IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's not needed as the REQ_F_BUFFER_SELECTED flag tracks the state of
whether or not kbuf is valid, so just drop it.
Suggested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have io_kiocb->buf_index which is used for either fixed buffers, or
for provided buffers. For the latter, it's used to hold the buffer group
ID for buffer selection. Post selection, req->kbuf->bid is used to get
the buffer ID.
Store the buffer ID, when selected, in req->buf_index. If we do end up
recycling the buffer, reset it back to the buffer group ID.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are mutually exclusive - if you use provided buffers, then you
cannot use fixed buffers and vice versa. Move them into the same spot
in the io_kiocb, which is also advantageous for provided buffers as
they get near the submit side hot cacheline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Callers already have room to store the addr and length information,
clean it up by having the caller just assign the previously provided
data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a plain array for any group ID that's less than 64, and punt
anything beyond that to an xarray. 64 fits in a page even for 4KB
page sizes and with the planned additions.
This makes the expected group usage faster by avoiding a hash and lookup
to find our list, and it uses less memory upfront by not allocating any
memory for provided buffers unless it's actually being used.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The read/write opcodes use it already, but the recv/recvmsg do not. If
we switch them over and read and validate this at init time while we're
checking if the opcode supports it anyway, then we can do it in one spot
and we don't have to pass in a separate group ID for io_buffer_select().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no point in validity checking buf_index if the request doesn't
have REQ_F_BUFFER_SELECT set, as we will never use it for that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the recent changes, this is direct call to io_buffer_select()
anyway. With this change, there are no wrappers left for provided
buffer selection.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For all of send/sendmsg and recv/recvmsg we have the local 'sr' variable,
yet some cases still use req->sr_msg which sr points to. Use 'sr'
consistently.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_RECVSEND_POLL_FIRST is set for recv/recvmsg or send/sendmsg,
then we arm poll first rather than attempt a receive or send upfront.
This can be useful if we expect there to be no data (or space) available
for the request, as we can then avoid wasting time on the initial
issue attempt.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't punt this check to the op prep handlers, add the support to
io_op_defs and we can check them while setting up the request.
This reduces the text size by 500 bytes on aarch64, and makes this less
fragile by having the check in one spot and needing opcodes to opt in
to IOPOLL or ioprio support.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The IORING_SQ_NEED_WAKEUP flag is now set using atomic_or() which
implies a full barrier on some architectures but it is not required to
do so. Use the more appropriate smp_mb__after_atomic() which avoids the
extra barrier on those architectures.
Signed-off-by: Almog Khaikin <almogkh@gmail.com>
Link: https://lore.kernel.org/r/20220426163403.112692-1-almogkh@gmail.com
Fixes: 8018823e6987 ("io_uring: serialize ctx->rings->sq_flags with atomic_or/and")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_COOP_TASKRUN is set to use cooperative scheduling for
running task_work, then IORING_SETUP_TASKRUN_FLAG can be set so the
application can tell if task_work is pending in the kernel for this
ring. This allows use cases like io_uring_peek_cqe() to still function
appropriately, or for the task to know when it would be useful to
call io_uring_wait_cqe() to run pending events.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If this is set, io_uring will never use an IPI to deliver a task_work
notification. This can be used in the common case where a single task or
thread communicates with the ring, and doesn't rely on
io_uring_cqe_peek().
This provides a noticeable win in performance, both from eliminating
the IPI itself, but also from avoiding interrupting the submitting
task unnecessarily.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While doing so, switch SQPOLL to TWA_SIGNAL_NO_IPI as well, as that
just does a task wakeup and then we can remove the special wakeup we
have in task_work_add.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-5-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than require ctx->completion_lock for ensuring that we don't
clobber the flags, use the atomic bitop helpers instead. This removes
the need to grab the completion_lock, in preparation for needing to set
or clear sq_flags when we don't know the status of this lock.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20220426014904.60384-3-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IO_URING_SCM_ALL isn't set, as it would not be on 32-bit builds,
then we trigger a warning:
fs/io_uring.c: In function '__io_sqe_files_unregister':
fs/io_uring.c:8992:13: warning: unused variable 'i' [-Wunused-variable]
8992 | int i;
| ^
Move the ifdef up to include the 'i' variable declaration.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5e45690a1c ("io_uring: store SCM state in io_fixed_file->file_ptr")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now io_uring will not actively inform userspace if a CQE is
dropped. This is extremely rare, requiring a CQ ring overflow, as well as
a GFP_ATOMIC kmalloc failure. However the consequences could cause for
example applications to go into an undefined state, possibly waiting for a
CQE that never arrives.
Return an error code (EBADR) in these cases. Since this is expected to be
incredibly rare, try and avoid as much as possible affecting the hot code
paths, and so it only is returned lazily and when there is no other
available CQEs.
Once the error is returned, reset the error condition assuming the user is
either ok with it or will clean up appropriately.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-6-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_enter returns the count submitted preferrably over an error
code. In some code paths this check is not required, so reorganise the
code so that the check is only done as needed.
This is also a prep for returning error codes only in waiting scenarios.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-4-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trace cqe overflows in io_uring. Print ocqe before the check, so if it is
NULL it indicates that it has been dropped.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220421091345.2115755-3-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently check REQ_F_POLLED before arming async poll for a
notification to retry. If it's set, then we don't allow poll and will
punt to io-wq instead. This is done to prevent a situation where a buggy
driver will repeatedly return that there's space/data available yet we
get -EAGAIN.
However, if we already transferred data, then it should be safe to rely
on poll again. Gate the check on whether or not REQ_F_PARTIAL_IO is
also set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Like commit 7ba89d2af1 for recv/recvmsg, support MSG_WAITALL for the
send side. If this flag is set and we do a short send, retry for a
stream of seqpacket socket.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than match on a specific key, be it user_data or file, allow
canceling any request that we can lookup. Works like
IORING_ASYNC_CANCEL_ALL in that it cancels multiple requests, but it
doesn't key off user_data or the file.
Can't be set with IORING_ASYNC_CANCEL_FD, as that's a key selector.
Only one may be used at the time.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220418164402.75259-6-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently sqe->addr must contain the user_data of the request being
canceled. Introduce the IORING_ASYNC_CANCEL_FD flag, which tells the
kernel that we're keying off the file fd instead for cancelation. This
allows canceling any request that a) uses a file, and b) was assigned the
file based on the value being passed in.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220418164402.75259-5-axboe@kernel.dk
The current cancelation will lookup and cancel the first request it
finds based on the key passed in. Add a flag that allows to cancel any
request that matches they key. It completes with the number of requests
found and canceled, or res < 0 if an error occured.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220418164402.75259-4-axboe@kernel.dk
In preparation for being able to not only key cancel off the user_data,
pass in the io_cancel_data struct for the various functions that deal
with request cancelation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20220418164402.75259-3-axboe@kernel.dk
Move ->timeout_lock grabbing inside of io_timeout_cancel(), so
we can do io_req_task_queue_fail() outside of the lock. It's much nicer
than relying on triple nested locking.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cde758c2897930d31e205ed8f476d4ec879a8849.1650458197.git.asml.silence@gmail.com
[axboe: drop now wrong timeout_lock annotation]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed SCM accounting for non-unix sockets, as those
are the only ones that can cause a fixed file reference. While that is
true, it also means we're now dereferencing the file as part of the
workqueue driven __io_sqe_files_unregister() after the process has
exited. This isn't safe for SCM files, as unix gc may have already
reaped them when the process exited. KASAN complains about this:
[ 12.307040] Freed by task 0:
[ 12.307592] kasan_save_stack+0x28/0x4c
[ 12.308318] kasan_set_track+0x28/0x38
[ 12.309049] kasan_set_free_info+0x24/0x44
[ 12.309890] ____kasan_slab_free+0x108/0x11c
[ 12.310739] __kasan_slab_free+0x14/0x1c
[ 12.311482] slab_free_freelist_hook+0xd4/0x164
[ 12.312382] kmem_cache_free+0x100/0x1dc
[ 12.313178] file_free_rcu+0x58/0x74
[ 12.313864] rcu_core+0x59c/0x7c0
[ 12.314675] rcu_core_si+0xc/0x14
[ 12.315496] _stext+0x30c/0x414
[ 12.316287]
[ 12.316687] Last potentially related work creation:
[ 12.317885] kasan_save_stack+0x28/0x4c
[ 12.318845] __kasan_record_aux_stack+0x9c/0xb0
[ 12.319976] kasan_record_aux_stack_noalloc+0x10/0x18
[ 12.321268] call_rcu+0x50/0x35c
[ 12.322082] __fput+0x2fc/0x324
[ 12.322873] ____fput+0xc/0x14
[ 12.323644] task_work_run+0xac/0x10c
[ 12.324561] do_notify_resume+0x37c/0xe74
[ 12.325420] el0_svc+0x5c/0x68
[ 12.326050] el0t_64_sync_handler+0xb0/0x12c
[ 12.326918] el0t_64_sync+0x164/0x168
[ 12.327657]
[ 12.327976] Second to last potentially related work creation:
[ 12.329134] kasan_save_stack+0x28/0x4c
[ 12.329864] __kasan_record_aux_stack+0x9c/0xb0
[ 12.330735] kasan_record_aux_stack+0x10/0x18
[ 12.331576] task_work_add+0x34/0xf0
[ 12.332284] fput_many+0x11c/0x134
[ 12.332960] fput+0x10/0x94
[ 12.333524] __scm_destroy+0x80/0x84
[ 12.334213] unix_destruct_scm+0xc4/0x144
[ 12.334948] skb_release_head_state+0x5c/0x6c
[ 12.335696] skb_release_all+0x14/0x38
[ 12.336339] __kfree_skb+0x14/0x28
[ 12.336928] kfree_skb_reason+0xf4/0x108
[ 12.337604] unix_gc+0x1e8/0x42c
[ 12.338154] unix_release_sock+0x25c/0x2dc
[ 12.338895] unix_release+0x58/0x78
[ 12.339531] __sock_release+0x68/0xec
[ 12.340170] sock_close+0x14/0x20
[ 12.340729] __fput+0x18c/0x324
[ 12.341254] ____fput+0xc/0x14
[ 12.341763] task_work_run+0xac/0x10c
[ 12.342367] do_notify_resume+0x37c/0xe74
[ 12.343086] el0_svc+0x5c/0x68
[ 12.343510] el0t_64_sync_handler+0xb0/0x12c
[ 12.344086] el0t_64_sync+0x164/0x168
We have an extra bit we can use in file_ptr on 64-bit, use that to store
whether this file is SCM'ed or not, avoiding the need to look at the
file contents itself. This does mean that 32-bit will be stuck with SCM
for all registered files, just like 64-bit did before the referenced
commit.
Fixes: 1f59bc0f18 ("io_uring: don't scm-account for non af_unix sockets")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_queue_sqe() is a part of the submission path and we try hard to keep
it inlined, so shed some extra bytes from it by moving the error
checking part into io_queue_sqe_arm_apoll() and renaming it accordingly.
note: io_queue_sqe_arm_apoll() is not inlined, thus the patch doesn't
change the number of function calls for the apoll path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9b79edd246336decfaca79b949a15ac69123490d.1650056133.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
