6f5adb3504
10183 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Rob Herring
|
4f3d7e5a0b
|
arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225254.2178644-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Rob Herring
|
bc2fb47db5
|
arm/arm64: dts: qcom: Fix boolean properties with values
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/Yk3m92Sj26/v1mLG@robh.at.kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Rob Herring
|
1bc12d3015
|
arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes
The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/Yk3moe6Hz8ELM0iS@robh.at.kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Rob Herring
|
1a67653de0
|
arm64: dts: tegra: Fix boolean properties with values
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/Yk3nShkFzNJaI3/Z@robh.at.kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Linus Torvalds
|
ba2d6201a9 |
SoC: fixes for 5.18, part 1
The introduction of vmap-stack on 32-bit arm caused a regression on a few omap3/omap4 machines that pass a stack variable into a firmware interface. The early pre-ACPI AMD Seattle machines have been broken for a while, Ard Biesheuvel has a series to bring them back for now. A few machines with multiple DMA channels used on a device have the channels in the wrong order according to the binding, which causes a harmless warning. Reversing the order is easier than fixing the tools to suppress the warning. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJGyNIACgkQmmx57+YA GNmThA//XLo6KAsI6/9LaiXFyTOLcaHRTlomRfgdhjTHe4jOMhBQ9SaxLcl3ocQa bqk3uG8CDQC240vCWw8kM+2UDWCwu4Z2lpJMM/Rmyz6H5vxk0s5ZdNeEDMogv6Gl /kzrmNuGdgYKifVNRh7oGpPSaP2vzcyzFetz0mcoZODDdvHjX9ci/6PeXnjhpXXd EkbKh9AlgAeqet0elLj3Vf/MxcwA7d7nLP5OcslPL0cfhrDi/+H/p0isKmXIl/S0 d/Lp5f5yXtyOtzqBh1VDJQ4u6+YwesxoWGRyjCmnEFl2MCOY8zTlxCa5q+InWV9s q2+wEWulGrk3SeI8LmUezNSdGs8UAlA659OtF0LWFKH79oLf4ug/qni2bTeNgPev CAhbyZJSeKk4JEdsFE2uhIPKKrDLmlwLQ6cY+Qz+EUDGfz1/wGaqyMk75IzMLW1q A72xEXoiMCTfN0faN2WiwglfUNjiR+JJIqTd0G+FOyNFjuKUyHU0xt+fTXnACoee VTxOTN13BfEGcWKSRRHt81/5jovSAK+0niV0InSZwcsH818LgPX+JsC3Z0DpdM5e Uq7ox9p7Gj1Y48SjQe09RmdGf+Jks17IHXMgDxt0lxTP1k/qhtDicKG+8p8Iwpu6 N2UwkcJPhDsFeZNQJvFLUrzHcU1QSF/CFGi2mTmRXTN62d+ssMo= =aPjb -----END PGP SIGNATURE----- Merge tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd BergmannL "The introduction of vmap-stack on 32-bit arm caused a regression on a few omap3/omap4 machines that pass a stack variable into a firmware interface. The early pre-ACPI AMD Seattle machines have been broken for a while, Ard Biesheuvel has a series to bring them back for now. A few machines with multiple DMA channels used on a device have the channels in the wrong order according to the binding, which causes a harmless warning. Reversing the order is easier than fixing the tools to suppress the warning" * tag 'soc-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: ls1046a: Update i2c node dma properties arm64: dts: ls1043a: Update i2c dma properties ARM: dts: spear1340: Update serial node properties ARM: dts: spear13xx: Update SPI dma properties ARM: OMAP2+: Fix regression for smc calls for vmap stack dt: amd-seattle: add a description of the CPUs and caches dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0 dt: amd-seattle: add description of the SATA/CCP SMMUs dt: amd-seattle: add a description of the PCIe SMMU dt: amd-seattle: fix PCIe legacy interrupt routing dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding dt: amd-seattle: remove Overdrive revision A0 support dt: amd-seattle: remove Husky platform |
||
Kuldeep Singh
|
eeeb4f1075
|
arm64: dts: ls1046a: Update i2c node dma properties
Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.
Fixes:
|
||
|
Kuldeep Singh
|
aa4df840d1
|
arm64: dts: ls1043a: Update i2c dma properties
Reorder dmas and dma-names properties for i2c controller node to make it
compliant with bindings.
Fixes:
|
||
|
Linus Torvalds
|
7203062171 |
TTY/Serial driver changes for 5.18-rc1
Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are
still creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkGznQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnFwCgwGD/syV+BH2krgY6cRixZz72vPsAn2RSnicd
2YUwSNCHoL+B7hvQMtDG
=A3X9
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver changes for 5.18-rc1.
Nothing major, some more good cleanups from Jiri and 2 new serial
drivers. Highlights include:
- termbits cleanups
- export symbol cleanups and other core cleanups from Jiri Slaby
- new sunplus and mvebu uart drivers (amazing that people are still
creating new uarts...)
- samsung serial driver cleanups
- ldisc 29 is now "reserved" for experimental/development line
disciplines
- lots of other tiny fixes and cleanups to serial drivers and
bindings
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
serial: 8250: fix XOFF/XON sending when DMA is used
tty: serial: samsung: Add ARTPEC-8 support
dt-bindings: serial: samsung: Add ARTPEC-8 UART
serial: sc16is7xx: Clear RS485 bits in the shutdown
tty: serial: samsung: simplify getting OF match data
tty: serial: samsung: constify variables and pointers
tty: serial: samsung: constify s3c24xx_serial_drv_data members
tty: serial: samsung: constify UART name
tty: serial: samsung: constify s3c24xx_serial_drv_data
tty: serial: samsung: reduce number of casts
tty: serial: samsung: embed s3c2410_uartcfg in parent structure
tty: serial: samsung: embed s3c24xx_uart_info in parent structure
serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
tty: serial: bcm63xx: use more precise Kconfig symbol
serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
tty: serial: jsm: fix two assignments in if conditions
tty: serial: jsm: remove redundant assignments to variable linestatus
serial: 8250_mtk: make two read-only arrays static const
serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
...
|
||
|
Linus Torvalds
|
02e2af20f4 |
Char/Misc and other driver updates for 5.18-rc1
Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates There will be two merge conflicts with your tree, one in MAINTAINERS which is obvious to fix up, and one in drivers/phy/freescale/Kconfig which also should be easy to resolve. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC R4bgCjfg8BWIBcVVXg3/ =WWXC -----END PGP SIGNATURE----- Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ... |
||
|
Linus Torvalds
|
710f5d627a |
USB/Thunderbolt patches for 5.18-rc1
Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups and
new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list
(a common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
Note, the DTS updates will have a merge conflict in your tree. The
fixup should be simple, but if not, I can provide a merged tree if
needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYj7qpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRsQCcCryYifAvE2gHaNfI4B01JRWk7gQAoLNiUgvl
l+srEAXgIVueDhmDxy5P
=/Ppv
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
|
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
Ard Biesheuvel
|
6a2f0b2d3b
|
dt: amd-seattle: add a description of the CPUs and caches
Add a DT description of the CPU and cache hierarchy as found on the AMD Seattle SOC. Given the tight coupling of the PMU with the CPUs, move the PMU node into the cpu .dtsi file as well, and add the missing affinity description. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
e0db1597a7
|
dt: amd-seattle: disable IPMI controller and some GPIO blocks on B0
Disable some peripherals that are not usable on B0 silicon based Overdrives. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
429863e767
|
dt: amd-seattle: add description of the SATA/CCP SMMUs
Add descriptions of the SMMUs that cover the SATA controller(s) on the AMD Seattle SOC. The CCP crypto accelerator shares its SMMU with the second SATA controller, which is only enabled on B1 silicon. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
dd5c160655
|
dt: amd-seattle: add a description of the PCIe SMMU
Add a description of the SMMU that covers the PCIe host bridge on AMD Seattle. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
acd9208ef8
|
dt: amd-seattle: fix PCIe legacy interrupt routing
The AMD Seattle SOC can be configured to expose up to 3 PCIe root ports, each of which is wired to 4 dedicated SPI wired interrupts for legacy INTx support. Update the SOC DT description to reflect this. Fix a stale comment about the size of the MMIO64 resource window while at it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
9bd9a063ac
|
dt: amd-seattle: upgrade AMD Seattle XGBE to new SMMU binding
Upgrade the DT descriptions of the AMD Seattle XGBE network controllers to use the current SMMU bindings. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
f179eb6b3c
|
dt: amd-seattle: remove Overdrive revision A0 support
Support for AMD Seattle silicon revision A0 is no longer relevant, since we no longer have a driver for the network controller, and the PCIe on these boards was very unreliable. So drop the DTS description of the A0 version of the overdrive board. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Ard Biesheuvel
|
a4eb44a643
|
dt: amd-seattle: remove Husky platform
The Huskyboard never made it to production, and its successor the Celloboard was only shipped in very limited quantities with ACPI only firmware, so the historical significance of husky.dts is highly questionable. Let's drop it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
ed4643521e |
ARM: DT updates for 5.18
After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
|
||
|
Linus Torvalds
|
356a1adca8 |
arm64 updates for 5.18
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J
ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L
oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4
04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT
PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU
KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv
=ziGg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
|
||
|
Linus Torvalds
|
14702b3b24 |
ARM: SoC fix for 5.17, part 4
Here is one last regression fix for 5.17, reverting a patch that went into 5.16 as a cleanup that ended up breaking external interrupts on Layerscape chips. The revert makes it work again, but also reintroduces a build time warning about the nonstandard DT binding that will have to be dealt with in the future. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI2ZjkACgkQmmx57+YA GNkNgg//eTPKd0JH0GbxCKDt2afKMKsBmI71/a2z6M4fWsT9s53Sn+4eG+RO+Q1J y+yaXJTnOEHh9FTXDxDxL/+5Xn/URxL1mzqMxM6LMQRu2b1fe53jC9GzOC779s17 pLyAHvRuwhDxvBUOVRWNZz4OoLQ5ap0aVDFTwuuEkjB9DBxdGzxhAuKJMGMHEKeH NBySAkJKa3xFSHCrPYI/T+MpoCizQwhehYT8OSzRgme2dtSmQ7jj10io1k3GAz0G mzS3BkOVIFMjif/s/Qci35UnQE9P1S/wN2Eg65Z2X1Z/sosuwUzP9uM2lBtTp59V c7LwTDkQhhEnyGWJeEwvNx3iJw5kJjxuZlvNVwUFmK4ckEzQss7jD3+oe+/3wO8Q zAantKWF87POOnie06cSbVfxeb5Iwbam6UQq+YRJQb5ybNNyt8akcINReSizqRHI qFKLDXYmewdJWwI6JuvHW+tBRH++O48Gzq71UANgPJYD8Km4T6YdpzKkfhATisZZ OpV7XqajVRWXqn5AdB8aA+MlKNMUBgkXKdZLxsoBaAkmhB+RvptHZBEaIS5Lt7Lj KaIS5KxaHTuZ8n1nZXlkUAnZ22wG1us8njM+iiaAnuhdFO45L9ZikvHrQWiJVYtB 9XUa9WHg95DNYbmA0ZS/p/7Dm2gu9lWoCjKrMjy7sWPnOtzA1M8= =GWWD -----END PGP SIGNATURE----- Merge tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Arnd Bergmann: "Here is one last regression fix for 5.17, reverting a patch that went into 5.16 as a cleanup that ended up breaking external interrupts on Layerscape chips. The revert makes it work again, but also reintroduces a build time warning about the nonstandard DT binding that will have to be dealt with in the future" * tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells" |
||
Krzysztof Kozlowski
|
bcea9aaa43
|
arm64: dts: n5x: drop invalid property and fix edac node name
The intel,sysmgr-syscon in EDAC/memory controller node is not a
recognized and documented property, so drop it to fix error:
sdr_edac@f87f8000: 'intel,sysmgr-syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Align also the node name with Devicetree specification (generic, not
specific, and EDAC is purely Linux term).
Fixes:
|
||
Jeya R
|
8c8ce95b6f |
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
FastRPC DSP domain would be set as secure if non-secure dsp property is not added to the fastrpc DT node. Add this property to DT files of msm8916, sdm845, sm8150, sm8250 and sm8350 so that nothing is broken after secure domain patchset. This patch is purely for backward compatibility reasons. Signed-off-by: Jeya R <jeyr@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220214161002.6831-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Alim Akhtar
|
bfb60ede2c
|
arm64: dts: fsd: Add the MCT support
Add node relevant to support MCT, which is used as one of the system timer on this SoC. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220223171858.11384-1-alim.akhtar@samsung.com Link: https://lore.kernel.org/r/20220316154309.436028-2-krzysztof.kozlowski@canonical.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Vladimir Oltean
|
1447c63580
|
Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"
This reverts commit |
||
Biao Huang
|
79e1177809 |
arm64: dts: mt2712: update ethernet device node
Since there are some changes in ethernet driver:
update ethernet device node in dts to accommodate to it.
1. stmmac_probe_config_dt() in stmmac_platform.c will initialize specified
parameters according to compatible string "snps,dwmac-4.20a", then,
dwmac-mediatek.c can skip the initialization if add compatible string
"snps,dwmac-4.20a" in eth device node.
2. commit
|
||
Greg Kroah-Hartman
|
7f220d4a38 |
Linux 5.17-rc8
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIuUskeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGCFkH/2n3mpGXuITp0ZXE TNrpbdZOof5SgLw+w7THswXuo6m5yRGNKQs9fvIvDD8Vf7/OdQQfPOmF1cIE5+nk wcz6aHKbdrok8Jql2qjJqWXZ5xbGj6qywg3zZrwOUsCKFP5p+AjBJcmZOsvQHjSp ASODy1moOlK+nO52TrMaJw74a8xQPmQiNa+T2P+FedEYjlcRH/c7hLJ7GEnL6+cC /R4bATZq3tiInbTBlkC0hR0iVNgRXwXNyv9PEXrYYYHnekh8G1mgSNf06iejLcsG aAYsW9NyPxu8zPhhHNx79K9o8BMtxGD4YQpsfdfIEnf9Q3euqAKe2evRWqHHlDms RuSCtsc= =M9Nc -----END PGP SIGNATURE----- Merge tag 'v5.17-rc8' into usb-next We need the Xen USB fixes as other patches depend on those changes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Alexander Stein
|
290918c72a |
arm64: dts: imx8mp: Add memory for USB3 glue layer to usb3 nodes
The USB3 glue layer has 2 areas in the register set, see RM Rev.1 section 11.2.5.2.1 GLUE_usb3 memory map: * USB3 control/status * PHY control/status Provide the memory area to the usb3 nodes for accessing the features in the USB3 control area. Reviewed-by: Li Jun <jun.li@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220218152707.2198357-5-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Souradeep Chowdhury
|
bced4afc53 |
Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"
This reverts commit
|
||
|
Souradeep Chowdhury
|
45a7dbf484 |
Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
This reverts commit
|
||
Ioana Ciornei
|
3cbe93a1f5 |
arch: arm64: dts: lx2160a: describe the SerDes block #1
Describe the SerDes block #1 using the generic phys infrastructure. This way, the ethernet nodes can each reference their serdes lanes individually using the 'phys' dts property. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Arnd Bergmann
|
2ef363660d |
SoCFPGA dts updates for v5.18, part 2
- More dt-bindings cleanup, this time, USB DWC2 properties - Add SDR EDAC dts entry for the N5X platform -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmIqVDcUHGRpbmd1eWVu QGtlcm5lbC5vcmcACgkQGZQEC4GjKPQBlg/+K1RxICX9jsesUHvKELOpYntIQYMz FitiGVwnR8bwW2QkL77wiZ4UJu+cWUvFpKHvWI00V9sFFA2t07vaNf6tWoaCkwxA 1Nkdlb8lpCzbzPgHREqUJH4M0spijVecp1PoOKnkZ9v/K/l+/bDR4vQb1PvHB3Nt QqXp5dzBMA/P3DjNgfyMeA0PlPYjY//10waeyg7CzoXGVHFS46txVOzFBKE5gAro HdMaBTDjCf5nxBikjcRb7rKZeri8T9hnlRgM31/1JF0Xdgbu/At4EbYsUkekawfQ PmXiMJ29I+QWmkdVayAwmcoG1JaWrwINVbn7oCzg/DKr+GwqaHKLXw4PCZWfCWSO RX0x0CUNi0q2unO27EgJ1JRYjVkXuEyu9Ict1AkZzDbleNEw97Mc++n3lhpun/yf ej6Ri7LbgAEomg7ggqhtPuToi1Z1K/aiw4XA3hakpIhHYj8yZKRMFL9wsfltReje fetv9I28lRcVPUQOQCSTfqkMng64t2m/ujdJU20xxIHJEFCQ/ceWAgsSM+w+EFmS W7lURfh84cQSNpqIIPWUiD+V1hd0KiDAaVBelPuETWbJKAIZJL2kEc8FX8LMx7wJ Ipm8btQxcRvZlcnrp3yakYFvKDUuq40BLdq3IsY01VzDvWJ5L7EbGm9viz0SdCsQ Zkvx4Oxy/asoLzY= =0KoN -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIrHj0ACgkQmmx57+YA GNmZehAAmuQu+xR+lNKehP04BKl70a7K75DbwlJXyNK43AM11i5oifoxb/Q8jLFk Z3pyWQGwCpRyYl1PXPT6Lim8ONQp0Gq66iVQOn4sSfFWbsu4fInLvcMpP2UUAJlM xstGQGU6ErG53+t894VydurKsd8ulAbJjfTvaOu/7oML/YfNDSCMznY2oPS7DX6C v8CJBU+jEouNwK6A00Xc2dOty4ACucLF6Rd5PNPMd5EK9KaVJfKne1kfuYgeB5AE A+gaKPWuytmELUp6JbYTM9jkQfatTDkI5KnF1LeWI2k99vnCsuqsD03A1mSKylaD mKjAtkbnQoaRqQpFaTdUTDSzYxfSfW+dnYHE+pn9biEGrizXZjSZScaFpcROLtXW c4STob9Qq8s8Ar7IEI3m2qtPqxtscy4IGMlfQBsMSPUK98rOhssSZo30T0brIjuO WFPhXoCg9XRjKsbZA0cgCVKU+CMUF2UBYAt/DNh7hIH9JP+O5HEUf86q383nqY1+ gquaOZwKu7silxm3hZztfmlxrswda+Gji5pPNoPnTaC9SVj2LMM5qSQy3lmgOYpr 5eHkzvKoX5NTPnw/FJEByQe9Z7MUACvdWX9Sf4JF/bF295TFzsag3ezXFaJS/qgQ HsyXSmIJRFXoOczvOkjzQVR7Z60ebd3A6cUZEIAXy5NLa46ERS0= =WKwX -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_update_for_v5.18_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA dts updates for v5.18, part 2 - More dt-bindings cleanup, this time, USB DWC2 properties - Add SDR EDAC dts entry for the N5X platform * tag 'socfpga_dts_update_for_v5.18_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: n5x: add sdr edac support arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node dt-bindings: usb: dwc2: add disable-over-current dt-bindings: usb: dwc2: add iommus dt-bindings: usb: dwc2: fix compatible of Intel Agilex Link: https://lore.kernel.org/r/20220310195740.151250-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Jakub Kicinski
|
1e8a3f0d2a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/dsa/dsa2.c commit |
||
|
Linus Torvalds
|
55b4083b44 |
ARM: SoC fixes for 5.17, part 3
Here is a third set of fixes for the soc tree, well
within the expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have
new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge
patch that caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65,
Qualcomm sm8450, and Broadcom BCM2711
-----BEGIN PGP SIGNATURE-----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=A4g/
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
|
||
|
Arnd Bergmann
|
7e606edaa0 |
mvebu fixes for 5.17 (part 2)
Allow using old PCIe card on Armada 37xx -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCYioC+wAKCRALBhiOFHI7 1YTCAJ9B44SBSCWSGFEBeO/aE6XxT3EbcQCgiMUGAwdvTQ7rYUNiCxc2/In72L4= =wqVm -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIqCmoACgkQmmx57+YA GNmfmhAAmUeMbp4Z6PpQ2Vj5+INHxf7STMWnCRBtHxWWdlCcglz9sep0ANfuf82D ewt7dM5WTRNefoRI3/36lhqBO3TGkycY3XQj+2LEO0DrqOyPGiEOi5iyqWpG9pLc hoAPa8Pi7qaxkWQ7yccJi3us8Y6VmdMHEOb3SlTgaJBP88eAVhsdbB7Cgq4RxbXB UOdWYAgEje89TNy2g80+zTmVEwS4OHgf3YID1/bB8a7FoLlEJ3N3fnVINRsPVZoO yY7a3UuHlnDZGQ6aXTkoteuEXNTPIhM+FMIwbZ+svp6leESruWnVrEbXjnOk4E62 tPWbL67+YOHahcOH6yXs5xNt70ot/lz6XjpEm9X5+lCtbAfT75eq8YLFRze6jQ+2 BcFvon89OcTdF7iYEHxR1r+8+oAZ8UwSzEG+kB1IO27hfN7P53cd9WXO76ir4u0j voGp+CFC5AjJwpvZd+eTqq/049P18pXZT7iPdP2QgIjMrHnFTGJTzhtY8ca0R61d YpS3nYqjgkWb5Xk/BcuPLkVPWxkcQsKxe0u2z1j/S8W2b7GpCVkxH9zK98Im5Jvk GEwBGFFN3LhOzX4Ueb9H/q2Ao/DshAKdj3FtkfVEoFRBKS9R8FZx3hACv8vrUJom 8BzParaqTb4pF2biy3N+Z+1TRlXoqbRGhpZSegpVA/IBM9FwTBY= =YxFV -----END PGP SIGNATURE----- Merge tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.17 (part 2) Allow using old PCIe card on Armada 37xx * tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Pali Rohár
|
a1cc1697bb |
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing. Since commit |
||
|
Arnd Bergmann
|
fc30ed4edd |
Some corrections for the rk80x pmic nodes, a supply fix for rk3399-firefly
and addition of the usb/sata combophys for rk3568. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmIpUyUQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgTgJB/9273yq5wswjXcC/CtEAcK2/TO4Eq8F9gJh daPlyfyIwjSxcmepnzi0FwanmAmVumKKY6ECsSS2klz/zEKg9HbURljOjOUJjxnw G/ci7Ww59CKkwP3iiCT37GXry3VKXlmWEItPgyUOVPl+MMz7TTLym86hTagVj36x DGvDLPKL40hQsRvVaFHv8fgDgzFPBr/f9rcjRl8s+8IT8WHvK5PIq+KfqH2bzUHo SaiWI+ggq6SJ/QOaJHOHd+iAFp8rR7jYItYNkMNdgvmTk5WlHJaKtyESpiSsOqya WdGqLEnFGJg27ARI7kRsJZJw/g8HgxvFVhvSij33gGxv3MaCavB/ =ohid -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIpt5gACgkQmmx57+YA GNmSmA//SbdXtFqslmgLlXDgJOcMknvv29pw2guxUkSI8cJcbysGHLuF+tAaECXP vZHD7xavpxtBq05N/aECHt0UfpJRm77ZRUnR5mcm1y8kFAgndpVQrOvDgDGOv9Yu RBL4evHk/Dhtledz0OKu+HWPWg8seyaQeO8AMxAuBcQXPJf7EhQCWA605aYAQRTb 8zMMr5MFg9POjFyqAgi3L+ZLVrvoF7E87ukdKriYgJRxcT8uBgNofaqQRh0LGQFU RkoKpoWtRNF7I9+omfYhbLGTvbWBtq85yLYFEaSrreWJgttMuUxqro7oBqMftNr9 okMYfZ/IZey3BWN2NzlfcBbl3QfDZlhaWxLSOTkhf/aszLbas18bXrs+e5Vy3i/I lWHrkO2C3gesQLMU80Hbq2yVUuXYsNB/xbRfrieRY9c2za2xJ6pZcLAHGgwBAIFa ikLQdGGLZIHwbnUAUNUvPWHFK26BGyYKin7xgKDdHJDvRPXLR2Q5ZUp9CW7CAd4G KjjoXv3hkLRtt9zTiOFur4oTPLflXf0m4Z59/N79LiUoZSZQDAn+kVgRRovFUsF7 i+JA6yb0Bi10f/7xZYKAR2oJ8qRg9rWHbHgpJ4IWWoKbUM0CkHxFYwG8eh+GcC37 JV+QBxjwsm41Wg1/r7rzMqSgDoquCD5we88JKwHS+iiUm2P+XJM= =hcVs -----END PGP SIGNATURE----- Merge tag 'v5.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Some corrections for the rk80x pmic nodes, a supply fix for rk3399-firefly and addition of the usb/sata combophys for rk3568. * tag 'v5.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add #clock-cells value for rk805 arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808 arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly arm64: dts: rockchip: add naneng combo phy nodes for rk3568 Link: https://lore.kernel.org/r/13959624.7hp8jFWaoN@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7b4fc7c6f9 |
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 5.18, please pull the following: - Krzysztof aligns the PL330 DMA controller node name to the schema - Rafal corrects the TWD (Timer/Watchdog) block, adds the watchdog node, I2C controller node and the pinctrl node for the 4908 SoC - Kuldeep fixes the Northstar 2 SPI properties as well as the PL022 SPI controller clock names - Frank fixes the SATA node names to conform to the AHCI controller schema -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmImX64ACgkQh9CWnEQH BwRKhQ//RUIUtJqWOZNMkvspu2VaIOa4DeDFXHQ2F8X7hoRsRw93mksxk90xBuIG Oz4UdzF5D0cKwXdlNWeJ3V8er6qSkl5V37Z0iBUft6n1vYiqPzQHAG7lvI3r0ZNX Ial9H1TLuT36CeubcUlb88ztPvMZYDPoUDFQv8GKoavGldwMithoHe6SZ3SFGFVh /lzRyqJImJR3wITZJboLdyqkUvksj1lofR0kRM25bNZ1QeDxzEdA48svZYnexnGh PNPGvuhNlT63CBSdteXs5lU2pmt6OhaxUH6Vl9dWE5LznqCrEPAlSy6jiNsymgHp GqijueWGQyVQYqCE2T0VNowCTLY1a3bl7rFQUigZLCurbqYr932GwZP+r/1/xfqI pP96QjA/Fz4fjuH9yZ30dTCB3xe69GurM80V3udNi1nr8ExDjOY/3rmrEmKVLKDR Y94wgzjgzy1Wopvnzu9CtlabixQ7sv0NLJB6YjSSqc+ziBZsnJOl0+b7hWaBTuno UxBY3pIsekBg4MP6evPHs8muUHO9STXijDwnny6tNj5o/usGrfWIBtilNYnAYg/1 /3UWnDArcV+/zpRhIwsAwYb19pUBOQCpKFLdZYw4yNss12KLqxvmA3fe6JXAu9HF bmCUEjAwuf3mtEN41V8Tjyp3ftuh7rO3VVjDuT72VfYiEh2QtKU= =nJaL -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIndl0ACgkQmmx57+YA GNk5PhAAxL+CTTI8nidIhzO5kO/KZ4NIb7LO/QnMWknn+HeUdXPl0GDRyIpsXml9 X5qcIzL4Npj0U8+UAHYarT6ngDcj8EZDWv+H5zRmt5qXSNhpfnlm+1OEgicy8Y1u XwgIfLtGbdE9w05i9fPPtSIjoAjMQpJEplOkKKzex3k8GN653dT8bLm/manevoL7 7Sn27jxfQUcRM10QOJcWmF1fqgdl542J31bE4xl1axXww1Fa6aoZAXeeh+XlO8KB oXJhcw4HLW7LKpZUESCwTiXS7fymSgp73U2bRhr41g40BPzt8wJbmS5MMsY7eiLP 9+kgfswtDrNt5NBDHFye71bU1YXvIAdcWkexlJfio8bsv8HweS+hU61+jpULpbtp EzttCHoljyyAIpnjOMe7mrQKsm4hTnTcB0vKBgZqpxAlLZaoKcrkknfZz57nwcHL xLtkug5lEp6jIXtAAQAYZ5ZwkQCUo4oaHlN16DypGvAsvSUd3UjQbLJBtfb7joac wQ8stJQGhMcSzjyiOAEwSHqJeau9uJ03xWHrKNYPAx8aj5eVtNLMXxNcq69mzMvb BbDUt8SMedxxficxteZfC3tkoH6CQ+zOHSEAzm/A+Q0GvJkxOkyDt6IW+BE30bGE vDzfJmwBrf2N8FhnkbJsob+vlWZuAz4ezM5q8i4zHx6U2MoSc3I= =B+QM -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.18/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 5.18, please pull the following: - Krzysztof aligns the PL330 DMA controller node name to the schema - Rafal corrects the TWD (Timer/Watchdog) block, adds the watchdog node, I2C controller node and the pinctrl node for the 4908 SoC - Kuldeep fixes the Northstar 2 SPI properties as well as the PL022 SPI controller clock names - Frank fixes the SATA node names to conform to the AHCI controller schema * tag 'arm-soc/for-5.18/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: stingray: Fix spi clock name arm64: dts: ns2: Fix spi clock name arm64: dts: broadcom: Fix sata nodename arm64: dts: ns2: Fix spi-cpol and spi-cpha property arm64: dts: broadcom: bcm4908: add I2C block arm64: dts: broadcom: bcm4908: add watchdog block arm64: dts: broadcom: bcm4908: add pinctrl binding arm64: dts: broadcom: bcm4908: use proper TWD binding arm64: dts: broadcom: align pl330 node name with dtschema Link: https://lore.kernel.org/r/20220307194817.3754107-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
dd5d787f48 |
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following: - Arinc defines the switch ports of the RTL8365MB switch on the Asus RT-AC88U - Richard provides cache information for the BCM2835/36/37 and BCM2711 SoCs such that tools like "lscpu -C" can report it when supported - Stefan adds support for the Raspberry Pi Zero 2 W (wireless) - Matthew defines the MAC address NVMEM cells for the Cisco Meraki MX64/MX65 devices, he also fixes the LED for these platforms. - Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmImXvIACgkQh9CWnEQH BwTVXxAAoyyP5yDDRysvcEoK0bgNnInp2RyVbYPgI/lMCkn5Ngs/9jTPEveVO3hq UOljI3uqmi4h+K+bLp7NpqybiueFH/92t26J2V+mqRQ7G1ivKnHXh08B3LBv5OU0 IeOQgUwe+lQLlb6boH4O7dvju/3cnBpJUGW4KZpAzjxtmyRjekutmd+dIlkJr7zM jvNT+MLvpapCECWgXYo0km7TP1SnIB9TG1EWFPvf7YjYfBhroLEeKQS7K1VANtjG sVP0FVAuiXRx4cs751EnGoIR2Nla+XrbYrJxZBya81xAZ3rCzwjxbGztdCFDqm5j gf4D3Ww4NZHVIONOJOWGy7c6KIU1aiSGPzNaqK8rNGyxRH6cmavh5QEIEb6fSQOH 9Gyg0aEbxxaH/j75pa4e60pbivise7+TI1yN23aJDTaIKTEYtkSADVZw3PW++il6 kIOaCGmOaYHMQRCByjTxg6soqbaaSuUZ/A1Frh1Ox/EpfU+6N04+RC+D2OPuSPT/ yuN0P3gYo8/Le1Zv1RB2+0CmNsgrAiRFy9kbD//6WEOaa7r7t3z4RTfFduGrZF2R XtxDatKKqIkNpWmHp0s2g28QXcDow1mnM/x6g6aA2UR8rCj7mg/odULZyxqStGxj ehh0M7gZo1P92HVf+HT5A6t/jXk+HEw0xddRh+xdzzrd+JHwTUo= =ZPvV -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIndXEACgkQmmx57+YA GNm+zA//RCHiiWwfAgJXPquuZcdcioZw2R451MmvgfVA1ST2hTZexL2jkHym6X/b UE01YttV0A82JNWy+4zxMVkTefjhbp+rSNSSlMHN+Z3SXIXOZSIEW3eWc+D6UCqw /XQx8wthJUDCPdGw+e1sW8GqcagY6uwa2xyrBGlhQu9uv7Waor+Q6rbUOKRCr9oD j4o3wFdBFrMRCg6AzGhchDJ7454C87Nc6hC5xpst9za2O+4uU6LE3GOMuWEHQmTz hsqkuOPvMNW+6dXicC6nihRUdRS6Km781VFtc5+7xRvPRqpzdAhi83dJz0KmL/Aq mucnIn+hfPvL6DMGUzSLh+fGR3e2m7586RA7IeRA2Bd/xyJsEBZr59iXg+qhde3V 0odwGqRNWPR5XKOhkSTBW5+JJZveCk7QcLvIYdfPMiNMSEBCSt8M46golgWTmbgA RB7cOzp5OPUjNmKKN2io4VO6pmnsFUT5ygR652x7LgpX/5t5nanjrOAOQJbObEid kgO8lFd2arOBW530x6xAyW/RGNZ7rbrCQVoa1jXD5lP1V3isGl32weNp5+dC1OeF IvEeU7chZli0dXpmKuD8tKU4M0XStBmMYQJHu44UArjYeB4gSR/aYztkaUhX01Aj jWILMQPMgfvEXb6NYqqxgJhmNpbscwLfhUHDu0gUJ2IhBwRKwTw= =8qCg -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.18, please pull the following: - Arinc defines the switch ports of the RTL8365MB switch on the Asus RT-AC88U - Richard provides cache information for the BCM2835/36/37 and BCM2711 SoCs such that tools like "lscpu -C" can report it when supported - Stefan adds support for the Raspberry Pi Zero 2 W (wireless) - Matthew defines the MAC address NVMEM cells for the Cisco Meraki MX64/MX65 devices, he also fixes the LED for these platforms. - Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150 * tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150 ARM: dts: NSP: MX6X: correct LED function types ARM: dts: NSP: MX6X: get mac-address from eeprom arm64: dts: broadcom: Add reference to RPi Zero 2 W ARM: dts: Add Raspberry Pi Zero 2 W dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W ARM: dts: bcm2835/6: Add the missing L1/L2 cache information ARM: dts: bcm2711: Add the missing L1/L2 cache information ARM: dts: bcm2837: Add the missing L1/L2 cache information ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
e8f022f9ec |
Minor cleanup of ARM64 DTS for v5.18
The DT schema expects DMA controller nodes to follow certain node naming and having dma-cells property. Adjust the DTS files to pass DT schema checks. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmImQd0QHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD15hhD/99coMYC+XVBpdu79/HtEv86ALj15ydibAZ /uvhf/DuVooZYw1QBX4wVjJN6nBF9UYHmxy25bnOx6Ufs1l961FjM5vguClgkZwJ aCF7vbLRtkGnPWqDtdhRhxwf4XXW0kIMy58HvRxXzpo2i6xWwx+GRluvAWHaqrL+ Fn5Q35NxJWAKovGI7DXU4xQfC0vvY8MSArcHmz6CbQqwPx9GouFXb6n9olUmcW3d wQj7SsuOsvMrhF6mWr4uO39tOR9JO8CdAZjoUkM1EoV4lP4zDMWJ20p4Ocmg+HXG s153aMXKWC5QbV2x7cU5NRX0D/a3M5bxUPJ6h633iB2yZ0GArOlKr/te0qPf+cV/ 7LBfLymQmAufd5I5UVrWURcWgx1LgD01MsSifnPs5YR9yykPeKCDeCwJrysK1zHc q3aBfWSXsZ0OtFi44a9leJiEkwa67gRAzK0UvKVYJHkd2hRIPlymA2ZTW8NxM6TD RCsGjxQz5imvAPR64vKeIpfzWNzAZd2KOaNn0maz0ej3JyFdRaVjgszaGOPfmP9u 2UqqFeQfv8UGpXdvC8nbc29szqRPYANmXNKZwJZ8ztFnteJx4I+cJcw3SE1u192T ulhHGvwh1TZFZrUjGU052bINM1S3QXvsD/kHhDg+sJzfAetcSM9mlIgnEjPF9vg1 l/vuEeolxw== =/7Y4 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIndUEACgkQmmx57+YA GNmauxAAptI+unmLKDUClEJHKhSITUh8Eh3qdKJKKN4LbaGce7Abu5Utp6eLILvH trhxv3/4AXMGRkrl5JATyks2OYVaOvwhQJs5iQyMnkJ/6W8Y/q4DdCPbSB+tywmo neuUCfovsW6Y2Bt6+jMxVYm0LuA7/szC3+9HwX3i3tD35ceWFSWfTatGqCSuSveB TxdAU3GfA+KyL/czxjvOdwgB2omSfuOs6dDvm/qT0bwEUBJI/0djXn209cRylcSx d/oU3G2Cb3SHtTAQfFVrzHENLPpyiZsVgfc6FutRaGjnXI0cUH7TM8k8KtwztCcE QMadmK1JLQUoIruj5Gf3eNjTOaqc3nDk5m+6R/bK3lMLtEhg8Qx5UhTCRI2OE8F8 wURjGsww/eK26ucUwD8i+X4KzVJlrUrYGslRO3z984vCfIRtH49d9RcsiAwsd8+o 6O/KH//otebn7AAfUHwmsODTuq97j/5Y52gJAMOoz03CwNC6wS5o4g2eK9vpPZSO fLhKMMPyEeakg/Lal71KJ/ZYD0HuRoWoCzqZr0dWQIWd2hY/SuOKGhgxAKo+S2zt ZPTRsaLoS9cJydpd3+p5EWMsQJt6CvPaM1lz5PgxYMTFHsx+SUNOxERsqHpH6YTb jYD2O0jpxbLKvAqrrkkr5mqQTnu5RYKKnyy/3dP1vyuYtGvbctU= =7PmD -----END PGP SIGNATURE----- Merge tag 'dt64-cleanup-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Minor cleanup of ARM64 DTS for v5.18 The DT schema expects DMA controller nodes to follow certain node naming and having dma-cells property. Adjust the DTS files to pass DT schema checks. * tag 'dt64-cleanup-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: lg: align pl330 node name with dtschema arm64: dts: lg: add dma-cells to pl330 node arm64: dts: juno: align pl330 node name with dtschema Link: https://lore.kernel.org/r/20220307173614.157884-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
756f4ae145 |
arm64: dts: ZynqMP DT changes for v5.18
- Dropping #stream-id-cells - Add missing dma-cells and change dma node names -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYiDcywAKCRDKSWXLKUoM IcGaAJwKIckkfXL3q1BwYtd5TWz+Cxb/OQCZAdumbjGsl20YiLl70W5R82pS0Is= =gb7o -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIncPUACgkQmmx57+YA GNmNfw//USkXcgjQFbKRPPJj7BaSNSBOZQ7439ReGN+39FpRcdlCLH+cdG+0qLLg ntacDpglzx6K2hg5KvPLHRQgMsxXV3mooxBj8OHMUYt98zjiMtjNtlrIZmQEvtqM OG7s3aXB9xldSYa3kCMV7jKYy2bwhFeOe9qcTVFF09vUN+Hq5vB+n+H0FP13bnIE I/galZvks0AcimyGjUQrvz8ACGTF3vTrV3Hup6wNI1tYvGBPRYnPFCddXHeIqO5K zjf/jxGZ/iIP43e8mkhiAvq4Nq3pJm1E2PrZv5p333wW1e9Tk1XeXeOc+1asGgAU Tl3+EriL44OAXuqml2cWtBEcd+HBWfNwEod7qmsWw/MvG8KIWNy/SI9yROTwQwht BMewg5d9Bn3dR3vaVoUcCEWHi4r+b+hkNt/8R3zwLI5BdofbRVjhXwWHYKeuPIL0 yeFwr6YcS9QZs3Qh9OK4ARczD7cUqTTGQWovQPcEzfgVwbjuAoz3PNUg+y6zmSBi bCR58cgMq5OOpWv9MquvNY+lNT3asXKupSRze53p8i+AviDTMo61kAKbBkZgFF2U fAFGwlnMjaYt9/Ha5bjQTmD9KO8W7R7RKYXhEejxwWC+etdIJuK66sSuwlDg2LLd 5ua1at5vou0XNStqTANR2o058xC8u9/a11NDPVS3aPEEyK7F0gg= =5iZX -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v5.18' of https://github.com/Xilinx/linux-xlnx into arm/dt arm64: dts: ZynqMP DT changes for v5.18 - Dropping #stream-id-cells - Add missing dma-cells and change dma node names * tag 'zynqmp-dt-for-v5.18' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Rename dma to dma-controller arm64: zynqmp: Add missing #dma-cells property arm64: xilinx: dts: drop legacy property #stream-id-cells Link: https://lore.kernel.org/r/19464dc6-eca9-f9a7-8aba-43af094d7c37@xilinx.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Robert Foss
|
d3258737af
|
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
This reverts commit
|
||
|
Arnd Bergmann
|
537c3757b4 |
arm64: tegra: Device tree fixes for v5.17
This contains a single, last-minute fix to disable the display SMMU by default because under some circumstances leaving it enabled by default can cause SMMU faults on boot. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmImSxQTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVELD/9exQGVRakSmrp/kcySASsJa9El8Tkh 9rOnmP/+E+V7531G6Nkzhntb5gEnvFRMr36sCJMkyd6J7v7mGKR2/JpgOLH5cIJx odbN9F68PpVtgG3JUCy8vOl6+5bg7uxTcNaArBRjzghO5Y/vvliL/k647I3mwVfy 6Q3B3Qiq0mMqbxBo5DZDAnElR34Npnmus4LQqSd0P+tEb7LwahfbiRC8mF3YlbEl p3njS5CJbx8mbXMY2hpM0e7CnVJeFy5i8On4IEdSset3/wR6DuUsbFjyXQPCdX4y dV0JxDpkAi3lc48tS3h/wM+pCHLR5OSByjGa0qLTLfZUHqEAHLv07GMgDOisBsZw gDZZHi7na3gOoDDzTFKM8HoHiFssrQSr9Q/DjJoRYVIOssq1aTn5+JNDuD4eJRiB ukANMZinXuqlmCu/jD+Pm+uOK3zvwvlACPj8BQvF/a51DhczfwEIuilbCC2APAR4 Nl4By38Ee5TNH8X+7zc1x+hX7TvWZWkC/KnOH5Re32rs0b2Wg0lis2gjlDYodgDO 0Ca549fnqHxuC5LHyiUxHJcK5v0i47AtkWpP5Dy4skpbL70GKpJpZvTzWd5CmsyH UnmGQxACcMCylabC7patqwLrQGSQWiXgA+zJpTp+2lrGNVMMl77jXqukHkmRa2xD VCAR/jFPpAKmgQ== =9uGD -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmImhf4ACgkQmmx57+YA GNlLDhAAwYqtpHFMYBg0HPOwIkPUX9WhAK2WtG83rd5YY8Y5jPZxmCbJyDxveIt4 eQ+6DYtZG+FnZ/0CIKN6XUWENzXJl9fjB40dLXX53TbCxf2llrfr3zZgY8p8sHHP Kxo2vU79mxmLvZcV9lkp5yNd7Co+Rxoe+KJMMGcvvjWNZZ5lgX9J44+ahmNA7M49 KhV8zMzLHC8FuoeZyQV1AxIXEalPLU34aGrRpBmuEbhv86Gb4MFw5V/5LmLO5jFp ApWlAiMBM78FqCpvd1/cJs37ckmy8lDnOI/RNM5Ye+2PjIDyC7fC0Pd2N4Odvx2V VXLVKJ/+4YlXsIMnqh5qHJJr7f3QNFAv2WQDnSitBtyKFLy9IcVmhArDJBLHpXVY 2lPZthcGvawoQJuVYItYTkbBfQkeYisXzZICvEwSZwfb8SK7ZdvvzzOvq2YSg5KR 5XUEuWhYcaFe+Be/LcCJ5PVUfhnlbmvFtK4TpBq/TA3/QjAEdHIsvHR+Q8wMnMoL qfgx2bTpZiuI6ymmvQyVy8G+8sg3IbRO9CooDLoBQdaQSoh8jzAgSiER70fETf08 7TdsjsWJpkmXgr4UyuXmsHQG/tf/P8dn+53fWe9r5ELxbHOeSHwMaLaqnWm40Iii FN9KIDQYSMRgvnGapL7iRYv6CMxCJbBc6/Lztj9EU6xGVxlRckg= =qW8w -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.17-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.17 This contains a single, last-minute fix to disable the display SMMU by default because under some circumstances leaving it enabled by default can cause SMMU faults on boot. * tag 'tegra-for-5.17-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Disable ISO SMMU for Tegra194 Link: https://lore.kernel.org/r/20220307182120.2169598-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Kuldeep Singh
|
66435063c5 |
arm64: dts: stingray: Fix spi clock name
SPI clock name for pl022 is "sspclk" and not "spiclk". Also fix below dtc warning: clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk'] Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
|
Kuldeep Singh
|
bb8555fe87 |
arm64: dts: ns2: Fix spi clock name
SPI clock name for pl022 is "sspclk" and not "spiclk". Also fix below dtc warning: clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk'] Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
Chris Morgan
|
9d25aadd55 |
arm64: dts: rockchip: Add #clock-cells value for rk805
Based on a brief discussion on the mailing list it was determined that clock-cells should be a required parameter in the event that a consumer of the clock gets added in an overlay. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220303203958.4904-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Chris Morgan
|
079d76ab30 |
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
The Rockchip rk808 Power Management IC does not have a vcc13 or a vcc14. The schematics for at least the Pinebook Pro suggest this is actually vcc1 and vcc2, and may be an artifact from the reference design schematic). Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220303203958.4904-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Rob Herring
|
37cbd3c522 |
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
A label reference without brackets is a path string, not a phandle as
intended. Add the missing brackets.
Fixes:
|
||
Horatiu Vultur
|
6015fb905d |
dts: sparx5: Enable ptp interrupt
Add support for ptp interrupt. This interrupt is used when using 2-step timestamping. For each timestamp that is added in a queue, an interrupt is generated. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> |