on file /mnt/scratch/racer: Read-only file system: write offset=460849152, buflen=131072
=========================================================================
In __blockdev_direct_IO, ocfs2_dio_wr_get_block is called to add unwritten
extents to a list. extents are also inserted into extent tree in
ocfs2_write_begin_nolock. Then another thread call fallocate to puch a
hole at one of the unwritten extent. The extent at cpos was removed by
ocfs2_remove_extent(). At end io worker thread, ocfs2_search_extent_list
found there is no such extent at the cpos.
T1 T2 T3
inode lock
...
insert extents
...
inode unlock
ocfs2_fallocate
__ocfs2_change_file_space
inode lock
lock ip_alloc_sem
ocfs2_remove_inode_range inode
ocfs2_remove_btree_range
ocfs2_remove_extent
^---remove the extent at cpos 78723
...
unlock ip_alloc_sem
inode unlock
ocfs2_dio_end_io
ocfs2_dio_end_io_write
lock ip_alloc_sem
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_search_extent_list
^---failed to find extent
...
unlock ip_alloc_sem
In most filesystems, fallocate is not compatible with racing with AIO+DIO,
so fix it by adding to wait for all dio before fallocate/punch_hole like
ext4.
Link: https://lkml.kernel.org/r/20240408082041.20925-3-glass.su@suse.com
Fixes: b25801038da5 ("ocfs2: Support xfs style space reservation ioctls")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8cb324277ee16f3eca3055b96fce4735a5a41c6 upstream.
The default atime related mount option is '-o realtime' which means file
atime should be updated if atime <= ctime or atime <= mtime. atime should
be updated in the following scenario, but it is not:
==========================================================
$ rm /mnt/testfile;
$ echo test > /mnt/testfile
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
$ sleep 5
$ cat /mnt/testfile > /dev/null
$ stat -c "%X %Y %Z" /mnt/testfile
1711881646 1711881646 1711881646
==========================================================
And the reason the atime in the test is not updated is that ocfs2 calls
ktime_get_real_ts64() in __ocfs2_mknod_locked during file creation. Then
inode_set_ctime_current() is called in inode_set_ctime_current() calls
ktime_get_coarse_real_ts64() to get current time.
ktime_get_real_ts64() is more accurate than ktime_get_coarse_real_ts64().
In my test box, I saw ctime set by ktime_get_coarse_real_ts64() is less
than ktime_get_real_ts64() even ctime is set later. The ctime of the new
inode is smaller than atime.
The call trace is like:
ocfs2_create
ocfs2_mknod
__ocfs2_mknod_locked
....
ktime_get_real_ts64 <------- set atime,ctime,mtime, more accurate
ocfs2_populate_inode
...
ocfs2_init_acl
ocfs2_acl_set_mode
inode_set_ctime_current
current_time
ktime_get_coarse_real_ts64 <-------less accurate
ocfs2_file_read_iter
ocfs2_inode_lock_atime
ocfs2_should_update_atime
atime <= ctime ? <-------- false, ctime < atime due to accuracy
So here call ktime_get_coarse_real_ts64 to set inode time coarser while
creating new files. It may lower the accuracy of file times. But it's
not a big deal since we already use coarse time in other places like
ocfs2_update_inode_atime and inode_set_ctime_current.
Link: https://lkml.kernel.org/r/20240408082041.20925-5-glass.su@suse.com
Fixes: c62c38f6b91b ("ocfs2: replace CURRENT_TIME macro")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cbcb62dddf5346077feb82b7b0c9254222d3445 upstream.
While taking a kernel core dump with makedumpfile on a larger system,
softlockup messages often appear.
While softlockup warnings can be harmless, they can also interfere with
things like RCU freeing memory, which can be problematic when the kdump
kexec image is configured with as little memory as possible.
Avoid the softlockup, and give things like work items and RCU a chance to
do their thing during __read_vmcore by adding a cond_resched.
Link: https://lkml.kernel.org/r/20240507091858.36ff767f@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e221c45da3770962418fb30c27d941bbc70d595a upstream.
The 'NFS error' NFSERR_OPNOTSUPP is not described by any of the official
NFS related RFCs, but appears to have snuck into some older .x files for
NFSv2.
Either way, it is not in RFC1094, RFC1813 or any of the NFSv4 RFCs, so
should not be returned by the knfsd server, and particularly not by the
"LOOKUP" operation.
Instead, let's return NFSERR_STALE, which is more appropriate if the
filesystem encodes the filehandle as FILEID_INVALID.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eda4923d78d634482227c0b189d9b7ca18824146 upstream.
'nr' member of struct spmi_controller, which serves as an identifier
for the controller/bus. This value is a dynamic ID assigned in
spmi_controller_alloc, and overriding it from the driver results in an
ida_free error "ida_free called for id=xx which is not allocated".
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Fixes: 70f59c90c819 ("staging: spmi: add Hikey 970 SPMI controller driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240228185116.1269-1-vamshigajjela@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240507210809.3479953-5-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8003f00d895310d409b2bf9ef907c56b42a4e0f4 upstream.
Coverity spotted that event_msg is controlled by user-space,
event_msg->event_data.event is passed to event_deliver() and used
as an index without sanitization.
This change ensures that the event index is sanitized to mitigate any
possibility of speculative information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Only compile tested, no access to HW.
Fixes: 1d990201f9bb ("VMCI: event handling implementation.")
Cc: stable <stable@kernel.org>
Signed-off-by: Hagar Gamal Halim Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/stable/20231127193533.46174-1-hagarhem%40amazon.com
Link: https://lore.kernel.org/r/20240430085916.4753-1-hagarhem@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cb05d89fd62a76a9b74bd16211fb0930e89fea8 upstream.
kthread creation may possibly fail inside race_signal_callback(). In
such a case stop the already started threads, put the already taken
references to them and return with error code.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 2989f6451084 ("dma-buf: Add selftests for dma-fence")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522181308.841686-1-pchelkin@ispras.ru
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b4647add7d3c8530493f7247d11e257ee425bf0 upstream.
sk_psock_get will return NULL if the refcount of psock has gone to 0, which
will happen when the last call of sk_psock_put is done. However,
sk_psock_drop may not have finished yet, so the close callback will still
point to sock_map_close despite psock being NULL.
This can be reproduced with a thread deleting an element from the sock map,
while the second one creates a socket, adds it to the map and closes it.
That will trigger the WARN_ON_ONCE:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 7220 at net/core/sock_map.c:1701 sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Modules linked in:
CPU: 1 PID: 7220 Comm: syz-executor380 Not tainted 6.9.0-syzkaller-07726-g3c999d1ae3c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
RIP: 0010:sock_map_close+0x2a2/0x2d0 net/core/sock_map.c:1701
Code: df e8 92 29 88 f8 48 8b 1b 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 79 29 88 f8 4c 8b 23 eb 89 e8 4f 15 23 f8 90 <0f> 0b 90 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d e9 13 26 3d 02
RSP: 0018:ffffc9000441fda8 EFLAGS: 00010293
RAX: ffffffff89731ae1 RBX: ffffffff94b87540 RCX: ffff888029470000
RDX: 0000000000000000 RSI: ffffffff8bcab5c0 RDI: ffffffff8c1faba0
RBP: 0000000000000000 R08: ffffffff92f9b61f R09: 1ffffffff25f36c3
R10: dffffc0000000000 R11: fffffbfff25f36c4 R12: ffffffff89731840
R13: ffff88804b587000 R14: ffff88804b587000 R15: ffffffff89731870
FS: 000055555e080380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000207d4000 CR4: 0000000000350ef0
Call Trace:
<TASK>
unix_release+0x87/0xc0 net/unix/af_unix.c:1048
__sock_release net/socket.c:659 [inline]
sock_close+0xbe/0x240 net/socket.c:1421
__fput+0x42b/0x8a0 fs/file_table.c:422
__do_sys_close fs/open.c:1556 [inline]
__se_sys_close fs/open.c:1541 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1541
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb37d618070
Code: 00 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff eb d4 e8 10 2c 00 00 80 3d 31 f0 07 00 00 74 17 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c
RSP: 002b:00007ffcd4a525d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fb37d618070
RDX: 0000000000000010 RSI: 00000000200001c0 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000100000000 R09: 0000000100000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Use sk_psock, which will only check that the pointer is not been set to
NULL yet, which should only happen after the callbacks are restored. If,
then, a reference can still be gotten, we may call sk_psock_stop and cancel
psock->work.
As suggested by Paolo Abeni, reorder the condition so the control flow is
less convoluted.
After that change, the reproducer does not trigger the WARN_ON_ONCE
anymore.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: syzbot+07a2e4a1a57118ef7355@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=07a2e4a1a57118ef7355
Fixes: aadb2bb83ff7 ("sock_map: Fix a potential use-after-free in sock_map_close()")
Fixes: 5b4a79ba65a1 ("bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240524144702.1178377-1-cascardo@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 233e27b4d21c3e44eb863f03e566d3a22e81a7ae upstream.
When changing the maximum number of open zones, print that number
instead of the total number of zones.
Fixes: dc4d137ee3b7 ("null_blk: add support for max open/active zone limit for zoned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240528062852.437599-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bd27a847a3a4827a948387cc8f0dbc9fa5931d5 upstream.
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23a4b108accc29a6125ed14de4a044689ffeda78 upstream.
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e3548236d ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 994af1825a2aa286f4903ff64a1c7378b52defe6 upstream.
On riscv32, it is possible for the last page in virtual address space
(0xfffff000) to be allocated. This page overlaps with PTR_ERR, so that
shouldn't happen.
There is already some code to ensure memblock won't allocate the last page.
However, buddy allocator is left unchecked.
Fix this by reserving physical memory that would be mapped at virtual
addresses greater than 0xfffff000.
Reported-by: Björn Töpel <bjorn@kernel.org>
Closes: https://lore.kernel.org/linux-riscv/878r1ibpdn.fsf@all.your.base.are.belong.to.us
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240425115201.3044202-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb69c912c4e8005cf1ee6c63782d2fc28838dee2 upstream.
If the --itrace option is used more than once, the options are
combined, but "i" and "y" (sub-)options can be corrupted because
itrace_do_parse_synth_opts() incorrectly overwrites the period type and
period with default values.
For example, with:
--itrace=i0ns --itrace=e
The processing of "--itrace=e", resets the "i" period from 0 nanoseconds
to the default 100 microseconds.
Fix by performing the default setting of period type and period only if
"i" or "y" are present in the currently processed --itrace value.
Fixes: f6986c95af84ff2a ("perf session: Add instruction tracing options")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315071334.3478-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74751ef5c1912ebd3e65c3b65f45587e05ce5d36 upstream.
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a661 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c625dabbf1c4a8e77e4734014f2fde7aa9071a1f upstream.
AMD Zen-based systems use a System Management Network (SMN) that
provides access to implementation-specific registers.
SMN accesses are done indirectly through an index/data pair in PCI
config space. The PCI config access may fail and return an error code.
This would prevent the "read" value from being updated.
However, the PCI config access may succeed, but the return value may be
invalid. This is in similar fashion to PCI bad reads, i.e. return all
bits set.
Most systems will return 0 for SMN addresses that are not accessible.
This is in line with AMD convention that unavailable registers are
Read-as-Zero/Writes-Ignored.
However, some systems will return a "PCI Error Response" instead. This
value, along with an error code of 0 from the PCI config access, will
confuse callers of the amd_smn_read() function.
Check for this condition, clear the return value, and set a proper error
code.
Fixes: ddfe43cdc0da ("x86/amd_nb: Add SMN and Indirect Data Fabric access for AMD Fam17h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403164244.471141-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93c1800b3799f17375989b0daf76497dd3e80922 upstream.
The call to cc_platform_has() triggers a fault and system crash if call depth
tracking is active because the GS segment has been reset by load_segments() and
GS_BASE is now 0 but call depth tracking uses per-CPU variables to operate.
Call cc_platform_has() earlier in the function when GS is still valid.
[ bp: Massage. ]
Fixes: 5d8213864ade ("x86/retbleed: Add SKL return thunk")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240603083036.637-1-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
