IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Avoid initializing the structs multiple times and pass the
PAT struct as a pointer, instead of a var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Pass struct header_write_args as a pointer, instead of
passing as a var;
- Initialize the psi_args struct only once.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function initializes the psi_args twice, and receives
a struct, instead of a pointer to a struct.
Clean it up.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cleanup the table_section_crc32_write_into() function
by initializing struct psi_write_args only once and by
passing the args as a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidtv_psi_ts_psi_write_into() initializes the
ts_header fields several times, and receives a struct
as argument, instead of using a pointer to struct.
Cleanup the function, in order to reduce its stack usage
and to avoid initializing the ts_header multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current event is using an undefined date. Instead, it
should be the timestamp when the EIT table was generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The service_id there should be equal to the one used
on other tables, otherwise, EIT entries won't be valid.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the service currently broadcasts just audio, change the
service type to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On normal TS streams, the NIT table has its own entry at PAT,
but not at PMT.
While here, properly handle alloc problems when creating
PMT entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The EIT header ID field should not contain the network ID, but,
instead, the service_id of the program described at EIT.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As defined at ETSI TS 101 162, original network IDs up to 0xfebf
are reserved for registration at dvb.org.
Let's use, instead, an original network ID at the range
0xff00-0xffff, as this is for private temporary usage.
As the same value is also used for the network ID,
the range 0xff01-0xffff also fits better, as values
lower than that depend if the network is used for
satellite, terrestrial, cable of CI.
While here, move the TS ID to the bridge code, where it
is used, and change its value, as it was identical to
the value previously used by network ID. While we could
keep the same value, let's change it, just to make easier
to check for the new code while reading it with DVB tools
like dvbinspector.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Place some text at EIT data, and use ISO 8859-15 encoding for
the German letter "ü" (u mit umlat) letter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Initialize the destination buffer/size and the initial
offset when creating the local var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of first zeroing all fields at the mux structs and
then filling, do some initialization for the const data
when they're created.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Right now, there's no need to access the length of some
tables. So, drop the unused functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do some cleanups at the coding style of the driver:
- remove "inline" declarations;
- use reverse xmas-tree for local var declarations;
- Adjust some indent to avoid breaking 80-cols;
- Cleanup some comments.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Minimize the number of data copies and initialization at
the code, passing them as pointers instead of duplicating
the data.
The only case where we're keeping the data copy is at
vidtv_pes_write_h(), as it needs a copy of the passed
arguments. On such case, we're being more explicit.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Initialize the fields of the arguments directly when
declaring it, and pass the args as a pointer, instead of
copying them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The sheet music used to generate the tones had a few
polyphonic notes. Due to that, its conversion to a
tones sequence had a few errors.
Also, due to a bug at the tone generator, it was missing
the pause at the initial compass.
Fix them.
While here, reduce the compass to 100bpm.
The music was converted from a Music XML file using
this small script:
<snip>
my $count = 0;
my $silent = 0;
my $note;
my $octave;
print "\t";
while (<>) {
$note = $1 if (m,\<step\>(.*)\</step\>,);
$octave = "_$1" if (m,\<octave\>(.*)\</octave\>,);
if (m,\<alter\>1\</alter\>,) {
$note .= "S";
$sharp = 1;
}
if (m,\<rest/\>,) {
$note = "SILENT";
$silent = 1;
}
if (m,\<duration\>(.*)\</duration\>,) {
printf "{ NOTE_${note}${octave}, %d},", $1 * 128 / 480;
$count++;
if ($silent || $count >= 3) {
print "\n\t";
$count = 0;
$silent = 0;
} else {
print " ";
print " " if (!$sharp);
}
$sharp = 0;
$note = "";
$octave = "";
};
};
print "\n";
</snip>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The tone generator logic were repeating the song after the
first silent. There's also a wrong logic at the note
offset calculus, which may create some noise.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While the original plan was to use the first movement of
the 5th Symphony, it was opted to use the Für Elise song,
instead.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Linux stack is too short. So, using recursive functions
is a very bad idea. Convert those into non-recursive ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, there are not checks if something gets bad during
memory allocation: it will simply use NULL pointers and
crash.
Add error path at the logic which allocates memory for the
MPEG-TS generator code, propagating the errors up to the
vidtv_bridge. Now, if something wents bad, start_streaming
will return an error that userspace can detect:
ERROR DMX_SET_PES_FILTER failed (PID = 0x2000): 12 Cannot allocate memory
and the driver doesn't crash.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Place the includes on alphabetical order;
- get rid of asm/byteorder.h;
- add bug.h at vidtv_s302m.c, as it is needed by
inux/fixp-arith.h
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some variables were only assigned once but were used in while
loops as if they had been updated at every iteration. Fix this.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A few fields used only by the tone generator in the s302m encoder
are stored in struct vidtv_encoder. Move them into
struct vidtv_s302m_ctx instead. While we are at it: fix a
checkpatch warning for long lines.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code to append a descriptor to the end of a chain is repeated
throughout the psi generator code. Extract it into its own helper
function to avoid cluttering.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement an Event Information Table (EIT) as per EN 300 468
5.2.4.
The EIT provides information in chronological order regarding
the events contained within each service.
For now only present event information is supported.
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a Network Information Table (NIT) as specified in ETSI EN 300 468.
This table conveys information relating to the physical organization of
the multiplexes carried via a given network and the characteristics of
the network itself.
It is conveyed in the output of vidtv as packets with TS PID of 0x0010
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The same constant (0xffffffff) is used in three different functions.
Extract it into a #define to avoid repetition.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The SDM630/660 SoCs (and variants) have another clock source
for the PHY, which must be set to a rate that's equal or
greater than the CSI PHY timer clock: failing to do this
will produce PHY overflows when trying to get a stream from
a very high bandwidth camera sensor and outputting no frame
or a partial one.
Since I haven't found any usecase in which the csiX_phy
clock needs to be higher than the csiXphy_timer, let's just
set the same rate on both, which seems to work just perfect.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSIPHY on SDM630/660 needs a slightly longer T_HS_CLK_MISS
configuration on lanes CFG4.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for the Qualcomm SDM630/636/660 and SDA variants' camera
subsystem. These SoCs are equipped with:
- 3x CSI PHY 3-Phase v1.0 (downstream csiphy-v3.5)
- 4x CSID v5.0
- 2x ISPIF v3.0
- 2x VFE 4.8
As a note, this camera subsystem is very similar to the one that
is found in the MSM8998/APQ8098 SoCs.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the support for VFE 4.8 in the camss-vfe-4-7 driver, as this one
really is a minor revision, requiring the very same management and
basically having the same register layout as VFE 4.7, but needing
a different QoS and DS configuration, using a different register to
enable the wm and habing the same UB size for both instances (instead
of a different size between instance 0 and 1).
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation to add support for VFE 4.8, rename these functions
by adding the vfe version that they are referred to (for example,
vfe_get_ub_size -> vfe47_get_ub_size), as these are the only ones
that will be different for the VFE version 4.8.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
for dual-camera or simply because a secondary camera is connected
to it: in this case the reset will always happen on the VFE0 ctx
of the ISPIF, which is .. useless.
Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
where to do the (or what to) reset based on the VFE line id.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This allows the timeout to be set with the LIRC_SET_REC_TIMEOUT ioctl.
The timeout was hardcoded at just over 20ms, but returned 120ms when
queried with the LIRC_GET_REC_TIMEOUT ioctl.
This also ensures the idle threshold is set correctly with a base clock
other than 8Mhz.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a user holds a button down on a remote, then no ir idle interrupt will
be generated until the user releases the button, depending on how quickly
the remote repeats. No IR is processed until that point, which means that
holding down a button may not do anything.
This also resolves an issue on a Cubieboard 1 where the IR receiver is
picking up ambient infrared as IR and spews out endless
"rc rc0: IR event FIFO is full!" messages unless you choose to live in
the dark.
Cc: stable@vger.kernel.org
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The flag V4L2_SUBDEV_FL_HAS_EVENTS is required if the subdev can
generate events. It can create events from the ctrl handler, therefore
this is required.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Comment has 'the' repeated twice. Let's clean it up.
This patch reduces checkpatch warnings for this file to nil.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
OTP data access of ov2740 need enable the streaming mode to load
and it could be done in any time, so driver need allow the OTP
data access during streaming instead of return EBUSY, this patch
try to read the OTP data out in STREAMON if OTP data is not ready
before first time streaming start.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
OTP data access of ov2740 in probe need power up, it may cause
the camera flash LED blink during probe if the LED use same power
rail with camera, this patch move the OTP data access out of
probe, it will only occur on demand from user by nvmem sysfs.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support of BT656 embedded synchronization bus.
This mode allows to save hardware synchro lines hsync & vsync by replacing
them with synchro codes embedded in data stream.
This bus type is only compatible with 8 bits width data bus.
Due to reserved values 0x00 & 0xff used for synchro codes, valid data vary
from 0x1 to 0xfe, this is up to sensor to clip accordingly pixel data. As
a consequence of this clipping, JPEG is not supported with this bus type.
DCMI crop feature is also not available with this bus type.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a v4l2 sub-device driver for the OminiVision ov9734 image sensor
which can deliver maximum 720p image frames at 30 fps. This driver
also add vertical blanking, exposure, test pattern, digital and analog
gain control for the image sensor.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are few nice macros in mm.h, some of which we may use here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.
Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.
Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_dma_configure is called by the core before probe gets called so this
is redundant.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the MBUS quirks are applied by our global notifier, we can
remove them from our CSI driver for the A31.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
