IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc ipt action was intended to run all netfilter/iptables target.
Unfortunately it has not benefitted over the years from proper updates when
netfilter changes, and for that reason it has remained rudimentary.
Pinging a bunch of people that i was aware were using this indicates that
removing it wont affect them.
Retire it to reduce maintenance efforts. Buh-bye.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->gso_partial_features is read from tx fast path for GSO packets.
Move it to appropriate section to avoid a cache line miss.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to have an intermediate functions as DEFINE_RES_*()
macros are represented by compound literals. Just use them in place.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier says:
====================
Introduce PHY listing and link_topology tracking
Here's a V5 of the multi-PHY support series.
At a glance, besides some minor fixes and R'd-by from Andrew, one of the
thing this series does is remove the ASSERT_RTNL() from the
topo_add_phy/del_phy operations.
These operations will take a PHY device and put it into the list of
devices associated to a netdevice. The main thing to protect here is the
list itself, but since we use xarrays, my naive understanding of it is
that it contains its own protection scheme. There shouldn't be a need
for more locking, as the insertion/deletion paths are already hooked
into the PHY connection to a netdev, or disconnection from it.
Now for the rest of the cover :
As a remainder, this ongoing work aims ultimately at supporting complex
link topologies that involve multiplexing multiple PHYs/SFPs on a single
netdevice. As a first step, it's required that we are able to enumerate the
PHYs on a given ethernet interface.
By just doing so, we also improve already-existing use-cases, namely the
copper SFP modules support when a media-converter is used (as we have 2
PHYs on the link, but only one is referenced by net_device.phydev, which
is used on a variety of netlink commands).
The series is architectured as follows :
- The first patch adds the notion of phy_link_topology, which tracks
all PHYs attached to a netdevice.
- Patches 2, 3 and 4 adds some plumbing into SFP and phylib to be able
to connect the dots when building the topology tree, to know which PHY
is connected to which SFP bus, trying not to be too invasive on phylib.
- Patch 5 allows passing a PHY_INDEX to ethnl commands. I'm uncertain about
this, as there are at least 4 netlink commands ( 5 with the one introduced
in patch 7 ) that targets PHYs directly or indirectly, which to me makes
it worth-it to have a generic way to pass a PHY index to commands, however
the approach taken may be too generic.
- Patch 6 is the netlink spec update + ethtool-user.c|h autogenerated code
update (the autogenerated code triggers checkpatch warning though)
- Patch 7 introduces a new netlink command set to list PHYs on a netdevice.
It implements a custom DUMP and GET operation to allow filtered dumps,
that lists all PHYs on a given netdevice. I couldn't use most of ethnl's
plumbing though.
- Patch 8 is the netlink spec update + ethtool-user.c|h update for that
new command
- Patch 8,9,10 and 11 updates the PLCA, strset, cable-test and pse netlink
commands to use the user-provided PHY instead of net_device.phydev.
- Finally patch 12 adds some documentation for this whole work.
Examples
========
Here's a short overview of the kind of operations you can have regarding
the PHY topology. These tests were performed on a MacchiatoBin, which
has 3 interfaces :
eth0 and eth1 have the following layout:
MAC - PHY - SFP
eth2 has this more classic topology :
MAC - PHY - RJ45
finally eth3 has the following topology :
MAC - SFP
When performing a dump with all interfaces down, we don't get any
result, as no PHY has been attached to their respective net_device :
None
The following output is with eth0, eth2 and eth3 up, but no SFP module
inserted in none of the interfaces :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1510',
'header': {'dev-index': 4, 'dev-name': 'eth2'},
'id': 21040593,
'index': 1,
'name': 'f212a200.mdio-mii:00',
'upstream-type': 'mac'}]
And now is a dump operation with a copper SFP in the eth0 port :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'},
{'drvname': 'Marvell 88E1510',
'header': {'dev-index': 4, 'dev-name': 'eth2'},
'id': 21040593,
'index': 1,
'name': 'f212a200.mdio-mii:00',
'upstream-type': 'mac'}]
-- Note that this shouldn't actually work as the 88x3310 PHY doesn't allow
a 1G SFP to be connected to its SFP interface, and I don't have a 10G copper SFP,
so for the sake of the demo I applied the following modification, which
of courses gives a non-functionnal link, but the PHY attach still works,
which is what I want to demonstrate :
@@ -488,7 +488,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
if (iface != PHY_INTERFACE_MODE_10GBASER) {
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
- return -EINVAL;
+ //return -EINVAL;
}
return 0;
}
Finally an example of the filtered DUMP operation that Jakub suggested
in V1 :
[{'downstream-sfp-name': 'sfp-eth0',
'drvname': 'mv88x3310',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 0,
'index': 1,
'name': 'f212a600.mdio-mii:00',
'upstream-type': 'mac'},
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'}]
And a classic GET operation allows querying a single PHY's info :
{'drvname': 'Marvell 88E1111',
'header': {'dev-index': 2, 'dev-name': 'eth0'},
'id': 21040322,
'index': 2,
'name': 'i2c:sfp-eth0:16',
'upstream': {'index': 1, 'sfp-name': 'sfp-eth0'},
'upstream-type': 'phy'}
Changed in V5:
- Removed the RTNL assertion in the topology ops
- Made the phy_topo_get_phy inline
- Fixed the PSE-PD multi-PHY support by re-adding a wrongly dropped
check
- Fixed some typos in the documentation
- Fixed reverse xmas trees
Changes in V4:
- Dropped the RFC flag
- Made the net_device integration independent to having phylib enabled
- Removed the autogenerated ethtool-user code for the YNL specs
Changes in V3:
- Added RTNL assertions where needed
- Fixed issues in the DUMP code for PHY_GET, which crashed when running it
twice in a row
- Added the documentation, and moved in-source docs around
- renamed link_topology to phy_link_topology
Changes in V2:
- Added the DUMP operation
- Added much more information in the reported data, to be able to reconstruct
precisely the topology tree
- renamed phy_list to link_topology
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the spec to take the newly introduced phy-index as a generic
request parameter.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=+Uvv
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
netfilter pull request 23-12-22
The following patchset contains Netfilter updates for net-next:
1) Add locking for NFT_MSG_GETSETELEM_RESET requests, to address a
race scenario with two concurrent processes running a dump-and-reset
which exposes negative counters to userspace, from Phil Sutter.
2) Use GFP_KERNEL in pipapo GC, from Florian Westphal.
3) Reorder nf_flowtable struct members, place the read-mostly parts
accessed by the datapath first. From Florian Westphal.
4) Set on dead flag for NFT_MSG_NEWSET in abort path,
from Florian Westphal.
5) Support filtering zone in ctnetlink, from Felix Huettner.
6) Bail out if user tries to redefine an existing chain with different
type in nf_tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZYVEqQAKCRDbK58LschI
gzH6AP9hVXLpHFTWMT0+2GK2lx69VX8zW1C0SmN7WHaxUbPN9QEAwzGnELfKk00P
0IKRHSl5abhVMX7JOM3sSOhCILeKjQg=
=wRLJ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next-for-netdev
The following pull-request contains BPF updates for your *net-next* tree.
We've added 22 non-merge commits during the last 3 day(s) which contain
a total of 23 files changed, 652 insertions(+), 431 deletions(-).
The main changes are:
1) Add verifier support for annotating user's global BPF subprogram arguments
with few commonly requested annotations for a better developer experience,
from Andrii Nakryiko.
These tags are:
- Ability to annotate a special PTR_TO_CTX argument
- Ability to annotate a generic PTR_TO_MEM as non-NULL
2) Support BPF verifier tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like, from
Menglong Dong.
3) Fix a warning in bpf_mem_cache's check_obj_size() as reported by LKP, from Hou Tao.
4) Re-support uid/gid options when mounting bpffs which had to be reverted with
the prior token series revert to avoid conflicts, from Daniel Borkmann.
5) Fix a libbpf NULL pointer dereference in bpf_object__collect_prog_relos() found
from fuzzing the library with malformed ELF files, from Mingyi Zhang.
6) Skip DWARF sections in libbpf's linker sanity check given compiler options to
generate compressed debug sections can trigger a rejection due to misalignment,
from Alyssa Ross.
7) Fix an unnecessary use of the comma operator in BPF verifier, from Simon Horman.
8) Fix format specifier for unsigned long values in cpustat sample, from Colin Ian King.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmWDjMMACgkQSD+KveBX
+j5VFgf/b59UxW5f0aL08CI1XAY5cKHmsYADj2oNhujXGh/TsZAEwedIT5CUvzhH
/hgmGLDPRTbEHjSWOXAV4m35VAO38wpTFVVbUfvPBri8bWc7OyuofDDVkt0LuU6n
aa0lsF+BDnD5il3C1MjzsnTTThVJ9IoNEuE74MOQoYCNGpU0XANcb8aO0hEx+Xr0
bJu9E/4e3qDHOQk+vAPY+ssoDv67gT6ED7OFfyP/v8r0eqwXBedbWEDq5Za10xdQ
62z/9dkC8vxN7Q8KjbC6s9CA0eYf69muD4Ggeo2S6lPfO6UclAwQhYYMBjzpDEf3
kQXdTJL0VWgPmWq0Sw8S2lyMmD7qKQ==
=16bl
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-12-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-20
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in commit e03781879a0d ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the driver core can properly handle constant struct bus_type,
move the iucv_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-s390@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kerneldoc comment for struct ethtool_fec_stats attempts to describe the
"total" and "lanes" fields of the ethtool_fec_stat substructure in a way
leading to these warnings:
./include/linux/ethtool.h:424: warning: Excess struct member 'lane' description in 'ethtool_fec_stats'
./include/linux/ethtool.h:424: warning: Excess struct member 'total' description in 'ethtool_fec_stats'
Reformat the comment to retain the information while eliminating the
warnings.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel doc comments for struct ethtool_link_settings includes
documentation for three fields that were never present there, leading to
these docs-build warnings:
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'supported' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'advertising' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'lp_advertising' description in 'ethtool_link_settings'
Remove the entries to make the warnings go away. There was some
information there on how data in >link_mode_masks is formatted; move that
to the body of the comment to preserve it.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove a couple of kerneldoc entries for struct members that do not exist,
addressing these warnings:
./include/net/sock.h:548: warning: Excess struct member '__sk_flags_offset' description in 'sock'
./include/net/sock.h:548: warning: Excess struct member 'sk_padding' description in 'sock'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A freezable kernel thread can enter frozen state during freezing by
either calling try_to_freeze() or using wait_event_freezable() and its
variants. So for the following snippet of code in a kernel thread loop:
wait_event_interruptible_timeout();
try_to_freeze();
We can change it to a simple wait_event_freezable_timeout() and then
eliminate a function call.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Radu Pirea says:
====================
Add MACsec support for TJA11XX C45 PHYs
This is the MACsec support for TJA11XX PHYs. The MACsec block encrypts
the ethernet frames on the fly and has no buffering. This operation will
grow the frames by 32 bytes. If the frames are sent back to back, the
MACsec block will not have enough room to insert the SecTAG and the ICV
and the frames will be dropped.
To mitigate this, the PHY can parse a specific ethertype with some
padding bytes and replace them with the SecTAG and ICV. These padding
bytes might be dummy or might contain information about TX SC that must
be used to encrypt the frame.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement mdo_insert_tx_tag to insert the TLV header in the ethernet
frame.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MACsec statistics callbacks.
The statistic registers must be set to 0 if the SC/SA is
deleted to read relevant values next time when the SC/SA is used.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MACsec support.
The MACsec block has four TX SCs and four RX SCs. The driver supports up
to four SecY. Each SecY with one TX SC and one RX SC.
The RX SCs can have two keys, key A and key B, written in hardware and
enabled at the same time.
The TX SCs can have two keys written in hardware, but only one can be
active at a given time.
On TX, the SC is selected using the MAC source address. Due of this
selection mechanism, each offloaded netdev must have a unique MAC
address.
On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC
SA), or using RX SC 0 as implicit.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in
the ethernet frame. This operation will increase the frame size with up
to 32 bytes. If the frames are sent at line rate, the PHY will not have
enough room to insert the SecTAG and the ICV.
Some PHYs use a hardware buffer to store a number of ethernet frames and,
if it fills up, a pause frame is sent to the MAC to control the flow.
This HW implementation does not need any modification in the stack.
Other PHYs might offer to use a specific ethertype with some padding
bytes present in the ethernet frame. This ethertype and its associated
bytes will be replaced by the SecTAG and ICV.
mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the
skb.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device
might be left in an inconsistent state.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for fields of struct macsec_context and struct
macsec_ops.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move sci_to_cpu to the MACsec header to use it in drivers.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use skb_ensure_writable_head_tail to expand the skb if needed instead of
reimplementing a similar operation.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to
skbuff.c to use it as helper.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears that there is a typo in the code where the nlattr array is
being parsed with policy br_cfm_cc_ccm_tx_policy, but the instance is
being accessed via IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, which is associated
with the policy br_cfm_cc_rdi_policy.
This problem was introduced by commit 2be665c3940d ("bridge: cfm: Netlink
SET configuration Interface.").
Though it seems like a harmless typo since these two enum owns the exact
same value (1 here), it is quite misleading hence fix it by using the
correct enum IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE here.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: cleanup and support more ephemeral ports sockopts
Patch 1 is a cleanup one: mptcp_is_tcpsk() helper was modifying sock_ops
in some cases which is unexpected with that name.
Patch 2 to 4 add support for two socket options: IP_LOCAL_PORT_RANGE and
IP_BIND_ADDRESS_NO_PORT. The first one is a preparation patch, the
second one adds the support while the last one modifies an existing
selftest to validate the new features.
====================
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and
IP_LOCAL_PORT_RANGE sockopts.
Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range
selftest to provide selftest coverage for these sockopts.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for IP_BIND_ADDRESS_NO_PORT sockopt was introduced in [1].
Recently [2] allowed its value to be accessed without locking the
socket.
Support for (newer) IP_LOCAL_PORT_RANGE sockopt was introduced in [3].
In the same series a selftest was added in [4]. This selftest also
covers the IP_BIND_ADDRESS_NO_PORT sockopt.
This patch enables getsockopt()/setsockopt() on MPTCP sockets for these
socket options, syncing set values to subflows in sync_socket_options().
Ephemeral port range is synced to subflows, enabling NAT usecase
described in [3].
[1] commit 90c337da1524 ("inet: add IP_BIND_ADDRESS_NO_PORT to overcome
bind(0) limitations")
[2] commit ca571e2eb7eb ("inet: move inet->bind_address_no_port to
inet->inet_flags")
[3] commit 91d0b78c5177 ("inet: Add IP_LOCAL_PORT_RANGE socket option")
[4] commit ae5439658cce ("selftests/net: Cover the IP_LOCAL_PORT_RANGE
socket option")
Signed-off-by: Maxim Galaganov <max@internet.ru>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Next patch extends this function so that it's not specific to
IP_TRANSPARENT. Change function name to mptcp_setsockopt_sol_ip_set().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet suggests:
> The fact that mptcp_is_tcpsk() was able to write over sock->ops was a
> bit strange to me.
> mptcp_is_tcpsk() should answer a question, with a read-only argument.
re-factor code to avoid overwriting sock_ops inside that function. Also,
change the helper name to reflect the semantics and to disambiguate from
its dual, sk_is_mptcp(). While at it, collapse mptcp_stream_accept() and
mptcp_accept() into a single function, where fallback / non-fallback are
separated into a single sk_is_mptcp() conditional.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/432
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Better align function variables to open parenthesis as suggested by
checkpatch script for qca808x function to make code cleaner.
For cable_test_get_status function some additional rework was needed to
handle too long functions.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Victor Nogueira says:
====================
net/sched: Introduce tc block ports tracking and use
__context__
The "tc block" is a collection of netdevs/ports which allow qdiscs to share
match-action block instances (as opposed to the traditional tc filter per
netdev/port)[1].
Up to this point in the implementation, the block is unaware of its ports.
This patch makes the tc block ports available to the datapath.
For the datapath we provide a use case of the tc block in a mirred
action in patch 3. For users can levarage mirred to do something like
the following:
$ tc qdisc add dev ens7 ingress_block 22 clsact
$ tc qdisc add dev ens8 ingress_block 22 clsact
$ tc qdisc add dev ens9 ingress_block 22 clsact
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
In this case, if the packet arrives on ens8, it will be copied and sent to
all ports in the block excluding ens8. Note that the packet is still in
the pipeline at this point - meaning other actions could be added after the
mirror because mirred copies/clones the skb. Example the following is
valid:
$ tc filter add block 22 protocol ip pref 25 flower dst_ip 192.168.0.0/16 \
action mirred egress mirror blockid 22 \
action vlan push id 123 \
action mirred egress redirect dev dummy0
redirect behavior always steals the packet from the pipeline and therefore
the skb is no longer available for a subsequent action as illustrated above
(in redirecting to dummy0).
The behavior of redirecting to a tc block is therefore adapted to work in
the same manner. So a setup as such:
$ tc qdisc add dev ens7 ingress_block 22
$ tc qdisc add dev ens8 ingress_block 22
$ tc qdisc add dev ens9 ingress_block 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress redirect blockid 22
for a matching packet arriving on ens7 will first send a copy/clone to ens8
(as in the "mirror" behavior) then to ens9 as in the redirect behavior
above. Once this processing is done - no other actions are able to process
this skb. i.e it is removed from the "pipeline".
In this case, if the packet arrives on ens8, it will be copied and sent to
all ports in the block excluding ens8.
Patch 1 separates/exports mirror and redirect functions from act_mirred
Patch 2 introduces the required infra.
Patch 3 Allows mirred to blocks
Subsequent patches will come with tdc test cases.
__Acknowledgements__
Suggestions from Vlad Buslov and Marcelo Ricardo Leitner made this patchset
better. The idea of integrating the ports into the tc block was suggested
by Jiri Pirko.
[1] See commit ca46abd6f89f ("Merge branch'net-sched-allow-qdiscs-to-share-filter-block-instances'")
Changes in v2:
- Remove RFC tag
- Add more details in patch 0(Jiri)
- When CONFIG_NET_TC_SKB_EXT is selected we have unused qdisc_cb
Reported-by: kernel test robot <lkp@intel.com> (and
horms@kernel.org)
- Fix bad dev dereference in printk of blockcast action (Simon)
Changes in v3:
- Add missing xa_destroy (pointed out by Vlad)
- Remove bugfix pointed by Vlad (will send in separate patch)
- Removed ports from subject in patch #2 and typos (suggested by
Marcelo)
- Remove net_notice_ratelimited debug messages in error
cases (suggested by Marcelo)
- Minor changes to appease sparse's lock context warning
Changes in v4:
- Avoid code repetition using gotos in cast_one (suggested by Paolo)
- Fix typo in cover letter (pointed out by Paolo)
- Create a module description for act_blockcast
(reported by Paolo and CI)
Changes in v5:
- Add new patch which separated mirred into mirror and redirect
functions (suggested by Jiri)
- Instead of repeating the code to mirror in blockcast use mirror
exported function by patch1 (tcf_mirror_act)
- Make Block ID into act_blockcast's parameter passed by user space
instead of always getting it from SKB (suggested by Jiri)
- Add tx_type parameter which will specify what transmission behaviour
we want (as described earlier)
Changes in v6:
- Remove blockcast and make it a part of mirred (suggestd by Jiri)
- Block ID is now a mirred parameter
- We now allow redirecting and mirroring to either ingress or egress
Changes in v7:
- Remove set but not used variable in tcf_mirred_act (pointed out by
Jakub)
Changes in v8:
- Fix uapi issues (pointed out by Jiri)
- Separate last patch into 3 - two as preparations for adding
block ID to mirred and one allowing mirred to block (suggested by Jiri)
- Remove declaration initialisation of eg_block and in_block in
qdisc_block_add_dev (suggested by Jiri)
- Avoid unnecessary if guards in qdisc_block_add_dev (suggested by Jiri)
- Remove unncessary block_index retrieval in __qdisc_destroy
(suggested by Jiri)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
So far the mirred action has dealt with syntax that handles
mirror/redirection for netdev. A matching packet is redirected or mirrored
to a target netdev.
In this patch we enable mirred to mirror to a tc block as well.
IOW, the new syntax looks as follows:
... mirred <ingress | egress> <mirror | redirect> [index INDEX] < <blockid BLOCKID> | <dev <devname>> >
Examples of mirroring or redirecting to a tc block:
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 192.168.0.0/16 action mirred egress mirror blockid 22
$ tc filter add block 22 protocol ip pref 25 \
flower dst_ip 10.10.10.10/32 action mirred egress redirect blockid 22
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The act of replacing a device will be repeated by the init logic for the
block ID in the patch that allows mirred to a block. Therefore we
encapsulate this functionality in a function (tcf_mirred_replace_dev) so
that we can reuse it and avoid code repetition.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation for adding block ID to mirred, separate the part of
mirred that redirect/mirrors to a dev into a specific function so that it
can be called by blockcast for each dev.
Also improve readability. Eg. rename use_reinsert to dont_clone and skb2
to skb_to_send.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The datapath can now find the block of the port in which the packet arrived
at.
In the next patch we show a possible usage of this patch in a new
version of mirred that multicasts to all ports except for the port in
which the packet arrived on.
Co-developed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
