IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The pointer q is being assigned a value but it is never read. The
assignment and pointer are redundant and can be removed.
Cleans up clang scan build warning:
fs/bcachefs/quota.c:813:2: warning: Value stored to 'q' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Variable offset_into_extent is being assigned to zero and a few
statements later it is being re-assigned again to the save value.
The second assignment is redundant and can be removed. Cleans up
clang-scan build warning:
fs/bcachefs/io.c:2722:3: warning: Value stored to 'offset_into_extent'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The variables start_offset and end_offset are being initialized with
values that are never read, they being re-assigned later on. The
initializations are redundant and can be removed.
Cleans up clang-scan build warnings:
fs/bcachefs/fs-io.c:243:11: warning: Value stored to 'start_offset' during
its initialization is never read [deadcode.DeadStores]
fs/bcachefs/fs-io.c:244:11: warning: Value stored to 'end_offset' during
its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The pointer dst is being initialized with a value that is never read,
it is being re-assigned later on when it is used in a while-loop
The initialization is redundant and can be removed.
Cleans up clang-scan build warning:
fs/bcachefs/disk_groups.c:186:30: warning: Value stored to 'dst' during
its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The pointer d is being initialized with a value that is never read,
it is being re-assigned later on when it is used in a for-loop.
The initialization is redundant and can be removed.
Cleans up clang-scan build warning:
fs/bcachefs/buckets.c:1303:25: warning: Value stored to 'd' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have the logged operations btree, we can make
finsert/fcollapse atomic w.r.t. unclean shutdown as well.
This adds bch_logged_op_finsert to represent the state of an finsert or
fcollapse, which is a bit more complicated than truncate since we need
to track our position in the "shift extents" operation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we guaranteed atomicity of truncate after unclean shutdown
with the BCH_INODE_I_SIZE_DIRTY flag - which required a full scan of the
inodes btree.
Recently the deleted inodes btree was added so that we no longer have to
scan for deleted inodes, but truncate was unfinished and that change
left it broken.
This patch uses the new logged operations btree to fix truncate
atomicity; we now log an operation that can be replayed at the start of
a truncate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new btree for long running logged operations - i.e. for logging
operations that we can't do within a single btree transaction, so that
they can be resumed if we crash.
Keys in the logged operations btree will represent operations in
progress, with the state of the operation stored in the value.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This pulls the non vfs specific parts of truncate and finsert/fcollapse
out of fs-io.c, and moves them to io_misc.c.
This is prep work for logging these operations, to make them atomic in
the event of a crash.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More reorganization, this splits up io.c into
- io_read.c
- io_misc.c - fallocate, fpunch, truncate
- io_write.c
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the bch2_fs_alloc() error path we call bch2_fs_free() without setting
BCH_FS_STOPPING - this is fine.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_quota_read(), when scanning for inodes, may attempt to look up
inodes that have been deleted in the main subvolume - this is not an
error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we handle a transaction restart in a nested context, we need to
return -BCH_ERR_transaction_restart_nested because we invalidated the
outer context's iterators and locks.
bch2_propagate_key_to_snapshot_leaves() wasn't doing this, this patch
fixes it to use trans_was_restarted().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes mark_btree_node_locked() to take an enum
btree_node_locked_type, not a six_lock_type, since BTREE_NODE_UNLOCKED
is -1 which may cause problems converting back and forth to
six_lock_type if short enums are in use.
With this change, we never store BTREE_NODE_UNLOCKED in a six_lock_type
enum.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's no longer legal to use a zero size array as a flexible array
member - this causes UBSAN to complain.
This patch switches our zero size arrays to normal flexible array
members when possible, and inserts casts in other places (e.g. where we
use the zero size array as a marker partway through an array).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Commit c2d5ff36065a4 ("bcachefs: Start journal reclaim thread
earlier") tweaked reclaim thread management to start a bit earlier
in the mount sequence by moving the start call from
__bch2_fs_read_write() to bch2_fs_journal_start(). This has the side
effect of never starting the reclaim thread on a ro->rw transition,
which can be observed by monitoring reclaim behavior via the
journal_reclaim tracepoints. I.e. once an fs has remounted ro->rw,
we only ever rely on direct reclaim from that point forward.
Since bch2_journal_reclaim_start() properly handles the case where
the reclaim thread has already been created, restore the start call
in the read-write helper. This allows the reclaim thread to start
early when appropriate and also exit/restart on remounts or freeze
cycles. In the latter case it may be possible to simply allow the
task to freeze rather than destroy it, but for now just fix the
immediate bug.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We weren't correctly checking snapshot skiplist nodes - we were checking
if they were in the same tree, not if they were an actual ancestor.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we set bucket data type to BCH_DATA_stripe based on the data
pointer, not just the stripe pointer, it doesn't make sense to check for
no stripe in the .key_invalid method - this is a situation that
shouldn't happen, but our other fsck/repair code handles it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Print more information out about moving contexts - fold in the output of
the redundant bch2_data_jobs_to_text(), and also include information
relevant to whether move_data() should be blocked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When doing updates early in recovery, before we can go RW, we still want
to check that keys are valid at commit time - this moves key invalid
checking to before the "btree updates to journal" path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If fsck finds a key that needs work done, the primary example being an
unlinked inode that needs to be deleted, and the key is in an internal
snapshot node, we have a bit of a conundrum.
The conundrum is that internal snapshot nodes are shared, and we in
general do updates in internal snapshot nodes because there may be
overwrites in some snapshots and not others, and this may affect other
keys referenced by this key (i.e. extents).
For example, we might be seeing an unlinked inode in an internal
snapshot node, but then in one child snapshot the inode might have been
reattached and might not be unlinked. Deleting the inode in the internal
snapshot node would be wrong, because then we'll delete all the extents
that the child snapshot references.
But if an unlinked inode does not have any overwrites in child
snapshots, we're fine: the inode is overwrritten in all child snapshots,
so we can do the deletion at the point of comonality in the snapshot
tree, i.e. the node where we found it.
This patch adds a new helper, bch2_propagate_key_to_snapshot_leaves(),
to handle the case where we need a to update a key that does have
overwrites in child snapshots: we copy the key to leaf snapshot nodes,
and then rewind fsck and process the needed updates there.
With this, fsck can now always correctly handle unlinked inodes found in
internal snapshot nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
After deleteing snapshots, we may be left with a snapshot tree where
some nodes only have one child, and we have a linear chain.
Interior snapshot nodes are never used directly (i.e. they never have
subvolumes that point to them), they are only referered to by child
snapshot nodes - hence, they are redundant.
The existing code talks about redundant snapshot nodes as forming and
equivalence class; i.e. nodes for which snapshot_t->equiv is equal. In a
given equivalence class, we only ever need a single key at a given
position - i.e. multiple versions with different snapshot fields are
redundant.
The existing snapshot cleanup code deletes these redundant keys, but not
redundant nodes. It turns out this is buggy, because we assume that
after snapshot deletion finishes we should only have a single key per
equivalence class, but the btree update path doesn't preserve this -
overwriting keys in old snapshots doesn't check for the equivalence
class being equal, and thus we can end up with duplicate keys in the
same equivalence class and fsck complaining about snapshot deletion not
having run correctly.
The equivalence class notion has been leaking out of the core snapshots
code and into too much other code, i.e. fsck, so this patch takes a
different approach: snapshot deletion now moves keys to the node in an
equivalence class being kept (the leafiest node) and then deletes the
redundant nodes in the equivalance class.
Some work has to be done to correctly delete interior snapshot nodes;
snapshot node depth and skiplist fields for descendent nodes have to be
fixed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The is_ancestor bitmap is at optimization for bch2_snapshot_is_ancestor;
once we get sufficiently close to the ancestor ID we're searching for we
test a bitmap.
But initialization of the is_ancestor bitmap was broken; we do it by
using bch2_snapshot_parent(), but we call that on nodes that haven't
been initialized yet with bch2_mark_snapshot().
Fix this by adding a separate loop in bch2_snapshots_read() for
initializing the is_ancestor bitmap, and also add some new debug asserts
for checking this sort of breakage in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the bch2_mount() error path, we were calling
deactivate_locked_super(), which calls ->kill_sb(), which in our case
was calling bch2_fs_free() without __bch2_fs_stop().
This changes bch2_mount() to just call bch2_fs_stop() directly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In https://github.com/koverstreet/bcachefs/issues/450, we're seeing
unexplained btree_path_relock_fail events - according to the information
currently in the tracepoint, it appears the relock should be succeeding.
This adds lock counts to the tracepoint to help track it down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
subvolume.c has gotten a bit large, this splits out a separate file just
for managing snapshot trees - BTREE_ID_snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In __bch2_buffered_write, if we fail to write to an entire !uptodate
folio, we have to back out the write, bail out and retry.
But we were missing an iov_iter_revert() call, so the data written to
the folio was lost and the rest of the write shifted to the wrong
offset.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The folio_hole_offset() helper returns a mix of bool and int types.
The latter is to support a possible -EAGAIN error code when using
nonblocking locks. This is not only confusing, but the only caller
also essentially ignores errors outside of stopping the range
iteration. This means an -EAGAIN error can't return directly from
folio_hole_offset() and may be lost via bch2_clamp_data_hole().
Fix up the error handling and make it more readable.
__filemap_get_folio() returns -ENOENT instead of NULL when no folio
exists, so reuse the same error code in folio_hole_offset(). Fix up
bch2_seek_pagecache_hole() to return the current offset on -ENOENT,
but otherwise return unexpected error code up to the caller.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For extents, we increase the number of bits of the size field to allow
extents to get bigger due to merging - but this code didn't check for
overflow.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- There was no need for a retry loop in bch2_extent_fallocate(); if we
have to retry we may be overwriting something different and we need
to return an error and let the caller retry.
- The bch2_alloc_sectors_start() error path was wrong, and wasn't
running our cleanup at the end of the function
This also fixes a very rare open bucket leak due to the missing cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug in the cycle detector, bch2_check_for_deadlock() - we
have to make sure the node pointers in the btree paths array are set to
something not-garbage before another thread may see them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes the device removal tests, which have been failing at random
due to the fact that when we're running the .key_invalid checks in the
write path the key may actually no longer exist - we might be racing
with the keys being deleted.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
To ensure we aren't shooting ourselves in the foot after merge for
potentially doing future revisions for dirent or for storing multiple
names for casefolding, limit this to 512 for now.
Previously this define was linked to the max size a d_name in
bch_dirent could be.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Avoids doing a full strnlen for getting the length of the name of a
dirent entry.
Given the fact that the name of dirents is stored at the end of the
bkey's value, and we know the length of that in u64s, we can find the
last u64 and figure out how many NUL bytes are at the end of the string.
On little endian systems this ends up being the leading zeros of the
last u64, whereas on big endian systems this ends up being the trailing
zeros of the last u64.
We can take that value in bits and divide it by 8 to get the number of
NUL bytes at the end.
There is no endian-fixup or other compatibility here as this is string
data interpreted as a u64.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A nice cleanup that avoids a bunch of open-coding name/string usage
around dirent usage.
Will be used by casefolding impl in future commits.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
