873792 Commits

Author SHA1 Message Date
Gwan-gyeong Mun
789c4aea3f drm/i915: Split a setting of MSA to MST and SST
The setting of MSA is done by the DDI .pre_enable() hook. And when we are
using MST, the MSA is only set to first mst stream by calling of
DDI .pre_eanble() hook. It raies issues to non-first mst streams.
Wrong MSA or missed MSA packets might show scrambled screen or wrong
screen.

This splits a setting of MSA to MST and SST cases. And In the MST case it
will call a setting of MSA after an allocating of Virtual Channel from
MST encoder pre_enable callback.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112212
Fixes: 0c06fa156006 ("drm/i915/dp: Add support of BT.2020 Colorimetry to DP MSA")
Fixes: d4a415dcda35 ("drm/i915: Fix MST oops due to MSA changes")
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106212636.502471-1-gwan-gyeong.mun@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
[vsyrjala: nuke spurious newline]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit bd8c9cca88765caee0dfa93967c6d8f16b4cbfb9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113125241.20547-1-ville.syrjala@linux.intel.com
2019-11-13 15:00:10 +02:00
Chris Wilson
98ae6fb3f1 drm/i915/execlists: Move reset_active() from schedule-out to schedule-in
The gem_ctx_persistence/smoketest was detecting an odd coherency issue
inside the LRC context image; that the address of the ring buffer did
not match our associated struct intel_ring. As we set the address into
the context image when we pin the ring buffer into place before the
context is active, that leaves the question of where did it get
overwritten. Either the HW context save occurred after our pin which
would imply that our idle barriers are broken, or we overwrote the
context image ourselves. It is only in reset_active() where we dabble
inside the context image outside of a serialised path from schedule-out;
but we could equally perform the operation inside schedule-in which is
then fully serialised with the context pin -- and remains serialised by
the engine pulse with kill_context(). (The only downside, aside from
doing more work inside the engine->active.lock, was the plan to merge
all the reset paths into doing their context scrubbing on schedule-out
needs more thought.)

Fixes: d12acee84ffb ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Testcase: igt/gem_ctx_persistence/smoketest
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-3-chris@chris-wilson.co.uk
(cherry picked from commit 31b61f0ef9af62b6404d8df5dcd2cf58f80c9f53)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-13 12:26:35 +02:00
Chris Wilson
cee7fb437e drm/i915/userptr: Try to acquire the page lock around set_page_dirty()
set_page_dirty says:

	For pages with a mapping this should be done under the page lock
	for the benefit of asynchronous memory errors who prefer a
	consistent dirty state. This rule can be broken in some special
	cases, but should be better not to.

Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).

However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7ff ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e11a ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d407f79438dc4f87943db21f7134cfc65)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-12 10:22:58 +02:00
Chris Wilson
a7d87b70d6 drm/i915/pmu: "Frequency" is reported as accumulated cycles
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit e88866ef02851c88fe95a4bb97820b94b4d46f36)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-12 10:22:46 +02:00
Chris Wilson
d231c15aff drm/i915: Protect context while grabbing its name for the request
Inside print_request(), we query the context/timeline name. Nothing
immediately protects the context from being freed if the request is
complete -- we rely on serialisation by the caller to keep the name
valid until they finish using it. Inside intel_engine_dump(), we
generally only print the requests in the execution queue protected by the
engine->active.lock, but we also show the pending execlists ports which
are not protected and so require a rcu_read_lock to keep the pointer
valid.

[ 1695.700883] BUG: KASAN: use-after-free in i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.700981] Read of size 8 at addr ffff8887344f4d50 by task gem_ctx_persist/2968
[ 1695.701068]
[ 1695.701156] CPU: 1 PID: 2968 Comm: gem_ctx_persist Tainted: G     U            5.4.0-rc6+ #331
[ 1695.701246] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017
[ 1695.701334] Call Trace:
[ 1695.701424]  dump_stack+0x5b/0x90
[ 1695.701870]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.701964]  print_address_description.constprop.7+0x36/0x50
[ 1695.702408]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702856]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.702947]  __kasan_report.cold.10+0x1a/0x3a
[ 1695.703390]  ? i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.703836]  i915_fence_get_timeline_name+0x53/0x90 [i915]
[ 1695.704241]  print_request+0x82/0x2e0 [i915]
[ 1695.704638]  ? fwtable_read32+0x133/0x360 [i915]
[ 1695.705042]  ? write_timestamp+0x110/0x110 [i915]
[ 1695.705133]  ? _raw_spin_lock_irqsave+0x79/0xc0
[ 1695.705221]  ? refcount_inc_not_zero_checked+0x91/0x110
[ 1695.705306]  ? refcount_dec_and_mutex_lock+0x50/0x50
[ 1695.705709]  ? intel_engine_find_active_request+0x202/0x230 [i915]
[ 1695.706115]  intel_engine_dump+0x2c9/0x900 [i915]

Fixes: c36eebd9ba5d ("drm/i915/gt: execlists->active is serialised by the tasklet")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111114323.5833-1-chris@chris-wilson.co.uk
(cherry picked from commit fecffa4668cf62e679aeea8caa9d0f241f822578)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-12 10:22:41 +02:00
Lionel Landwerlin
2b3c7f0db8 drm/i915/perf: always consider holding preemption a privileged op
The ordering of the checks in the existing code can lead to holding
preemption not being considered as privileged op.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 9cd20ef7803c ("drm/i915/perf: allow holding preemption on filtered ctx")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111095308.2550-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 0b0120d4c7b013eba59b33254febc0a6e4049e13)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-12 10:22:37 +02:00
Ville Syrjälä
f77021372e drm/i915: Preload LUTs if the hw isn't currently using them
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.

However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.

Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.

v2: Deal with uapi vs. hw crtc state split
    s/GCM/CGM/ typo fix

Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3ca0 ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd5107a7f58e62c8b35b61de9a70ce82)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 11:44:43 +02:00
Ville Syrjälä
aeec766133 drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.

Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.

Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b7421c ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe64200033499a4955f431e315bb807899)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 10:30:12 +02:00
Chris Wilson
3cac195875 drm/i915: Leave the aliasing-ppgtt size alone
The hidden aliasing-ppgtt's size is never revealed, as we only inspect
the front GTT when engaged. However, we were "fixing" the hidden ppgtt
to match, with the net result that we ended up leaking the unused
portion on Braswell were we preallocated the entire set of top level
PDP, see gen8_preallocate_top_level_pdp().

[   26.025364] DMA-API: pci 0000:00:02.0: device driver has pending DMA allocations while released from device [count=2]
[   26.025364] One of leaked entries details: [device address=0x0000000230778000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as single]
[   26.025683] WARNING: CPU: 0 PID: 415 at kernel/dma/debug.c:894 dma_debug_device_change+0x1a4/0x1f0
[   26.025905] Modules linked in: i915(E-) intel_powerclamp(E) nls_ascii(E) nls_cp437(E) crct10dif_pclmul(E) crc32_pclmul(E) vfat(E) crc32c_intel(E) fat(E) ghash_clmulni_intel(E) prime_numbers(E) intel_gtt(E) i2c_algo_bit(E) efi_pstore(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) evdev(E) drm(E) aesni_intel(E) glue_helper(E) crypto_simd(E) cryptd(E) intel_cstate(E) sg(E) efivars(E) pcspkr(E) video(E) button(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) lpc_ich(E) ahci(E) mfd_core(E) i2c_i801(E) libahci(E) i2c_designware_pci(E) i2c_designware_core(E)
[   26.026613] CPU: 0 PID: 415 Comm: rmmod Tainted: G            E     5.4.0-rc6+ #25
[   26.026837] Hardware name:  /, BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[   26.027080] RIP: 0010:dma_debug_device_change+0x1a4/0x1f0
[   26.027319] Code: 89 54 24 08 e8 ad 60 62 00 48 8b 54 24 08 48 89 c6 41 57 4d 89 e9 49 89 d8 44 89 f1 41 54 48 c7 c7 e0 61 06 82 e8 c1 aa f5 ff <0f> 0b 5a 59 48 83 3c 24 00 0f 85 97 26 00 00 8b 05 77 47 92 01 85
[   26.027600] RSP: 0018:ffff888228d2fcc8 EFLAGS: 00010282
[   26.027831] RAX: 0000000000000000 RBX: 0000000230778000 RCX: 0000000000000000
[   26.028053] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffed10451a5f8f
[   26.028279] RBP: ffff88823480c0b0 R08: 0000000000000001 R09: ffffed1046e83eb1
[   26.028500] R10: ffffed1046e83eb0 R11: ffff88823741f587 R12: ffffffff82067340
[   26.028725] R13: 0000000000001000 R14: 0000000000000002 R15: ffffffff82067480
[   26.028952] FS:  00007fdf3ed174c0(0000) GS:ffff888237400000(0000) knlGS:0000000000000000
[   26.029185] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   26.029405] CR2: 000055e211109030 CR3: 0000000230139000 CR4: 00000000001006f0
[   26.029622] Call Trace:
[   26.029846]  notifier_call_chain+0x67/0xa0
[   26.030076]  blocking_notifier_call_chain+0x5a/0x80
[   26.030305]  device_release_driver_internal+0x20d/0x260
[   26.030535]  driver_detach+0x7b/0xe1
[   26.030761]  bus_remove_driver+0x8c/0x153
[   26.030993]  pci_unregister_driver+0x2d/0xf0
[   26.032603]  i915_exit+0x16/0x1c [i915]

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 1eda701eace2 ("drm/i915/gtt: Recursive cleanup for gen8")
References: c082afac86cb ("drm/i915: Move aliasing_ppgtt underneath its i915_ggtt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106221223.7437-1-chris@chris-wilson.co.uk
(cherry picked from commit 2b0a4fc25ad8e3da4a156995a513dca6abf247de)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 10:30:02 +02:00
Jani Nikula
56a327f983 drm/i915/display: only include intel_dp_link_training.h where needed
The intel_dp_link_training.h include has no need or place in
intel_display.h. Include it in intel_display.c instead.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: eadf6f9170d5 ("drm/i915/display/icl: Enable master-slaves in trans port sync")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029103947.7535-1-jani.nikula@intel.com
(cherry picked from commit 3c954c418eb363343ff515756e440aa1dc216e0b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 10:29:57 +02:00
Chris Wilson
6300c66372 drm/i915/gem: Fix error path to unlock if the GEM context is closed
When inside the lock, remember to unlock even if you want to leave
early.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a4e7ccdac38e ("drm/i915: Move context management under GEM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106144155.25727-1-chris@chris-wilson.co.uk
(cherry picked from commit feba2b8146633390f8df44946eceb4274f7377ed)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 10:29:52 +02:00
Chris Wilson
d29926fa5f drm/i915/gt: Only drop heartbeat.systole if the sole owner
Mika spotted that only using cancel_delayed_work() could mean that we
attempted to clear the heartbeat.systole while the worker was still
running. Rectify the situation by only touching the systole from outside
the worker if we suceeded in cancelling the worker before it could run.
The worker is expected to clean up by itself upon idling.

Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106133129.17732-1-chris@chris-wilson.co.uk
(cherry picked from commit 841e86728615baa77b0ea9d8b357e66052c75fe5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-11 10:29:47 +02:00
Chris Wilson
d9dace9438 drm/i915/selftests: Add intel_gt_suspend_prepare
Call suspend_prepare first so that we don't leave GuC so confused.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101174405.7389-1-chris@chris-wilson.co.uk
(cherry picked from commit 833e979db36c0202f21e1e0bdd7339a27e50b8e3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:06:25 +02:00
Chris Wilson
3fd850dda8 drm/i915/gt: Drop false assertion on user_forcewake
The counter is removed from the pm wakeref count, but it remains intact
so that we can restore it upon resume. Ergo inside suspend, it may have
a value.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-1-chris@chris-wilson.co.uk
(cherry picked from commit 83c55ee82f3ac5a1c36dab9f7150554c4da773a8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:06:02 +02:00
Chris Wilson
a70a9e998e drm/i915: Defer rc6 shutdown to suspend_late
Currently we shutdown rc6 during i915_gem_resume() but this is called
during the preparation phase (i915_drm_prepare) for all suspend paths,
but we only want to shutdown rc6 for S3+. Move the actual shutdown to
i915_gem_suspend_late().

We then need to differentiate between suspend targets, to distinguish S0
(s2idle) where the device is kept awake but needs to be in a low power
mode (the same as runtime suspend) from the device suspend levels where
we lose control of HW and so must disable any HW access to dangling
memory.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111909
Fixes: c113236718e8 ("drm/i915: Extract GT render sleep (rc6) management")
Testcase: igt/gem_exec_suspend/power-S0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-4-chris@chris-wilson.co.uk
(cherry picked from commit c601cb2135fda0b5fb9d08153b0125fcb153c7e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:05:42 +02:00
Chris Wilson
d4033a9b03 drm/i915/gt: Move user_forcewake application to GT
We already track the debugfs user_forcewake on the GT, so it is natural
to pull the suspend/resume handling under gt/ as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-3-chris@chris-wilson.co.uk
(cherry picked from commit 9ab3fe2d7dc39b088591b0121f041cbfd6bb1ef8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:05:25 +02:00
Chris Wilson
489d1953c1 drm/i915/gem: Leave reloading kernel context on resume to GT
As we already do reload the kernel context in intel_gt_resume, repeating
that action inside i915_gem_resume() as well is redundant.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-2-chris@chris-wilson.co.uk
(cherry picked from commit c8f6cfc56fc86999725e71a19d91269482bd2c01)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:05:09 +02:00
Chris Wilson
fd6fe087ca drm/i915/gt: Call intel_gt_sanitize() directly
Assume all responsibility for operating on the HW to sanitize the GT
state upon load/resume in intel_gt_sanitize() itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101141009.15581-1-chris@chris-wilson.co.uk
(cherry picked from commit 797a615357ac0feb79c9ce41f5eaac3eb738a51f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 16:04:16 +02:00
Chris Wilson
8eb4704b12 drm/i915: Protect request peeking with RCU
Since the execlists_active() is no longer protected by the
engine->active.lock, we need to protect the request pointer with RCU to
prevent it being freed as we evaluate whether or not we need to preempt.

Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Fixes: 13ed13a4dcbf ("drm/i915: Don't set queue_priority_hint if we don't kick the submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-2-chris@chris-wilson.co.uk
(cherry picked from commit 7d148635253328dda7cfe55d57e3c828e9564427)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-05 09:56:03 +02:00
Dave Airlie
8a86b00a43 Merge tag 'drm-next-5.5-2019-11-01' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.5-2019-11-01:

amdgpu:
- Add EEPROM support for Arcturus
- Enable VCN encode support for Arcturus
- Misc PSP fixes
- Misc DC fixes
- swSMU cleanup

amdkfd:
- Misc cleanups
- Fix typo in cu bitmap parsing

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101190607.3763-1-alexander.deucher@amd.com
2019-11-04 10:22:53 +10:00
Dave Airlie
2ef4144d1e Merge tag 'drm-intel-next-2019-11-01-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:

- Make context persistence optional
  Allow userspace to tie the context lifetime to FD lifetime,
  effectively allowing Ctrl-C killing of a process to also clean
  up the hardware immediately.
  Compute changes: https://github.com/intel/compute-runtime/pull/228
  The compute driver is shipping in Ubuntu. uAPI acked by Mesa folks.

- Put future HW and their uAPIs under STAGING & BROKEN
  Introduces DRM_I915_UNSTABLE Kconfig menu for working on the new
  uAPI for future HW in upstream. We already disable driver loading
  by default the platform is deemed ready. This is a second level
  of protection based on compile time switch (STAGING & BROKEN).

- Under DRM_I915_UNSTABLE: Add the fake lmem region on iGFX
  Fake local memory region on integrated GPU through cmdline:
  memmap=2G$16G i915.fake_lmem_start=0x400000000
  Currently allows testing non-mappable GGTT behavior and running
  kernel selftest for local memory.

Driver Changes:

- Fix Bugzilla #112084: VGA external monitor not working (Ville)
- Add support for half float framebuffers (Ville)
- Add perf support on TGL (Lionel)
- Replace hangcheck by heartbeats (Chris)
- Allow SPT PCH on all AML devices (James)
- Add new CNL PCH for CML platform (Imre)
- Allow 100 ms (Kconfig) for workloads to exit before reset (Chris, Jon, Joonas)
- Forcibly pre-empt a context after 100 ms (Kconfig) of delay  (Chris)
- Make timeslice duration Kconfig configurable (Chris)
- Whitelist PS_(DEPTH|INVOCATION)_COUNT for Tigerlake (Tapani)
- Support creating LMEM objects in kernel (Matt A)
- Adjust the location of RING_MI_MODE in the context image for TGL (Chris)
- Handle AUX interrupts for TC ports (Matt R)
- Add support for devices without mappable GGTT aperture (Daniele)
- Rename "inject_load_failure" module parameter to "inject_probe_failure" (Janusz)
- Handle fused off HDCP, FBC, DMC and DSC (Jose)
- Add support to one DP-MST stream on Tigerlake (Lucas)
- Add HuC firmware (and GuC) for TGL (Daniele)
- Allow ICL+ DSI on any pipe (Ville)

- Check some transcoder timing minimum limits (Ville)
- Don't set queue_priority_hint if we don't kick the submission (Chris)
- Introduce barrier pulses along engines to flush idle/in-flight requests (Chris)
- Drop assertion that ce->pin_mutex guards state updates (Chris)
- Cancel banned contexts on schedule-out (Chris)
- Cancel contexts when hangchecking is disabled (Chris)
- Catch GTT fault errors for gen11+ planes (Matt R)
- Print in debugfs if PSR is not enabled because of sink (Jose)
- Do not set MOCS control values on dgfx (Lucas)
- Setup io-mapping for LMEM (Abdiel)
- Support kernel mapping of LMEM objects (Abdiel)
- Add LMEM selftests (Matt A)
- Initialise PMU spinlock before registering (Chris)
- Clear DKL_TX_PMD_LANE_SUS before program TC voltage swing (Jose)
- Flip interpretation of ips fmin/fmax to max rps (Chris)
- Add VBT compression parameter block definition (Jani)
- Limit the blitter sizes to ensure low preemption latency (Chris)
- Fixup block_size rounding on BLT (Matt A)
- Don't try to place HWS in non-existing mappable region (Michal Wa)
- Don't allocate the ring in stolen if we lack aperture (Matt A)
- Add AUX B & C to DC_OFF_POWER_DOMAINS for Tigerlake (Matt R)
- Avoid HPD poll detect triggering a new detect cycle (Imre)
- Document the userspace fail with possible_crtcs (Ville)
- Drop lrc header page now unused by GuC (Daniele)
- Do not switch aux to TBT mode for non-TC ports (Jose)

- Restructure code to avoid depending on i915 but smaller structs (Chris, Tvrtko, Andi)
- Remove pm park/unpark notifications (Chris)
- Avoid lockdep cross-contamination between object types (Chris)
- Restructure DSC code (Jani)
- Fix dead locking in early workload shadow (Zhenyu)
- Split the legacy submission backend from the common CS ring buffer (Chris)
- Move intel_engine_context_in/out into intel_lrc.c (Tvrtko)
- Describe perf/wakeref structure members in documentation (Anna)
- Update renamed header files names in documentation (Anna)
- Add debugs to distingiush a cd2x update from a full cdclk pll update (Ville)
- Rework atomic global state locking (Ville)
- Allow planes to declare their minimum acceptable cdclk (Ville)
- Eliminate skl_check_pipe_max_pixel_rate() and simplify skl_max_scale() (Ville)
- Making loglevel of PSR2/SU logs same (Ap)
- Capture aux page table error register (Lionel)
- Add is_dgfx to device info (Jose)
- Split gen11_irq_handler to make it shareable (Lucas)
- Encapsulate kconfig constant values inside boolean predicates (Chris)
- Split memory_region initialisation into its own file (Chris)
- Use _PICK() for CHICKEN_TRANS() and add CHICKEN_TRANS_D (Ville)
- Add perf helper macros for comparing with whitelisted registers (Umesh)
- Fix i915_inject_load_error() name to read *_probe_* (Janusz)
- Drop unused AUX register offsets (Matt R)
- Provide more information on DP AUX failures (Matt R)
- Add GAM/SFC instdone to error state (Mika)
- Always track callers to intel_rps_mark_interactive() (Chris)
- Nuke 'mode' argument to intel_get_load_detect_pipe() (Ville)
- Simplify LVDS crtc_mask and pipe_mask setup (Ville)
- Stop frobbing crtc->base.mode (Ville)
- Do s/crtc_mask/pipe_mask/ (Ville)
- Split detaching and removing the vma (Chris)

- Selftest improvements (Chris, Tvrtko, Mika, Matt A, Lionel)
- GuC code improvements (Rob, Andi, Daniele)

- Check against i915_selftest only under CONFIG_SELFTEST (Chris)
- Refine occupancy test in kill_context() (Chris)
- Start kthreads before stopping (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101104718.GA14323@jlahtine-desk.ger.corp.intel.com
2019-11-04 09:57:28 +10:00
Dave Airlie
904ce198dd drm/tegra: Changes for v5.5-rc1
The bulk of these changes is the addition of DisplayPort support for
 Tegra210, Tegra186 and Tegra194. I've been running versions of this for
 about three years now, so I'd consider these changes to be pretty
 mature. These changes also unify the existing eDP support with the DP
 support since the programming is very similar, except for a few steps
 that can be easily parameterized.
 
 The rest are a couple of fixes all over the place for minor issues, as
 well as some work to support the IOMMU-backed DMA API, which in the end
 turned out to also clean up a number of cases where the DMA API was not
 being used correctly.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl29isQTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoSXBEACTkVCNwi6xq2mqYl2OnxMEEGuFvMgH
 bZrXPm54Md2qM0IBOXCM8GDl6aO6iwj8q+RVADSnU0XlravfTGtVPhLLNbBBgIMy
 wjg5Ib6/aN1zuHTvPyvvx++LIeiG2L6PtirdCVPA9GgFCIwVt4xgw35Kekk9lHEt
 hia9g9rsfuNUOSKQsBXRbgk/yxlUdk/rM/2tdWQgbpRPNttgc9wrp581jjU2Y+lG
 dSkqri2Dv1loNyRAv/tRQgeA+td+lYR6zl5emsukhe4ECPvG4XaqgN+D33Eo+kDx
 2MiBJAwefboJV/VjDm+dfR1d/1Qa4XCUEUMgR6P1LXgX0+5jNLOo3InPaKpwDxBw
 wvESiibJiLiL3KdJfjrVpDsYDbOt1GUK2fmkLwoH4ihAl674Fvo8M/31P0czxK8X
 v5JCm7POhB3vSf/chMoQEJcfklu9NzAUw8J5SJC2Oaj13uhOqAzN+uIrfe7qemtm
 W4E2bj50EI+IEVbf8DRfuDCcE/eB35XJMBdip4HwOFCQPeRGGN7EsM49w+TQ9fba
 0+GbyY1glxJyUyGN0v/5Lu2IYfbvdOm51pWTlvUW4TS5Lv68rJpiE/lEDmFqHPE2
 69cOLe843K4mGIh1wbmT2G+dQKf/PNd/mrQHcMuUK2au849lVQeUE9xz77NuJTeK
 3lPim7/95m8eSQ==
 =jU8e
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-5.5-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.5-rc1

The bulk of these changes is the addition of DisplayPort support for
Tegra210, Tegra186 and Tegra194. I've been running versions of this for
about three years now, so I'd consider these changes to be pretty
mature. These changes also unify the existing eDP support with the DP
support since the programming is very similar, except for a few steps
that can be easily parameterized.

The rest are a couple of fixes all over the place for minor issues, as
well as some work to support the IOMMU-backed DMA API, which in the end
turned out to also clean up a number of cases where the DMA API was not
being used correctly.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191102140116.3860545-1-thierry.reding@gmail.com
2019-11-04 09:47:54 +10:00
Dave Airlie
633aa7e53a drm-misc-next for 5.5:
UAPI Changes:
 -dma-buf: Introduce and revert dma-buf heap (Andrew/John/Sean)
 
 Cross-subsystem Changes:
 - None
 
 Core Changes:
 -dma-buf: add dynamic mapping to allow exporters to choose dma_resv lock
 	  state on mmap/munmap (Christian)
 -vram: add prepare/cleanup fb helpers to vram helpers (Thomas)
 -ttm: always keep bo's on the lru + ttm cleanups (Christian)
 -sched: allow a free_job routine to sleep (Steven)
 -fb_helper: remove unused drm_fb_helper_defio_init() (Thomas)
 
 Driver Changes:
 -bochs/hibmc/vboxvideo: Use new vram helpers for prepare/cleanup fb (Thomas)
 -amdgpu: Implement dma-buf import/export without drm helpers (Christian)
 -panfrost: Simplify devfreq integration in driver (Steven)
 
 Cc: Christian König <christian.koenig@amd.com>
 Cc: Thomas Zimmermann <tzimmermann@suse.de>
 Cc: Steven Price <steven.price@arm.com>
 Cc: Andrew F. Davis <afd@ti.com>
 Cc: John Stultz <john.stultz@linaro.org>
 Cc: Sean Paul <seanpaul@chromium.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl27NYYACgkQcywAJXLc
 r3k7SQgAy7MbT7MHg1NkObnWFKwbNxA0FuRV7HVuQ5AiVA5fbehGECNVI1hFZE3D
 kCyL5zRgzfrbBjI9zqclonXPmjPbD//f+ufUZJ2EaWHfE5k7LUYIEunpgWlCEgUR
 qqeuqjvx2+NY3gLZW6D8BIrUW79cKbggBvDa9QeE4aoMiI7/F3lpNog5LNo7TWCQ
 4SGgpDqtcJ2eSBneX80zLLVnI1CKfCSiWheZVoqCTRN5bfUftGwhbXb3N/JipG37
 cCblVR7D8FR7z0MQUtq2ql76tCn5SJJqloujkmUU06quYBHR5K1deB5BP+8HI1Fw
 /XMqWHFo0uX7h4hFIt1MVIJ92U+b+w==
 =ViNo
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2019-10-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.5:

UAPI Changes:
-dma-buf: Introduce and revert dma-buf heap (Andrew/John/Sean)

Cross-subsystem Changes:
- None

Core Changes:
-dma-buf: add dynamic mapping to allow exporters to choose dma_resv lock
	  state on mmap/munmap (Christian)
-vram: add prepare/cleanup fb helpers to vram helpers (Thomas)
-ttm: always keep bo's on the lru + ttm cleanups (Christian)
-sched: allow a free_job routine to sleep (Steven)
-fb_helper: remove unused drm_fb_helper_defio_init() (Thomas)

Driver Changes:
-bochs/hibmc/vboxvideo: Use new vram helpers for prepare/cleanup fb (Thomas)
-amdgpu: Implement dma-buf import/export without drm helpers (Christian)
-panfrost: Simplify devfreq integration in driver (Steven)

Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Steven Price <steven.price@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031193015.GA243509@art_vandelay
2019-11-04 09:28:51 +10:00
Joonas Lahtinen
1883e2999f drm/i915: Update DRIVER_DATE to 20191101
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-01 12:41:13 +02:00
Chris Wilson
e5661c6ab0 drm/i915/selftests: Start kthreads before stopping
An interesting observation made with our parallel selftests was that on
our small/single cpu systems we would call kthread_stop() before the
kthreads were spawned. If this happens, the kthread is never run at all;
completely bypassing the test.

A simple yield() from the parent will ensure that all children have the
opportunity to start before we reap them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101084940.31838-1-chris@chris-wilson.co.uk
2019-11-01 10:12:29 +00:00
Chris Wilson
292a27b0a8 drm/i915/lmem: Check against i915_selftest only under CONFIG_SELFTEST
The i915_selftest module parameters only exist when
CONFIG_DRM_I915_SELFTEST is set.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101095147.9769-1-chris@chris-wilson.co.uk
2019-11-01 10:12:29 +00:00
Thierry Reding
84db889e6d drm/tegra: Unconditionally select IOMMU_IOVA
Currently configurations can be generated where IOMMU_SUPPORT is
disabled but IOMMU_IOVA is built as a module and DRM_TEGRA as built-in.
In such a case, the symbols guarded by IOMMU_IOVA will not be available
when linking the Tegra DRM driver and cause a linking failure.

Simplify this by unconditionally selecting IOMMU_IOVA, which makes sure
that it will be forced to =y if DRM_TEGRA=y. Technically we can now get
IOMMU_IOVA code built-in even if we don't use it (Tegra DRM only uses it
when IOMMU_SUPPORT is also enabled), but such configuration are of a
mostly academic nature. In all practical configurations we want IOMMU
support anyway.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-01 10:49:29 +01:00
Thierry Reding
c8a2036474 gpu: host1x: Unconditionally select IOMMU_IOVA
Currently configurations can be generated where IOMMU_SUPPORT is
disabled but IOMMU_IOVA is built as a module and HOST1X as built-in. In
such a case, the symbols guarded by IOMMU_IOVA will not be available
when linking the host1x driver and cause a linking failure.

Simplify this by unconditionally selecting IOMMU_IOVA, which makes sure
that it will be forced to =y if HOST1X=y. Technically we can now get
IOMMU_IOVA code built-in even if we don't use it (host1x only uses it
when IOMMU_SUPPORT is also enabled), but such configuration are of a
mostly academic nature. In all practical configurations we want IOMMU
support anyway.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-01 10:49:17 +01:00
Chris Wilson
4a31741521 drm/i915/gem: Refine occupancy test in kill_context()
Don't just look at the very last request in a queue when deciding if we
need to evict the context from the GPU, as that request may still be in
the submission queue while the rest of the context is running!

Instead, walk back along the queued requests looking for the active
request and checking that.

Fixes: 2e0986a58cc4 ("drm/i915/gem: Cancel contexts when hangchecking is disabled")
Testcase: igt/gem_ctx_persistence/queued
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031090104.22245-1-chris@chris-wilson.co.uk
2019-11-01 09:44:48 +00:00
Joonas Lahtinen
2b73b3503b drm/i915: Update DRIVER_DATE to 20191101
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-11-01 09:04:29 +02:00
Matthew Auld
1629224324 drm/i915/lmem: add the fake lmem region
Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.

To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.

eg. memmap=2G$16G i915.fake_lmem_start=0x400000000

v2: make fake_lmem_start an i915 modparam

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com
2019-10-31 20:41:47 +00:00
José Roberto de Souza
4974826482 drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: e9b7e1422d40 ("drm/i915: Sanitize the terminology used for TypeC port modes")
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029011014.286885-1-jose.souza@intel.com
2019-10-31 10:22:22 -07:00
Daniele Ceraolo Spurio
034982cff1 drm/i915/guc: drop guc shared area
Recent GuC doesn't require the shared area. We still have one user in
i915 (engine reset via guc) because we haven't updated the command to
match the current guc submission flow [1]. Since the flow in guc is
about to change again, just disable the command for now and add a note
that we'll implement it as part of the new flow.

[1] https://patchwork.freedesktop.org/patch/295038/

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-2-daniele.ceraolospurio@intel.com
2019-10-31 16:47:23 +00:00
Daniele Ceraolo Spurio
9f37940756 drm/i915: drop lrc header page
Recent GuC binaries (including all the ones we're currently using)
don't require this shared area anymore, having moved the relevant
entries into the stage pool instead. i915 itself doesn't write
anything into it either, so we can safely drop it.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031013040.25803-1-daniele.ceraolospurio@intel.com
2019-10-31 16:47:22 +00:00
Chris Wilson
dde01d9435 drm/i915: Split detaching and removing the vma
In order to keep the assert_bind_count() valid, we need to hold the vma
page reference until after we drop the bind count. However, we must also
keep the drm_mm_remove_node() as the last action of i915_vma_unbind() so
that it serialises with the unlocked check inside i915_vma_destroy(). So
we need to split up i915_vma_remove() so that we order the detach, drop
pages and remove as required during unbind.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112067
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030192159.18404-1-chris@chris-wilson.co.uk
2019-10-31 14:52:19 +00:00
Chris Wilson
164a412886 drm/i915/selftests: Pretty print the i915_active
If the idle_pulse fails to flush the i915_active, dump the tree to see
if that has any clues.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031101116.19894-1-chris@chris-wilson.co.uk
2019-10-31 14:43:14 +00:00
Chris Wilson
1db257c55f drm/i915/selftests: Assert that the idle_pulse is sent
When checking the heartbeat pulse, we expect it to have been sent by the
time we have slept. We can verify this by checking the engine serial
number to see if that matches the predicted pulse serial. It will always
be true if, and only if, the pulse was sent by itself (as designed by
the test).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191031094259.23028-1-chris@chris-wilson.co.uk
2019-10-31 14:43:09 +00:00
Ville Syrjälä
29b27657db drm/i915/mst: Document the userspace fail with possible_crtcs
To avoid accidentally breaking things in the future add a
comment explaining why we misconfigure the pipe_mask.

Also toss in a TODO for investigating a single encoder
approach as opposed to the encoder-per-pipe approach.

v2: Drop a bogus TODO comment

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-6-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-31 16:08:11 +02:00
Ville Syrjälä
34053ee189 drm/i915: Simplify pipe_mask setup even further
Just set pipe_mask=~0 for the non-special cases where any pipe
will do. intel_encoder_possible_crtcs() will anyway drop out
anything that doesn't exist.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-5-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-31 16:08:11 +02:00
Ville Syrjälä
4d19505ed2 drm/i915: Allow ICL+ DSI on any pipe
There are no longer any pipe<->DSI port limitations on icl+.
Populate the pipe_mask accordingly.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-4-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-10-31 16:08:11 +02:00
Ville Syrjälä
981329ce3c drm/i915: s/crtc_mask/pipe_mask/
Rename the encoder->crtc_mask to encoder->pipe_mask to better
reflect what it actually contains.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-3-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-10-31 16:08:10 +02:00
Ville Syrjälä
2b0b27418a drm/i915: Simplify LVDS crtc_mask setup
We don't need to special case PCH vs. gen4 when setting up the LVDS
crtc_mask. Just claim pipes A|B|C work and
intel_encoder_possible_crtcs() will drop out any crtc that doesn't
exist.

v2: Put the special case first to match what most other encoders do

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-31 16:07:58 +02:00
Daniele Ceraolo Spurio
2d9c190441 drm/i915/uc: define GuC and HuC binaries for TGL
GuC 35.2.0 and HuC 7.0.3 are the first production releases for TGL.
GuC 35.2 for Gen12 is interface-compatible with 33.0 on older Gens,
because the differences are related to additional blocks/commands in
the interface to support new Gen12 features. These parts of the
interface will be added when the relevant features are enabled.

v2: fix typos (Michal)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191026003507.21769-1-daniele.ceraolospurio@intel.com
2019-10-30 14:33:25 -07:00
Sean Paul
fae7d7d5f3 Revert "dma-buf: Add dma-buf heaps framework"
This reverts commit a69b0e855d3fd278ff6f09a23e1edf929538e304.

This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.

[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements

Fixes: a69b0e855d3f ("dma-buf: Add dma-buf heaps framework")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-6-sean@poorly.run
2019-10-30 16:41:49 -04:00
Sean Paul
837324d435 Revert "dma-buf: heaps: Add heap helpers"
This reverts commit 7b87ea704fd9606eaafa9150116536d72f5c4b1f.

This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.

[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements

Fixes: 7b87ea704fd9 ("dma-buf: heaps: Add heap helpers")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-5-sean@poorly.run
2019-10-30 16:41:43 -04:00
Sean Paul
d59c5e0250 Revert "dma-buf: heaps: Add system heap to dmabuf heaps"
This reverts commit 47a32f9c12266d450b92089148c6039591bd9909.

This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.

[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements

Fixes: 47a32f9c1226 ("dma-buf: heaps: Add system heap to dmabuf heaps")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-4-sean@poorly.run
2019-10-30 16:41:33 -04:00
Sean Paul
2e7f7cb2b5 Revert "dma-buf: heaps: Add CMA heap to dmabuf heaps"
This reverts commit 43d7238fb9ac897b29912368b3359e72bae469c4.

This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.

[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements

Fixes: 43d7238fb9ac ("dma-buf: heaps: Add CMA heap to dmabuf heaps")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-3-sean@poorly.run
2019-10-30 16:41:23 -04:00
Sean Paul
a262ef0436 Revert "kselftests: Add dma-heap test"
This reverts commit ab87cc9754cdeb373c8ac030ac7aed92f450b767.

This patchset doesn't meet the UAPI requirements set out in [1] for the DRM
subsystem. Once the userspace component is reviewed and ready for merge
we can try again.

[1]- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-uapi.html#open-source-userspace-requirements

Fixes: ab87cc9754cd ("kselftests: Add dma-heap test")
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030203003.101156-2-sean@poorly.run
2019-10-30 16:40:13 -04:00
Ville Syrjälä
4e380d080b drm/i915: Stop frobbing crtc->base.mode
The core no longer uses drm_crtc_state::mode with atomic drivers,
so let's stop frobbing it in the driver. For the user mode readout
we'll just use an on stack mode.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029145526.10308-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-10-30 18:09:00 +02:00
Ville Syrjälä
25f899544f drm/i915: Nuke 'mode' argument to intel_get_load_detect_pipe()
We always pass mode==NULL to intel_get_load_detect_pipe(). Remove
the pointless function argument.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029132323.18113-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2019-10-30 18:04:27 +02:00