IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 6c21660fe221a15c789dee2bc2fd95516bc5aeaf ]
In the vlan_changelink function, a loop is used to parse the nested
attributes IFLA_VLAN_EGRESS_QOS and IFLA_VLAN_INGRESS_QOS in order to
obtain the struct ifla_vlan_qos_mapping. These two nested attributes are
checked in the vlan_validate_qos_map function, which calls
nla_validate_nested_deprecated with the vlan_map_policy.
However, this deprecated validator applies a LIBERAL strictness, allowing
the presence of an attribute with the type IFLA_VLAN_QOS_UNSPEC.
Consequently, the loop in vlan_changelink may parse an attribute of type
IFLA_VLAN_QOS_UNSPEC and believe it carries a payload of
struct ifla_vlan_qos_mapping, which is not necessarily true.
To address this issue and ensure compatibility, this patch introduces two
type checks that skip attributes whose type is not IFLA_VLAN_QOS_MAPPING.
Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240118130306.1644001-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c1069fa42872f95cf3c6fedf80723d391e12d57 ]
The first message to firmware may fail if the device is undergoing FLR.
The driver has some recovery logic for this failure scenario but we must
wait 100 msec for FLR to complete before proceeding. Otherwise the
recovery will always fail.
Fixes: ba02629ff6cb ("bnxt_en: log firmware status on firmware init failure")
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240117234515.226944-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbc153fd3c142909e564bb256da087e13fbf239c ]
A crash was found when dumping SMC-D connections. It can be reproduced
by following steps:
- run nginx/wrk test:
smc_run nginx
smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL>
- continuously dump SMC-D connections in parallel:
watch -n 1 'smcss -D'
BUG: kernel NULL pointer dereference, address: 0000000000000030
CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55
RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x66/0x150
? exc_page_fault+0x69/0x140
? asm_exc_page_fault+0x26/0x30
? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
? __kmalloc_node_track_caller+0x35d/0x430
? __alloc_skb+0x77/0x170
smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
smc_diag_dump+0x26/0x60 [smc_diag]
netlink_dump+0x19f/0x320
__netlink_dump_start+0x1dc/0x300
smc_diag_handler_dump+0x6a/0x80 [smc_diag]
? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
sock_diag_rcv_msg+0x121/0x140
? __pfx_sock_diag_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
sock_diag_rcv+0x28/0x40
netlink_unicast+0x22a/0x330
netlink_sendmsg+0x1f8/0x420
__sock_sendmsg+0xb0/0xc0
____sys_sendmsg+0x24e/0x300
? copy_msghdr_from_user+0x62/0x80
___sys_sendmsg+0x7c/0xd0
? __do_fault+0x34/0x160
? do_read_fault+0x5f/0x100
? do_fault+0xb0/0x110
? __handle_mm_fault+0x2b0/0x6c0
__sys_sendmsg+0x4d/0x80
do_syscall_64+0x69/0x180
entry_SYSCALL_64_after_hwframe+0x6e/0x76
It is possible that the connection is in process of being established
when we dump it. Assumed that the connection has been registered in a
link group by smc_conn_create() but the rmb_desc has not yet been
initialized by smc_buf_create(), thus causing the illegal access to
conn->rmb_desc. So fix it by checking before dump.
Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
From: Kevin Hao <haokexin@gmail.com>
[ Upstream commit 8fb7b723924cc9306bc161f45496497aec733904 ]
The kernel thread function ksmbd_conn_handler_loop() invokes
the try_to_freeze() in its loop. But all the kernel threads are
non-freezable by default. So if we want to make a kernel thread to be
freezable, we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6e9a44e99603fe10e1d78901fdd97681a539612 ]
If existing lease state and request state are same, don't increment
epoch in create context.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6fc0a265e1b932e5e97a038f99e29400a93baad0 ]
smb2_set_ea() can be called in parent inode lock range.
So add get_write argument to smb2_set_ea() not to call nested
mnt_want_write().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb05367a66a9990d2c561282f5620bb1dbe40c28 ]
If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.
This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)
i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22e111ed6c83dcde3037fc81176012721bc34c0b upstream.
We should never lock two subdirectories without having taken
->s_vfs_rename_mutex; inode pointer order or not, the "order" proposed
in 28eceeda130f "fs: Lock moved directories" is not transitive, with
the usual consequences.
The rationale for locking renamed subdirectory in all cases was
the possibility of race between rename modifying .. in a subdirectory to
reflect the new parent and another thread modifying the same subdirectory.
For a lot of filesystems that's not a problem, but for some it can lead
to trouble (e.g. the case when short directory contents is kept in the
inode, but creating a file in it might push it across the size limit
and copy its contents into separate data block(s)).
However, we need that only in case when the parent does change -
otherwise ->rename() doesn't need to do anything with .. entry in the
first place. Some instances are lazy and do a tautological update anyway,
but it's really not hard to avoid.
Amended locking rules for rename():
find the parent(s) of source and target
if source and target have the same parent
lock the common parent
else
lock ->s_vfs_rename_mutex
lock both parents, in ancestor-first order; if neither
is an ancestor of another, lock the parent of source
first.
find the source and target.
if source and target have the same parent
if operation is an overwriting rename of a subdirectory
lock the target subdirectory
else
if source is a subdirectory
lock the source
if target is a subdirectory
lock the target
lock non-directories involved, in inode pointer order if both
source and target are such.
That way we are guaranteed that parents are locked (for obvious reasons),
that any renamed non-directory is locked (nfsd relies upon that),
that any victim is locked (emptiness check needs that, among other things)
and subdirectory that changes parent is locked (needed to protect the update
of .. entries). We are also guaranteed that any operation locking more
than one directory either takes ->s_vfs_rename_mutex or locks a parent
followed by its child.
Cc: stable@vger.kernel.org
Fixes: 28eceeda130f "fs: Lock moved directories"
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e022216dcd248326a5bb95609d12a6815bca4e2 upstream.
For error handling path in ubifs_symlink(), inode will be marked as
bad first, then iput() is invoked. If inode->i_link is initialized by
fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't
be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error
handling path, because make_bad_inode() has changed 'inode->i_mode' as
'S_IFREG'.
Following kmemleak is easy to be reproduced by injecting error in
ubifs_jnl_update() when doing symlink in encryption scenario:
unreferenced object 0xffff888103da3d98 (size 8):
comm "ln", pid 1692, jiffies 4294914701 (age 12.045s)
backtrace:
kmemdup+0x32/0x70
__fscrypt_encrypt_symlink+0xed/0x1c0
ubifs_symlink+0x210/0x300 [ubifs]
vfs_symlink+0x216/0x360
do_symlinkat+0x11a/0x190
do_syscall_64+0x3b/0xe0
There are two ways fixing it:
1. Remove make_bad_inode() in error handling path. We can do that
because ubifs_evict_inode() will do same processes for good
symlink inode and bad symlink inode, for inode->i_nlink checking
is before is_bad_inode().
2. Free inode->i_link before marking inode bad.
Method 2 is picked, it has less influence, personally, I think.
Cc: stable@vger.kernel.org
Fixes: 2c58d548f570 ("fscrypt: cache decrypted symlink target in ->i_link")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream.
When mc146818_avoid_UIP() fails to return a valid value, this is because
UIP didn't clear in the timeout period. Adjust the return code in this
case to -ETIMEDOUT.
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: <stable@vger.kernel.org>
Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time")
Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream.
There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.
Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.
Also see the Link tags below.
Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:
- drivers/spi/spi-au1550.c
- drivers/spi/spi-fsl-spi.c
Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.
That said, remove all related pieces of DMA mapping code from mmc_spi.
Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d0c8d0aef6355660b6775d57ccd5d4ea2e15802 upstream.
Field Firmware Update (ffu) may use close-ended or open ended sequence.
Each such sequence is comprised of a write commands enclosed between 2
switch commands - to and from ffu mode. So for the close-ended case, it
will be: cmd6->cmd23-cmd25-cmd6.
Some host controllers however, get confused when multi-block rw is sent
without sbc, and may generate auto-cmd12 which breaks the ffu sequence.
I encountered this issue while testing fwupd (github.com/fwupd/fwupd)
on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad.
Instead of a quirk, or hooking the request function of the msm ops,
it would be better to fix the ioctl handling and make it use mrq.sbc
instead of issuing SET_BLOCK_COUNT separately.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5889d6ede53bc17252f79c142387e007224aa554 upstream.
The code currently leaks the absolute path of the ABI files into the
rendered documentation.
There exists code to prevent this, but it is not effective when an
absolute path is passed, which it is when $srctree is used.
I consider this to be a minimal, stop-gap fix; a better fix would strip
off the actual prefix instead of hacking it off with a regex.
Link: https://mastodon.social/@vegard/111677490643495163
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream.
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204f9ed4bad6293933179517624143b8f412347c upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54524b6987d1fffe64cbf3dded1b2fa6b903edf9 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b956999bf725fd62613f719c3178fdbee6e5f47 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d4b5d7a37bdd63a5a3371b988744b060d5bb86f upstream.
In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.
The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa09a5bccd8e224d917afdb4c278fc66aacde4d upstream.
In preparation for subsequent changes, split async_schedule_node_domain()
in two pieces so as to allow the bottom part of it to be called from a
somewhat different code path.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 735ae74f73e55c191d48689bd11ff4a06ea0508f upstream.
When running with narrow firmware (64-bit kernel using a 32-bit
firmware), extend PDC addresses into the 0xfffffff0.00000000
region instead of the 0xf0f0f0f0.00000000 region.
This fixes the power button on the C3700 machine in qemu (64-bit CPU
with 32-bit firmware), and my assumption is that the previous code was
really never used (because most 64-bit machines have a 64-bit firmware),
or it just worked on very old machines because they may only decode
40-bit of virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b89b6a863dd53bc70d8e52d50f9cfaef8ef5e9c9 upstream.
Protect WP accesses such that multiple threads queueing buffers for
incoming data do not race.
Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
__local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
take irqsave lock after TRE is generated to avoid running write_unlock_bh
when irqsave lock is held.
Cc: stable@vger.kernel.org
Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01bd694ac2f682fb8017e16148b928482bc8fa4b upstream.
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com
[mani: added fixes tag and cc'ed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1a9ae45736989c972a8d1c151bc390678ae6205 upstream.
max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
+-> free_area_init()
+-> memmap_init()
+-> memmap_init_zone_range()
+-> init_unavailable_range()
Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:
> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...
Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.
Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e242e9c144050ed120cf666642ba96b7c4462a4c upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63fe4 ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efa5fe19c0a9199f49e36e1f5242ed5c88da617d upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7ddd ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d07f951903fa9922c375b8ab1ce81b18a0034e3b upstream.
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing.
Fixes: 0200f3ecc196 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78aafb3884f6bc6636efcc1760c891c8500b9922 upstream.
There is a dead-lock in the hwrng device read path. This triggers
when the user reads from /dev/hwrng into memory also mmap-ed from
/dev/hwrng. The resulting page fault triggers a recursive read
which then dead-locks.
Fix this by using a stack buffer when calling copy_to_user.
Reported-by: Edward Adam Davis <eadavis@qq.com>
Reported-by: syzbot+c52ab18308964d248092@syzkaller.appspotmail.com
Fixes: 9996508b3353 ("hwrng: core - Replace u32 in driver API with byte array")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream.
An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes
fails with the following error messaged in the dmesg log:
Invalid LZO compressed length
That happens because when compressing/decompressing the image, the
synchronization between the control thread and the compress/decompress/crc
thread is based on a relaxed ordering interface, which is unreliable, and the
following situation may occur:
CPU 0 CPU 1
save_image_lzo lzo_compress_threadfn
atomic_set(&d->stop, 1);
atomic_read(&data[thr].stop)
data[thr].cmp = data[thr].cmp_len;
WRITE data[thr].cmp_len
Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4,
wrong cmp_len is loaded.
To maintain data consistency between the two threads, use the acquire/release
variants of atomic set and read operations.
Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Co-developed-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
[ rjw: Subject rewrite and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b0122aaa800b021e36027d7f29e206f87c761d6 upstream.
The value set as scrub_speed_max accepts size with suffixes
(k/m/g/t/p/e) but we should still validate it for trailing characters,
similar to what we do with chunk_size_store.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c784d624819acbeefb0018bac89e632467cca5a upstream.
The ext4 filesystem tracks the trim status of blocks at the group
level. When an entire group has been trimmed then it is marked as
such and subsequent trim invocations with the same minimum trim size
will not be attempted on that group unless it is marked as able to be
trimmed again such as when a block is freed.
Currently the last group can't be marked as trimmed due to incorrect
logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed
to return the zero based index of the last cluster in a group. This is
then used by ext4_try_to_trim_range() to determine if the trim
operation spans the entire group and as such if the trim status of the
group should be recorded.
ext4_last_grp_cluster() takes a 0 based group index, thus the valid
values for grp are 0..(ext4_get_groups_count - 1). Any group index
less than (ext4_get_groups_count - 1) is not the last group and must
have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need
to calculate the number of clusters based on the number of blocks in
the group. Finally subtract 1 from the number of clusters as zero
based indexing is expected. Rearrange the function slightly to make
it clear what we are calculating and returning.
Reproducer:
// Create file system where the last group has fewer blocks than
// blocks per group
$ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191
$ mount /dev/nvme0n1 /mnt
Before Patch:
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group not marked as trimmed so second invocation still discards blocks
$ fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
After Patch:
fstrim -v /mnt
/mnt: 25.9 MiB (27156480 bytes) trimmed
// Group marked as trimmed so second invocation DOESN'T discard any blocks
fstrim -v /mnt
/mnt: 0 B (0 bytes) trimmed
Fixes: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a0080af84d3fb2423f0b3b55eff666f545eb097 upstream.
In order to avoid unnecessary pollution of the global symbol namespace
move the core/library functions into a specific namespace and import
that into the various specific device drivers that use them.
For more information see https://lwn.net/Articles/760045/
An alternative here would be to conclude that we are unlikely to see
support for the other ad7091r parts in the near future and just merge
the two modules into one supporting just the i2c -5 variant.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220130205701.334592-3-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ee36710912b2075c417100a8acc642c9c6496501 ]
Calling ufshcd_hba_exit() from a function that is called asynchronously
from ufshcd_init() is wrong because this triggers multiple race
conditions. Instead of calling ufshcd_hba_exit(), log an error message.
Reported-by: Daniel Mentz <danielmentz@google.com>
Fixes: 1d337ec2f35e ("ufs: improve init sequence")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-3-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5c24d94512f1b288262beda4d3dcb9629222fc7 ]
__dma_async_device_channel_register() can fail. In case of failure,
chan->local is freed (with free_percpu()), and chan->local is nullified.
When dma_async_device_unregister() is called (because of managed API or
intentionally by DMA controller driver), channels are unconditionally
unregistered, leading to this NULL pointer:
[ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
[...]
[ 1.484499] Call trace:
[ 1.486930] device_del+0x40/0x394
[ 1.490314] device_unregister+0x20/0x7c
[ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0
Look at dma_async_device_register() function error path, channel device
unregistration is done only if chan->local is not NULL.
Then add the same condition at the beginning of
__dma_async_device_channel_unregister() function, to avoid NULL pointer
issue whatever the API used to reach this function.
Fixes: d2fb0a043838 ("dmaengine: break out channel registration")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231213160452.2598073-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e71c5c89bcb165a02df35325aa13d1ee40112401 ]
The ADC needs a voltage reference to work correctly.
Users can provide an external voltage reference or use the chip internal
reference to operate the ADC.
The availability of an in chip reference for the ADC saves the user from
having to supply an external voltage reference, which makes the external
reference an optional property as described in the device tree
documentation.
Though, to use the internal reference, it must be enabled by writing to
the configuration register.
Enable AD7091R internal voltage reference if no external vref is supplied.
Fixes: 260442cc5be4 ("iio: adc: ad7091r5: Add scale and external VREF support")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020e71c7ffc25dfe29ed9be6c2d39af7bd7f661f ]
AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.
Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.
Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added.
Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC")
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 ]
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 020e71c7ffc2 ("iio: adc: ad7091r: Allow users to configure device events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bebd186442a7d703b796784db7495129cc3e70 ]
When smb2 leases is disable, ksmbd can send oplock break notification
and cause wait oplock break ack timeout. It may appear like hang when
accessing a directory. This patch make only v2 leases handle the
directory.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38d20c62903d669693a1869aa68c4dd5674e2544 ]
The race is between the handling of a new TCP connection and
its disconnection. It leads to UAF on `struct tcp_transport` in
ksmbd_tcp_new_connection() function.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22991
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e470163d96df8db6c4fa0f484e4a229edb903d ]
If client send invalid mech token in session setup request, ksmbd
validate and make the error if it is invalid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22890
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d592a9158a112d419f341f035d18d02f8d232def ]
When file is changed using notepad on read-only share(read_only = yes in
ksmbd.conf), There is a problem where existing data is truncated.
notepad in windows try to O_TRUNC open(FILE_OVERWRITE_IF) and all data
in file is truncated. This patch don't allow O_TRUNC open on read-only
share and add KSMBD_TREE_CONN_FLAG_WRITABLE check in smb2_set_info().
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf9bedfc3c47d24bb0de386f808f925dc52863e ]
The ppace array is not freed if one of the init_acl_state() calls inside
parse_dacl() fails. At the moment the function may fail only due to the
memory allocation errors so it's highly unlikely in this case but
nevertheless a fix is needed.
Move ppace allocation after the init_acl_state() calls with proper error
handling.
Found by Linux Verification Center (linuxtesting.org).
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d.
The original set [1][2] was expected to undo a suboptimal fix in [2], and
replace it with a better fix [1]. However, as reported by Dan Moulding [2]
causes an issue with raid5 with journal device.
Revert [2] for now to close the issue. We will follow up on another issue
reported by Juxiao Bi, as [2] is expected to fix it. We believe this is a
good trade-off, because the latter issue happens less freqently.
In the meanwhile, we will NOT revert [1], as it contains the right logic.
[1] commit d6e035aad6c0 ("md: bypass block throttle for superblock update")
[2] commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
Fixes: bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Cc: stable@vger.kernel.org # v5.19+
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
