7bf4a5b071
639 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Vladimir Oltean
|
eca70102cf |
net: dsa: felix: add support for changing DSA master
Changing the DSA master means different things depending on the tagging
protocol in use.
For NPI mode ("ocelot" and "seville"), there is a single port which can
be configured as NPI, but DSA only permits changing the CPU port
affinity of user ports one by one. So changing a user port to a
different NPI port globally changes what the NPI port is, and breaks the
user ports still using the old one.
To address this while still permitting the change of the NPI port,
require that the user ports which are still affine to the old NPI port
are down, and cannot be brought up until they are all affine to the same
NPI port.
The tag_8021q mode ("ocelot-8021q") is more flexible, in that each user
port can be freely assigned to one CPU port or to the other. This works
by filtering host addresses towards both tag_8021q CPU ports, and then
restricting the forwarding from a certain user port only to one of the
two tag_8021q CPU ports.
Additionally, the 2 tag_8021q CPU ports can be placed in a LAG. This
works by enabling forwarding via PGID_SRC from a certain user port
towards the logical port ID containing both tag_8021q CPU ports, but
then restricting forwarding per packet, via the LAG hash codes in
PGID_AGGR, to either one or the other.
When we change the DSA master to a LAG device, DSA guarantees us that
the LAG has at least one lower interface as a physical DSA master.
But DSA masters can come and go as lowers of that LAG, and
ds->ops->port_change_master() will not get called, because the DSA
master is still the same (the LAG). So we need to hook into the
ds->ops->port_lag_{join,leave} calls on the CPU ports and update the
logical port ID of the LAG that user ports are assigned to.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
|
Vladimir Oltean
|
2e359b00a1 |
net: dsa: propagate extack to port_lag_join
Drivers could refuse to offload a LAG configuration for a variety of reasons, mainly having to do with its TX type. Additionally, since DSA masters may now also be LAG interfaces, and this will translate into a call to port_lag_join on the CPU ports, there may be extra restrictions there. Propagate the netlink extack to this DSA method in order for drivers to give a meaningful error message back to the user. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Sumit Gupta
|
b713442214 |
soc/tegra: cbb: Add CBB 1.0 driver for Tegra194
Adding driver to handle errors from Control Backbone (CBB) which are generated due to illegal accesses. CBB 1.0 is used in Tegra194 SoCs. When an error is reported from a NOC within CBB, the driver prints debug information about failed transaction like Error Code, Error Description, Master, Address, AXI ID, Cache, Protection, Security Group etc. It then causes system crash using BUG_ON() or call WARN() based on whether the error type is fatal or not. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Sumit Gupta
|
96765cc475 |
soc/tegra: Set ERD bit to mask inband errors
Add a function to set the ERD (Error Response Disable) bit in the MISCREG_CCROC_ERR_CONFIG register from the Control Backbone (CBB) error handler driver. ERD bit allows masking of SError due to inband errors which are caused by illegal register accesses through CBB. When the bit is set, interrupt is used for reporting errors and magic code '0xdead2003' is returned. This change is only required for Tegra194 SoC as the config is moved to CBB register space for future SoC's. Also, remove unmapping the apbmisc_base as it's required to get the base address for accessing the misc register. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Conor Dooley
|
b56bae2dd6 |
clk: microchip: mpfs: add reset controller
Add a reset controller to PolarFire SoC's clock driver. This reset controller is registered as an aux device and read/write functions exported to the drivers namespace so that the reset controller can access the peripheral device reset register. Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220909123123.2699583-5-conor.dooley@microchip.com |
||
Arnd Bergmann
|
c457d9a580 |
Memory controller drivers for v6.1 - MediaTek
Add support for the mt8188 SMI memory controller. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmMbWgUQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD19CoD/0X2+d8EZymIdiLjRy1REtVVHbhvBuCepVp ZSDHgwIFY/qNuzQwYfqamwXAzUXdJM0ihPB+JO7AaU76oT+g9yToJaJQi4KbiAU6 A85HzTNFrQJiFlw6JOxoAN8uXcmF49sFzUlTe/X8YP+fQ+mn/T6/W2eupv9s3x6n zd5F3u/ECg+0BmGVJfqJdDtri1hzp8m/BREHOZdBJR1ZS+39lL/sSDn1yeQ8X9to MttIXwZV5kQHfWUEqewXWJCfcGCKPwg/+4XeZ49X8gbubBDRbGzZTCnsn3Ddni7x Xd12kZ2cLPjZrua3/QNiVmiazD2GAjR2pUXvDa//C66niXihPC6QnRkosl7tz9ak z8cgFv1FtUiOfY5W4SX7bWrVNyC1Pi581k+vOBwjcdkRTWHRRVSwxH+kTFbPzSVZ OrTG9YTTJhYWlwnxL/R8P+aqa1LD57D5uDB7lSH/QTAWZyp3jnbgIbjbMFs43DJ4 tn1F/Gbutoq6b1cXrtk50OML2moCpLbXRV3N/Jsqg7Mk7pSMXNBXzR7dNRxtomcx dyHsh30EzNbOcZg5VIlmDjrN/Wd5rkt1ArY0R3XO4UpA2XeCye6IQmY1+VBqzBtY 9PwsDFBDl4MIvsVy3z8jk4IjxlKZo4j3W87s7bGT5OaKcSEL/Q+2519oYadDEVJu e3B440yz0g== =KlXR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMfSm8ACgkQmmx57+YA GNkRsA/+M+3UrgZbN0OxA8BADhjYBbi4Ff2nUhDJPd0WdjypNwOsERP9gssSkK2M t6njFcInnQeHfjvRVhjVrzJz3zIwXJZvyZm75+/4ceu2oLzcN9QsXZCVAw1S8L5t 95sHRCKlC7HHre5pwwXPuXVKf9MdAhLGAxeVMzffntJ3z22pNve1az2gpXxiGzLZ Yb2mke2nlkg1D6t9UL9OORO2+XDFFoaoed9LTmgbKYC8Tn5igsxuqbPaVQ2/gn2M 5Y8ym9T/yGmjAuqXX3jKVNBoGVgWbi5rpjaJEwRkYtSIO72qr+sipuVmsr7ZErN/ dJKfXo0pK6rgB7P8mdc9k9idkqCY5euRCUvsvrQKF0WMJ6coMD05aVsDtI5xvrg4 aAWVAZVzrkQ2js1nVG0ERUQKTaOvp8et1v2pJS3n1P0zqRDxqoDBmyCiBEY625Wx fiJW9ZYoTHuQu2tElY6SaR1aMvOLI/GKiXt2qW5jUtlQYn6yEvc4ggMG1WuHgT2i cegCHD/XB/tbBsA1J4ibxmn4n+cdQ5BiGaQsTnBuQ07P1sykyCrXvNcJ5jqt+OAH ZFl3BRbWM2jY//E8LpXqEcbrBm7fF9D2R3Rv3a09PJgeU7NFeouZKlnHNP20atHa g1tKjWyUH6ef6wB2WCNwnj8f5P1EuAh/S65GL9woxDVQWDKiP70= =phpc -----END PGP SIGNATURE----- Merge tag 'memory-controller-drv-mediatek-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v6.1 - MediaTek Add support for the mt8188 SMI memory controller. * tag 'memory-controller-drv-mediatek-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: mtk-smi: mt8188: Add SMI Support memory: mtk-smi: Add enable IOMMU SMC command for MM master memory: mtk-smi: Add return value for configure port function dt-bindings: memory: mediatek: Add mt8188 smi binding Link: https://lore.kernel.org/r/20220909153037.824092-4-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Vladimir Oltean
|
4d1d157fb6 |
net: mscc: ocelot: share the common stat definitions between all drivers
All switch families supported by the ocelot lib (ocelot, felix, seville) export the same registers so far. But for example felix also has TSN counters, while the others don't. To reduce the bloat even further, create an OCELOT_COMMON_STATS() macro which just lists all stats that are common between switches. The array elements are still replicated among all of vsc9959_stats_layout, vsc9953_stats_layout and ocelot_stats_layout. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
b69cf1c675 |
net: mscc: ocelot: minimize definitions for stats
The current definition of struct ocelot_stat_layout is long-winded (4 lines per entry, and we have hundreds of entries), so we could make an effort to use the C preprocessor and reduce the line count. Create an implicit correspondence between enum ocelot_reg, which tells us the register address (SYS_COUNT_RX_OCTETS etc) and enum ocelot_stat which allows us to index the ocelot->stats array (OCELOT_STAT_RX_OCTETS etc), and don't require us to specify both when we define what stats each switch family has. Create an OCELOT_STAT() macro that pairs only an enum ocelot_stat to an enum ocelot_reg, and an OCELOT_STAT_ETHTOOL() macro which also contains a name exported to the unstructured ethtool -S stringset API. For now, we define all counters as having the OCELOT_STAT_ETHTOOL() kind, but we will add more counters in the future which are not exported to the unstructured ethtool -S. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
be5c13f262 |
net: mscc: ocelot: harmonize names of SYS_COUNT_TX_AGING and OCELOT_STAT_TX_AGED
The hardware counter is called C_TX_AGED, so rename SYS_COUNT_TX_AGING to SYS_COUNT_TX_AGED. This will become important since we want to minimize the way in which we declare struct ocelot_stat_layout elements, using the C preprocessor. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
e32036e1ae |
net: mscc: ocelot: add support for all sorts of standardized counters present in DSA
DSA is integrated with the new standardized ethtool -S --groups option, but the felix driver only exports unstructured statistics. Reuse the array of 64-bit statistics collected by ocelot_check_stats_work(), but just export select values from it. Since ocelot_check_stats_work() runs periodically to avoid 32-bit overflow, and the ethtool calling context is sleepable, we update the 64-bit stats one more time, to provide up-to-date values. The locking scheme with a mutex followed by a spinlock is a bit hard to digest, so we create and use a ocelot_port_stats_run() helper with a callback that populates the ethool stats group the caller is interested in. The exported stats are: ethtool -S swp0 --groups eth-phy ethtool -S swp0 --groups eth-mac ethtool -S swp0 --groups eth-ctrl ethtool -S swp0 --groups rmon ethtool --include-statistics --show-pause swp0 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
776b71e553 |
net: dsa: felix: use ocelot's ndo_get_stats64 method
Move the logic from the ocelot switchdev driver's ocelot_get_stats64() method to the common switch lib and reuse it for the DSA driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
25027c8409 |
net: dsa: felix: check the 32-bit PSFP stats against overflow
The Felix PSFP counters suffer from the same problem as the ocelot ndo_get_stats64 ones - they are 32-bit, so they can easily overflow and this can easily go undetected. Add a custom hook in ocelot_check_stats_work() through which driver specific actions can be taken, and update the stats for the existing PSFP filters from that hook. Previously, vsc9959_psfp_filter_add() and vsc9959_psfp_filter_del() were serialized with respect to each other via rtnl_lock(). However, with the new entry point into &psfp->sfi_list coming from the periodic worker, we now need an explicit mutex to serialize access to these lists. We used to keep a struct felix_stream_filter_counters on stack, through which vsc9959_psfp_stats_get() - a FLOW_CLS_STATS callback - would retrieve data from vsc9959_psfp_counters_get(). We need to become smarter about that in 3 ways: - we need to keep a persistent set of counters for each stream instead of keeping them on stack - we need to promote those counters from u32 to u64, and create a procedure that properly keeps 64-bit counters. Since we clear the hardware counters anyway, and we poll every 2 seconds, a simple increment of a u64 counter with a u32 value will perfectly do the job. - FLOW_CLS_STATS also expect incremental counters, so we also need to zeroize our u64 counters every time sch_flower calls us Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
96980ff7c2 |
net: mscc: ocelot: make access to STAT_VIEW sleepable again
To support SPI-controlled switches in the future, access to SYS_STAT_CFG_STAT_VIEW needs to be done outside of any spinlock protected region, but it still needs to be serialized (by a mutex). Split the ocelot->stats_lock spinlock into a mutex that serializes indirect access to hardware registers (ocelot->stat_view_lock) and a spinlock that serializes access to the u64 ocelot->stats array. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
0a2360c596 |
net: dsa: felix: add definitions for the stream filter counters
TSN stream (802.1Qci, 802.1CB) filters are also accessed through STAT_VIEW, just like the port registers, but these counters are per stream, rather than per port. So we don't keep them in ocelot_port_update_stats(). What we can do, however, is we can create register definitions for them just like we have for the port counters, and delete the last remaining user of the SYS_CNT register + a group index (read_gix). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Paolo Abeni
|
9f8f1933dc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/freescale/fec.h |
||
Sean Anderson
|
914f8b228e |
soc: fsl: qbman: Add CGR update function
This adds a function to update a CGR with new parameters. qman_create_cgr can almost be used for this (with flags=0), but it's not suitable because it also registers the callback function. The _safe variant was modeled off of qman_cgr_delete_safe. However, we handle multiple arguments and a return value. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Claudiu Beznea
|
a575207583 |
pinctrl: at91: move gpio suspend/resume calls to driver's context
Move gpio suspend/resume execution local to driver and let it execute as close as possible to the moment the machine specific PM code is executed (by setting it to .noirq member of dev_pm_ops). With this the at91_pinctrl_gpio_suspend()/at91_pinctrl_gpio_resume() calls were removed from arch/arm/mach-at91/pm.c and also a header has been removed. The patch has been checked on sama5d3_xplained, sam9x60ek, sama5d2_xplained, sama7g5ek boards. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220831135636.3176406-3-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
||
|
Arnd Bergmann
|
194bebfea5 |
AT91 fixes for 6.0
It contains: - fixes for self-refresh on SAMA7G5 while in AT91 power management modes: one disabling a DDR PHY controller DLL which has been proved to be buggy and can introduce glitches that can cause unexpected behavior; one fixing the DDR PHY recalibration which cannot work for all possible cases (due to hardware bug) while using backup and self-refresh AT91 power management mode; - one defconfig fix to remove CONFIG_MICROCHIP_PIT64B from all AT91 defconfigs; - multiple device tree fixes for regulators to avoid having some of them enabled all the time and to describe min and max output ranges according to board capabilities. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYxG/lwAKCRCejrg/N2X7 /bQpAQCEfcz8ockiRHT3dkJcoI0yHbEiZIHSbPjwFLlu54IVBgEAjZPhSIbtYTjM 7MDRFXYF6BeaNga99JXjItz1IlwkvA8= =5Kwl -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMRzOAACgkQmmx57+YA GNkVsxAArs1HJ4R8p2H54szlzrLGkgPrXuAIZNnV13jiRi5FL6p5doFLb2Ldhrro OoSP/9Z8GaEu6B3YP+5QP5gAXtKXntLdsFZA3XididLsZCSJtazuSv4uUUxPg86K DagY+Yhlb05vZH4JMjC7MJztbaq2rbP/tzYPvdR8I6aN8OIORchzu/36kwp8TVGk 2FiYJSxk3ccYcVTqZjORjQadUn2Hx+rCKgC8lQLZTSnQ+/ZBmPC6vwiHCDVrgVBx mJeUBnbBFpQMyO3hzOKvLu2hHcHfJrBb7DnpVEUsenfl9O4XPu1LVmuCN7Osh9jT x+k7PNx1yrTzZpnICz8z92U13zgkaxqkaYAqzQZqEFae8Z2/SWitIls9pM5ZZTbX nZfWWP1qQ8cN27/fTNz6Igg1Lk3NS0zRsw2kSuRBCUejiQQscByOpEkxveJDb64u jEVCM9HqYZccKq+j77A1WJez5B7twDSAxl6pbtE0gD+++TqfOfCWxLjbVzx4l89X /Osr2keeB4tLnna2ltqtvlfH5rL0/A9OmkpXhlwW+VML73rP3fB0y1HCoEzmMyYQ XQVGwS0d8MMfXyXylpQn767Xxc3qhGdhutugHQgagOe8F74FgZOH5AZQTxBf4e8R g1uotqy/Fwxojtf9aJf4voeD2QuXg25E+qgDoQf6QW3EFCtaBDQ= =KEYR -----END PGP SIGNATURE----- Merge tag 'at91-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.0 It contains: - fixes for self-refresh on SAMA7G5 while in AT91 power management modes: one disabling a DDR PHY controller DLL which has been proved to be buggy and can introduce glitches that can cause unexpected behavior; one fixing the DDR PHY recalibration which cannot work for all possible cases (due to hardware bug) while using backup and self-refresh AT91 power management mode; - one defconfig fix to remove CONFIG_MICROCHIP_PIT64B from all AT91 defconfigs; - multiple device tree fixes for regulators to avoid having some of them enabled all the time and to describe min and max output ranges according to board capabilities. * tag 'at91-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time ARM: dts: at91: sama7g5ek: specify proper regulator output ranges ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh ARM: at91: pm: fix self-refresh for sama7g5 ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B Link: https://lore.kernel.org/r/20220902085744.4193554-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Claudiu Beznea
|
7a94b83a7d |
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
On SAMA7G5, when resuming from backup and self-refresh, the bootloader
performs DDR PHY recalibration by restoring the value of ZQ0SR0 (stored
in RAM by Linux before going to backup and self-refresh). It has been
discovered that the current procedure doesn't work for all possible values
that might go to ZQ0SR0 due to hardware bug. The workaround to this is to
avoid storing some values in ZQ0SR0. Thus Linux will read the ZQ0SR0
register and cache its value in RAM after processing it (using
modified_gray_code array). The bootloader will restore the processed value.
Fixes:
|
||
|
Claudiu Beznea
|
a02875c4cb |
ARM: at91: pm: fix self-refresh for sama7g5
It has been discovered that on some parts, from time to time, self-refresh
procedure doesn't work as expected. Debugging and investigating it proved
that disabling AC DLL introduce glitches in RAM controllers which
leads to unexpected behavior. This is confirmed as a hardware bug. DLL
bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs
disabled. This introduce 6mA extra current consumption on VDDCORE when
switching to any ULP mode or standby mode but the self-refresh procedure
still works.
Fixes:
|
||
Chengci.Xu
|
4e508b259e |
memory: mtk-smi: Add enable IOMMU SMC command for MM master
For concerns about security, the register to enable/disable IOMMU of SMI LARB should only be configured in secure world. Thus, we add some SMC command for multimedia master to enable/disable MM IOMMU in ATF by setting the register of SMI LARB. This function is prepared for MT8188. Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220817124608.10062-4-chengci.xu@mediatek.com |
||
|
Vladimir Oltean
|
36a0bf4435 |
net: mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity
This is a partial revert of commit
|
||
|
Vladimir Oltean
|
d4c3676507 |
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
With so many counter addresses recently discovered as being wrong, it is desirable to at least have a central database of information, rather than two: one through the SYS_COUNT_* registers (used for ndo_get_stats64), and the other through the offset field of struct ocelot_stat_layout elements (used for ethtool -S). The strategy will be to keep the SYS_COUNT_* definitions as the single source of truth, but for that we need to expand our current definitions to cover all registers. Then we need to convert the ocelot region creation logic, and stats worker, to the read semantics imposed by going through SYS_COUNT_* absolute register addresses, rather than offsets of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been SYS_CNT, by the way). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
9190460084 |
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
The ocelot counters are 32-bit and require periodic reading, every 2 seconds, by ocelot_port_update_stats(), so that wraparounds are detected. Currently, the counters reported by ocelot_get_stats64() come from the 32-bit hardware counters directly, rather than from the 64-bit accumulated ocelot->stats, and this is a problem for their integrity. The strategy is to make ocelot_get_stats64() able to cherry-pick individual stats from ocelot->stats the way in which it currently reads them out from SYS_COUNT_* registers. But currently it can't, because ocelot->stats is an opaque u64 array that's used only to feed data into ethtool -S. To solve that problem, we need to make ocelot->stats indexable, and associate each element with an element of struct ocelot_stat_layout used by ethtool -S. This makes ocelot_stat_layout a fat (and possibly sparse) array, so we need to change the way in which we access it. We no longer need OCELOT_STAT_END as a sentinel, because we know the array's size (OCELOT_NUM_STATS). We just need to skip the array elements that were left unpopulated for the switch revision (ocelot, felix, seville). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
22d842e3ef |
net: mscc: ocelot: turn stats_lock into a spinlock
ocelot_get_stats64() currently runs unlocked and therefore may collide with ocelot_port_update_stats() which indirectly accesses the same counters. However, ocelot_get_stats64() runs in atomic context, and we cannot simply take the sleepable ocelot->stats_lock mutex. We need to convert it to an atomic spinlock first. Do that as a preparatory change. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
5152de7b79 |
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
Reading stats using the SYS_COUNT_* register definitions is only used by ocelot_get_stats64() from the ocelot switchdev driver, however, currently the bucket definitions are incorrect. Separately, on both RX and TX, we have the following problems: - a 256-1023 bucket which actually tracks the 256-511 packets - the 1024-1526 bucket actually tracks the 512-1023 packets - the 1527-max bucket actually tracks the 1024-1526 packets => nobody tracks the packets from the real 1527-max bucket Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS all track the wrong thing. However this doesn't seem to have any consequence, since ocelot_get_stats64() doesn't use these. Even though this problem only manifests itself for the switchdev driver, we cannot split the fix for ocelot and for DSA, since it requires fixing the bucket definitions from enum ocelot_reg, which makes us necessarily adapt the structures from felix and seville as well. Fixes: |
||
Linus Torvalds
|
228dfe98a3 |
Char / Misc driver changes for 6.0-rc1
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
|
||
|
Vladimir Oltean
|
1c9017e44a |
net: dsa: felix: keep reference on entire tc-taprio config
In a future change we will need to remember the entire tc-taprio config on all ports rather than just the base time, so use the taprio_offload_get() helper function to replace ocelot_port->base_time with ocelot_port->taprio. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Xiaoliang Yang
|
8670dc33f4 |
net: dsa: felix: update base time of time-aware shaper when adjusting PTP time
When adjusting the PTP clock, the base time of the TAS configuration will become unreliable. We need reset the TAS configuration by using a new base time. For example, if the driver gets a base time 0 of Qbv configuration from user, and current time is 20000. The driver will set the TAS base time to be 20000. After the PTP clock adjustment, the current time becomes 10000. If the TAS base time is still 20000, it will be a future time, and TAS entry list will stop running. Another example, if the current time becomes to be 10000000 after PTP clock adjust, a large time offset can cause the hardware to hang. This patch introduces a tas_clock_adjust() function to reset the TAS module by using a new base time after the PTP clock adjustment. This can avoid issues above. Due to PTP clock adjustment can occur at any time, it may conflict with the TAS configuration. We introduce a new TAS lock to serialize the access to the TAS registers. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Caleb Connolly
|
d23c3c085a |
mfd: qcom-spmi-pmic: read fab id on supported PMICs
The PMI8998 and PM660 expose the fab_id, this is needed by drivers like the RRADC to calibrate ADC values. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-4-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Caleb Connolly
|
e9c11c6e3a |
mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
Some PMIC functions such as the RRADC need to be aware of the PMIC chip revision information to implement errata or otherwise adjust behaviour, export the PMIC information to enable this. This is specifically required to enable the RRADC to adjust coefficients based on which chip fab the PMIC was produced in, this can vary per unique device and therefore has to be read at runtime. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220429220904.137297-3-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
|
Linus Torvalds
|
cc3c470ae4 |
ARM: driver changes for 5.19
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKOXOoACgkQmmx57+YA
GNlpVQ//eQGfL0WktE5G/y0mCVuVHtXT5nSjHMgjTOdb9+QvaATCfxnLXvP7Gq7C
7YzJd68G+2ZC4rUkkjTxyMICT7eIrJSAIAFn4PWee4EQ5DfbHgG+1tToTjxqb+QQ
6wGB5MVaYUhjZE30kY2E8a+OKxHtEnkt9wcch6ei0vzsMZquQJF6byfHd5+I4Knd
CyDmXX8ZGXK3FnhvuBLr3Rgwyhs0X4Ju7UaONLZxBYxdnh8WmymRszmMnv5qEkub
KDe8fbhFamOT3Z55JdCA5xq7LvUzjsKpTGFxFcS0ptbkTmtAsuyYqqiWvAPx3D5u
5TxVGSx9QKid6fpIsITZ2ptO6fgljh1W9b/3Y3/eltudXsM1qqSxyN2Hre+M9egf
WEDADqbNR5Y5+bq1iZWI348jXkNHVPpsLHI9Ihqf4yyrKwFkmRmNLnws53XTAPH2
FPXZvJjwFDBDHGfewSoLFePXUPNytVLXbr6Mq72ZyTDIBDU8Mxh666Wd8bu4tgbG
1Y2pMjDIdXDOsljM6Of5D3XjM1kuDwEmFxWGy+cKLgoEbHLeE1xIbTjUir4687+d
VNHdtsIRFPRZzz2lUSmI8vlA2aewMWrkOF/Ulz8xh6gG8uitMSfOxghg4IWOfRVM
mlvgFP5eqTInmQcbWRxaRO9JzP+rPp1sAcEpsBmuEHw5Akflbc8=
=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
|
||
|
Linus Torvalds
|
7e062cda7d |
Networking changes for 5.19.
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmKNMPQACgkQMUZtbf5S
IrsRARAAuDyYs6jFYB3p+xazZdOnbF4iAgVv71+DQGvmsCl6CB9OrsNZMlvE85OL
Q3gjcRbgjrkN4lhgI8DmiGYbsUJnAvVjFdNjccz1Z/vTLYvuIM0ol54MUp5S+9WY
StncOJkOGJxxR/Gi5gzVmejPDsysU3Jik+hm/fpIcz8pybXxAsFKU5waY5qfl+/T
TZepfV0VCfqRDjqcF1qA5+jJZNU8pdodQlZ1+mh8bwu6Jk1ZkWkj6Ov8MWdwQldr
LnPeK/9hIGzkdJYHZfajxA3t8D0K5CHzSuih2bJ9ry8ZXgVBkXEThew778/R5izW
uB0YZs9COFlrIP7XHjtRTy/2xHOdYIPlj2nWhVdfuQDX8Crvt4VRN6EZ1rjko1ZJ
WanfG6WHF8NH5pXBRQbh3kIMKBnYn6OIzuCfCQSqd+niHcxFIM4vRiggeXI5C5TW
vJgEWfK6X+NfDiFVa3xyCrEmp5ieA/pNecpwd8rVkql+MtFAAw4vfsotLKOJEAru
J/XL6UE+YuLqIJV9ACZ9x1AFXXAo661jOxBunOo4VXhXVzWS9lYYz5r5ryIkgT/8
/Fr0zjANJWgfIuNdIBtYfQ4qG+LozGq038VA06RhFUAZ5tF9DzhqJs2Q2AFuWWBC
ewCePJVqo1j2Ceq2mGonXRt47OEnlePoOxTk9W+cKZb7ZWE+zEo=
=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
|
||
|
Linus Torvalds
|
09583dfed2 |
Power management updates for 5.19-rc1
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown,
Dan Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen
Yu).
-----BEGIN PGP SIGNATURE-----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=Hewm
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
||
Ahmad Fatoum
|
007c3ff11f |
crypto: caam - add in-kernel interface for blob generator
The NXP Cryptographic Acceleration and Assurance Module (CAAM)
can be used to protect user-defined data across system reboot:
- When the system is fused and boots into secure state, the master
key is a unique never-disclosed device-specific key
- random key is encrypted by key derived from master key
- data is encrypted using the random key
- encrypted data and its encrypted random key are stored alongside
- This blob can now be safely stored in non-volatile memory
On next power-on:
- blob is loaded into CAAM
- CAAM writes decrypted data either into memory or key register
Add functions to realize encrypting and decrypting into memory alongside
the CAAM driver.
They will be used in a later commit as a source for the trusted key
seal/unseal mechanism.
Reviewed-by: David Gstir <david@sigma-star.at>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Tested-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-by: Michael Walle <michael@walle.cc> # on ls1028a (non-E and E)
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
||
|
Vladimir Oltean
|
a4e044dc4c |
net: dsa: felix: tag_8021q preparation for multiple CPU ports
Update the VCAP filters to support multiple tag_8021q CPU ports.
TX works using a filter for VLAN ID on the ingress of the CPU port, with
a redirect and a VLAN pop action. This can be updated trivially by
amending the ingress port mask of this rule to match on all tag_8021q
CPU ports.
RX works using a filter for ingress port on the egress of the CPU port,
with a VLAN push action. Here we need to replicate these filters for
each tag_8021q CPU port, and let them all have the same action.
This means that the OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN() cookie needs to
encode a unique value for every {user port, CPU port} pair it's given.
Do this by encoding the CPU port in the upper 16 bits of the cookie, and
the user port in the lower 16 bits.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Vladimir Oltean
|
c295f9831f |
net: mscc: ocelot: switch from {,un}set to {,un}assign for tag_8021q CPU ports
There is a desire for the felix driver to gain support for multiple tag_8021q CPU ports, but the current model prevents it. This is because ocelot_apply_bridge_fwd_mask() only takes into consideration whether a port is a tag_8021q CPU port, but not whose CPU port it is. We need a model where we can have a direct affinity between an ocelot port and a tag_8021q CPU port. This serves as the basis for multiple CPU ports. Declare a "dsa_8021q_cpu" backpointer in struct ocelot_port which encodes that affinity. Repurpose the "ocelot_set_dsa_8021q_cpu" API to "ocelot_assign_dsa_8021q_cpu" to express the change of paradigm. Note that this change makes the first practical use of the new ocelot_port->index field in ocelot_port_unassign_dsa_8021q_cpu(), where we need to remove the old tag_8021q CPU port from the reserved VLAN range. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
a72e23dd67 |
net: dsa: felix: update bridge fwd mask from ocelot lib when changing tag_8021q CPU
Add more logic to ocelot_port_{,un}set_dsa_8021q_cpu() from the ocelot
switch lib by encapsulating the ocelot_apply_bridge_fwd_mask() call that
felix used to have.
This is necessary because the CPU port change procedure will also need
to do this, and it's good to reduce code duplication by having an entry
point in the ocelot switch lib that does all that is needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Rafael J. Wysocki
|
d44d6c4a3a |
Update devfreq next for v5.19
Detailed description for this pull request:
1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq driver
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller).
-----BEGIN PGP SIGNATURE-----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=/3W8
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for 5.19-rc1 from Chanwoo Choi:
"1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq drivers
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller)."
* tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Keep cpufreq_policy for possible cpus
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
PM / devfreq: Add cpu based scaling support to passive governor
PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
PM / devfreq: rk3399_dmc: Block PMU during transitions
soc: rockchip: power-domain: Manage resource conflicts with firmware
PM / devfreq: rk3399_dmc: Avoid static (reused) profile
PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()
PM / devfreq: rk3399_dmc: Disable edev on remove()
PM / devfreq: rk3399_dmc: Support new *-ns properties
PM / devfreq: rk3399_dmc: Support new disable-freq properties
PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD
PM / devfreq: rk3399_dmc: Drop excess timing properties
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
|
||
|
Vladimir Oltean
|
7e708760fc |
net: mscc: ocelot: move ocelot_port_private :: chip_port to ocelot_port :: index
Currently the ocelot switch lib is unaware of the index of a struct ocelot_port, since that is kept in the encapsulating structures of outer drivers (struct dsa_port :: index, struct ocelot_port_private :: chip_port). With the upcoming increase in complexity associated with assigning DSA tag_8021q CPU ports to certain user ports, it becomes necessary for the switch lib to be able to retrieve the index of a certain ocelot_port. Therefore, introduce a new u8 to ocelot_port (same size as the chip_port used by the ocelot switchdev driver) and rework the existing code to populate and use it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
6d0be60047 |
net: mscc: ocelot: minimize holes in struct ocelot_port
Reorder members of struct ocelot_port to eliminate holes and reduce
structure size. Pahole says:
Before:
struct ocelot_port {
struct ocelot * ocelot; /* 0 8 */
struct regmap * target; /* 8 8 */
bool vlan_aware; /* 16 1 */
/* XXX 7 bytes hole, try to pack */
const struct ocelot_bridge_vlan * pvid_vlan; /* 24 8 */
unsigned int ptp_skbs_in_flight; /* 32 4 */
u8 ptp_cmd; /* 36 1 */
/* XXX 3 bytes hole, try to pack */
struct sk_buff_head tx_skbs; /* 40 96 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
u8 ts_id; /* 136 1 */
/* XXX 3 bytes hole, try to pack */
phy_interface_t phy_mode; /* 140 4 */
bool is_dsa_8021q_cpu; /* 144 1 */
bool learn_ena; /* 145 1 */
/* XXX 6 bytes hole, try to pack */
struct net_device * bond; /* 152 8 */
bool lag_tx_active; /* 160 1 */
/* XXX 1 byte hole, try to pack */
u16 mrp_ring_id; /* 162 2 */
/* XXX 4 bytes hole, try to pack */
struct net_device * bridge; /* 168 8 */
int bridge_num; /* 176 4 */
u8 stp_state; /* 180 1 */
/* XXX 3 bytes hole, try to pack */
int speed; /* 184 4 */
/* size: 192, cachelines: 3, members: 18 */
/* sum members: 161, holes: 7, sum holes: 27 */
/* padding: 4 */
};
After:
struct ocelot_port {
struct ocelot * ocelot; /* 0 8 */
struct regmap * target; /* 8 8 */
struct net_device * bond; /* 16 8 */
struct net_device * bridge; /* 24 8 */
const struct ocelot_bridge_vlan * pvid_vlan; /* 32 8 */
phy_interface_t phy_mode; /* 40 4 */
unsigned int ptp_skbs_in_flight; /* 44 4 */
struct sk_buff_head tx_skbs; /* 48 96 */
/* --- cacheline 2 boundary (128 bytes) was 16 bytes ago --- */
u16 mrp_ring_id; /* 144 2 */
u8 ptp_cmd; /* 146 1 */
u8 ts_id; /* 147 1 */
u8 stp_state; /* 148 1 */
bool vlan_aware; /* 149 1 */
bool is_dsa_8021q_cpu; /* 150 1 */
bool learn_ena; /* 151 1 */
bool lag_tx_active; /* 152 1 */
/* XXX 3 bytes hole, try to pack */
int bridge_num; /* 156 4 */
int speed; /* 160 4 */
/* size: 168, cachelines: 3, members: 18 */
/* sum members: 161, holes: 1, sum holes: 3 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Vladimir Oltean
|
15f6d01e48 |
net: mscc: ocelot: delete ocelot_port :: xmit_template
This is no longer used since commit
|
||
Jakub Kicinski
|
9b19e57a3c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c |
||
Ashish Mhetre
|
54a85e09f4 |
memory: tegra: Add MC error logging on Tegra186 onward
Add support for logging memory controller errors on Tegra186, Tegra194 and Tegra234. On these SoCs, interrupts can occur on multiple channels. Add support required to read the status of interrupts across multiple channels, log and clear them. Also add new interrupts supported on these SoCs. Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220506132312.3910637-5-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
|
Ashish Mhetre
|
a7cffa11fa |
memory: tegra: Add memory controller channels support
From Tegra186 onwards, the memory controller supports multiple channels. Add support for mapping the address spaces of these channels and specify the number of channels supported by Tegra186, Tegra194 and Tegra234. In case of old bindings, channels won't be present. If channels are not present then print a warning and continue so that backward compatibility will be preserved in driver. During error interrupts from memory controller, appropriate registers from these channels need to be accessed for logging error info. Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220506132312.3910637-4-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
||
Brian Norris
|
defec178df |
soc: rockchip: power-domain: Manage resource conflicts with firmware
On RK3399 platforms, power domains are managed mostly by the kernel
(drivers/soc/rockchip/pm_domains.c), but there are a few exceptions
where ARM Trusted Firmware has to be involved:
(1) system suspend/resume
(2) DRAM DVFS (a.k.a., "ddrfreq")
Exception (1) does not cause much conflict, since the kernel has
quiesced itself by the time we make the relevant PSCI call.
Exception (2) can cause conflict, because of two actions:
(a) ARM Trusted Firmware needs to read/modify/write the PMU_BUS_IDLE_REQ
register to idle the memory controller domain; the kernel driver
also has to touch this register for other domains.
(b) ARM Trusted Firmware needs to manage the clocks associated with
these domains.
To elaborate on (b): idling a power domain has always required ungating
an array of clocks; see this old explanation from Rockchip:
https://lore.kernel.org/linux-arm-kernel/54503C19.9060607@rock-chips.com/
Historically, ARM Trusted Firmware has avoided this issue by using a
special PMU_CRU_GATEDIS_CON0 register -- this register ungates all the
necessary clocks -- when idling the memory controller. Unfortunately,
we've found that this register is not 100% sufficient; it does not turn
the relevant PLLs on [0].
So it's possible to trigger issues with something like the following:
1. enable a power domain (e.g., RK3399_PD_VDU) -- kernel will
temporarily enable relevant clocks/PLLs, then turn them back off
2. a PLL (e.g., PLL_NPLL) is part of the clock tree for
RK3399_PD_VDU's clocks but otherwise unused; NPLL is disabled
3. perform a ddrfreq transition (rk3399_dmcfreq_target() -> ...
drivers/clk/rockchip/clk-ddr.c / ROCKCHIP_SIP_DRAM_FREQ)
4. ARM Trusted Firmware unagates VDU clocks (via PMU_CRU_GATEDIS_CON0)
5. ARM Trusted firmware idles the memory controller domain
6. Step 5 waits on the VDU domain/clocks, but NPLL is still off
i.e., we hang the system.
So for (b), we need to at a minimum manage the relevant PLLs on behalf
of firmware. It's easier to simply manage the whole clock tree, in a
similar way we do in rockchip_pd_power().
For (a), we need to provide mutual exclusion betwen rockchip_pd_power()
and firmware. To resolve that, we simply grab the PMU mutex and release
it when ddrfreq is done.
The Chromium OS kernel has been carrying versions of part of this hack
for a while, based on some new custom notifiers [1]. I've rewritten as a
simple function call between the drivers, which is OK because:
* the PMU driver isn't enabled, and we don't have this problem at all
(the firmware should have left us in an OK state, and there are no
runtime conflicts); or
* the PMU driver is present, and is a single instance.
And the power-domain driver cannot be removed, so there's no lifetime
management to worry about.
For completeness, there's a 'dmc_pmu_mutex' to guard (likely
theoretical?) probe()-time races. It's OK for the memory controller
driver to start running before the PMU, because the PMU will avoid any
critical actions during the block() sequence.
[0] The RK3399 TRM for PMU_CRU_GATEDIS_CON0 only talks about ungating
clocks. Based on experimentation, we've found that it does not power
up the necessary PLLs.
[1] CHROMIUM: soc: rockchip: power-domain: Add notifier to dmc driver
https://chromium-review.googlesource.com/q/I242dbd706d352f74ff706f5cbf42ebb92f9bcc60
Notably, the Chromium solution only handled conflict (a), not (b).
In practice, item (b) wasn't a problem in many cases because we
never managed to fully power off PLLs. Now that the (upstream) video
decoder driver performs runtime clock management, we often power off
NPLL.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
||
|
Vladimir Oltean
|
28de0f9fec |
net: dsa: felix: perform MDB migration based on ocelot->multicast list
The felix driver is the only user of dsa_port_walk_mdbs(), and there isn't even a good reason for it, considering that the host MDB entries are already saved by the ocelot switch lib in the ocelot->multicast list. Rewrite the multicast entry migration procedure around the ocelot->multicast list so we can delete dsa_port_walk_mdbs(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
e1846cff2f |
net: mscc: ocelot: mark traps with a bool instead of keeping them in a list
Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.
Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.
There are at least 2 bugs which are direct consequences of this design
decision.
First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().
Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().
Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/
but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():
- ocelot_trap_add()
- felix_tag_8021q_vlan_add_rx()
- felix_tag_8021q_vlan_add_tx()
Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.
So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.
Fixes:
|
||
Colin Foster
|
8c5b07da9b |
net: mscc: ocelot: add missed parentheses around macro argument
Commit |
||
|
Colin Foster
|
05e4ed1ce5 |
net: mscc: ocelot: remove unnecessary variable
Commit
|
||
|
Colin Foster
|
2f187bfa6f |
net: ethernet: ocelot: remove the need for num_stats initializer
There is a desire to share the oclot_stats_layout struct outside of the current vsc7514 driver. In order to do so, the length of the array needs to be known at compile time, and defined in the struct ocelot and struct felix_info. Since the array is defined in a .c file and would be declared in the header file via: extern struct ocelot_stat_layout[]; the size of the array will not be known at compile time to outside modules. To fix this, remove the need for defining the number of stats at compile time and allow this number to be determined at initialization. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
b14ffae378 |
drm for 5.18-rc1
dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmI71h4ACgkQDHTzWXnE hr6wKg//SvKFiEOhptua8Ao8XYkhXpg1/tgdAs4D7bZ0YgJyF4Im0RuFOKMmF3mN 0Y8AwguqrsmrOAFbK8B1WEysB66DmGlZN/V2Q75X7fui8xs4uGF2Fcxyr+265zhf vONPwAoxYr+KXqwOI1p1BP2QEL6bJTdu+nrXRsXIBIrWnw8ehXJlw3fDhgvG5QBn RPdbU7lQnd47hdYxkbe5SiZvWnPC46dJmpqsRJir0xjskR6juU36f34C4IKhTGwO NDPeWVgusVXtIC/F4X6RebCWG0f66h+CUFa9zeYIleI/2/5yZWXfcw6Obx8HgPkt gieiI0R4TpkVxeHCApCQ5UpxWgfSOXdoDoyw172bKQw7JCHVEkSwenyMEEwNet6r SCJrRmlB1PBI/iTWmhm9qgrU46ZZyAnQoTlCsXGzJncdP3hzGlA1embl00yfEl7f wzM35N20qd5T4VKUEF8QYF0fLZYmKw4cWVASu4hQ3qmGal6frilphz2J8JK8hQNq KhFqNbVTnZsQNr9LBCbrf0kOPaMzpmW+2vQG9ApdAb1N3gNPZT7ctti0Xq5N2OUR AipWFAsDPS2NPADKmBtDU55PgFH9MqUIsoHHXLV4Qi76dvCqYoN68qRQxrL7rpSu b0gr0YKU2QcIB/uytjOPHcgtI5Xvrh+q8JPz/dJ38/Esgjmk4wo= =uRsT -----END PGP SIGNATURE----- Merge tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ... |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
|
Linus Torvalds
|
b4bc93bd76 |
ARM driver updates for 5.18
There are a few separately maintained driver subsystems that we merge through
the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs,
and clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport based
on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ
and older NVIDIA Tegra chips
-----BEGIN PGP SIGNATURE-----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=Cfbk
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
||
|
Linus Torvalds
|
baaa68a979 |
ARM: SoC updates for 5.18
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
|
||
|
Linus Torvalds
|
182966e1cd |
media updates for v5.18-rc1
-----BEGIN PGP SIGNATURE-----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=Bc0l
-----END PGP SIGNATURE-----
Merge tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a major reorg at platform Kconfig/Makefile files, organizing them per
vendor. The other media Kconfig/Makefile files also sorted
- New sensor drivers: hi847, isl7998x, ov08d10
- New Amphion vpu decoder stateful driver
- New Atmel microchip csi2dc driver
- tegra-vde driver promoted from staging
- atomisp: some fixes for it to work on BYT
- imx7-mipi-csis driver promoted from staging and renamed
- camss driver got initial support for VFE hardware version Titan 480
- mtk-vcodec has gained support for MT8192
- lots of driver changes, fixes and improvements
* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
media: amphion: cleanup media device if register it fail
media: amphion: fix some issues to improve robust
media: amphion: fix some error related with undefined reference to __divdi3
media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
media: vidtv: use vfree() for memory allocated with vzalloc()
media: m5mols/m5mols.h: document new reset field
media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
media: platform: Remove unnecessary print function dev_err()
media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
media: platform: amphion: Fix build error without MAILBOX
media: spi: Kconfig: Place SPI drivers on a single menu
media: i2c: Kconfig: move camera drivers to the top
media: atomisp: fix bad usage at error handling logic
media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
media: media/*/Kconfig: sort entries
media: Kconfig: cleanup VIDEO_DEV dependencies
media: platform/*/Kconfig: make manufacturer menus more uniform
media: platform: Create vendor/{Makefile,Kconfig} files
...
|
||
|
Vladimir Oltean
|
f2a0e216be |
net: mscc: ocelot: offload per-flow mirroring using tc-mirred and VCAP IS2
Per-flow mirroring with the VCAP IS2 TCAM (in itself handled as an offload for tc-flower) is done by setting the MIRROR_ENA bit from the action vector of the filter. The packet is mirrored to the port mask configured in the ANA:ANA:MIRRORPORTS register (the same port mask as the destinations for port-based mirroring). Functionality was tested with: tc qdisc add dev swp3 clsact tc filter add dev swp3 ingress protocol ip \ flower skip_sw ip_proto icmp \ action mirred egress mirror dev swp1 and pinging through swp3, while seeing that the ICMP replies are mirrored towards swp1. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
ccb6ed426f |
net: mscc: ocelot: add port mirroring support using tc-matchall
Ocelot switches perform port-based ingress mirroring if ANA:PORT:PORT_CFG field SRC_MIRROR_ENA is set, and egress mirroring if the port is in ANA:ANA:EMIRRORPORTS. Both ingress-mirrored and egress-mirrored frames are copied to the port mask from ANA:ANA:MIRRORPORTS. So the choice of limiting to a single mirror port via ocelot_mirror_get() and ocelot_mirror_put() may seem bizarre, but the hardware model doesn't map very well to the user space model. If the user wants to mirror the ingress of swp1 towards swp2 and the ingress of swp3 towards swp4, we'd have to program ANA:ANA:MIRRORPORTS with BIT(2) | BIT(4), and that would make swp1 be mirrored towards swp4 too, and swp3 towards swp2. But there are no tc-matchall rules to describe those actions. Now, we could offload a matchall rule with multiple mirred actions, one per desired mirror port, and force the user to stick to the multi-action rule format for subsequent matchall filters. But both DSA and ocelot have the flow_offload_has_one_action() check for the matchall offload, plus the fact that it will get cumbersome to cross-check matchall mirrors with flower mirrors (which will be added in the next patch). As a result, we limit the configuration to a single mirror port, with the possibility of lifting the restriction in the future. Frames injected from the CPU don't get egress-mirrored, since they are sent with the BYPASS bit in the injection frame header, and this bypasses the analyzer module (effectively also the mirroring logic). I don't know what to do/say about this. Functionality was tested with: tc qdisc add dev swp3 clsact tc filter add dev swp3 ingress \ matchall skip_sw \ action mirred egress mirror dev swp1 and pinging through swp3, while seeing that the ICMP replies are mirrored towards swp1. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
978777d0fb |
net: dsa: felix: configure default-prio and dscp priorities
Follow the established programming model for this driver and provide shims in the felix DSA driver which call the implementations from the ocelot switch lib. The ocelot switchdev driver wasn't integrated with dcbnl due to lack of hardware availability. The switch doesn't have any fancy QoS classification enabled by default. The provided getters will create a default-prio app table entry of 0, and no dscp entry. However, the getters have been made to actually retrieve the hardware configuration rather than static values, to be future proof in case DSA will need this information from more call paths. For default-prio, there is a single field per port, in ANA_PORT_QOS_CFG, called QOS_DEFAULT_VAL. DSCP classification is enabled per-port, again via ANA_PORT_QOS_CFG (field QOS_DSCP_ENA), and individual DSCP values are configured as trusted or not through register ANA_DSCP_CFG (replicated 64 times). An untrusted DSCP value falls back to other QoS classification methods. If trusted, the selected ANA_DSCP_CFG register also holds the QoS class in the QOS_DSCP_VAL field. The hardware also supports DSCP remapping (DSCP value X is translated to DSCP value Y before the QoS class is determined based on the app table entry for Y) and DSCP packet rewriting. The dcbnl framework, for being so flexible in other useless areas, doesn't appear to support this. So this functionality has been left out. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Arnd Bergmann
|
d3d009847a |
AT91 SoC #2 for 5.18:
- SAMA5D29 variant to the SAMA5D2 family in SoC driver. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYiIhEwAKCRAfOrpwrNPN DFAlAP9xZajlf01HHkHuIYUY1yLwpIC+T/BhRWDx4K52frstAQEAhvSz47V9/v/l QkQGxuQyMjmihjFKh7+qVL8RgHZaPAc= =7HCW -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmInewAACgkQmmx57+YA GNkRuhAApqEF39tytJ7UHAhnjs+VxvYLQTP+ZBO6Dw0h/vG/sFWthG6sEJxgL8xv /ZOmDeABGB4+jsc9BXuBPV96sA6DkY2FKV0oHyOEvs0XsMU7Z4dmpTy/Zi1ji57O eKpqv4N2dEsqpq+JUTLHdTnTW5Gse8QHJ8krpNXx1J9k3acsEOupr2GfKfgqgy8C 4m2Y+2LFsCrtO8fVXgVnxgIDdmvAoc8jbkPJ1V+pHPkh4c+Ar5B1FpsK8XIOKde/ hvYQTJoPzSf5JAHZ5qZKQUMdQrTV9cdJLvwbR137e2soCHlkw4L7wNrhjW0rpTa8 6NVhGbz6xX8Inars5+2XIsbaSWV/g7XVTNvwtM7FM9aV/S9T/AZajc1HjJ+Tk2Ad et4AicpiBh9/0l77VsxngukpsZ8JPBNEz5fPLK3awA/eCFWHtiiBApz9Hp4sO2qg 25GJ0K0WAJSM27AbUCNjwYI/EQKqaZYvLq+k7jIMKXq5uX9lXwlAiG50kP8ZtvZb txKlZOYuqEHI5R7l5lTDkq7PL239fdBTb0M8G+uw65PY6HgwFarR7lvFFzAqFvMi Rx9eYLQhtP1d5sBOIUTATfHC9Qu+YpC1Sx9MHLyaU98V3TItTiD9YX6HRTFEaiv3 CTYx/g1XvX37kxtVD3q8Ea4uolqpOR+Kt8tSWRz4faD4gIJxA0s= =bF4h -----END PGP SIGNATURE----- Merge tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers AT91 SoC #2 for 5.18: - SAMA5D29 variant to the SAMA5D2 family in SoC driver. * tag 'at91-soc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: add support in soc driver for new SAMA5D29 soc: add microchip polarfire soc system controller ARM: at91: Kconfig: select PM_OPP ARM: at91: PM: add cpu idle support for sama7g5 ARM: at91: ddr: fix typo to align with datasheet naming ARM: at91: ddr: align macro definitions ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency Link: https://lore.kernel.org/r/20220304144216.23340-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Jakub Kicinski
|
80901bff81 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
net/batman-adv/hard-interface.c commit |
||
|
Vladimir Oltean
|
54c3198460 |
net: mscc: ocelot: enforce FDB isolation when VLAN-unaware
Currently ocelot uses a pvid of 0 for standalone ports and ports under a VLAN-unaware bridge, and the pvid of the bridge for ports under a VLAN-aware bridge. Standalone ports do not perform learning, but packets received on them are still subject to FDB lookups. So if the MAC DA that a standalone port receives has been also learned on a VLAN-unaware bridge port, ocelot will attempt to forward to that port, even though it can't, so it will drop packets. So there is a desire to avoid that, and isolate the FDBs of different bridges from one another, and from standalone ports. The ocelot switch library has two distinct entry points: the felix DSA driver and the ocelot switchdev driver. We need to code up a minimal bridge_num allocation in the ocelot switchdev driver too, this is copied from DSA with the exception that ocelot does not care about DSA trees, cross-chip bridging etc. So it only looks at its own ports that are already in the same bridge. The ocelot switchdev driver uses the bridge_num it has allocated itself, while the felix driver uses the bridge_num allocated by DSA. They are both stored inside ocelot_port->bridge_num by the common function ocelot_port_bridge_join() which receives the bridge_num passed by value. Once we have a bridge_num, we can only use it to enforce isolation between VLAN-unaware bridges. As far as I can see, ocelot does not have anything like a FID that further makes VLAN 100 from a port be different to VLAN 100 from another port with regard to FDB lookup. So we simply deny multiple VLAN-aware bridges. For VLAN-unaware bridges, we crop the 4000-4095 VLAN region and we allocate a VLAN for each bridge_num. This will be used as the pvid of each port that is under that VLAN-unaware bridge, for as long as that bridge is VLAN-unaware. VID 0 remains only for standalone ports. It is okay if all standalone ports use the same VID 0, since they perform no address learning, the FDB will contain no entry in VLAN 0, so the packets will always be flooded to the only possible destination, the CPU port. The CPU port module doesn't need to be member of the VLANs to receive packets, but if we use the DSA tag_8021q protocol, those packets are part of the data plane as far as ocelot is concerned, so there it needs to. Just ensure that the DSA tag_8021q CPU port is a member of all reserved VLANs when it is created, and is removed when it is deleted. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Tom Rix
|
fcfaff508b |
soc/tegra: bpmp: cleanup double word in comment
Remove the second 'or'. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Conor Dooley
|
d0054a470c |
soc: add microchip polarfire soc system controller
This driver provides an interface for other drivers to access the functions of the system controller on the Microchip PolarFire SoC. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220217101349.2374873-2-conor.dooley@microchip.com |
||
|
Claudiu Beznea
|
9584e7263e |
ARM: at91: PM: add cpu idle support for sama7g5
Add CPU idle support for SAMA7G5. Support will make use of PMC_CPU_RATIO register to divide the CPU clock by 16 before switching it to idle and use automatic self-refresh option of DDR controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-5-claudiu.beznea@microchip.com |
||
|
Claudiu Beznea
|
9a0775c9cd |
ARM: at91: ddr: fix typo to align with datasheet naming
Fix typo on UDDRC_PWRCTL.SELFREF_SW bitmask to align with datasheet naming. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-4-claudiu.beznea@microchip.com |
||
|
Claudiu Beznea
|
55614e682a |
ARM: at91: ddr: align macro definitions
Align all macro definitions. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-3-claudiu.beznea@microchip.com |
||
|
Claudiu Beznea
|
dc3005703f |
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
Remove CONFIG_SOC_SAMA7 dependency to avoid having #ifdef preprocessor directives in driver code (arch/arm/mach-at91/pm.c). This prepares the code for next commits. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220113144900.906370-2-claudiu.beznea@microchip.com |
||
|
Vladimir Oltean
|
961d8b6990 |
net: dsa: felix: support FDB entries on offloaded LAG interfaces
This adds the logic in the Felix DSA driver and Ocelot switch library. For Ocelot switches, the DEST_IDX that is the output of the MAC table lookup is a logical port (equal to physical port, if no LAG is used, or a dynamically allocated number otherwise). The allocation we have in place for LAG IDs is different from DSA's, so we can't use that: - DSA allocates a continuous range of LAG IDs starting from 1 - Ocelot appears to require that physical ports and LAG IDs are in the same space of [0, num_phys_ports), and additionally, ports that aren't in a LAG must have physical port id == logical port id The implication is that an FDB entry towards a LAG might need to be deleted and reinstalled when the LAG ID changes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Andy Shevchenko
|
988f0a9045 |
soc: fsl: Replace kernel.h with the necessary inclusions
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> |
||
|
Vladimir Oltean
|
9934800436 |
net: dsa: felix: update destinations of existing traps with ocelot-8021q
Historically, the felix DSA driver has installed special traps such that PTP over L2 works with the ocelot-8021q tagging protocol; commit |
||
|
Vladimir Oltean
|
9d75b88185 |
net: mscc: ocelot: annotate which traps need PTP timestamping
The ocelot switch library does not need this information, but the felix DSA driver does. As a reminder, the VSC9959 switch in LS1028A doesn't have an IRQ line for packet extraction, so to be notified that a PTP packet needs to be dequeued, it receives that packet also over Ethernet, by setting up a packet trap. The Felix driver needs to install special kinds of traps for packets in need of RX timestamps, such that the packets are replicated both over Ethernet and over the CPU port module. But the Ocelot switch library sets up more than one trap for PTP event messages; it also traps PTP general messages, MRP control messages etc. Those packets don't need PTP timestamps, so there's no reason for the Felix driver to send them to the CPU port module. By knowing which traps need PTP timestamps, the Felix driver can adjust the traps installed using ocelot_trap_add() such that only those will actually get delivered to the CPU port module. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
e42bd4ed09 |
net: mscc: ocelot: keep traps in a list
When using the ocelot-8021q tagging protocol, the CPU port isn't configured as an NPI port, but is a regular port. So a "trap to CPU" operation is actually a "redirect" operation. So DSA needs to set up the trapping action one way or another, depending on the tagging protocol in use. To ease DSA's work of modifying the action, keep all currently installed traps in a list, so that DSA can live-patch them when the tagging protocol changes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
85ea0daabe |
net: mscc: ocelot: avoid overlap in VCAP IS2 between PTP and MRP traps
OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN overlaps with OCELOT_VCAP_IS2_MRP_REDIRECT. To avoid this, make OCELOT_VCAP_IS2_MRP_REDIRECT take the cookie region from N to 2 * N - 1 (where N is ocelot->num_phys_ports). To avoid any risk that the singleton (not per port) VCAP IS2 filters overlap with per-port VCAP IS2 filters, we must ensure that the number of singleton filters is smaller than the number of physical ports. This is true right now, but may change in the future as switches with less ports get supported, or more singleton filters get added. So to be future-proof, let's move the singleton filters at the end of the range, where they won't overlap with anything to their right. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
b9bace6e53 |
net: mscc: ocelot: use a single VCAP filter for all MRP traps
The MRP assist code installs a VCAP IS2 trapping rule for each port, but since the key and the action is the same, just the ingress port mask differs, there isn't any need to do this. We can save some space in the TCAM by using a single filter and adjusting the ingress port mask. Reuse the ocelot_trap_add() and ocelot_trap_del() functions for this purpose. Now that the cookies are no longer per port, we need to change the allocation scheme such that MRP traps use a fixed number. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
36fac35b29 |
net: mscc: ocelot: delete OCELOT_MRP_CPUQ
MRP frames are configured to be trapped to the CPU queue 7, and this number is reflected in the extraction header. However, the information isn't used anywhere, so just leave MRP frames to go to CPU queue 0 unless needed otherwise. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Vladimir Oltean
|
c518afec28 |
net: mscc: ocelot: consolidate cookie allocation for private VCAP rules
Every use case that needed VCAP filters (in order: DSA tag_8021q, MRP, PTP traps) has hardcoded filter identifiers that worked well enough for that use case alone. But when two or more of those use cases would be used together, some of those identifiers would overlap, leading to breakage. Add definitions for each cookie and centralize them in ocelot_vcap.h, such that the overlaps are more obvious. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Foster
|
d87b1c08f3 |
net: mscc: ocelot: use bulk reads for stats
Create and utilize bulk regmap reads instead of single access for gathering stats. The background reading of statistics happens frequently, and over a few contiguous memory regions. High speed PCIe buses and MMIO access will probably see negligible performance increase. Lower speed buses like SPI and I2C could see significant performance increase, since the bus configuration and register access times account for a large percentage of data transfer time. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Foster
|
40f3a5c815 |
net: mscc: ocelot: add ability to perform bulk reads
Regmap supports bulk register reads. Ocelot does not. This patch adds support for Ocelot to invoke bulk regmap reads. That will allow any driver that performs consecutive reads over memory regions to optimize that access. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Colin Foster
|
65c53595bc |
net: ocelot: align macros for consistency
In the ocelot.h file, several read / write macros were split across multiple lines, while others weren't. Split all macros that exceed the 80 character column width and match the style of the rest of the file. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Dave Airlie
|
53dbee4926 |
drm-misc-next for v5.18:
UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmHyiHMACgkQ/lWMcqZw E8OLfQ//Xd1njt93nRGoQofuQkz23n2AUTAnmbwzQKcvmat8ugXbRJ5JaVQJrFpu OQEYM46eZIyu2LekMiz4HgPK8CjS156QJ1WtltUFglOY1KLejb6HF5boBYxLkIC7 wLhkaRiwed4t7WOTrftgzpH5FNj/7Vi+Hav9l8rYRC74sWanEZNGBJL2OD9GRdlU 3tlmY8oXVAN8YDD/43Cv+foOTzLS/COI7JCFgFRhfzoFss3EVR061u55uOq18STB UI29NusqX7/K6hQAWCKl0EQBEZWMR02/dgu3ZpOEHHAa96RgHxIuRYsIO9kvGgiF VyW0EW6AyD/KsOSBYnsfUqkFfNchx9Xb8ZDjIhHUYxPsxe4iUJneCrdIKEmLWgSd 1bVNrltLJKBQARW4Whpy/gaiKV8RD8YVJobA/+/COeCUXCnNAT43O9aJmix/7253 Q7ORXTss5WRpuYswMWmObebf8p3IhFjTvlzzenXynl7mkaohGzHPf6SUSUZbJ8Df PZCh17McwIEQ1BtYeegeAGM6s8lrv5+yZaY4bnkQsJNOHeab0cPqmQ8/s+hUeRtp 3VDRVhkgzz2XuTaiKia0gWcAQbdZ2KornkP4QMyDH7w0+6bsuJnNXe4L1XY9lt4J 5v411FaD61FbGDhu5PFtYI7+ZlgM0h5sqlhVkUEzbckzTF3SC9c= =IMtm -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next [airlied: add two missing Kconfig] drm-misc-next for v5.18: UAPI Changes: - Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL. Cross-subsystem Changes: - Assorted dt bindings updates. - Fix vga16fb vga checking on x86. - Fix extra semicolon in rwsem.h's _down_write_nest_lock. - Assorted small fixes to agp and fbdev drivers. - Fix oops in creating a udmabuf with 0 pages. - Hot-unplug firmware fb devices on forced removal - Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy. Core Changes: - Mock a drm_plane in drm-plane-helper selftest. - Assorted bug fixes to device logging, dbi. - Use DP helper for sink count in mst. - Assorted documentation fixes. - Assorted small fixes. - Move DP headers to drm/dp, and add a drm dp helper module. - Move the buddy allocator from i915 to common drm. - Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers. - Support microsoft extension for HMDs and specialized monitors. - Improve edid parser's deep color handling. - Add type 7 timing support to edid parser. - Add a weak backpointer to the ttm_bo from ttm_resource - Add 3 eDP panels. Driver Changes: - Add support for HDMI and JZ4780 to ingenic. - Add support for higher DP/eDP bitrates to nouveau. - Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers. - Convert and revert exynos dsi support to bridge driver. - Add vcc supply regulator support for sn65dsi83. - More conversion of bridge/chipone-icn6211 to atomic. - Remove conflicting fb's from stm, and add support for new hw version. - Add device link in parade-ps8640 to fix suspend/resume. - Update Boe-tv110c9m init sequence. - Add wide screen support to AST2600. - Fix omapdrm implicit dma_buf fencing. - Add support for multiple overlay planes to vkms. - Convert bridge/anx7625 to atomic, add HDCP support, add eld support for audio, and fix HPD. - Add driver for ChromeOS privacy screen. - Handover display from firmware to vc4 more gracefully, and support nomodeset. - Add flexible and ycbcr pixel formats to stm/ltdc. - Convert exynos mipi dsi to atomic. - Add initial dual core group GPUs support to panfrost. - No longer add exclusive fence in amdgpu as shared fence. - Add CSC and full range supoprt to vc4. - Shutdown the display on system shutdown and unbind. - Add Multi-Inno Technology MI0700S4T-6 simple panel. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com |
||
Yong Wu
|
dbd171df8c |
media: memory: mtk-smi: Get rid of mtk_smi_larb_get/put
After adding device_link between the iommu consumer and smi-larb, the pm_runtime_get(_sync) of smi-larb and smi-common will be called automatically. we can get rid of mtk_smi_larb_get/put. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Evan Green <evgreen@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> |
||
Maxime Ripard
|
39feb6e726
|
firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the firmware the kernel is in charge of the display now and the firmware can free whatever resources it was using. Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-2-maxime@cerno.tech |
||
|
Linus Torvalds
|
8efd0d9c31 |
Networking changes for 5.17.
Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible,
or at least perform the freeing outside of the socket lock section
to decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice
and net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported
in the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or
MSM8974 (qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch
driver with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of:
lan78xx, ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer granularity,
stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KLm3
-----END PGP SIGNATURE-----
Merge tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
|
||
|
Linus Torvalds
|
e85195d5bf |
ARM: SoC driver updates for v5.17
There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU,
as well as a new USIv2 driver that handles various types of
serial communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple
drivers, as well as memory controller support for RZ/G2L
(R9A07G044).
- Apple M1 gains support for the PMGR power management driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHDpK8ACgkQmmx57+YA
GNmUqhAAnaxXJeu+dfWanrAAeH1MKju/uxB6bogtwrAc928BaqmeZfiAqsT9KsWu
FhkWSGRu+y74fct4zkD3xfl0V2ROSrSjcvrWVu0GJPnXoOLKDZ1RbdZDnfXbwowa
4urL5HeOtKYUpLjw7z8EQ43SHZba7CsiImGcF/4OtHW1hNGNIlU/Mym93lFT5Xdq
HwDrktBWWVvBkCnxVGJjMwGGSCJbowIsPK8p8xr4CqML4Vdcx89qKB8cnCOg8Bgo
YqzcJCTOY9K5qXI8D20GaTJCP5vCPxMgmeFn4LgWa+h9iJrt+g4J8zA1qGw92nwJ
W2uRu/6YkCC2HMiyExuxkJNPKbFRbOqAm7lA/ZzuFpFU5RowACIrlwm4ZR/4UFDG
fzrt3ZfNLRu33QxqhKY0jWGeHu729+RE2kpQ4FXveFmrtRIWnuX70/+NQFVhm+qy
EBgXmlWNhTh2tcgfEzPja52+5h3SYKk6/J44266i/34x5eLDvmuRADzCVpLUmbPS
G5UHVkWHZPJne6ZJQ+yz+o2h6BjcpCTvPRbt2/KkSOo9S0Qj4/XrOUHBAofy3odH
Tdiba6lXMHZqvLlOOrMyJ0qdv26FJyJaSg5Wqhq45G1YCW5Xjc+cYzZggJBvBpIh
thyN4b9jqfTnAZzKB6LCBUmEF2A7gXkuW9oXzNUkKtVzYluu1aQ=
=tlZT
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
|
||
|
Vladimir Oltean
|
5cad43a52e |
net: dsa: felix: add port fast age support
Add support for flushing the MAC table on a given port in the ocelot switch library, and use this functionality in the felix DSA driver. This operation is needed when a port leaves a bridge to become standalone, and when the learning is disabled, and when the STP state changes to a state where no FDB entry should be present. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220107144229.244584-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Dmitry Osipenko
|
9131c63317 |
soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
Only couple drivers need to get the -ENODEV error code and majority of drivers need to explicitly initialize the performance state. Add new common helper which sets up OPP table for these drivers. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Clément Léger
|
753a026cfe |
net: ocelot: add FDMA support
Ethernet frames can be extracted or injected autonomously to or from the device’s DDR3/DDR3L memory and/or PCIe memory space. Linked list data structures in memory are used for injecting or extracting Ethernet frames. The FDMA generates interrupts when frame extraction or injection is done and when the linked lists need updating. The FDMA is shared between all the ethernet ports of the switch and uses a linked list of descriptors (DCB) to inject and extract packets. Before adding descriptors, the FDMA channels must be stopped. It would be inefficient to do that each time a descriptor would be added so the channels are restarted only once they stopped. Both channels uses ring-like structure to feed the DCBs to the FDMA. head and tail are never touched by hardware and are completely handled by the driver. On top of that, page recycling has been added and is mostly taken from gianfar driver. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Co-developed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Clément Léger
|
b471a71e52 |
net: ocelot: add and export ocelot_ptp_rx_timestamp()
In order to support PTP in FDMA, PTP handling code is needed. Since this is the same as for register-based extraction, export it with a new ocelot_ptp_rx_timestamp() function. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Clément Léger
|
e5150f0072 |
net: ocelot: export ocelot_ifh_port_set() to setup IFH
FDMA will need this code to prepare the injection frame header when sending SKBs. Move this code into ocelot_ifh_port_set() and add conditional IFH setting for vlan and rew op if they are not set. Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Colin Foster
|
840ece19e9 |
net: ocelot: fix missed include in the vsc7514_regs.h file
commit |
||
|
Colin Foster
|
32ecd22ba6 |
net: mscc: ocelot: split register definitions to a separate file
Move these to a separate file will allow them to be shared to other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
93d5404e89 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ipa/ipa_main.c |
||
|
Vladimir Oltean
|
95706be13b |
net: mscc: ocelot: create a function that replaces an existing VCAP filter
VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind tc flower offload on ocelot, among other things. The ingress port mask on which VCAP rules match is present as a bit field in the actual key of the rule. This means that it is possible for a rule to be shared among multiple source ports. When the rule is added one by one on each desired port, that the ingress port mask of the key must be edited and rewritten to hardware. But the API in ocelot_vcap.c does not allow for this. For one thing, ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric, because ocelot_vcap_filter_add() works with a preallocated and prepopulated filter and programs it to hardware, and ocelot_vcap_filter_del() does both the job of removing the specified filter from hardware, as well as kfreeing it. That is to say, the only option of editing a filter in place, which is to delete it, modify the structure and add it back, does not work because it results in use-after-free. This patch introduces ocelot_vcap_filter_replace, which trivially reprograms a VCAP entry to hardware, at the exact same index at which it existed before, without modifying any list or allocating any memory. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vladimir Oltean
|
8abe197038 |
net: dsa: felix: enable cut-through forwarding between ports by default
The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).
The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.
There are two cases that need special attention.
The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.
The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.
Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.
Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Xiaoliang Yang
|
a7e13edf37 |
net: dsa: felix: restrict psfp rules on ingress port
PSFP rules take effect on the streams from any port of VSC9959 switch. This patch use ingress port to limit the rule only active on this port. Each stream can only match two ingress source ports in VSC9959. Streams from lowest port gets the configuration of SFID pointed by MAC Table lookup and streams from highest port gets the configuration of (SFID+1) pointed by MAC Table lookup. This patch defines the PSFP rule on highest port as dummy rule, which means that it does not modify the MAC table. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Xiaoliang Yang
|
77043c3709 |
net: mscc: ocelot: use index to set vcap policer
Policer was previously automatically assigned from the highest index to the lowest index from policer pool. But police action of tc flower now uses index to set an police entry. This patch uses the police index to set vcap policers, so that one policer can be shared by multiple rules. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Xiaoliang Yang
|
7d4b564d6a |
net: dsa: felix: support psfp filter on vsc9959
VSC9959 supports Per-Stream Filtering and Policing(PSFP) that complies with the IEEE 802.1Qci standard. The stream is identified by Null stream identification(DMAC and VLAN ID) defined in IEEE802.1CB. For PSFP, four tables need to be set up: stream table, stream filter table, stream gate table, and flow meter table. Identify the stream by parsing the tc flower keys and add it to the stream table. The stream filter table is automatically maintained, and its index is determined by SGID(flow gate index) and FMID(flow meter index). Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Xiaoliang Yang
|
23e2c506ad |
net: mscc: ocelot: add gate and police action offload to PSFP
PSFP support gate and police action. This patch add the gate and police action to flower parse action, check chain ID to determine which block to offload. Adding psfp callback functions to add, delete and update gate and police in PSFP table if hardware supports it. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Xiaoliang Yang
|
0568c3bf3f |
net: mscc: ocelot: add MAC table stream learn and lookup operations
ocelot_mact_learn_streamdata() can be used in VSC9959 to overwrite an
FDB entry with stream data. The stream data includes SFID and SSID which
can be used for PSFP and FRER set.
ocelot_mact_lookup() can be used to check if the given {DMAC, VID} FDB
entry is exist, and also can retrieve the DEST_IDX and entry type for
the FDB entry.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|