IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit c0f5aec28edf98906d28f08daace6522adf9ee7a ]
While testing the blamed commit below, I was able to miss (!)
packetdrill failures in the fastopen test-cases.
On passive fastopen the child socket is created by incoming TCP MPC syn,
allow for both MPC_SYN and MPC_ACK header.
Fixes: 724b00c12957 ("mptcp: refine opt_mp_capable determination")
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23aa04042187cbde16f470b49d4ad60d32e9206 ]
We found the following dmesg calltrace when testing the GMAC NIC notebook:
[9.448656] ------------[ cut here ]------------
[9.448658] Unbalanced IRQ 43 wake disable
[9.448673] WARNING: CPU: 3 PID: 1083 at kernel/irq/manage.c:688 irq_set_irq_wake+0xe0/0x128
[9.448717] CPU: 3 PID: 1083 Comm: ethtool Tainted: G O 4.19 #1
[9.448773] ...
[9.448774] Call Trace:
[9.448781] [<9000000000209b5c>] show_stack+0x34/0x140
[9.448788] [<9000000000d52700>] dump_stack+0x98/0xd0
[9.448794] [<9000000000228610>] __warn+0xa8/0x120
[9.448797] [<9000000000d2fb60>] report_bug+0x98/0x130
[9.448800] [<900000000020a418>] do_bp+0x248/0x2f0
[9.448805] [<90000000002035f4>] handle_bp_int+0x4c/0x78
[9.448808] [<900000000029ea40>] irq_set_irq_wake+0xe0/0x128
[9.448813] [<9000000000a96a7c>] stmmac_set_wol+0x134/0x150
[9.448819] [<9000000000be6ed0>] dev_ethtool+0x1368/0x2440
[9.448824] [<9000000000c08350>] dev_ioctl+0x1f8/0x3e0
[9.448827] [<9000000000bb2a34>] sock_ioctl+0x2a4/0x450
[9.448832] [<900000000046f044>] do_vfs_ioctl+0xa4/0x738
[9.448834] [<900000000046f778>] ksys_ioctl+0xa0/0xe8
[9.448837] [<900000000046f7d8>] sys_ioctl+0x18/0x28
[9.448840] [<9000000000211ab4>] syscall_common+0x20/0x34
[9.448842] ---[ end trace 40c18d9aec863c3e ]---
Multiple disable_irq_wake() calls will keep decreasing the IRQ
wake_depth, When wake_depth is 0, calling disable_irq_wake() again,
will report the above calltrace.
Due to the need to appear in pairs, we cannot call disable_irq_wake()
without calling enable_irq_wake(). Fix this by making sure there are
no unbalanced disable_irq_wake() calls.
Fixes: 3172d3afa998 ("stmmac: support wake up irq from external sources (v3)")
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240112021249.24598-1-maqianga@uniontech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2518da8e6b0e248cfff1d4b6682e14020bd4d3f ]
The tests changed by this patch, as well as the scripts they source, use
features which are not part of POSIX sh (ex. 'source' and 'local'). As a
result, these tests fail when /bin/sh is dash such as on Debian. Change the
interpreter to bash so that these tests can run successfully.
Fixes: d43eff0b85ae ("selftests: bonding: up/down delay w/ slave link flapping")
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02eed83abc1395a1207591aafad9bcfc5cb1abcb ]
Fix err return value and reset pgmap->type after checking it.
Fixes: c83dee9b6394 ("drm/amdkfd: add SPM support for SVM")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab09fb9c629ed3aaea6a82467f08595dbc549726 ]
Warnings related to missing data in firmware manifest have
proven to be too verbose. This relates to description of
DSP module cost expressed in cycles per chunk (CPC). If
a matching value is not found in the manifest, kernel will
pass a zero value and DSP firmware will use a conservative
value in its place.
Downgrade the warnings to dev_dbg().
Fixes: d8a2c9879349 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e327b2372bc0f18c30433ac40be07741b59231c5 ]
In ravb_start_xmit(), ravb driver uses u32 variable to store result of
dma_map_single() call. Since ravb hardware has 32-bit address fields in
descriptors, this works properly when mapping is successful - it is
platform's job to provide mapping addresses that fit into hardware
limitations.
However, in failure case dma_map_single() returns DMA_MAPPING_ERROR
constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant
in u32 leads to truncation, and further call to dma_mapping_error()
fails to notice the error.
Fix that by storing result of dma_map_single() in a dma_addr_t
variable.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc9dfc8dc629e42f2234e3327b75324ffc752bc9 ]
A splice with MSG_SPLICE_PAGES will cause tls code to use the
tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user
provided pages from the msg into the msg_pl. This will loop over the
msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user
can also set the MORE flag to hint stack to delay sending until receiving
more pages and ideally a full buffer.
If the user adds more pages to the msg than can fit in the msg_pl
scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send
the buffer anyways.
What actually happens though is we abort the msg to msg_pl scatterlist
setup and then because we forget to set 'full record' indicating we
can no longer consume data without a send we fallthrough to the 'continue'
path which will check if msg_data_left(msg) has more bytes to send and
then attempts to fit them in the already full msg_pl. Then next
iteration of sender doing send will encounter a full msg_pl and throw
the warning in the syzbot report.
To fix simply check if we have a full_record in splice code path and
if not send the msg regardless of MORE flag.
Reported-and-tested-by: syzbot+f2977222e0e95cec15c8@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis <eadavis@qq.com>
Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2242fd537fab52d5f4d2fbb1845f047c01fad0cf ]
There is a bug in the bpf_iter_udp_batch() function that stops
the userspace from making forward progress.
The case that triggers the bug is the userspace passed in
a very small read buffer. When the bpf prog does bpf_seq_printf,
the userspace read buffer is not enough to capture the whole bucket.
When the read buffer is not large enough, the kernel will remember
the offset of the bucket in iter->offset such that the next userspace
read() can continue from where it left off.
The kernel will skip the number (== "iter->offset") of sockets in
the next read(). However, the code directly decrements the
"--iter->offset". This is incorrect because the next read() may
not consume the whole bucket either and then the next-next read()
will start from offset 0. The net effect is the userspace will
keep reading from the beginning of a bucket and the process will
never finish. "iter->offset" must always go forward until the
whole bucket is consumed.
This patch fixes it by using a local variable "resume_offset"
and "resume_bucket". "iter->offset" is always reset to 0 before
it may be used. "iter->offset" will be advanced to the
"resume_offset" when it continues from the "resume_bucket" (i.e.
"state->bucket == resume_bucket"). This brings it closer to
the bpf_iter_tcp's offset handling which does not suffer
the same bug.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d369f ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19ca0823f6eaad01d18f664a00550abe912c034c ]
The current logic is to use a default size 16 to batch the whole bucket.
If it is too small, it will retry with a larger batch size.
The current code accidentally does a state->bucket-- before retrying.
This goes back to retry with the previous bucket which has already
been done. This patch fixed it.
It is hard to create a selftest. I added a WARN_ON(state->bucket < 0),
forced a particular port to be hashed to the first bucket,
created >16 sockets, and observed the for-loop went back
to the "-1" bucket.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d369f ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 894d7508316e7ad722df597d68b4b1797a9eee11 ]
netif_txq_try_stop() uses "get_desc >= start_thrs" as the check for
the call to netif_tx_start_queue().
Use ">=" i netdev_txq_completed_mb(), too.
Fixes: c91c46de6bbc ("net: provide macros for commonly copied lockless queue stop/wake code")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9181d6f8a2bb32d158de66a84164fac05e3ddd18 ]
syzbot/KMSAN reports access to uninitialized data from gso_features_check() [1]
The repro use af_packet, injecting a gso packet and hdrlen == 0.
We could fix the issue making gso_features_check() more careful
while dealing with NETIF_F_TSO_MANGLEID in fast path.
Or we can make sure virtio_net_hdr_to_skb() pulls minimal network and
transport headers as intended.
Note that for GSO packets coming from untrusted sources, SKB_GSO_DODGY
bit forces a proper header validation (and pull) before the packet can
hit any device ndo_start_xmit(), thus we do not need a precise disection
at virtio_net_hdr_to_skb() stage.
[1]
BUG: KMSAN: uninit-value in skb_gso_segment include/net/gso.h:83 [inline]
BUG: KMSAN: uninit-value in validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
__dev_queue_xmit+0x1eac/0x5130 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5025 Comm: syz-executor279 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Reported-by: syzbot+7f4d0ea3df4d4fa9a65f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000005abd7b060eb160cd@google.com/
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 118a8cf504d7dfa519562d000f423ee3ca75d2c4 ]
EROFS can select compression algorithms on a per-file basis, and each
per-file compression algorithm needs to be marked in the on-disk
superblock for initialization.
However, syzkaller can generate inconsistent crafted images that use
an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA
algorithmtype even it's not set in `sbi->available_compr_algs`. This
can lead to an unexpected "BUG: kernel NULL pointer dereference" if
the corresponding decompressor isn't built-in.
Fix this by checking against `sbi->available_compr_algs` for each
m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset
bitmap is now fixed together since it was harmless previously.
Reported-by: <bugreport@ubisectech.com>
Fixes: 8f89926290c4 ("erofs: get compression algorithms directly on mapping")
Fixes: 622ceaddb764 ("erofs: lzma compression support")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Link: https://lore.kernel.org/r/20240113150602.1471050-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb4fb02cef3ab410b603c8f0e1c67f61d55f542 ]
Move erofs_load_compr_cfgs() into decompressor.c as well as introduce
a callback instead of a hard-coded switch for each algorithm for
simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231022130957.11398-1-xiang@kernel.org
Stable-dep-of: 118a8cf504d7 ("erofs: fix inconsistent per-file compression format")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08300adac3b8dab9e2fd3be0155c7d3093c755f4 ]
Currently get/set_link_ksettings ethtool ops are dependent on PCS.
When PCS is integrated, it will not have separate link config.
Bypass configuring and checking PCS for integrated PCS.
Fixes: aa571b6275fb ("net: stmmac: add new switch to struct plat_stmmacenet_data")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b4f36cd22a65b750b4cb6ac14804fb7d6e6c67d ]
q_usage_counter is the only thing preventing us from the limits changing
under us in __bio_split_to_limits, but blk_mq_submit_bio doesn't hold
it while calling into it.
Move the splitting inside the region where we know we've got a queue
reference. Ideally this could still remain a shared section of code, but
let's keep the fix simple and defer any refactoring here to later.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: 900e08075202 ("block: move queue enter logic into blk_mq_submit_bio()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724b00c12957973656d312dce2a110c75ae2c680 ]
OPTIONS_MPTCP_MPC is a combination of three flags.
It would be better to be strict about testing what
flag is expected, at least for code readability.
mptcp_parse_option() already makes the distinction.
- subflow_check_req() should use OPTION_MPTCP_MPC_SYN.
- mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK.
- subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK
- subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Fixes: 74c7dfbee3e1 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Link: https://lore.kernel.org/r/20240111194917.4044654-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1665273bdc7c201766c65e561c06711f2e050dc ]
mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK
was set in mptcp_parse_option().
We must refine the condition before we call subflow_hmac_valid().
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89e23277f9c16df6f9f9c1a1a07f8f132339c15c ]
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three
possible cases handled for MPTCPOPT_MP_JOIN option.
OPTIONS_MPTCP_MPJ is the combination of three flags:
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
This is a problem, because backup, join_id, token, nonce and/or hmac fields
could be left uninitialized in some cases.
Distinguish the three cases, as following patches will need this step.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454abb80e26ab85323a30e52aa7b0ee9aae1d38a ]
Since commit 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if
the stream is not supported") HDMI playback is broken with avs driver.
This happens because for HDMI stream (unlike generic HDA one)
channels_min for stream is not set when creating PCMs. Fix this by
setting the value based on first available converter.
Fixes: 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240112113349.2905328-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e398822c4751017fe401f57409488f5948d12fb5 ]
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY
is used with the ravb Ethernet driver. It has been discovered that when
bringing the Ethernet interface down/up continuously, e.g., with the
following sh script:
$ while :; do ifconfig eth0 down; ifconfig eth0 up; done
the link speed and duplex are wrong after interrupting the bring down/up
operation even though the Ethernet interface is up. To recover from this
state the following configuration sequence is necessary (executed
manually):
$ ifconfig eth0 down
$ ifconfig eth0 up
The behavior has been identified also on the Microchip SAMA7G5-EK board
which runs the macb driver and uses the same PHY.
The order of PHY-related operations in ravb_open() is as follows:
ravb_open() ->
ravb_phy_start() ->
ravb_phy_init() ->
of_phy_connect() ->
phy_connect_direct() ->
phy_attach_direct() ->
phy_init_hw() ->
phydev->drv->soft_reset()
phydev->drv->config_init()
phydev->drv->config_intr()
phy_resume()
kszphy_resume()
The order of PHY-related operations in ravb_close is as follows:
ravb_close() ->
phy_stop() ->
phy_suspend() ->
kszphy_suspend() ->
genphy_suspend()
// set BMCR_PDOWN bit in MII_BMCR
In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY
to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet).
Thus, when opening the interface after it has been previously closed (via
ravb_close()), the phydev->drv->config_init() and
phydev->drv->config_intr() reach the KSZ9131 PHY driver via the
ksz9131_config_init() and kszphy_config_intr() functions.
KSZ9131 specifies that the MII management interface remains operational
during SPD (Software Power-Down), but (according to manual):
- Only access to the standard registers (0 through 31) is supported.
- Access to MMD address spaces other than MMD address space 1 is possible
if the spd_clock_gate_override bit is set.
- Access to MMD address space 1 is not possible.
The spd_clock_gate_override bit is not used in the KSZ9131 driver.
ksz9131_config_init() configures RGMII delay, pad skews and LEDs by
accessesing MMD registers other than those in address space 1.
The datasheet for the KSZ9131 does not specify what happens if registers
from an unsupported address space are accessed while the PHY is in SPD.
To fix the issue the .soft_reset method has been instantiated for KSZ9131,
too. This resets the PHY to the default state before doing any
configurations to it, thus switching it out of SPD.
Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd66c2126eb9b5da2d89ae07dbcd73b909c2111 ]
The HW has the capability to check each frame if it is a PTP frame,
which domain it is, which ptp frame type it is, different ip address in
the frame. And if one of these checks fail then the frame is not
timestamp. Most of these checks were disabled except checking the field
minorVersionPTP inside the PTP header. Meaning that once a partner sends
a frame compliant to 8021AS which has minorVersionPTP set to 1, then the
frame was not timestamp because the HW expected by default a value of 0
in minorVersionPTP.
Fix this issue by removing this check so the userspace can decide on this.
Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec161add35b478a7746bf58bcdea6faa19129ef ]
amt driver uses skb->cb for storing tunnel information.
This job is worked before TC layer and then amt driver load tunnel info
from skb->cb after TC layer.
So, its cb area should not be overwrapped with CB area used by TC.
In order to not use cb area used by TC, it skips the biggest cb
structure used by TC, which was qdisc_skb_cb.
But it's not anymore.
Currently, biggest structure of TC's CB is tc_skb_cb.
So, it should skip size of tc_skb_cb instead of qdisc_skb_cb.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e47d8afb5ca533b27efc006405e5bcae2c4a7b ]
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length
of a received frame. This value is written to the register
AM65_CPSW_PORT_REG_RX_MAXLEN.
The maximum MTU configured on the network device should then leave
some room for the ethernet headers and frame check. Otherwise, if
the network interface is configured to its maximum mtu possible,
the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will
get dropped as oversized.
The switch supports ethernet frame sizes between 64 and 2024 bytes
(including VLAN) as stated in the technical reference manual, so
define AM65_CPSW_MAX_PACKET_SIZE with that maximum size.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0cb76a770083a22167659e64ba69af6425b1d9b ]
RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2
has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO,
whereas RPM2 has 128KB FIFO. This patch fixes an issue with
improper TX credit programming for the RPM2 link.
Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240108073036.8766-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8722014311e613244f33952354956a82fa4b0472 ]
rxrpc normally has the Don't Fragment flag set on the UDP packets it
transmits, except when it has decided that DATA packets aren't getting
through - in which case it turns it off just for the DATA transmissions.
This can be a problem, however, for RESPONSE packets that convey
authentication and crypto data from the client to the server as ticket may
be larger than can fit in the MTU.
In such a case, rxrpc gets itself into an infinite loop as the sendmsg
returns an error (EMSGSIZE), which causes rxkad_send_response() to return
-EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry,
leading to the I/O thread endlessly attempting to perform the transmission.
Fix this by disabling DF on RESPONSE packets for now. The use of DF and
best data MTU determination needs reconsidering at some point in the
future.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/1581852.1704813048@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80df7d6af7f6d229b34cf237b2cc9024c07111cd ]
The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.
For the PCI block store the following restrictions apply:
1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned
Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.
It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.
On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130ac ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3b3ec967a7d93b9010a5af9a2394c8b5c8f31ed ]
It's not granted that all entries of struct sof_conn_stream declare
a `normal_link` (a non-SOF, direct link) string, and this is the case
for SoCs that support only SOF paths (hence do not support both direct
and SOF usecases).
For example, in the case of MT8188 there is no normal_link string in
any of the sof_conn_stream entries and there will be more drivers
doing that in the future.
To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.
Fixes: 0caf1120c583 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240111105226.117603-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ccc1318cf4bd90601f221268e42c3374703d681 ]
When using the fls() helper, the translation table should be a power of
two; otherwise, the resulting value will not be correct.
For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window
size will be set to 0x2000000 instead of the expected size 0x3e00000.
Fix the translation window by splitting the MMIO space into multiple tables
if its size is not a power of two.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ]
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.
In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.
Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.
Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a1abc24850eb759e36a2f8869161c3b7254c904 ]
The nvmet_tcp_handle_h2c_data_pdu() function should take into
consideration the possibility that the header digest and/or the data
digests are enabled when calculating the expected PDU length, before
comparing it to the value stored in cmd->pdu_len.
Fixes: efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7de1dea76cd6a3707707af4ea2f8bc3cdeaeb11 ]
A previous patch introduced a struct_group() in nvme_common_command to help
stringop fortification figure out the length of the fields, but one function
is not currently using them:
In file included from drivers/nvme/target/core.c:7:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
^
Change this one to use the correct field name to avoid the warning.
Fixes: 5c629dc9609dc ("nvme: use struct group for generic command dwords")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ee7ffeb4ce50c80bc4504db6f39b25a2df6bcf4 ]
An earlier patch had tried to address a warning about a string copy with
missing zero termination:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
The new version causes a different warning with some compiler versions, notably
gcc-9 and gcc-10, and also misses the zero padding that was apparently done
intentionally in the original code:
drivers/nvme/target/trace.h:56:2: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
Change it to use strscpy_pad() with the original length, which will give
a properly padded and zero-terminated string as well as avoiding the warning.
Fixes: d86481e924a7 ("nvmet: use min of device_path and disk len")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be12ad45e15b5ee0e2526a50266ba1d295d26a88 ]
When the optional PRE_COPY support was added to speed up the device
compatibility check, it failed to update the saving/resuming data
pointers based on the fd offset. This results in migration data
corruption and when the device gets started on the destination the
following error is reported in some cases,
[ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
[ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010
[ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f
[ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found
[ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found
[ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2
Fixes: d9a871e4a143 ("hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120091406.780-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17dc11a02d8dacc7e78968daa2a8c16281eb7d1e ]
The commit in Fixes has changed a devm_clk_get()/clk_prepare_enable() into
a devm_clk_get_enabled().
It has updated the error handling path of the probe accordingly, but the
remove has been left unchanged.
Remove now the redundant clk_disable_unprepare() call from the remove
function.
Fixes: a90a987ebe00 ("spi: use devm_clk_get_enabled() in mcfqspi_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/6670aed303e1f7680e0911387606a8ae069e2cef.1704464447.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5459e186a5c9f412334321cff58d70dcb0e48a04 ]
cxl_port_setup_targets() modifies the ->targets[] array of a switch
decoder. target_list_show() expects to be able to emit a coherent
snapshot of that array by "holding" ->target_lock for read. The
target_lock is held for write during initialization of the ->targets[]
array, but it is not held for write during cxl_port_setup_targets().
The ->target_lock() predates the introduction of @cxl_region_rwsem. That
semaphore protects changes to host-physical-address (HPA) decode which
is precisely what writes to a switch decoder's target list affects.
Replace ->target_lock with @cxl_region_rwsem.
Now the side-effect of snapshotting a unstable view of a decoder's
target list is likely benign so the Fixes: tag is presumptive.
Fixes: 27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e24ce402c97dc3c0ab050593f1d5f6fde524564 ]
The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.
This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:
perf_db_export_mode = True
perf_db_export_calls = False
perf_db_export_callchains = True
def sample_table(*args):
print(f'sample_table({args})')
def call_path_table(*args):
print(f'call_path_table({args}')
Committer testing:
This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:
# perf test "perf script tests"
95: perf script tests : Ok
#
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6dcd8050fb7c2efec6946ae9c49bc186b0a7475 ]
When using a leon kernel with qemu there where no console prompt.
The root cause is the handling of the fifo size in the tx part of the
apbuart driver.
The qemu uart driver only have a very rudimentary status handling and do
not report the number of chars queued in the tx fifo in the status register.
So the driver ends up with a fifo size of 1.
In the tx path the fifo size is divided by 2 - resulting in a fifo
size of zero.
The original implementation would always try to send one char, but
after the introduction of uart_port_tx_limited() the fifo size is
respected even for the first char.
There seems to be no good reason to divide the fifo size with two - so
remove this. It looks like something copied from the original amba driver.
With qemu we now have a minimum fifo size of one char, so we show
the prompt.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: d11cc8c3c4b6 ("tty: serial: use uart_port_tx_limited()")
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: <sparclinux@vger.kernel.org>
Link: https://lore.kernel.org/r/20231226121607.GA2622970@ravnborg.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 017dbfc05c31284150819890b4cc86a699cbdb71 ]
For Gen1 isoc-in transfer, host still send out unexpected ACK after device
finish the burst with a short packet, this will cause an exception on the
connected device, such as, a usb 4k camera.
It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use
3k here, the side-effect is that may cause performance drop about 10%,
including bulk transfer.
Fixes: 926d60ae64a6 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20240104061640.7335-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55a8210c9e7d21ff2644809699765796d4bfb200 ]
When processing a packed profile in unpack_profile() described like
"profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}"
a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then
passed to aa_splitn_fqname().
aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace.
Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later
aa_alloc_profile() crashes as the new profile name is NULL now.
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
<TASK>
? strlen+0x1e/0xa0
aa_policy_init+0x1bb/0x230
aa_alloc_profile+0xb1/0x480
unpack_profile+0x3bc/0x4960
aa_unpack+0x309/0x15e0
aa_replace_profiles+0x213/0x33c0
policy_update+0x261/0x370
profile_replace+0x20e/0x2a0
vfs_write+0x2af/0xe00
ksys_write+0x126/0x250
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1e/0xa0
It seems such behaviour of aa_splitn_fqname() is expected and checked in
other places where it is called (e.g. aa_remove_profiles). Well, there
is an explicit comment "a ns name without a following profile is allowed"
inside.
AFAICS, nothing can prevent unpacked "name" to be in form like
":samba-dcerpcd" - it is passed from userspace.
Deny the whole profile set replacement in such case and inform user with
EPROTO and an explaining message.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 04dc715e24d0 ("apparmor: audit policy ns specified in policy load")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
