IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As it is not a consensus about installing sphinx using venv, and
modern distributions are now shipping with Sphinx versions above
the minimal requirements to build the docs, provide both venv
and package install commands by default.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/7c99d985df204c73e3daafd5fd2f30a31269405d.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
After distro upgrades, the directory names for python may change.
On such case, the previously-created venv will be broken, and
sphinx-build won't run.
Add a logic to report it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/f117f03555b0636d2be0b68f3a23b1d3f03ccf1d.1656756450.git.mchehab@kernel.org
[jc: fixed typo in warning message]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The logic which checks if the venv version is good enough
but was not activated is broken: it is checking against
the wrong val, making it to recommend to re-create a venv
every time. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/afe01b7863fd655986d84ace8948f3d7aede796d.1656756450.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The sphinx-pre-install supports installing sphinx via a virtual
environment using pip/pypi or directly from the distribution's
package, when --no-virtualenv is used.
However, even when --no-virtualenv, the current logic is
still recomending to install a virtual env, due to a regression.
It turns that the logic there is complex, as it depends on
several different conditions.
Split the code which recommends Sphinx on two separate
functions, in order to clean up the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9dedaec201803017b7a7dc24a074f3a4f040b72a.1621949137.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
sphinx-pre-install is picky when it comes to parsing sphinx versions; it
failed when run with sphinx 4.0.0b1. Tweak the regex to tolerate a
trailing "bN" on the version number.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The kernel build system as a whole is dropping support for Python 2, so we
should do the same. The effects are rather small, especially considering
that much of the deleted code was not doing anything under any version of
Python anyway.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Change every shebang which does not need an argument to use /usr/bin/env.
This is needed as not every distro has everything under /usr/bin,
sometimes not even bash.
Signed-off-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The sphinx-pre-install script will put out a verbose message recommending
an upgrade for anybody running less than 2.4.4 - which was only released in
March. So *everybody* will see that warning at this point. Let's only
warn if the user is below our generally recommended version (1.7.9
currently).
It might be good to put out a warning if people are explicitly making PDF
files, but would need to be done in a different place and relatively few
people do that.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When the script detects the need for an upgrade, it will
print either a warning or a note.
Let's change a little bit the order where messages will be
displayed, in order to make easier for the user to identify
the more important messages.
It should now be like this:
Detected OS: Fedora release 31 (Thirty One).
Sphinx version: 1.7.9
Note: It is recommended at least Sphinx version 2.4.4 if you need PDF support.
To upgrade Sphinx, use:
/usr/bin/python3 -m venv sphinx_2.4.4
. sphinx_2.4.4/bin/activate
pip install -r ./Documentation/sphinx/requirements.txt
If you want to exit the virtualenv, you can use:
deactivate
All optional dependencies are met.
Needed package dependencies are met.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20200421182758.04e0a53e@coco.lan
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When python3 creates a venv, it adds python into it!
This causes any upgrade recommendation to look like this:
/devel/v4l/docs/sphinx_1.7.9/bin/python3 -m venv sphinx_2.4.4
. sphinx_2.4.4/bin/activate
pip install -r ./Documentation/sphinx/requirements.txt
With is wrong (and it may not work). So, when recomending
an upgrade, exclude the venv dir from the search path, and
get the system's python.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/aa622ff71bebf6960fc0262fb90e7ebc7a999a02.1587478901.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If one is running a Sphinx version older than what's recommended,
but there's already a newer working virtual env, change the
text, as it is just a matter of switching to the new venv, instead
of creating a new one from scratch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/bcf79d0399a1c3444ca938dcdce599c3273980ab.1587478901.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As requested by Jon, change the version check, in order to not
emit a warning if version is >= 1.7.9, but below 2.4.4.
After this patch, if someone used an older version, it will
say:
./scripts/sphinx-pre-install
Sphinx version 1.7.9
Note: It is recommended at least Sphinx version 2.4.4 if you need PDF support.
Detected OS: Fedora release 31 (Thirty One).
To upgrade Sphinx, use:
/devel/v4l/docs/sphinx_1.7.9/bin/python3 -m venv sphinx_2.4.4
. sphinx_2.4.4/bin/activate
pip install -r ./Documentation/sphinx/requirements.txt
If you want to exit the virtualenv, you can use:
deactivate
All optional dependencies are met.
Needed package dependencies are met.
If Sphinx is not detected at all, it
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/79584d317ba16f5d4f37801c5ee57cf04085f962.1587478901.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since python 3.3, the recommended way to setup a virtual env is
via "python -m venv".
Set this as a default, if python version is compatible with
such feature.
While here, add more comments to it, as the script is
getting more complex. So, better to add more things, to avoid
accidentally breaking it while improving it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/252cc849c79527ad496247e4c481961478adf41c.1586883286.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It seems that Mageia and OpenMandriva will reunite on a single
distribution. In any case, both came from Mandriva. So, it is
close enough to use the same logic.
So, add support for it.
Tested with OpenMandriva 4.1 and with Mageia 7.1.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/692809729c6818a0b0f75513da15970c53d5565c.1586883286.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently, with openSUSE Tumbleweed 20200303, it keeps
recommending this forever:
sudo zypper install --no-recommends rsvg-view
This dependency will never be fulfilled there, as the package
now is named as on other distros: rsvg-convert.
So, improve the detection to avoid such issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c3774f72ac36c5e5b5f446ae5db5b795d1f274f4.1586883286.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The Arch-linux detection is hit by catting /etc/issue, whose
contents is (nowadays):
Arch Linux \r (\l)
It sounds a little ackward to print such string, so,
instead, let's use the /etc/os-release file, with exists
on lots of distributions and should provide a more reliable
result.
We'll keep the old tests before it, in order to avoid possible
regressions with the other distros, although the new way should
probably work on all the currently supported distributions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/472924557afdf2b5492ae2a48c5ecfae216d54e2.1586883286.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
With Ubuntu 16.04 (and presumably Debian distros of the same age),
the instructions for setting up a python virtual environment should
do so with the python 3 interpreter. On these older distros, the
default python (and virtualenv command) might be python2 based.
Some of the packages that sphinx relies on are now only available
for python3. If you don't specify the python3 interpreter for
the virtualenv, you get errors when doing the pip installs for
various packages
Fix this by adding '-p python3' to the virtualenv recommendation
line.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://lore.kernel.org/r/1582594481-23221-1-git-send-email-tim.bird@sony.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When using a non-release version of Sphinx, from a local build (with
improvements for kernel doc handling, why not),
sphinx-build --version
reports versions of the form
sphinx-build 3.0.0+/4703d9119972
i.e. base version, a plus symbol, slash, and the start of the git hash
of whatever repository the command is run in (no, not the hash that
was used to build Sphinx!).
This patch fixes the installation check in sphinx-pre-install to
recognise such version output.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On Arch Linux, latexmk is installed in the texlive-core package.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The latest debian version "bullseye/sid" has changed the path of the file
"notoserifcjk-regular.ttc", with the previous change and this change we
keep the backward compatibility and add the latest debian version
Signed-off-by: Jeremy MAURO <j.mauro@criteo.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current implementation take a simple file as first argument, this
change allows to take a list as a first argument.
Some file could have a different path according distribution version
Signed-off-by: Jeremy MAURO <j.mauro@criteo.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add usage message on how to exit the virtualenv after documentation
work is done.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The translations guide need Noto CJK fonts. So, add a logic that
would suggest its install for distros.
It also fix a few other issues while testing the script
with several distributions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
On Gentoo, the portage changes for ImageMagick to work are
always suggested, even if already applied. While the two
extra commands should be harmless, add a check to avoid
reporting it without need.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The name of the package with carries latexmk is different
on two distros:
- On OpenSUSE, latexmk is packaged as "texlive-latexmk-bin"
- On Mageia, latexmk is packaged at "texlive-collection-basic"
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There aren't enough texlive packages for LaTeX-based builds
to work on CentOS/RHEL <= 7.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There's a missing parenthesis at the script, with causes it to
fail to detect non-Fedora releases (e. g. RHEL/CentOS).
Tested with Centos 7.6.1810.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Build of htmldocs fails for out-of-tree builds:
$ make V=1 O=~/build/kernel/ htmldocs
make -C /home/rppt/build/kernel -f /home/rppt/git/linux-docs/Makefile htmldocs
make[1]: Entering directory '/home/rppt/build/kernel'
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f /home/rppt/git/linux-docs/scripts/Makefile.build obj=Documentation htmldocs
Can't open Documentation/conf.py at /home/rppt/git/linux-docs/scripts/sphinx-pre-install line 230.
/home/rppt/git/linux-docs/Documentation/Makefile:80: recipe for target 'htmldocs' failed
make[2]: *** [htmldocs] Error 2
The scripts/sphinx-pre-install is trying to open files in the current
directory which is $KBUILD_OUTPUT rather than in $srctree.
Fix it.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
XCMhQ9s=
=cb80
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc4' into mauro
We need to pick up post-rc1 changes to various document files so they don't
get lost in Mauro's massive RST conversion push.
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review and
analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPCHLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxyACgql6ktH+Tv8Ho1747kKPiFca1Jq0AoK5HORXI
yB0DSTXYNjMtH41ypnsZ
=x2f8
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call the script every time a make docs target is selected, on
a simplified check mode.
With this change, the script will set two vars:
$min_version - obtained from `needs_sphinx` var inside
conf.py (currently, '1.3')
$rec_version - obtained from sphinx/requirements.txt.
With those changes, a target like "make htmldocs" will do:
1) If no sphinx-build/sphinx-build3 is found, it will run
the script on normal mode as before, checking for all
system dependencies and providing install hints for the
needed programs and will abort the build;
2) If no sphinx-build/sphinx-build3 is found, but there is
a sphinx_${VER}/bin/activate file, and if
${VER} >= $min_version (string comparation), it will
run in full mode, and will recommend to activate the
virtualenv. If there are multiple virtualenvs, it
will string sort the versions, recommending the
highest version and will abort the build;
3) If Sphinx is detected but has a version lower than
$min_version, it will run in full mode - with will
recommend creating a virtual env using sphinx/requirements.txt,
and will abort the build.
4) If Sphinx is detected and version is lower than
$rec_version, it will run in full mode and will
recommend creating a virtual env using sphinx/requirements.txt.
In this case, it **won't** abort the build.
5) If Sphinx is detected and version is equal or righer than
$rec_version it will return just after detecting the
version ("quick mode"), not checking if are there any
missing dependencies.
Just like before, if one wants to install Sphinx from the
distro, it has to call the script manually and use `--no-virtualenv`
argument to get the hints for his OS:
You should run:
sudo dnf install -y python3-sphinx python3-sphinx_rtd_theme
While here, add a small help for the three optional arguments
for the script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RHEL8 was already launched. This test won't get it, and will
do the wrong thing. Ok, we could fix it, but now we check
Sphinx version to ensure that it matches the minimal (1.3),
so there's no need for an explicit check there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
It is possible that multiple Sphinx virtualenvs are installed
on a given kernel tree. Change the logic to get the latest
version of those, as this is probably what the user wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As we want to switch to a newer Sphinx version in the future,
add some version detected logic, checking if the current
version meets the requirement and suggesting upgrade it the
version is supported but too old.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The usage of latexmk improves the PDF output, as it re-run
xelatex when it detects the need, in order to properly generate
indexes and cross-references.
As this is not a mandatory requirement, only suggest its
addition.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Only the media PDF book was requiring adjustbox, in order to
scale big tables. That worked pretty good with Sphinx versions
1.4 and 1.5, but Spinx 1.6 changed the way tables are produced,
by introducing some weird macros before tabulary.
That causes adjustbox to fail. So, it can't be used anymore,
and its usage was removed from the media book.
So, let's remove it from conf.py and sphinx-pre-install.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
RHEL 7.x and clone distros are shipped with Sphinx 1.1.x,
with is incompatible with Kernel ReST markups.
So, on those systems, the only alternative is to install
it via a Python virtual environment.
While seeking for "pip" on CentOS 7.3, I noticed that it
is not really needed, as python-virtualenv has its version
packaged there already. So, remove this from the list of
requirements for all distributions.
With regards to PDF, we need at least texlive-tabulary
extension, but that is not shipped there (at least on
CentOS). So, disable PDF packages as a whole.
Please notice, however, that texlive + amsmath is needed for
ReST to properly handle ReST ".. math::" tags. Yet, Sphinx
fall back to display the LaTeX math expressions as-is, if
such extension is not available.
So, let's just disable all texlive packages as a whole.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for detecting and installing missing packages
on Mageia. I opted to use "urpmi" at the install instructions,
as this is present on Mageia since ever. Yet, if I were using
Mageia 6, I would likely be using "dnf", as it is, IMHO,
easier to use.
Tested with Mageia 6.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Gentoo need some USE for GraphViz and ImageMagick to have
the features required by kfigure.py.
Output that when providing instructions for Gentoo.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
ImageMagick actually uses librsvg for conversions when converiting
from SVG (actually, it uses rsvg-convert). That causes the build to
fail with:
WARNING: Error #1 when calling: /usr/bin/convert /home/mchehab/docs/Documentation/media/uapi/v4l/selection.svg /home/mchehab/docs/Documentation/output/latex/selection.pdf
convert: delegate failed `'rsvg-convert' -o '%o' '%i'' @ error/delegate.c/InvokeDelegate/1919.
convert: unable to open file `/tmp/magick-8883oOQfHzrA5trM': No such file or directory @ error/constitute.c/ReadImage/544.
Add the corresponding dependencies.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
