IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 ]
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution.
Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0739af07d1d947af27c877f797cb82ceee702515 ]
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device,
the following test cycle has been implemented:
- power on
- check logs
- shutdown
- after detecting the system shutdown, disconnect power
- after approximately 60 seconds of sleep, power is restored
Running some cycles, sometimes error logs like this appear:
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19
...
These failed operation are happening during ax88179_reset execution, so
the initialization could not be correct.
In order to avoid this, we need to increase the delay after reset and
clock initial operations. By using these larger values, many cycles
have been run and no failed operations appear.
It would be better to check some status register to verify when the
operation has finished, but I do not have found any available information
(neither in the public datasheets nor in the manufacturer's driver). The
only available information for the necessary delays is the maufacturer's
driver (original values) but the proposed values are not enough for the
tested devices.
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cea7008190ad65b4aaae6e94667a358d2c10a696 ]
The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.
Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.
Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f7c0634926daf48cd2f6db6c1197a1047074088 ]
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f956bf2080862cfc97412e1eaa08689bc9838d20 ]
Initialize HW specific parameters only once. We do not have to do this
on every power_up (performed during initialization and on resume). Move
corresponding code to ->info_init()
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
Stable-dep-of: 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024ee930cb3c9ae49e4266aee89cfde0ebb407e1 ]
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34d21de99cea9cb17967874313e5b0262527833c ]
Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 024ee930cb3c ("bpf: Fix dev's rx stats for bpf_redirect_peer traffic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e0c5be8c73a674c92bd4ba77b75f4f8c91d32e ]
Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.
No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 024ee930cb3c ("bpf: Fix dev's rx stats for bpf_redirect_peer traffic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0a05acd6121ff0e810b44fdc24dbdfaa46b642 ]
Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.
The issue can be observed using modetest:
modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24
Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).
Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.
Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 796432efab1e372d404e7a71cc6891a53f105051 ]
The new directory offset helpers don't conform with the convention
of getdents() returning no more entries once a directory file
descriptor has reached the current end-of-directory.
To address this, copy the logic from dcache_readdir() to mark the
open directory file descriptor once EOD has been reached. Seeking
resets the mark.
Reported-by: Tavian Barnes <tavianator@tavianator.com>
Closes: https://lore.kernel.org/linux-fsdevel/20231113180616.2831430-1-tavianator@tavianator.com/
Fixes: 6faddda69f62 ("libfs: Add directory operations for stable offsets")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170043792492.4628.15646203084646716134.stgit@bazille.1015granger.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1898efcdbed32bb1c67269c985a50bab0dbc9493 ]
Propagate the per-queue stable_write flags into each bdev inode in bdev_add.
This makes sure devices that require stable writes have it set for I/O
on the block device node as well.
Note that this doesn't cover the case of a flag changing on a live device
yet. We should handle that as well, but I plan to cover it as part of a
more general rework of how changing runtime paramters on block devices
works.
Fixes: 1cb039f3dc16 ("bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag")
Reported-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-3-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 762321dab9a72760bf9aec48362f932717c9424d ]
folio_wait_stable waits for writeback to finish before modifying the
contents of a folio again, e.g. to support check summing of the data
in the block integrity code.
Currently this behavior is controlled by the SB_I_STABLE_WRITES flag
on the super_block, which means it is uniform for the entire file system.
This is wrong for the block device pseudofs which is shared by all
block devices, or file systems that can use multiple devices like XFS
witht the RT subvolume or btrfs (although btrfs currently reimplements
folio_wait_stable anyway).
Add a per-address_space AS_STABLE_WRITES flag to control the behavior
in a more fine grained way. The existing SB_I_STABLE_WRITES is kept
to initialize AS_STABLE_WRITES to the existing default which covers
most cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231025141020.192413-2-hch@lst.de
Tested-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 1898efcdbed3 ("block: update the stable_writes flag in bdev_add")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0561794b6b642b84b879bf97061c4b4fa692839e ]
The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.
Sample leak report:
BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
kmem_cache_alloc+0x25b/0x270
__i915_request_create+0x75/0x610 [i915]
i915_request_create+0x109/0x290 [i915]
__engines_record_defaults+0xca/0x440 [i915]
intel_gt_init+0x275/0x430 [i915]
i915_gem_init+0x135/0x2c0 [i915]
i915_driver_probe+0x8d1/0xdc0 [i915]
v2: removed whole intel_gt_release_all
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit e899505533852bf1da133f2f4c9a9655ff77f7e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6925165ea82b7765269ddd8dcad57c731aa00de ]
Add missing error return check for devm_ioport_map() and return the
error if this function call fails.
Fixes: 0d5ff566779f ("libata: convert to iomap")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f228d7c8a539714c1e9b7e7534f76bb7979f268 ]
During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.
Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93da8d75a66568ba4bb5b14ad2833acd7304cd02 ]
wg_xmit() can be called concurrently, KCSAN reported [1]
some device stats updates can be lost.
Use DEV_STATS_INC() for this unlikely case.
[1]
BUG: KCSAN: data-race in wg_xmit / wg_xmit
read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...
v2: also change wg_packet_consume_data_done() (Hangbin Liu)
and wg_packet_purge_staged_packets()
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ba2c459668cfe2aaacc5ebcd35b4b9ef8643013 ]
When the device uses a custom subsystem vendor ID, the function
wx_sw_init() returns before the memory of 'wx->mac_table' is allocated.
The null pointer will causes the kernel panic.
Fixes: 79625f45ca73 ("net: wangxun: Move MAC address handling to libwx")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ]
The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.
Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.
[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ]
Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .
Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a924db2d7b5eb69ba08b1a0af46e9f1359a9bdf ]
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Co-developed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6965809e526917b73c8f9178173184dcf13cec4b ]
For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.
Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a99d6557cacbc177314735342f77a2dda41872 ]
So far, all callers either holds spin lock or rcu read explicitly, and
most of the caller has added WARN_ON_ONCE(!rcu_read_lock_held()) or
lockdep_assert_held(&disk->queue->queue_lock).
Remove WARN_ON_ONCE(!rcu_read_lock_held()) from blkg_lookup() for
killing the false positive warning from blkg_conf_prep().
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: 83462a6c971c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a4ca1b4b77850544408595e2433f5d7811a9daa ]
When kafs tries to look up a cell in the DNS or the local config, it will
translate a lookup failure into EDESTADDRREQ whereas OpenAFS translates it
into ENOENT. Applications such as West expect the latter behaviour and
fail if they see the former.
This can be seen by trying to mount an unknown cell:
# mount -t afs %example.com:cell.root /mnt
mount: /mnt: mount(2) system call failed: Destination address required.
Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6bace7313d61e31f2b16fa3d774fd8cb3cb869e ]
afs_server_list is accessed with the rcu_read_lock() held from
volume->servers, so it needs to be cleaned up correctly.
Fix this by using kfree_rcu() instead of kfree().
Fixes: 8a070a964877 ("afs: Detect cell aliases 1 - Cells with root volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a01319feef7047aa2ba400ffa3e047776aa29ca ]
Defer the generation of a PING RESPONSE ACK in response to a PING ACK until
we've parsed the PING ACK so that we pick up any changes to the packet
queue so that we can update ackinfo.
This is also applied to an ACK generated in response to an ACK with the
REQUEST_ACK flag set.
Note that whilst the problem was added in commit 248f219cb8bc, it didn't
really matter at that point because the ACK was proposed in softirq mode
and generated asynchronously later in process context, taking the latest
values at the time. But this fix is only needed since the move to parse
incoming packets in an I/O thread rather than in softirq and generate the
ACK at point of proposal (b0346843b1076b34a0278ff601f8f287535cb064).
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3798680f2fbbe0ca3ab6138b34e0d161c36497ee ]
Fix RTT determination to be able to use any type of ACK as the response
from which RTT can be calculated provided its ack.serial is non-zero and
matches the serial number of an outgoing DATA or ACK packet. This
shouldn't be limited to REQUESTED-type ACKs as these can have other types
substituted for them for things like duplicate or out-of-order packets.
Fixes: 4700c4d80b7b ("rxrpc: Fix loss of RTT samples due to interposed ACK")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d565fa4300d9ebd5ba3bbd259ce841f8dab609d6 ]
Since commit a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
you can build the ism code without selecting the SMC network protocol.
That leaves some ism functions be reported as unused. Move these
functions under the conditional compile with CONFIG_SMC.
Also codify the suggestion to also configure the SMC protocol in ism's
Kconfig - but with an "imply" rather than a "select" as SMC depends on
other config options and allow for a deliberate decision not to build
SMC. Also, mention that in ISM's help.
Fixes: a72178cfe855 ("net/smc: Fix dependency of SMC on ISM")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/afd142a2-1fa0-46b9-8b2d-7652d41d3ab8@infradead.org/
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3e0f94d15700ac8e8c1c2355834f5d5c753c41d ]
Use the same value as the downstream driver. This change is needed for CPHY
mode to work correctly.
Fixes: 8b034e677111 ("drm/msm/dsi: add support for DSI-PHY on SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/566987/
Link: https://lore.kernel.org/r/20231110000216.29979-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7e4782bcf549221b4ccfffec2cf4d1a473f1a3 ]
should_we_balance is called for the decision to do load-balancing.
When sched ticks invoke this function, only one CPU should return
true. However, in the current code, two CPUs can return true. The
following situation, where b means busy and i means idle, is an
example, because CPU 0 and CPU 2 return true.
[0, 1] [2, 3]
b b i b
This fix checks if there exists an idle CPU with busy sibling(s)
after looking for a CPU on an idle core. If some idle CPUs with busy
siblings are found, just the first one should do load-balancing.
Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab03c23c2a162085b13200d7942fc5a00b5ccc8 ]
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when
it gets re-weighted, and the calculations can be simplified based
on the fact that re-weight won't change the w-average of all the
entities. Please check the proofs in comments.
But adjusting vruntime can also cause position change in RB-tree
hence require re-queue to fix up which might be costly. This might
be avoided by deferring adjustment to the time the entity actually
leaves tree (dequeue/pick), but that will negatively affect task
selection and probably not good enough either.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3803203bc5ec910a3eb06172cf6fb368e0e4390 ]
Some small fixes:
- lets make sure we are not adding ipv4 addresses in ipv6 section in
keyfile and vice versa.
- ADDR_FAMILY_IPV6 is a bit in addr_family. Test that bit instead of
checking the whole value of addr_family.
- Some trivial fixes in hv_set_ifconfig.sh.
These fixes are proposed after doing some internal testing at Red Hat.
CC: Shradha Gupta <shradhagupta@linux.microsoft.com>
CC: Saurabh Sengar <ssengar@linux.microsoft.com>
Fixes: 42999c904612 ("hv/hv_kvp_daemon:Support for keyfile based connection profile")
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Shradha Gupta <Shradhagupta@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20231016133122.2419537-1-anisinha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3badb15613c14dd35d3495b1dde5c90fcd616dd ]
In non-coherent GIC designs, the ITS tables must be flushed before writing
to the GITS_BASER<n> registers, otherwise the ITS could read dirty tables,
which results in unpredictable behavior.
Flush the tables right at the begin of its_setup_baser() to prevent that.
[ tglx: Massage changelog ]
Fixes: a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fang Xiang <fangxiang3@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf51c52a1f3c238d72c64e14d5e7702d3a245b82 ]
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1caf5f61dd8430ae5a0b4538afe4953ce7517cbb ]
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5911d02cac70d7fb52009fbd37423e63f8f6f9bc upstream.
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 923bbfe6c888812db1088d684bd30c24036226d2 upstream.
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 435f5b369657cffee4b04db1f5805b48599f4dbe upstream.
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b71f4ade1b8900d30c661d6c27f87c35214c398c upstream.
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a58555359a9f870543aaddef277c3396159895ce upstream.
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ffa8602e39b89469dc703ebab7a7e44c33da0f7 upstream.
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 256503071c2de2b5b5c20e06654aa9a44f13aa62 upstream.
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17daf01ab4e3e5a5929747aa05cc15eb2bad5438 upstream.
Otherwise userspace can spam the logs by using incorrect input values.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12f76050d8d4d10dab96333656b821bd4620d103 upstream.
We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8473bfdcb5b1a32fd05629c4535ccacd73bc5567 upstream.
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 432e664e7c98c243fab4c3c95bd463bea3aeed28 upstream.
The ATRM ACPI method is for fetching the dGPU vbios rom
image on laptops and all-in-one systems. It should not be
used for external add in cards. If the dGPU is thunderbolt
connected, don't try ATRM.
v2: pci_is_thunderbolt_attached only works for Intel. Use
pdev->external_facing instead.
v3: dev_is_removable() seems to be what we want
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3938eb956e383ef88b8fc7d556492336ebee52df upstream.
AMD dGPUs have integrated FW that runs as soon as the
device gets power and initializes the board (determines
the amount of memory, provides configuration details to
the driver, etc.). For direct PCIe attached cards this
happens as soon as power is applied and normally completes
well before the OS has even started loading. However, with
hotpluggable ports like USB4, the driver needs to wait for
this to complete before initializing the device.
This normally takes 60-100ms, but could take longer on
some older boards periodically due to memory training.
Retry for up to a second. In the non-hotplug case, there
should be no change in behavior and this should complete
on the first try.
v2: adjust test criteria
v3: adjust checks for the masks, only enable on removable devices
v4: skip bif_fb_en check
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
