IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
phy_init() and phy_exit() will have to do more stuff under rtnl_lock()
in a future change. Since rtnl_unlock() -> netdev_run_todo() does a lot
of stuff under the hood, it's a pity to lock and unlock the rtnetlink
mutex twice in a row.
Change the calling convention such that the only caller of
ethtool_set_ethtool_phy_ops(), phy_device.c, provides a context where
the rtnl_mutex is already acquired.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware timestamping through ndo_eth_ioctl() is going away.
Convert the lan966x driver to the new API before that can be removed.
After removing the timestamping logic from lan966x_port_ioctl(), the
rest is equivalent to phy_do_ioctl().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware timestamping through ndo_eth_ioctl() is going away.
Convert the sparx5 driver to the new API before that can be removed.
After removing the timestamping logic from sparx5_port_ioctl(), the rest
is equivalent to phy_do_ioctl().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 340746398b67 ("net: fec: fix hardware time stamping by external
devices") was overly cautious with calling fec_ptp_disable_hwts() when
cmd == SIOCSHWTSTAMP and use_fec_hwts == false, because use_fec_hwts is
based on a runtime invariant (phy_has_hwtstamp()). Thus, if use_fec_hwts
is false, then fep->hwts_tx_en and fep->hwts_rx_en cannot be changed at
runtime; their values depend on the initial memory allocation, which
already sets them to zeroes.
If the core will ever gain support for switching timestamping layers,
it will arrange for a more organized calling convention and disable
timestamping in the previous layer as a first step. This means that the
code in the FEC driver is not necessary in any case.
The purpose of this change is to arrange the phy_has_hwtstamp() code in
a way in which it can be refactored away into generic logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware timestamping through ndo_eth_ioctl() is going away.
Convert the FEC driver to the new API before that can be removed.
After removing the timestamping logic from fec_enet_ioctl(), the rest
is equivalent to phy_do_ioctl_running().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bonding is one of the stackable net devices which pass the hardware
timestamping ops to the real device through ndo_eth_ioctl(). This
prevents converting any device driver to the new hwtimestamping API
without regressions.
Remove that limitation in bonding by using the newly introduced helpers
for timestamping through lower devices, that handle both the new and the
old driver API.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macvlan is one of the stackable net devices which pass the hardware
timestamping ops to the real device through ndo_eth_ioctl(). This
prevents converting any device driver to the new hwtimestamping API
without regressions.
Remove that limitation in macvlan by using the newly introduced helpers
for timestamping through lower devices, that handle both the new and the
old driver API.
macvlan only implements ndo_eth_ioctl() for these 2 operations, so
delete that method.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
8021q is one of the stackable net devices which pass the hardware
timestamping ops to the real device through ndo_eth_ioctl(). This
prevents converting any device driver to the new hwtimestamping API
without regressions.
Remove that limitation in the vlan driver by using the newly introduced
helpers for timestamping through lower devices, that handle both the new
and the old driver API.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stackable net devices with hwtstamping support (vlan, macvlan,
bonding) only pass the hwtstamping ops to the lower (real) device.
These drivers are the first that need to be converted to the new
timestamping API, because if they aren't prepared to handle that,
then no real device driver cannot be converted to the new API either.
After studying what vlan_dev_ioctl(), macvlan_eth_ioctl() and
bond_eth_ioctl() have in common, here we propose two generic
implementations of ndo_hwtstamp_get() and ndo_hwtstamp_set() which
can be called by those 3 drivers, with "dev" being their lower device.
These helpers cover both cases, when the lower driver is converted to
the new API or unconverted.
We need some hacks in case of an unconverted driver, namely to stuff
some pointers in struct kernel_hwtstamp_config which shouldn't have
been there (since the new API isn't supposed to need it). These will
be removed when all drivers will have been converted to the new API.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current hardware timestamping API for NICs requires implementing
.ndo_eth_ioctl() for SIOCGHWTSTAMP and SIOCSHWTSTAMP.
That API has some boilerplate such as request parameter translation
between user and kernel address spaces, handling possible translation
failures correctly, etc. Since it is the same all across the board, it
would be desirable to handle it through generic code.
Here we introduce .ndo_hwtstamp_get() and .ndo_hwtstamp_set(), which
implement that boilerplate and allow drivers to just act upon requests.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: extend alloc_skb_with_frags() max size
alloc_skb_with_frags(), while being able to use high order allocations,
limits the payload size to PAGE_SIZE * MAX_SKB_FRAGS
Reviewing Tahsin Erdogan patch [1], it was clear to me we need
to remove this limitation.
[1] https://lore.kernel.org/netdev/20230731230736.109216-1-trdgn@amazon.com/
v2: Addressed Willem feedback on 1st patch.
====================
Link: https://lore.kernel.org/r/20230801205254.400094-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tap_alloc_skb() is currently calling sock_alloc_send_pskb()
forcing order-0 page allocations.
Switch to PAGE_ALLOC_COSTLY_ORDER, to increase max size by 8x.
Also add logic to increase the linear part if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tahsin Erdogan <trdgn@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230801205254.400094-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packet_alloc_skb() is currently calling sock_alloc_send_pskb()
forcing order-0 page allocations.
Switch to PAGE_ALLOC_COSTLY_ORDER, to increase max size by 8x.
Also add logic to increase the linear part if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tahsin Erdogan <trdgn@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230801205254.400094-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tun_alloc_skb() is currently calling sock_alloc_send_pskb()
forcing order-0 page allocations.
Switch to PAGE_ALLOC_COSTLY_ORDER, to increase max allocation size by 8x.
Also add logic to increase the linear part if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tahsin Erdogan <trdgn@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230801205254.400094-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These declarations are never implemented since beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230731141030.32772-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Leon Romanovsky says:
====================
mlx5 IPsec packet offload support in eswitch mode
This series from Jianbo adds mlx5 IPsec packet offload support in eswitch
offloaded mode.
It works exactly like "regular" IPsec, nothing special, except
now users can switch to switchdev before adding IPsec rules.
devlink dev eswitch set pci/0000:06:00.0 mode switchdev
Same configurations as here:
https://lore.kernel.org/netdev/cover.1670005543.git.leonro@nvidia.com/
Packet offload mode:
ip xfrm state offload packet dev <if-name> dir <in|out>
ip xfrm policy .... offload packet dev <if-name>
Crypto offload mode:
ip xfrm state offload crypto dev <if-name> dir <in|out>
or (backward compatibility)
ip xfrm state offload dev <if-name> dir <in|out>
v0: https://lore.kernel.org/all/cover.1689064922.git.leonro@nvidia.com
====================
Link: https://lore.kernel.org/r/cover.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For IPsec packet offload mode, the order of TC offload and IPsec
offload on the same netdevice is not aligned with the order in the
non-offload software. For example, for RX, the software performs TC
first and then IPsec transformation, but the implementation for
offload does that in the opposite way.
To resolve the difference for now, either IPsec offload or TC offload,
not both, is allowed for a specific interface.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/8e2e5e3b0984d785066e8663aaf97b3ba1bb873f.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After IPsec policy/state TX rules are added, any TC flow rule, which
forwards packets to uplink, is modified to forward to IPsec TX tables.
As these tables are destroyed dynamically, whenever there is no
reference to them, the destinations of this kind of rules must be
restored to uplink.
There is a special case for packet encapsulation, as the
packet_reformat_id in the extended destination is used to reformat
packets, but only for the VPORT destination. To forward packet to
IPsec table and do encapsulation in one FTE, move the
packet_reformat_id to flow context, instead of using the extended
destination. As a limitation, multiple encapsulations with table
forwarding, and one together with other VPORT destinations, are not
allowed, so add a check when offloading TC rules.
TC rules are not allowed before IPsec TX rule is added, so only need
to restore TC rules after flush IPSec TX rules. As they are saved in
the vport_rep rhashtables, we walk all the rules in the rhashtables,
and find TC rules with destinations pointing to IPsec tables, and
modify them one by one. To avoid concurrent issue, this handling is
done under the protection of eswitch mode_lock.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7bcb2c7e2ecf0e0d06b095c8dcc6a37ea7f02faf.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The eswitch mode is not allowed to change if there are any IPsec rules.
Besides, by using mlx5_esw_try_lock() to get eswitch mode lock, IPsec
rules are not allowed to be offloaded if there are any TC rules.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/e442b512b21a931fbdfb87d57ae428c37badd58a.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPsec encryption is done at the last, so add new prio for IPsec
offload in FDB, and put it just lower than the slow path prio and
higher than the per-vport prio.
Three levels are added for TX. The first one is for ip xfrm policy.
The sa table is created in the second level for ip xfrm state. The
status table is created at the last to count the number of packets
encrypted.
The rules, which forward packets to uplink, are changed to forward
them to IPsec TX tables first. These rules are restored after those
tables are destroyed, which is done immediately when there is no
reference to them, just as what does in legacy mode. The support for
slow path is added here, by refreshing uplink's channels. But, the
handling for TC fast path, which is more complicated, will be added
later. Besides, reg c4 is used instead to match reqid.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/cfd0e6ffaf0b8c55ebaa9fb0649b7c504b6b8ec6.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add attribute for IPsec TX creation, pass all needed parameters in it,
so tx_create() can be used by eswitch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/24d5ab988b0db2d39b7fde321b44ffe885d47828.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reuse tun opts bits in reg c1, to pass IPsec obj id to datapath.
As this is only for RX SA and there are only 11 bits, xarray is used
to map IPsec obj id to an index, which is between 1 and 0x7ff, and
replace obj id to write to reg c1.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/43d60fbcc9cd672a97d7e2a2f7fe6a3d9e9a776d.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As decryption must be done first, add new prio for IPsec offload in
FDB, and put it just lower than BYPASS prio and higher than TC prio.
Three levels are added for RX. The first one is for ip xfrm policy. SA
table is created in the second level for ip xfrm state. The status
table is created in the last to check the decryption result. If
success, packets continue with the next process, or dropped otherwise.
For now, the set of reg c1 is removed for swtichdev mode, and the
datapath process will be added in the next patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/c91063554cf643fb50b99cf093e8a9bf11729de5.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add attribute for IPsec RX creation, so rx_create() can be used by
eswitch in later patch. And move the code for TTC dest
connect/disconnect, which are needed only in NIC mode, to individual
functions.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/87478d928479b6a4eee41901204546ea05741815.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the uplink representor is created only in switchdev mode, add a local
variable for IPsec to indicate the device is in this mode.
In this mode, IPsec ROCE is disabled, and crypto offload is kept
as it is. However, as the tables for packet offload are created in FDB,
ipsec->rx_esw and ipsec->tx_esw are added.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ee242398f3b0a18007749fe79ff6ff19445a0280.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add function to get namespace in different directions. It will be
extended for switchdev mode in later patch, but no functionality change
for now.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ac2982c34f1ed3288d4670cacfd7e1b87a8c96d9.1690802064.git.leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The documentation above pds_client_register states that it returns 0 on
success and negative on error. However, it actually returns a positive
client ID on success and negative on error. Fix the documentation to
state exactly that.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230801165833.1622-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit b1edeb102397 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
this declaration is unused and can be removed.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20230801143453.24452-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.
And there is no need to call the dev_warn() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230801133121.416319-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace bogus comment about matching the latched timestamp to one of the
received frames. That comment is probably copied from mv88e6xxx and true for
these switches. However, the hellcreek switch is configured to insert the
timestamp directly into the PTP packets.
While here, remove the other comments regarding the list splicing and locking as
well, because it doesn't add any value.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230801131647.84697-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801111928.300231-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics. So remove it
to clean Code.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230801112638.317149-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.
And there is no need to call the netdev_err() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230731073858.3633193-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
./drivers/net/ethernet/freescale/fman/mac.c: linux/of_platform.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6039
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_mmap tests TCP_ZEROCOPY_RECEIVE. If 0% of data is received using
mmap, this may be due to mss. Report rcv_mss to identify this cause.
Output of a run failed due to too small mss:
received 32768 MB (0 % mmap'ed) in 8.40458 s, 32.7057 Gbit
cpu usage user:0.027922 sys:8.21126, 251.44 usec per MB, 3252 c-switches, rcv_mss 1428
Output on a successful run:
received 32768 MB (99.9507 % mmap'ed) in 4.69023 s, 58.6064 Gbit
cpu usage user:0.029172 sys:2.56105, 79.0473 usec per MB, 57591 c-switches, rcv_mss 4096
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MD Danish Anwar says:
====================
Introduce ICSSG based ethernet Driver
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like the implementation
of custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.
The subsystem includes many accelerators for data processing like
multiplier and multiplier-accumulator. It also has peripherals like
UART, MII/RGMII, MDIO, etc. Every ICSSG core includes two 32-bit
load/store RISC CPU cores called PRUs.
The above features allow it to be used for implementing custom firmware
based peripherals like ethernet.
This series adds the YAML documentation and the driver with basic EMAC
support for TI AM654 Silicon Rev 2 SoC with the PRU_ICSSG Sub-system.
running dual-EMAC firmware.
This currently supports basic EMAC with 1Gbps and 100Mbps link. 10M and
half-duplex modes are not yet supported because they require the support
of an IEP, which will be added later.
Advanced features like switch-dev and timestamping will be added later.
This is the v13 of the patch series [v1]. This version of the patchset
addresses comments made on v12.
There series doesn't have any dependency.
Changes from v12 to v13 :
*) Rebased the series on latest net-next.
*) Addressed Jakub's comments on ndo_xmit API. Now we will only stop queues
based on occupancy not on dma errors.
*) Removed limiting the number of serviced packets to budget for Tx NAPI.
Now Tx NAPI will keep servicing packets.
*) Removed netif_running() check when packet arrives.
*) Introduced prototypes of APIs in the same patch where these APIs are added.
Dropped __maybe_unused tags as compiler only cares about prototypes
existing, not whether actual callers are in place. Now prototypes of these
APIs are present in the same patch where they are introduced but thes APIs
are called later (in patch 6).
Changes from v11 to v12 :
*) Rebased the series on latest net-next.
*) Addressed Jakub's comments on ndo_xmit API.
*) Added hooks to .get_rmon_stats for the driver. Now tx / rx bucket size
and frame counts per bucket will be fetched by ethtool_rmon_stats instead
of ethtool -S.
*) Added __maybe_unused tags to unused config and classifier APIs in patch
2,3 and 4. These tags are later removed in patch 6.
Changes from v10 to v11 :
*) Rebased the series on latest net-next.
*) Split the ICSSG driver introduction patch into 9 different patches as
asked by Jakub.
*) Introduced new patch(patch 8/10) to dump Standard network interface
staticstics via ndo_get_stats64. Now certain stats that are reported by
ICSSG hardware and are also part of struct rtnl_link_stats64, will be
reported by ndo_get_stats64. While other stats that are not part of the
struct rtnl_link_stats64 will be reported by ethtool -S. These stats
are not duplicated.
Changes from v9 to v10 :
*) Rebased the series on latest net-next.
*) Moved 'ndev prueth->emac[mac] == emac' assignment to the end of function
prueth_netdev_init().
*) In unsupported phy_mode switch case instead of returning -EINVAL, store
the error code in ret and 'goto free'
Changes from v8 to v9 :
*) Rebased the series on latest net-next.
*) Fixed smatch and sparse warnings as pointed by Simon.
*) Fixed leaky ndev in prueth_netdev_init() as asked by Simon.
Changes from v7 to v8 :
*) Rebased the series on 6.5-rc1.
*) Fixed few formattings.
Changes from v6 to v7 :
*) Added RB tag of Rob in patch 1 of this series.
*) Addressed Simon's comment on patch 2 of the series.
*) Rebased patchset on next-20230428 linux-next.
Changes from v5 to v6 :
*) Added RB tag of Andrew Lunn in patch 2 of this series.
*) Addressed Rob's comment on patch 1 of the series.
*) Rebased patchset on next-20230421 linux-next.
Changes from v4 to v5 :
*) Re-arranged properties section in ti,icssg-prueth.yaml file.
*) Added requirement for minimum one ethernet port.
*) Fixed some minor formatting errors as asked by Krzysztof.
*) Dropped SGMII mode from enum mii_mode as SGMII mode is not currently
supported by the driver.
*) Added switch-case block to handle different phy modes by ICSSG driver.
Changes from v3 to v4 :
*) Addressed Krzysztof's comments and fixed dt_binding_check errors in
patch 1/2.
*) Added interrupt-extended property in ethernet-ports properties section.
*) Fixed comments in file icssg_switch_map.h according to the Linux coding
style in patch 2/2. Added Documentation of structures in patch 2/2.
Changes from v2 to v3 :
*) Addressed Rob and Krzysztof's comments on patch 1 of this series.
Fixed indentation. Removed description and pinctrl section from
ti,icssg-prueth.yaml file.
*) Addressed Krzysztof, Paolo, Randy, Andrew and Christophe's comments on
patch 2 of this seires.
*) Fixed blanklines in Kconfig and Makefile. Changed structures to const
as suggested by Krzysztof.
*) Fixed while loop logic in emac_tx_complete_packets() API as suggested
by Paolo. Previously in the loop's last iteration 'budget' was 0 and
napi_consume_skb would wrongly assume the caller is not in NAPI context
Now, budget won't be zero in last iteration of loop.
*) Removed inline functions addr_to_da1() and addr_to_da0() as asked by
Andrew.
*) Added dev_err_probe() instead of dev_err() as suggested by Christophe.
*) In ti,icssg-prueth.yaml file, in the patternProperties section of
ethernet-ports, kept the port name as "port" instead of "ethernet-port"
as all other drivers were using "port". Will change it if is compulsory
to use "ethernet-port".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add suspend / resume APIs to support power management in ICSSG ethernet
driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add icssg_ethtool.c file. This file will be used for dumping statistics
via ethtool for ICSSG ethernet driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement .ndo_get_stats64 to dump standard network interface
statistics for ICSSG ethernet driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add icssg_stats.c to help dump, icssg related driver statistics.
ICSSG has hardware registers for providing statistics like total rx bytes,
total tx bytes, etc. These registers are of 32 bits and hence in case of 1G
link, they overflows in around 32 seconds. The behaviour of these registers
is such that they don't roll back to 0 after overflow but rather stay at
UINT_MAX.
These registers support a feature where the value written to them is
subtracted from the register. This feature can be utilized to fix the
overflowing of stats.
This solution uses a Workqueues based solution where a function gets
called before the registers overflow (every 25 seconds in 1G link, 25000
seconds in 100M link), this function saves the register
values in local variables and writes the last read value to the
register. So any update during the read will be taken care of.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the Ethernet driver for TI AM654 Silicon rev. 2
with the ICSSG PRU Sub-system running dual-EMAC firmware.
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
SoCs. This subsystem is provided for the use cases like implementation of
custom peripheral interfaces, offloading of tasks from the other
processor cores of the SoC, etc.
Every ICSSG core has two Programmable Real-Time Unit(PRUs),
two auxiliary Real-Time Transfer Unit (RT_PRUs), and
two Transmit Real-Time Transfer Units (TX_PRUs). Each one of these runs
its own firmware. Every ICSSG core has two MII ports connect to these
PRUs and also a MDIO port.
The cores can run different firmwares to support different protocols and
features like switch-dev, timestamping, etc.
It uses System DMA to transfer and receive packets and
shared memory register emulation between the firmware and
driver for control and configuration.
This patch adds support for basic EMAC functionality with 1Gbps
and 100Mbps link speed. 10M and half duplex mode are not supported
currently as they require IEP, the support for which will be added later.
Support for switch-dev, timestamp, etc. will be added later
by subsequent patch series.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a YAML binding document for the ICSSG Programmable real time unit
based Ethernet hardware. The ICSSG driver uses the PRU and PRUSS consumer
APIs to interface the PRUs and load/run the firmware for supporting
ethernet functionality.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add icssg_queue.c file. This file introduces macros and APIs related to
ICSSG queues. These will be used by ICSSG Ethernet driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
