IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
MIPS CPU interrupt controller bindings used text format, so migrate them
to YAML.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921072405.610739-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
SoC MT7621 I2C bindings used text format, so migrate them to YAML.
There are some additions to the binding that were not in the original
txt file. This binding is used in MT7621 and MT7628a Ralink SoCs. To
properly match both dts nodes in tree we need to add to the schema
'clocks', 'clock-names' and 'reset-names'. Both 'clock-names' and
'reset-names' use 'i2c' as string so maintain that as const in
the schema. Also, Properly update MAINTAINERS file to align the
changes.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220920052050.582321-1-sergio.paracuellos@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
i.MX8MQ has pgc 'power-domain@a', so correct patternProperties
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923075427.985504-1-peng.fan@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the binding that describes the virtio-pci based IOMMU to DT
schema. Change the compatible string to "pci<vendor>,<device>", which is
defined by the PCI Bus Binding, but keep "virtio,pci-iommu" as an option
for backward compatibility.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220923074435.420531-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Since the Armv7 and Armv8 architected timers are compatible, it is valid
to expose a devicetree node with compatible string "arm,armv8-timer"
followed by "arm,armv7-timer". For example a 32-bit guest running on a
64-bit machine may look for the v7 string even though the hardware is v8.
VMMs such as QEMU and kvmtool have been using this compatible string for
some time. Clean up the compatible list a little and add the dual
option.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220922161149.371565-1-jean-philippe@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Kryo240 is found in SM4250, the slower sibling of the SM6115.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220919180618.1840194-3-iskren.chernev@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the NXP TDA998x HDMI transmitter Device Tree binding
documentation to json-schema.
Add missing "#sound-dai-cells" property.
Add ports hierarchy, as an alternative to port.
Drop pinctrl properties, as they do not belong here.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1224e757ec958f8b29ec66e783a7ee805c339d84.1663165552.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
U-Boot doesn't have cells at hardcoded addresses. They are stored in
internal format. It's still important to define relevant cells in DT so
NVMEM consumers can reference them.
Update binding to allow including basic cells as NVMEM device subnodes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/r/20220703084843.21922-1-zajec5@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The smd-edge child node references respective schema which allows
additional properties, so the ADSP needs to further restrict them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906121358.302894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-10-robh@kernel.org
syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220817142246.828762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
syscon and simple-mfd cannot be used without device specific compatible,
so simplify the example to fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220817142246.828762-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add memory-region property to the list of optional properties, specify
the value type and a definition. This property is used to specify the
memory region which should be used for remote heap CMA.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909133938.3518520-4-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
SMD edge contains subnodes representing devices related to the remote
processor. With limietd number of remote processors, there is a limited
set of such devices.
List all of them in smd-edge bindings so schema can strictly check for
subnodes.
Additional benefit is requirement of "qcom,smd-channels" for such
subnodes, because their schema cannot enforce it (few devices like APR
or FastRPC can be part of either SMD or GLINK edge).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
GLINK edge contains subnodes representing devices related to the remote
processor. Each of such device (e.g. APR or FastRPC) must have
a "qcom,glink-channels" property. However the APR or FastRPC device can
be also part of other communication - SMD - thus their schema does not
require "qcom,glink-channels".
To make the GLINK edge bindings strict, require "qcom,glink-channels"
for its children.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The parent of FastRPC node is GLINK edge, so the properties should be
matching GLINK, not SMD. Correct the example and extend it based on
SM8350.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220909125403.803158-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
If the properties 'linux,initrd-start' and 'linux,initrd-end' of
the chosen node populated from the bootloader, eg. U-Boot, are so that
start > end, then the phys_initrd_size calculated from end - start is
negative that subsequently gets converted to a high positive value for
being unsigned long long. Then, the memory region with the (invalid)
size is added to the bootmem and attempted being paged in paging_init()
that results in the kernel fault.
For example, on the FVP ARM64 system I'm running, the U-Boot populates
the 'linux,initrd-start' with 8800_0000 and 'linux,initrd-end' with 0.
The phys_initrd_size calculated is then ffff_ffff_7800_0000
(= 0 - 8800_0000 = -8800_0000 + ULLONG_MAX + 1). paging_init() then
attempts to map the address 8800_0000 + ffff_ffff_7800_0000 and oops'es
as below.
It should be stressed, it is generally a fault of the bootloader's with
the kernel relying on it, however we should not allow the bootloader's
misconfiguration to lead to the kernel oops. Not only the kernel should be
bullet proof against it but also finding the root cause of the paging
fault spanning over the bootloader, DT, and kernel may happen is not so
easy.
Unable to handle kernel paging request at virtual address fffffffefe43c000
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000007
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[fffffffefe43c000] pgd=0000000080de9003, pud=0000000080de9003
Unable to handle kernel paging request at virtual address ffffff8000de9f90
Mem abort info:
ESR = 0x96000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080e3d000
[ffffff8000de9f90] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.51-yocto-standard #1
Hardware name: FVP Base (DT)
pstate: 60000085 (nZCv daIf -PAN -UAO)
pc : show_pte+0x12c/0x1b4
lr : show_pte+0x100/0x1b4
sp : ffffffc010ce3b30
x29: ffffffc010ce3b30 x28: ffffffc010ceed80
x27: fffffffefe43c000 x26: fffffffefe43a028
x25: 0000000080bf0000 x24: 0000000000000025
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x23: ffffffc010b8d000 x22: ffffffc010e3d000
x21: 0000000080de9000 x20: ffffff7f80000f90
x19: fffffffefe43c000 x18: 0000000000000030
x17: 0000000000001400 x16: 0000000000001c00
x15: ffffffc010cef1b8 x14: ffffffffffffffff
x13: ffffffc010df1f40 x12: ffffffc010df1b70
x11: ffffffc010ce3b30 x10: ffffffc010ce3b30
x9 : 00000000ffffffc8 x8 : 0000000000000000
x7 : 000000000000000f x6 : ffffffc010df16e8
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 00000000ffffffff x2 : 0000000000000000
x1 : 0000008080000000 x0 : ffffffc010af1d68
Call trace:
show_pte+0x12c/0x1b4
die_kernel_fault+0x54/0x78
__do_kernel_fault+0x11c/0x128
do_translation_fault+0x58/0xac
do_mem_abort+0x50/0xb0
el1_da+0x1c/0x90
__create_pgd_mapping+0x348/0x598
paging_init+0x3f0/0x70d0
setup_arch+0x2c0/0x5d4
start_kernel+0x94/0x49c
Code: 92748eb5 900052a0 9135a000 cb010294 (f8756a96)
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Link: https://lore.kernel.org/r/20220909023358.76881-1-marek.bykowski@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
For K3 devices the clock fed into the RNG module is shared with the rest
of the Crypto module, it is not dedicated to the RNG module and cannot be
controlled by the RNG driver. The driver does not require this clock to
always be defined and the DT binding should not force it either.
Remove this so we can start dropping out the clock properties as needed.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20220901171041.32056-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
New pr_err(), a copy of preceeding pr_debug(), faciliates debugging.
This change was inspired by a long lasting debugging of the
octeon_irq_init_ciu() which fails completely silently and leaves the
interrupt controller half-way configured which in turn had very non-obvious
effects.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Link: https://lore.kernel.org/r/20220907121629.54330-1-alexander.sverdlin@nokia.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Qualcomm FastRPC bindings to yaml format, so that we could validate
dt-entries correctly and any future additions can go into yaml format.
Use compute-cb@ subnodes instead of just cb@. Add qcom,glink-channels and
qcom,smd-channels missing properties to make sure dtbs_check doesn't fail
right off the bat. Correct the name of the parent node in the example from
smd-edge to glink-edge.
Since now the qcom,fastrpc bindings document is yaml, update the
reference to it in qcom,glink-edge and also use $ref.
Also update the MAINTAINERS file to point to the yaml version.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220907074301.3996021-1-abel.vesa@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-16-robh@kernel.org
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-15-robh@kernel.org
crypto driver itself is not dma-coherent. It is the dmaengine
that moves data and the buffers are to be mapped to the
dmaengine provider. So this property should be dropped.
Fixes: 2ce9a7299b ('dt-bindings: crypto: Add TI SA2UL crypto accelerator documentation')
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20220826091142.262325-1-j-choudhary@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
On PM660L, PMI8994 and PMI8998, the WLED has two address spaces. This
also fixes dtbs_check warnings like:
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dtb: leds@d800: reg: [[55296], [55552]] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220825125410.232377-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220825113334.196908-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220825113334.196908-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220825113334.196908-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-3-robh@kernel.org
minItems, if missing, are implicitly equal to maxItems, so drop
redundant piece to reduce size of code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220825113334.196908-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
reg-io-width is a standard property, so no need for defining its type
with $ref.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20220823101031.387082-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-11-robh@kernel.org
DT bindings using the graph binding must have references to the graph
binding schema. These are missing from the adi,adv7511 and adi,adv7533
bindings, so add them.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220823145649.3118479-12-robh@kernel.org
Make OF unittest trigger the new TAINT_TEST taint when OF unittest runs.
Due to OF unittest not being intended to run on production systems, and
potentially causing problems (or security issues like leaking kernel
addresses), the kernel's state should not be considered safe for
production use after OF unittest runs.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20220823200152.3465751-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
It should be valid for a GICv2m node, child of a GICv2 node, to use two
cells per reg address and size. The QEMU virt device-tree currently
fails validation because the schema imposes a single address and size
cell. Amend the rule.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220822152224.507497-4-jean-philippe@linaro.org
A GICv3 implementation without virtualization, such as the base QEMU
virt machine (without -M virtualization=on), does not issue maintenance
interrupts. Therefore its device-tree node does not need an 'interrupts'
property. Currently, validating the QEMU virt device-tree throws a
warning that 'interrupts' is missing. Make it optional.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220822152224.507497-3-jean-philippe@linaro.org
Convert the arm,versatile-sysreg binding to DT schema format.
The original binding was missing 'simple-mfd' and a 'panel' sub node which
the only user (versatile-ab.dts) of this binding has.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220810160341.51995-3-robh@kernel.org
The 'arm,versatile-sysreg' node in the example should not have
'#address-cells' and '#size-cells' properties as the child node doesn't
have 'reg'.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220810160341.51995-2-robh@kernel.org
Simple 'opp-table:true' accepts a boolean property as opp-table, so
restrict it to object to properly enforce real OPP table nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220818061713.9611-1-krzysztof.kozlowski@linaro.org
Simple 'opp-table:true' accepts a boolean property as opp-table, so
restrict it to object to properly enforce real OPP table nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220818061653.9524-1-krzysztof.kozlowski@linaro.org
Simple 'opp-table:true' accepts a boolean property as opp-table, so
restrict it to object to properly enferce real OPP table nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220818061549.9087-1-krzysztof.kozlowski@linaro.org
