IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the DEBUG_GEM config option is set then escalate the 'unexpected
firmware version' message from a notice to an error. This will ensure
that the CI system treats such occurences as a failure and logs a bug
about it (or fails the pre-merge testing).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-7-John.C.Harrison@Intel.com
It was noticed that duplicate entries in the firmware table could cause
an infinite loop in the firmware loading code if that entry failed to
load. Duplicate entries are a bug anyway and so should never happen.
Ensure they don't by tweaking the table validation code to reject
duplicates.
For full m/m/p files, that can be done by simply tweaking the patch
level check to reject matching values. For reduced version entries,
the filename itself must be compared.
v2: Improve comment (review by Daniele)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-6-John.C.Harrison@Intel.com
The validation of the firmware table was being done inside the code
for scanning the table for the next available firmware blob. Which is
unnecessary. So pull it out into a separate function that is only
called once per blob type at init time.
Also, drop the CONFIG_SELFTEST requirement and make errors terminal.
It was mentioned that potential issues with backports would not be
caught by regular pre-merge CI as that only occurs on tip not stable
branches. Making the validation unconditional and failing driver load
on detecting of a problem ensures that such backports will also be
validated correctly.
This requires adding a firmware global flag to indicate an issue with
any of the per firmware tables. This is done rather than adding a new
state enum as a new enum value would be a much more invasive change -
lots of places would need updating to support the new error state.
Note also that this change means that a table error will cause the
driver to wedge even on platforms that don't require firmware files.
This is intentional as per the above backport concern - someone doing
backports is not guaranteed to test on every platform that they may
potential affect. So forcing a failure on all platforms ensures that
the problem will be noticed and corrected immediately.
v2: Change to unconditionally fail module load on a validation error
(review feedback/discussion with Daniele).
v3: Add a new flag to track table validation errors (review
feedback/discussion with Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-5-John.C.Harrison@Intel.com
If the GuC load is taking an excessively long time, the wait loop
currently prints the GT frequency. Extend that to include the GuC
status as well so we can see if the GuC is actually making progress or
not.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-3-John.C.Harrison@Intel.com
When reduced version firmware files were added (matching major
component being the only strict requirement), the minor version was
still tracked and a notification reported if it was older. However,
the patch version should really be tracked as well for the same
reasons. The KMD can work without the change but if the effort has
been taken to release a new firmware with the change then there must
be a valid reason for doing so - important bug fix, security fix, etc.
And in that case it would be good to alert the user if they are
missing out on that new fix.
v2: Use correct patch version number and drop redunant debug print
(review by Daniele / CI results).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504202252.1104212-2-John.C.Harrison@Intel.com
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem'
v2: Fix return value documentation while at it (Rodrigo)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504092320.1787627-1-jani.nikula@intel.com
You can't document function pointer member as functions.
drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object
drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2a81f9ee78591def0534c81a63dbc652c44bbd3.1683041799.git.jani.nikula@intel.com
You can't document both a sub-struct type and a struct member at the
same time. Separate them.
drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/89ab5cf179566c429383cc57db746038f75cba0d.1683041799.git.jani.nikula@intel.com
The GSC notifies us of a proxy request via the HECI2 interrupt. The
interrupt must be enabled both in the HECI layer and in our usual gt irq
programming; for the latter, the interrupt is enabled via the same enable
register as the GSC CS, but it does have its own mask register. When the
interrupt is received, we also need to de-assert it in both layers.
The handling of the proxy request is deferred to the same worker that we
use for GSC load. New flags have been added to distinguish between the
init case and the proxy interrupt.
v2: Make sure not to set the reset bit when enabling/disabling the GSC
interrupts, fix defines (Alan)
v3: rebase on proxy status register check
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly
on platforms where it is integrated in GT, i915 needs to transfer the
messages from GSC to CSME and back.
The proxy flow is as follow:
1 - i915 submits a request to GSC asking for the message to CSME
2 - GSC replies with the proxy header + payload for CSME
3 - i915 sends the reply from GSC as-is to CSME via the mei proxy
component
4 - CSME replies with the proxy header + payload for GSC
5 - i915 submits a request to GSC with the reply from CSME
6 - GSC replies either with a new header + payload (same as step 2,
so we restart from there) or with an end message.
After GSC load, i915 is expected to start the first proxy message chain,
while all subsequent ones will be triggered by the GSC via interrupt.
To communicate with the CSME, we use a dedicated mei component, which
means that we need to wait for it to bind before we can initialize the
proxies. This usually happens quite fast, but given that there is a
chance that we'll have to wait a few seconds the GSC work has been moved
to a dedicated WQ to not stall other processes.
v2: fix code style, includes and variable naming (Alan)
v3: add extra check for proxy status, fix includes and comments
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-4-daniele.ceraolospurio@intel.com
Add GSC proxy driver. It to allows messaging between GSC component
on Intel graphics card and CSE device.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-3-daniele.ceraolospurio@intel.com
GSC Proxy component is used for communication between the
Intel graphics driver and MEI driver.
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-2-daniele.ceraolospurio@intel.com
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops'
drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put'
drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get'
drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b31edbb33116c8002dd1e72d3ad25efe5dd0176.1683041799.git.jani.nikula@intel.com
The comments are closer to not being kernel-doc.
drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events '
drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum '
drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* How many different events we track in the global PMU mask.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7656b8f58b088c108a2a32f7089329740efabba1.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set'
drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get'
drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7f201c6cb715e4b3cece78ffa893a75610ecd27d.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'ads_null_cache' not described in 'intel_guc_state_capture'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'max_mmio_per_node' not described in 'intel_guc_state_capture'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c83878163221ed3684a6de5d5e1c5373ddd5c06f.1683041799.git.jani.nikula@intel.com
The documentation is closer to not being kernel-doc, so just drop the
kernel-doc markers.
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line:
* struct guc_debug_capture_list_header / struct guc_debug_capture_list
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line:
* struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line:
* struct guc_state_capture_header_t / struct guc_state_capture_t /
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state'
drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c210d53fdbd6da5fac42e435855d269504919d7.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/gt/intel_context.h:108: warning: Function parameter or member 'ce' not described in 'intel_context_lock_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:123: warning: Function parameter or member 'ce' not described in 'intel_context_is_pinned'
drivers/gpu/drm/i915/gt/intel_context.h:142: warning: Function parameter or member 'ce' not described in 'intel_context_unlock_pinned'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8359a1cef6b5ab268a9dcc1a382281b6e39cfa64.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Function parameter or member 'file' not described in 'i915_gem_object_lookup_rcu'
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Excess function parameter 'filp' description in 'i915_gem_object_lookup_rcu'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80c96863b7a0755aaa07efb49bcccd9ba620c6d7.1683041799.git.jani.nikula@intel.com
The documentation is closer to not being kernel-doc. Just drop the
kernel-doc /** indicators.
drivers/gpu/drm/i915/i915_request.h:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Request queue structure.
drivers/gpu/drm/i915/i915_request.h:477: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns true if seq1 is later than seq2.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a7a0f6e5b33e59ef4339304d01e7ef7ee04430.1683041799.git.jani.nikula@intel.com
The parameters aren't documented, and the file isn't included in Sphinx
build anyway, so demote the kernel-doc to a regular comment.
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for'
drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6e33a7f03c4a78739fa96e6ae74eb272ae147e7.1683041799.git.jani.nikula@intel.com
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Function parameter or member 'conf' not described in 'intel_vgpu_alloc_resource'
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Excess function parameter 'param' description in 'intel_vgpu_alloc_resource'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9213214c9caa296ebd349a5d5b44c2bbb45cdf99.1683041799.git.jani.nikula@intel.com
GuC based register dumps in error capture logs were basically broken
for virtual engines. This can be seen in igt@gem_exec_balancer@hang:
[IGT] gem_exec_balancer: starting subtest hang
[drm] GPU HANG: ecode 12:4:e1524110, in gem_exec_balanc [6388]
[drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D
[drm] GPU HANG: ecode 12:4:00000000, in gem_exec_balanc [6388]
[IGT] gem_exec_balancer: exiting, ret=0
The test causes a hang on both engines of a virtual engine context.
The engine instance zero hang gets a valid error capture but the
non-instance-zero hang does not.
Fix that by scanning through the list of pending register captures
when a hang notification for a virtual engine is received. That way,
the hang can be assigned to the correct physical engine prior to
starting the error capture process. So later on, when the error capture
handler tries to find the engine register list, it looks for one on
the correct engine.
Also, sneak in a missing blank line before a comment in the node
search code.
v2: Fix null pointer deref on non-GuC platforms.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-5-John.C.Harrison@Intel.com
Don't use 'xe_lp*' prefixes for register lists that are common with
Gen8.
Don't add Xe only GSC registers to pre-Xe devices that don't
even have a GSC engine.
Fix Xe_LP name.
Don't use GEN9 as a prefix for register lists that contain all GEN8
registers.
Rename the 'default_' register list prefix to 'gen8_' as that is the
more accurate name.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-4-John.C.Harrison@Intel.com
A pair of pre-Xe registers were being included in the Xe capture list.
GuC was rejecting those as being invalid and logging errors about
them. So, stop doing it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: dce2bd542337 ("drm/i915/guc: Add Gen9 registers for GuC error state capture.")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428185636.457407-2-John.C.Harrison@Intel.com
GPU accumulates the context runtime in a 32 bit counter - CTX_TIMESTAMP
in the context image. This value is saved/restored on context switches.
KMD accumulates these values into a 64 bit counter taking care of any
overflows as needed. This count provides the basis for client specific
busyness in the fdinfo interface.
KMD accumulation happens just before the context is unpinned and when
context switches out. This works for execlist back-end since execlist
scheduling has visibility into context switches. With GuC mode, KMD does
not have visibility into context switches and this counter is
accumulated only when context is unpinned. Context is unpinned once the
context scheduling is successfully disabled. Disabling context
scheduling is an asynchronous operation. Also if a context is servicing
frequent requests, scheduling may never be disabled on it.
For GuC mode, since updates to the context runtime may be delayed, add
hooks to update the context runtime in a worker thread as well as when
a user queries for it.
Limitation:
- If a context is never switched out or runs for a long period of time,
the runtime value of CTX_TIMESTAMP may never be updated, so the
counter value may be unreliable. This patch does not support such
cases. Such support must be available from the GuC FW and it is WIP.
This patch is an extract from previous work authored by John/Umesh here -
https://patchwork.freedesktop.org/patch/496441/?series=105085&rev=4
v2: (Ashutosh)
- Drop COPS_RUNTIME_ACTIVE_TOTAL
- s/guc_context_update_clks/__guc_context_update_stats
- Pin context before accessing in guc_timestamp_ping
- In guc_context_unpin, use spinlock to serialize access to runtime stats
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Co-developed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427224705.2785566-2-umesh.nerlige.ramappa@intel.com
Use the new efficient frequency toggling interface. Also
create a helper function to restore the frequencies after
the test is done.
v2: Restore max freq first and then min.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-2-vinay.belgaumkar@intel.com
SLPC enables use of efficient freq at init by default. It is
possible for GuC to request frequencies that are higher than
the 'software' max if user has set it lower than the efficient
level.
Scenarios/tests that require strict fixing of freq below the efficient
level will need to disable it through this interface.
v2: Keep just one interface to toggle sysfs. With this, user will
be completely responsible for toggling efficient frequency if need
be. There will be no implicit disabling when user sets min < RP1 (Ashutosh)
v3: Remove unused label, review comments (Ashutosh)
v4: Toggle efficient freq usage in SLPC selftest and checkpatch fixes
v5: Review comments (Andi) and add a separate patch for selftest updates
Fixes: 95ccf312a1e4 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230426003942.1924347-1-vinay.belgaumkar@intel.com
MTL currently uses gen8_ppgtt_insert_huge when managing huge pages.
This is because MTL reports as not supporting 64K pages, or more
accurately, the system that reports whether a platform has 64K pages
reports false for MTL. This is only half correct, as the 64K page support
reporting system only cares about 64K page support for LMEM, which MTL
doesn't have.
MTL should be using xehpsdv_ppgtt_insert_huge. However, simply changing
over to using that manager doesn't resolve the issue because MTL is
expecting the virtual address space for the page table to be flushed after
initialization, so we must also add a flush statement there.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-2-7868d54eaa27@intel.com
Convert the igt_mock_ppgtt_huge_fill and igt_mock_ppgtt_64K mock selftests
into live selftests as their requirements have recently become
platform-dependent. Additionally, apply necessary platform dependency
checks to these tests.
v8:
- handle properly 64K and 2M pages
v9:
- do not expect 64K pages if 2M are present
- fix hex printing
- obey commit message line limit
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Co-developed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425-hugepage-migrate-v8-1-7868d54eaa27@intel.com
Instead of erroring out when GuC reset is in progress, block waiting for
GuC reset to complete which is a more reasonable uapi behavior.
v2: Avoid race between wake_up_all and waiting for wakeup (Rodrigo)
v3: Remove timeout when blocked (Tvrtko)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420164041.1428455-4-ashutosh.dixit@intel.com
