IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now that the only user is handled by common code, remove the option to
specify custom handlers through match data.
This is effectively a revert of commit:
5ae15e76271 ("drm/msm/dsi: Allow to specify dsi config as pdata")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527662/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-7-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Now that the logic can handle multiple sets of registers, move
the QCM2290 to the common logic and mark it deprecated. This allows us
to remove a couple of structs, saving some memory.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527656/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-6-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The configs are identical, other than the number of *maximum* DSI
hosts allowed. This isn't an issue, unless somebody deliberately
tries to access the inexistent host by adding a dt node for it.
Remove the SC7180 struct and point the hw revision match to the
SDM845's one. On a note, this could have been done back when
7180 support was introduced.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527654/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-5-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, we allow for MAX_DSI entries in io_start to facilitate for
MAX_DSI number of DSI hosts at different addresses. The configuration
is matched against the DSI CTRL hardware revision read back from the
component. We need a way to resolve situations where multiple SoCs
with different register maps may use the same version of DSI CTRL. In
preparation to do so, make msm_dsi_config a 2d array where each entry
represents a set of configurations adequate for a given SoC.
This is totally fine to do, as the only differentiating factors
between same-version-different-SoCs configurations are the number of
DSI hosts (1 or 2, at least as of today) and the set of base registers.
The regulator setup is the same, because the DSI hardware is the same,
regardless of the SoC it was implemented in.
In addition to that, update the matching logic such that it will loop
over VARIANTS_MAX variants, making sure they are all taken into account.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527652/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-3-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In preparation for supporting multiple sets of possible base registers,
remove the num_dsi variable. We're comparing the io_start array contents
with the reg value from the DTS, so it will either match one of the
expected values or don't match against a zero (which we get from partial
array initialization).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527658/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-2-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The point of the previous cleanup was to disallow "qcom,mdss-dsi-ctrl"
alone. This however didn't quite work out and the property became
undocumented instead of deprecated. Fix that.
Additionally, the "qcom," prefix was missed previously. Fix it.
Fixes: 0c0f65c6dd44 ("dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527651/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-1-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.
By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().
This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.
Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.
Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start
Both succeed on A619_holi (SM6375) and A630 (SDM845).
Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Recently I contributed the switch to OPP API for all Adreno generations.
I did however also skip over the fact that GPUs with a GMU don't specify
a core clock of any kind in the GPU node. While that didn't break
anything, it did introduce unwanted spam in the dmesg:
adreno 5000000.gpu: error -ENOENT: _opp_set_clknames: Couldn't find clock with name: core_clk
Guard the entire logic so that it's not used with GMU-equipped GPUs.
Fixes: 9f251f934012 ("drm/msm/adreno: Use OPP for every GPU generation")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530347/
Link: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v6-1-2034115bb60c@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit e25e92e08e32 ("drm/msm: devcoredump iommu fault support")
enabled SMMU stalling to collect GPU state, but only for a6xx. It tied
enabling the stall with tha per-instance pagetables creation.
Since that commit SoCs with a5xx also gained support for
adreno-smmu-priv. Move stalling into generic code and add corresponding
resume_translation calls.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522720/
Link: https://lore.kernel.org/r/20230214123504.3729522-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
This series adds a deadline hint to fences, so realtime deadlines
such as vblank can be communicated to the fence signaller for power/
frequency management decisions.
This is partially inspired by a trick i915 does, but implemented
via dma-fence for a couple of reasons:
1) To continue to be able to use the atomic helpers
2) To support cases where display and gpu are different drivers
See https://patchwork.freedesktop.org/series/93035/
This does not yet add any UAPI, although this will be needed in
a number of cases:
1) Workloads "ping-ponging" between CPU and GPU, where we don't
want the GPU freq governor to interpret time stalled waiting
for GPU as "idle" time
2) Cases where the compositor is waiting for fences to be signaled
before issuing the atomic ioctl, for example to maintain 60fps
cursor updates even when the GPU is not able to maintain that
framerate.
Signed-off-by: Rob Clark <robdclark@chromium.org>
For an atomic commit updating a single CRTC (ie. a pageflip) calculate
the next vblank time, and inform the fence(s) of that deadline.
v2: Comment typo fix (danvet)
v3: If there are multiple CRTCs, consider the time of the soonest vblank
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Will be used in the next commit to set a deadline on fences that an
atomic update is waiting on.
v2: Calculate time at *start* of vblank period, not end
v3: Fix kbuild complaints
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
As the finished fence is the one that is exposed to userspace, and
therefore the one that other operations, like atomic update, would
block on, we need to propagate the deadline from from the finished
fence to the actual hw fence.
v2: Split into drm_sched_fence_set_parent() (ckoenig)
v3: Ensure a thread calling drm_sched_fence_set_deadline_finished() sees
fence->parent set before drm_sched_fence_set_parent() does this
test_bit(DMA_FENCE_FLAG_HAS_DEADLINE_BIT).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
We had all of the internal driver APIs, but not the all important
userspace uABI, in the dma-buf doc. Fix that. And re-arrange the
comments slightly as otherwise the comments for the ioctl nr defines
would not show up.
v2: Fix docs build warning coming from newly including the uabi header
in the docs build
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add a way to set a deadline on remaining resv fences according to the
requested usage.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Propagate the deadline to all the fences in the chain.
v2: Use dma_fence_chain_contained [Tvrtko]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Now that everything that controls which LRU an obj lives in *except* the
backing pages is protected by the LRU lock, add a special path to unpin
in the job_run() path, where we are assured that we already have backing
pages and will not be racing against eviction (because the GEM object's
dma_resv contains the fence that will be signaled when the submit/job
completes).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527845/
Link: https://lore.kernel.org/r/20230320144356.803762-10-robdclark@gmail.com
Since the LRU lock is already acquired when moving an obj between LRUs,
we can use it to protect pin_count and madv, without any significant
change in locking (ie. it just expands the scope of the lock by a hand-
ful of instructions). This prepares the way to decrement the pin_count
in the job_run() path without needing to hold the obj lock, to avoid a
potential deadlock (or rather stall) caused by the fence-signaling path
(job_run()) blocking on shrinker/reclaim. (Only a stall because the
wait for fence signaling wait_for_idle() is not infinite.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527843/
Link: https://lore.kernel.org/r/20230320144356.803762-9-robdclark@gmail.com
We need to use the inuse count to track that a BO is pinned until
we have the hw_fence. But we want to remove the obj lock from the
job_run() path as this could deadlock against reclaim/shrinker
(because it is blocking the hw_fence from eventually being signaled).
So split that tracking out into a per-vma lock with narrower scope.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527839/
Link: https://lore.kernel.org/r/20230320144356.803762-5-robdclark@gmail.com
The flags are only accessed (1) when submit is constructed, before
enqueuing to gpu sched (ie. when still visible to only the task calling
the submit ioctl), (2) here, where we own a reference to the submit and
are serialized on the gpu sched thread, and (3) after the submit is
retired and last reference is dropped, which is serialized on the
submit's reference count. Hence locking is unneeded here.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527830/
Link: https://lore.kernel.org/r/20230320144356.803762-3-robdclark@gmail.com
Propagate the deadline to all the fences in the array.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Add a way to hint to the fence signaler of an upcoming deadline, such as
vblank, which the fence waiter would prefer not to miss. This is to aid
the fence signaler in making power management decisions, like boosting
frequency as the deadline approaches and awareness of missing deadlines
so that can be factored in to the frequency scaling.
v2: Drop dma_fence::deadline and related logic to filter duplicate
deadlines, to avoid increasing dma_fence size. The fence-context
implementation will need similar logic to track deadlines of all
the fences on the same timeline. [ckoenig]
v3: Clarify locking wrt. set_deadline callback
v4: Clarify in docs comment that this is a hint
v5: Drop DMA_FENCE_FLAG_HAS_DEADLINE_BIT.
v6: More docs
v7: Fix typo, clarify past deadlines
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
The next generated header update will drop the _LO/_HI suffix, now that
the userspace tooling properly understands 64b vs 32b regs (and the _LO/
_HI workarounds are getting cleaned up). So convert to using the 64b
reg helpers in prep.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527923/
Link: https://lore.kernel.org/r/20230320185416.938842-1-robdclark@gmail.com
Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8f2 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
The runtime PM status can only be updated while runtime PM is disabled.
Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.
Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.
Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).
Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
