IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit f2d3155e2a6bac44d16f04415a321e8707d895c6 upstream.
Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.
When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.
Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.
Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().
Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.
To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().
Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.
Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45dd9bc75d9adc9483f0c7d662ba6e73ed698a0b upstream.
modpost reports section mismatch errors/warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
WARNING: modpost: vmlinux.o: section mismatch in reference: svm_hv_hardware_setup (section: .text) -> (unknown) (section: .init.data)
This "(unknown) (section: .init.data)" all refer to svm_x86_ops.
Tag svm_hv_hardware_setup() with __init to fix a modpost warning as the
non-stub implementation accesses __initdata (svm_x86_ops), i.e. would
generate a use-after-free if svm_hv_hardware_setup() were actually invoked
post-init. The helper is only called from svm_hardware_setup(), which is
also __init, i.e. lack of __init is benign other than the modpost warning.
Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230222073315.9081-1-rdunlap@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f94f053aa3a5d6ff17951870483d9eb9e13de2e2 upstream.
KVM_SEV_SEND_UPDATE_DATA and KVM_SEV_RECEIVE_UPDATE_DATA have an integer
overflow issue. Params.guest_len and offset are both 32 bits wide, with a
large params.guest_len the check to confirm a page boundary is not
crossed can falsely pass:
/* Check if we are crossing the page boundary *
offset = params.guest_uaddr & (PAGE_SIZE - 1);
if ((params.guest_len + offset > PAGE_SIZE))
Add an additional check to confirm that params.guest_len itself is not
greater than PAGE_SIZE.
Note, this isn't a security concern as overflow can happen if and only if
params.guest_len is greater than 0xfffff000, and the FW spec says these
commands fail with lengths greater than 16KB, i.e. the PSP will detect
KVM's goof.
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command")
Fixes: d3d1af85e2c7 ("KVM: SVM: Add KVM_SEND_UPDATE_DATA command")
Reported-by: Andy Nguyen <theflow@google.com>
Suggested-by: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230207171354.4012821-1-pgonda@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba5838abb05334e4abfdff1490585c7f365e0424 upstream.
Inject a #GP if the guest attempts to set reserved bits in the x2APIC-only
Self-IPI register. Bits 7:0 hold the vector, all other bits are reserved.
Reported-by: Marc Orr <marcorr@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Venkatesh Srinivas <venkateshs@chromium.org>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20230107011025.565472-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65a8fc30fb6722fc25adec6d7dd5b53b0bb85820 ]
To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.
Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 36ec52ea038b18a53e198116ef7d7e70c87db046 upstream.
When we append new block just after the end of preallocated extent, the
code in inode_getblk() wrongly determined we're going to use the
preallocated extent which resulted in adding block into a wrong logical
offset in the file. Sequence like this manifests it:
xfs_io -f -c "pwrite 0x2cacf 0xd122" -c "truncate 0x2dd6f" \
-c "pwrite 0x27fd9 0x69a9" -c "pwrite 0x32981 0x7244" <file>
The code that determined the use of preallocated extent is actually
stale because udf_do_extend_file() does not create preallocation anymore
so after calling that function we are sure there's no usable
preallocation. Just remove the faulty condition.
CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85a37983ec69cc9fcd188bc37c4de15ee326355a upstream.
When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.
CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc8033a34a3ca7d23353e645e6dde5d364ac5f12 upstream.
System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 256fe4162f8b5a1625b8603ca5f7ff79725bfb47 upstream.
When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.
Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53cafe1d6d8ef9f93318e5bfccc0d24f27d41ced upstream.
When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.
CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70bfb3a8d661d4fdc742afc061b88a7f3fc9f500 upstream.
When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.
Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.
Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).
Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 366617a69e60610912836570546f118006ebc7cb upstream.
overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 236b9254f8d1edc273ad88b420aa85fbd84f492d upstream.
This fixes three issues on move extents ioctl without auto defrag:
a) In ocfs2_find_victim_alloc_group(), we have to convert bits to block
first in case of global bitmap.
b) In ocfs2_probe_alloc_group(), when finding enough bits in block
group bitmap, we have to back off move_len to start pos as well,
otherwise it may corrupt filesystem.
c) In ocfs2_ioctl_move_extents(), set me_threshold both for non-auto
and auto defrag paths. Otherwise it will set move_max_hop to 0 and
finally cause unexpectedly ENOSPC error.
Currently there are no tools triggering the above issues since
defragfs.ocfs2 enables auto defrag by default. Tested with manually
changing defragfs.ocfs2 to run non auto defrag path.
Link: https://lkml.kernel.org/r/20230220050526.22020-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream.
code path:
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
__ocfs2_move_extent
+ ocfs2_journal_access_di
+ ocfs2_split_extent //sub-paths call jbd2_journal_restart
+ ocfs2_journal_dirty //crash by jbs2 ASSERT
crash stacks:
PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2"
#0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
#1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
#2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
#3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
#4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
#5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
#6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
[exception RIP: jbd2_journal_dirty_metadata+0x2ba]
RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207
RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250
RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000
R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28
R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
#8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
#9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]
Analysis
This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.
How to fix
For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair. The fix method is to remove
journal access/dirty from __ocfs2_move_extent().
The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html
Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream.
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), f2fs encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a5571cff4ffcfc24847df9fd545cc5799ac0ee5 upstream.
When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block. Fix this by zero-initializing the block.
This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.
This was found by running xfstest generic/435 on a KMSAN-enabled kernel.
Fixes: 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00908b3388255fc1d3782b744d07f327712f401f upstream.
This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a58496361802070996f9bd76e941d109c4a85ebd upstream.
This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15c63db8e86a72e0d5cfb9bf0cd1870e39a3e5fe upstream.
Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more. This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39c1ce8eafc0ff64fb9e28536ccc7df6a8e2999d upstream.
inode->i_blocks is not real number of blocks, but 512 byte ones.
Fixes: 98d917047e8b ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdaadfd343e3cba49ad0b009ff4b148dad0fa404 upstream.
When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.
Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cb5d1a16a51d080fbc1649a5144cbc5ca7d6f88 upstream.
If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.
If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.
After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.
Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 706fdcac002316893434d753be8cfb549fe1d40d upstream.
Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.
Reproduce this bug by:
seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);
The following log will be printed if mount with 'errors=remount-ro'.
[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only
Fixes: 1e5654de0f51 ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07db5e247ab5858439b14dd7cc1fe538b9efcf32 upstream.
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb533473d1595fe79ecb528fda1de33552b07178 upstream.
ksmbd allowed the actual frame length to be smaller than the rfc1002
length. If allowed, it is possible to allocates a large amount of memory
that can be limited by credit management and can eventually cause memory
exhaustion problem. This patch do not allow it except SMB2 Negotiate
request which will be validated when message handling proceeds.
Also, Allow a message that padded to 8byte boundary.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f8c43b125882ac14372f8dca0c8e50a59e78d79 upstream.
When turning debug mode on, The following error message from
ksmbd_smb2_check_message() is coming.
ksmbd: cli req padded more than expected. Length 112 not 88 for cmd:10 mid:14
data area length calculation for smb2 lock request in smb2_get_data_area_len() is
incorrect.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b613c7f31476c44316bfac1af7cac714b7d6bef9 upstream.
A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:
Non-first RT waiter First waiter Lock holder
------------------- ------------ -----------
Acquire wait_lock
rwsem_try_write_lock():
Set handoff bit if RT or
wait too long
Set waiter->handoff_set
Release wait_lock
Acquire wait_lock
Inherit waiter->handoff_set
Release wait_lock
Clear owner
Release lock
if (waiter.handoff_set) {
rwsem_spin_on_owner(();
if (OWNER_NULL)
goto trylock_again;
}
trylock_again:
Acquire wait_lock
rwsem_try_write_lock():
if (first->handoff_set && (waiter != first))
return false;
Release wait_lock
A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.
Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b5463fcbdfb24e898916bcae2b1359042d26963 upstream.
Async discard does not acquire the block group reference count while it
holds a reference on the discard list. This is generally OK, as the
paths which destroy block groups tend to try to synchronize on
cancelling async discard work. However, relying on cancelling work
requires careful analysis to be sure it is safe from races with
unpinning scheduling more work.
While I am unable to find a race with unpinning in the current code for
either the unused bgs or relocation paths, I believe we have one in an
older version of auto relocation in a Meta internal build. This suggests
that this is in fact an error prone model, and could be fragile to
future changes to these bg deletion paths.
To make this ownership more clear, add a refcount for async discard. If
work is queued for a block group, its refcount should be incremented,
and when work is completed or canceled, it should be decremented.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd57953936f2213dfaccce10d20f396956222c7d upstream.
Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".
Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.
Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42e19e6f04984088b6f9f0507c4c89a8152d9730 upstream.
Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40
The reason for this error report is that kprobes handling code failed
to restore irqs.
The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep <- original kprobe (saves kprobe_saved_imask)
enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)
There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.
Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9c9cb90e76ffaabcc7ca8f275d9e82195fd6367 upstream.
When debugging vmlinux with QEMU + GDB, the following GDB error may
occur:
(gdb) c
Continuing.
Warning:
Cannot insert breakpoint -1.
Cannot access memory at address 0xffffffffffff95c0
Command aborted.
(gdb)
The reason is that, when .interp section is present, GDB tries to
locate the file specified in it in memory and put a number of
breakpoints there (see enable_break() function in gdb/solib-svr4.c).
Sometimes GDB finds a bogus location that matches its heuristics,
fails to set a breakpoint and stops. This makes further debugging
impossible.
The .interp section contains misleading information anyway (vmlinux
does not need ld.so), so fix by discarding it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c42dd78df148c90e48efff204cce38743906a79 upstream.
Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.
As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.
Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.
Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8230831c43a328c2be6d28c65d3f77e14c59986b upstream.
Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95767ed78a181d5404202627499f9cde56053b96 upstream.
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c88db0eff9722fc2b6c4d172a50471d20e08ecc6 upstream.
Make sure to disable the alarm before updating the four alarm time
registers to avoid spurious alarms during the update.
Note that the disable needs to be done outside of the ctrl_reg_lock
section to prevent a racing alarm interrupt from disabling the newly set
alarm when the lock is released.
Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Cc: stable@vger.kernel.org # 3.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67d59247d4b52c917e373f05a807027756ab216f upstream.
If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.
Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.
This depends on: 613b14884b85 ("block: handle bio_split_to_limits() NULL return")
Cc: stable@vger.kernel.org # 5.15+
Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio")
Link: https://github.com/axboe/liburing/issues/766
Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream.
The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.
Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.
Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.
[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255
[2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream.
Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 047a754558d640eaa080fce3b22ca9f3d4e04626 ]
The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f0001d43d0c0ac2a19a34a914f6595ad97cbc1d ]
At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.
Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76227f6dc805e9e960128bcc6276647361e0827c ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4f80303c2353952e6e980b23914e4214487f2a6 ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b2d8efd03d2e56431b611e3523f0158306451d ]
Another Lenovo convertable where the panel is installed landscape but is
reported to the kernel as portrait.
Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214164659.3583-1-darrell.kavanagh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 498ba20690357691103de0f766960355247c78be ]
Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0e4e2fab928477f74d742e6e77d79245d3d3e7 ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Link: https://lore.kernel.org/r/20230202141009.2290380-1-gregkh@linuxfoundation.org
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
