IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The admin guide is a good start, but it's time to turn it into something
better than an unordered blob of files. This is a first step in that
direction. The TOC has been split up and annotated, the guides have been
reordered, and minor tweaks have been applied to a few of them.
One consequence of splitting up the TOC is that we don't really want to use
:numbered: anymore, since the count resets every time and there doesn't
seem to be a way to change that. Eventually we probably want to group the
documents into sub-books, at which point we can go back to a single TOC,
but it's probably early to do that.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Let's make the title of this document (which shows up in the top page)
better describe its contents.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This will be the initial landing point for readers, so give them a bit of
introductory material. Also split the TOC into area-specific chunks to
make the whole thing a bit more approachable.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Merge Mauro's massive patch series creating the process and admin-guide
books. I think there's a lot of stuff to clean up here, but there's no
point in holding things up for that.
Mauro sez:
This patch series continues the efforts of converting the Linux Kernel
documentation to Sphinx.
It contains text to ReST conversion of several files under Documentation,
and a few ones under the main dir (README, REPORTING-BUGS).
All patches on this series can be found on my development tree:
https://git.linuxtv.org/mchehab/experimental.git/log/?h=lkml-books-v2
The Kernel docs html output after this series can be seen at:
https://mchehab.fedorapeople.org/kernel_docs/
Fix some minor spelling errors and capitalization issues.
Signed-off-by: Igor Vuk <parcijala@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit applies upstream change, commit ebff09a6ff
("locking/Documentation: Clarify limited control-dependency scope"), to
Korean translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The dvb/ and video4linux/ dirs were removed, as now, all media
documentation is under media/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we moved the real README file to Documentation/admin-guide/README.rst,
let's add a replacement, pointing to it, and giving the main directions
about documentation.
In the future, perhaps it would be worth to move the contents
of Documentation/00-Index into this README.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Those files got moved to Documentation/process, but as they're very
well known files, add pointers to their new locations.
PS.: I opted to not merge this patch with the previous one
in order to make the diff of the previous one more consistent,
as it will show only renames.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.
As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add several documents to the development-process ReST book.
As we don't want renames, use symlinks instead, keeping those
documents on their original place.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we'll type this a lot, after adding CodingStyle & friends,
let's rename the directory name to a shorter one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adjust the readme file for it to use the ReST markup:
- add chapter/section markups;
- use ``foo`` for commands;
- use :: for verbatim and script blocks;
- replace unsupported markup _foo_ by **foo**;
- add cross-references to other ReST files;
- use lower case on the section titles, to match other ReST files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- add a title to the document;
- use :: before verbatim blocks;
- add blank lines where required;
- use protocol for URL references;
- use a verbatim block for the bugs template;
- add cross references to SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx doesn't like nested tables on the LaTex output.
So, change the table there to be displayed properly at
the PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document section markups;
- use quote blocks where needed;
- adjust spaces and blank lines;
- add it to the development-processs book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Probably, unicode is something that we might remove from the
docs, as all modern systems support it. Yet, this chapter
is fun, as it mentions support for the Klington fictional
charset ;)
On the other hand, I bet all other OS user manuals
explicit mention unicode support.
So, convert it to ReST and include it at the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use a table for the valid commands;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Add a document title;
- use quote blocks where needed;
- convert parameters to a nested table;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- replace _foo_ by **foo**;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Add a document title;
- use .. note:: markup;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- replace _foo_ by **foo**;
- while here, remove whitespaces at the end of paragraph;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix document title;
- use quote blocks where needed;
- use .. note:: for notes;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix identatio for the document title;
- remove its index;
- create a table for hash algorithm to be used;
- use quote blocks where needed;
- use monotonic fonts for parameters;
- adjust whitespaces and blank lines;
- Fix case on section titles;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- add a title for the document;
- convert some parameters to tables;
- use quote blocks where needed;
- use monotonic fonts for parameters;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- add a title for the document;
- convert the table;
- use quote block for the changelog;
- use monotonic fonts for file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- use a quote blocks where needed;
- use ``foo`` for monotonic;
- adjust whitespaces and blank lines;
- fix the second list (that starts with 0, instead of A)
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- use a quote blocks where needed;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. note:: for /sbin/init file permissions;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- use a quote blocks where needed;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. note:: for the line-range note;
- cleanup whitespaces;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- use a quote block for the big device major/minor list;
- use tables for the other device tables;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. attention:: for the attention note to developers;
- use cross-references where needed;
- cleanup whitespaces;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Add a document title and remove its own index;
- use monotonic fonts for paths;
- use quote blocks where needed;
- adjust/use spaces to properly format paragraphs;
- add it to the user book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix identation for the document title;
- use monotonic fonts for paths;
- use quote blocks where needed;
- adjust spaces to properly format paragraphs;
- use :menuselection: and :kbd: for the menu item and keys;
- point too the right item at the menu;
- add it to the user book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix identation for the document title;
- use monotonic fonts for paths;
- use quote blocks where needed;
- adjust spaces to properly format paragraphs;
- use :menuselection: for the menu item;
- add it to the user book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Fix identation for the document title;
- use monotonic fonts for commands, paths, etc;
- use quote blocks where needed;
- adjust spaces to properly format paragraphs;
- add it to the user book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Convert it to ReST markup and add it to the user book:
- Add a title to the document;
- touch spaces/new lines to fix Sphinx format;
- use ``foo`` for commands;
- use quote blocks where needed;
- add it to the user book;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- promote the section level of the document name;
- add/remove spaces/new lines where needed to format the output;
- use quote blocks.
- add it to the user book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adjust the file for it to be parsed by Sphinx:
- adjust the document title to be parsed;
- use :: for quote blocks;
- fix the horizontal bar markup;
- lower case the TODO title.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Convert adding-syscalls.txt to ReST markup and add it to the
development-process book:
- add extra lines to make Sphinx to correctly parse paragraphs;
- use quote blocks for examples;
- use monotonic font for dirs, function calls, etc;
- mark manpage pages using the right markup;
- add cross-reference to SubmittingPatches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Perform a relatively simple conversion of vme_api.txt to reStructuredText
and move under driver-api, which seems the most logical place for this
documentation.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch fix a spelling typo in cciss.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update UIO documentation to include basic information about
uio_hv_generic.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This patch fix spelling typos in Documentation/device-mapper/dm-raid.txt.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Current uprobetracer examples don't work as they use an incorrect syntax
- if no event name is specified then 'p/r' must not be followed by a
colon
- if no event name is specified then the default event name will have a
'p_' prefix, so use that in the '-' example as well
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Python module names should not have hyphens per [PEP 8]. Drop the hyphen
from kernel-doc.py. The extension directive remains unchanged.
[PEP 8] https://www.python.org/dev/peps/pep-0008/#package-and-module-names
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
