IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Some older laptops using cs35l41 use firmware which does not support
the CSPL_MBOX_CMD_SPK_OUT_ENABLE command.
Firmware versions v0.28.0 and older do not support this command.
Fixes: fa3efcc36a ("ALSA: cs35l41: Use mbox command to enable speaker output for external boost")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117163609.823627-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code checks for the correct state transition after sending
a command. However, it is possible for the message box to return -1,
which indicates an error, if an error has occurred in the firmware.
We can detect if the error has occurred, and return a different error.
In addition, there is no recovering from a CSPL error, so the retry
mechanism is not needed in this case, and we can return immediately.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231026150558.2105827-9-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure the chip has correctly reset during probe and system suspend,
we need to force a software reset, in case of systems where the
hardware reset is not available.
The software reset register was labelled as volatile but not readable,
however, it is readable, (just returns 0x0). Adding it to readable
registers means it will be correctly treated as volatile, and thus
will not be cached.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231026150558.2105827-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.
Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.
Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare(). That is where cs35l41_global_enable() is called
from.
Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start(). Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.
Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.
Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.
Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.
Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately. This also avoids
having to wait unnecessarily for the second time.
Fixes: f8264c7592 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return code of regmap_multi_reg_write() call related to "MDSYNC
down" sequence is shadowed by the subsequent
wait_for_completion_timeout() invocation, which is expected to time
timeout in case the write operation failed.
Let cs35l41_global_enable() return the correct error code instead of
-ETIMEDOUT.
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS/t9MACgkQJNaLcl1U
h9Dg4wf+Njvy5zphgUJlSJ7vNj7GtzgldnWwfQrb+19BOtv5HHIYg4e/Yr4eWdgc
rg5DGIGvr8sxYQ44TCA59sXdTuakkNF/ejDoj8AwNsr/J3sD6S+FTkV8qLFcgQ3r
+0ElZ26I2kd6gfvDlwHfa5rJVPCa7vrg3o6EHccqRX9CSyPJRlwRqRRj+w8ftZtV
rZ7Gapz3E4A3mBo7VIO/kEgI1uSmaShM8d4HoVmxJEKJ6lbyX8SIXMBzZVq5z/iX
DcnRaMPAMhgzytmdDJ7SjJuxL0EOd6p8Lnk0jILvO6U30Z7aTunzMuK/o0GHqFkm
eHveoHIU4gbt3YqDFgPosPlxi4OCgw==
=KJZq
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6-early' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.6
Here's an initial batch of updates for ASoC for this release cycle.
We've got a bunch of new drivers in here, a bit of core work from
Morimoto-san and quite a lot of janitorial work. There's several
updates that pull in changes from other subsystems in order to build
on them:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes.
- Create a library function for intlog10() and use it in the NAU8825
driver.
- Include the ASoC tests, including the topology tests, in the default
KUnit full test coverage. This also involves enabling UML builds of
ALSA since that's the default KUnit test environment which pulls in
the addition of some stubs to the driver.
- More factoring out from Morimoto-san.
- Convert a lot of drivers to use the more modern maple tree register
cache.
- Support for AMD machines with MAX98388 and NAU8821, Cirrus Logic
CS35L36, Intel AVS machines with ES8336 and RT5663 and NXP i.MX93.
To ensure the chip has correctly powered up or down before continuing,
the driver will now poll a register, rather than wait a fixed delay.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To enable the speaker output in external boost mode, 2 registers must
be set, one after another. The longer the time between the writes of
the two registers, the more likely, and more loudly a pop may occur.
To minimize this, an mbox command can be used to allow the firmware
to perform this action, minimizing any delay between write, thus
minimizing any pop or click as a result. The old method will remain
when running without firmware.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230721151816.2080453-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache. In
v6.5 it has also acquired the ability to generate multi-register writes in
sync operations, bringing performance up to parity with the rbtree cache
there.
Update the cs35l41 driver to use the more modern data structure.
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230713-asoc-cirrus-maple-v1-2-a62651831735@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Shared boost allows two amplifiers to share a single boost circuit by
communicating on the MDSYNC bus.
The passive amplifier does not control the boost and receives data from
the active amplifier.
Shared Boost is not supported in HDA Systems.
Based on David Rhodes shared boost patches.
Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Link: https://lore.kernel.org/r/20230223084324.9076-4-lucas.tanure@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623105120.1981154-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When waking from hibernation, it is possible for the function
which sends the wake command to fail initially, but after a
retry it will succeed. There is no need to print an error if
the initial attempts fail.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-11-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the CS35L41 HDA driver also support hibernation, it
makes sense to move code from the ASoC driver to enter
hibernation into common code.
Since HDA must support laptops which do not support hibernation
due to lack of external boost GPIO it is necessary to
ensure the function returns an error when an unsupported
boost type is in use.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-12-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CS35L41 HDA Driver will support hibernation using DSP firmware,
move the exit hibernate function into shared code so this can
be reused.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-10-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a big update, partly due to the addition of some larger
drivers (more of which is to follow since at least the AVS driver is
still a work in progress) and partly due to Charles' work sorting out
our handling of endianness. As has been the case recently it's much
more about drivers than the core.
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs.
- Initial stages of Intel AVS driver merge.
- Introduction of v4 IPC mechanism for SOF.
- TDM mode support for AK4613.
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLf5EACgkQJNaLcl1U
h9ASqAf/YnwbFP919ree/DEKUDCNc4klUH5M4JOexXbZlZDqxKYRGZjoLuiwX/PQ
Au/xOjGEvm3Yg5/g5c8YFVNcIkv1O8VclRkV59oIxlBwKmQeTKvq+lOmlel2l1wZ
XOmvHjE46wxH1N1cLwL6KkX0YDn59orSZGYZRpfLjL61y6LQWsLNU0tY6AWCRATB
Llnrbu+DYgCsYNTEOOOY5s4V+4LkQm8TLdft91Va7mBdkPPRFoXRO0HGcVBqbkoN
7pf2mrjrLAWL9yuA8FlrgJbHq58DF9WGe5uEU7qlVL1zw46ClgIM0ABxPOdNdjV2
Wzb1jI7GmztgQNxlR9BcJB0kxAj9vA==
=oD5l
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.19
This is quite a big update, partly due to the addition of some larger
drivers (more of which is to follow since at least the AVS driver is
still a work in progress) and partly due to Charles' work sorting out
our handling of endianness. As has been the case recently it's much
more about drivers than the core.
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs.
- Initial stages of Intel AVS driver merge.
- Introduction of v4 IPC mechanism for SOF.
- TDM mode support for AK4613.
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
This can then be used by HDA code to configure cs_dsp.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This sequence is required to setup firmware, and will
be needed for hda driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This function is used to control the DSP Firmware for cs35l41,
and will be needed by the cs35l41 hda driver, when firmware
support is added.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for external boost voltage, where GPIO1 must control a
switch to isolate CS35L41 from the external Boost Voltage
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220413083728.10730-17-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Internal Boost enable is the default option from reset, but with
external boost support, internal boost must be disabled.
Add the enable of internal boost in cs35l41_boost_config to
centralize the internal boost configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-10-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver can receive an empty hw_config, so mark as valid if
successfully read from device tree/ACPI or set by the driver itself.
Platforms not marked with a valid hw config will not be supported.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-3-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers
a warning calltrace like below:
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0
================================================================================
UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
When both bitoffset and otp_map[i].size are 0, the line 836 will
result in GENMASK(-1, 0), this triggers the shift-out-of-bounds
calltrace.
Here add a checking, if both bitoffset and otp_map[i].size are 0,
do not run GENMASK() and directly set otp_val to 0, this will not
bring any function change on the driver but could avoid the calltrace.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in
the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN
to report a shift-out-of-bounds warning in the cs35l41_otp_unpack()
since the last entry in the array will result in GENMASK(-1, 0).
UBSAN reports this problem:
UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c]
i2c_device_probe+0x252/0x2b0
Fixes: 6450ef5590 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328123535.50000-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs35l41 supports a low power DSP memory retention mode. Add support
for entering this mode when then device is not in use.
Co-authored-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for the addition of PM runtime support move the test
key out of the register patches themselves. This is necessary to
allow the test key to be held during cache synchronisation, which is
required by the OTP settings which were unpacked from the device and
written by the driver.
Also whilst at it, the driver uses a mixture of accessing the test key
register by name and by address, consistently use the name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes no sense to cache the test/user key registers, since they
require values written at specific times, mark them volatile. It is
probably best if they can't be accessed from user-space either, so
mark them precious as well.
The interrupt force, edge, polarity and debounce are all settings
applied to the IRQ rather than status bits and as such should not be
volatile.
The OTP trim values will require re-application in the event of a
cache sync and as such should not be volatile. The OTPID however
should be volatile.
The DSP scratch registers are used to read back an error/debug code
from the DSP on shutdown, as such these should be marked volatile.
Finally, add some missing defaults, add TST_FS_MON0, and allow the
DSP core control register to be cached.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC and HDA systems require the same errata patches, so
move it to the shared code using a function the correctly
applies the patches by revision
Also, move CS35L41_DSP1_CCM_CORE_CTRL write to errata
patch function as is required to be written at boot,
but not in regmap_register_patch sequence as will affect
waking up from hibernation
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-5-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC and HDA systems for all revisions of CS35L41 will benefit
from having this initialization, so add it to reg_sequence of
each revision
By moving to reg_sequence all gains are set to zero. And boost,
monitoring parts, and class D amplifier are disabled.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support CS35L41 in HDA systems the HDA driver
for CS35L41 would have to duplicate some functions
that already exist on ASoC driver
So instead of duplicate the code, use the new lib
source as a shared resource for both ASoC and HDA
Also, change the way CONFIG_SND_SOC_CS35L41 is
selected, as reported by Intel Kernel test robot,
it is possible to build SND_SOC_CS35L41_SPI/I2C
without the main driver, which would lead to build
failures.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211217115708.882525-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
