IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
Cc: Tvrtko Ursulin <tvrto.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201100032.1367589-1-luciano.coelho@intel.com
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
soc_gpio_set_value() already uses devm_gpiod_get(), lets be consistent
and use devm_gpiod_get() for all GPIOs.
This allows removing the intel_dsi_vbt_gpio_cleanup() function,
which only function was to put the GPIO-descriptors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201161130.23976-1-hdegoede@redhat.com
We are preparing for Xe driver. Backing object implementation is differing
between i915 and Xe. Split i915 specific code into separate source file
built only for i915.
v9:
- Use ERR_CAST
v8:
- return original error code from intel_fb_bo_lookup_valid_bo on failure
v7:
- drop #include <drm/drm_plane.h>
- s/user_mode_cmd/mode_cmd/
- Use passed i915 pointer instead of to_i915(obj->base.dev)
v6: Add missing intel_fb_bo.[ch]
v5:
- Keep drm_any_plane_has_format check in intel_fb.c
- Use mode_cmd instead of user_mode_cmd for intel_fb_bo_lookup_valid_bo
v4: Move drm_any_plane_has_format check into intel_fb_bo.c
v3: Fix failure handling in intel_framebuffer_init
v2: Couple of fixes to error value handling
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114840.841311-5-jouni.hogander@intel.com
Lookup_modifier is returning INTEL_PLANE_CAP_TILING_4 on invalid
fb_modifier value. Use lookup_modifier_or_null in
intel_fb_modifier_to_tiling and return I915_TILING_NONE in case
lookup_modifier_or_null returns null.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114840.841311-4-jouni.hogander@intel.com
We are preparing for Xe driver. I915 and Xe object implementation are
differing. Do not use i915_gem_object->base directly. Instead use
intel_bo_to_drm_bo.
Also use drm_gem_object_put instead of i915_gem_object_put. This should be
ok as i915_gem_object_put is really just doing __drm_gem_object_put.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114840.841311-2-jouni.hogander@intel.com
We are preparing for Xe driver. I915 and Xe object implementation are
differing. Do not use i915_gem_object->base directly. Instead use
intel_bo_to_drm_bo.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115090719.3210079-3-jouni.hogander@intel.com
Split out code from intel_fbdev that can not be share between i915 and
xe. Create new i915 specific source/header file intel_fbdev_fb.[ch] which
contains this code.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115090719.3210079-2-jouni.hogander@intel.com
With TBT-ALT mode we are not programming C20 chip PLL's and
hence we don't need to check state verification. We don't
need to program DP link signal levels i.e.pre-emphasis and
voltage swing either.
This patch fixes dmesg errors like this one
"[drm] ERROR PHY F Write 0c06 failed after 3 retries."
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231129122221.1109084-1-mika.kahola@intel.com
DDC pin mapping for DGFX cards uses direct VBT pin mapping
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128190329.1335562-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
WAs 14011508470, 14011503030 were applied on IP versions beyond which
they are applicable. Fixed the IP version checks for these workarounds.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128102451.825242-1-balasubramani.vivekanandan@intel.com
Current, the dewake_scanline variable is defined as unsigned int,
an unsigned int variable that is always greater than or equal to 0.
when _intel_dsb_commit function is called by intel_dsb_commit function,
the dewake_scanline variable may have an int value.
So the dewake_scanline variable is necessary to defined as an int.
Fixes: f83b94d23770 ("drm/i915/dsb: Use DEwake to combat PkgC latency")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: heminhong <heminhong@kylinos.cn>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have no bigjoiner support in the MST code, so .mode_valid()
pretending otherwise is just going to result black screens for
users. Reject any mode that needs the joiner.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently no one can figure out what the PSR code is doing since
we're including any of it in the basic state dump. Add at least the
bare minimum there.
v2: Also dump has_panel_replay (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124082735.25470-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
In earlier versions, FBC was restricted if PSR2 is enabled. From
xe2lpd onwards no such restrictions are needed anymore.
HSD: 14014305387
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110093225.39573-2-vinod.govindapillai@intel.com
Currently we are enabling selective fetch for all planes that are visible.
This is suboptimal as we might be fetching for memory for planes that are
not part of selective update.
Fix this by adding proper handling for disabling plane selective fetch:
If plane previously part of selective update is now not part of update:
Add it into updated planes and let the plane configuration to disable
selective fetch for it.
v3: Checkpatch warnings fixed
v2:
- Add setting sel_fetch_area->y1/y2 to -1
- Remove setting again local sel_fetch_area variable
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-3-jouni.hogander@intel.com
Currently selective fetch configuration for planes is implemented in psr
code. More suitable place for this code is where everything else is
configured for planes -> move it into skl_universal_plane.c and
intel_cursor.c. This also allows us to drop hooks for cursor handling.
v3: Checkpatch warnings fixed
v2: Removed setting sel_fetch_area->y1/y2 as -1
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-2-jouni.hogander@intel.com
The current implementation of change_lut_val_precision() is just
a convoluted way of shifting by 8. Implement the proper rounding
by just using drm_color_lut_extract() and intel_color_lut_pack()
like everyone else does.
And as the uapi can't handle >=1.0 values but the hardware
can we need to clamp the results appropriately in the readout
path.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-5-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
drm_color_lut_extract() rounding was changed to follow the
OpenGL int<->float conversion rules. Adjust intel_color_lut_pack()
to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-3-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current implementation of drm_color_lut_extract()
generates weird results. Eg. if we go through all the
values for 16->8bpc conversion we see the following pattern:
in out (count)
0 - 7f -> 0 (128)
80 - 17f -> 1 (256)
180 - 27f -> 2 (256)
280 - 37f -> 3 (256)
...
fb80 - fc7f -> fc (256)
fc80 - fd7f -> fd (256)
fd80 - fe7f -> fe (256)
fe80 - ffff -> ff (384)
So less values map to 0 and more values map 0xff, which
doesn't seem particularly great.
To get just the same number of input values to map to
the same output values we'd just need to drop the rounding
entrirely. But perhaps a better idea would be to follow the
OpenGL int<->float conversion rules, in which case we get
the following results:
in out (count)
0 - 80 -> 0 (129)
81 - 181 -> 1 (257)
182 - 282 -> 2 (257)
283 - 383 -> 3 (257)
...
fc7c - fd7c -> fc (257)
fd7d - fe7d -> fd (257)
fe7e - ff7e -> fe (257)
ff7f - ffff -> ff (129)
Note that since the divisor is constant the compiler
is able to optimize away the integer division in most
cases. The only exception is the _ULL() case on 32bit
architectures since that gets emitted as inline asm
via do_div() and thus the compiler doesn't get to
optimize it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-2-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
We are preparing for Xe driver. I915 and Xe object implementation are
differing. Use intel_bo_to_drm_bo instead of &obj->base.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-3-juhapekka.heikkila@gmail.com
There's no real reason why we'd need a full modeset for audio
changes. So let's allow audio to be toggled during fastset.
In case the ELD changes while has_audio isn't changing state
we force both audio disable and enable so the new ELD gets
propagated to the audio driver.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-12-ville.syrjala@linux.intel.com
Add encoder vfuncs for audio enable/disable. This will allow
audio to be enabled/disabled during fastsets. An encoder hook
is necessary as on pre-hsw platforms different encoder types
implement audio in different ways.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-9-ville.syrjala@linux.intel.com
Follow the hsw+ approach toggle the audio presence detect
when we set up the ELD, instead of doing it when turning the
port on/off.
This will facilitate audio enable/disable to happen during
fastsets instead of requiring a full modeset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-8-ville.syrjala@linux.intel.com
Follow the hsw+ approach toggle the audio presence detect
when we set up the ELD, instead of doing it when turning the
port on/off.
This will facilitate audio enable/disable to happen during
fastsets instead of requiring a full modeset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-7-ville.syrjala@linux.intel.com
Push the audio enable/disable to be the last/first thing
respectively that is done in the encoder enable/disable hooks.
The goal is to move it further out of these encoder hooks entirely.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-5-ville.syrjala@linux.intel.com
We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.
Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
