IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before this change, when operating in polled mode, i.e. no IRQ is
available, every individual C45 access would be hit with a 150us sleep
after the bus access.
For example, on a board with a CN9130 SoC connected to an MV88X3310
PHY, a single C45 read would take around 165us:
root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 165ms
By replacing the long sleep with a tighter poll loop, we observe a 10x
increase in bus throughput:
root@infix:~$ mdio f212a600.mdio-mii mmd 4:1 bench 0xc003
Performed 1000 reads in 15ms
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20231204100811.2708884-3-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ynl.h has a growing amount of "internal" stuff, which may confuse
users who try to take a look at the external API. Currently the
internals are at the bottom of the file with a banner in between,
but this arrangement makes it hard to add external APIs / inline
helpers which need internal definitions.
Move internals to a separate header.
Link: https://lore.kernel.org/r/20231202211225.342466-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If kernel didn't give use any meaningful error - print
a strerror() to the ynl error message.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20231202211310.342716-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1768d8a767f8 ("tools/net/ynl: Add support for create flags")
added support for setting legacy netlink CRUD flags on netlink
messages (NLM_F_REPLACE, _EXCL, _CREATE etc.).
Most of genetlink won't need these, don't force callers to pass
in an empty argument to each do() call.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231202211005.341613-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20231117095922.876489-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/49795ee930be6a9a24565e5e7133e6f8383ab532.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/b0488fa6181a47668e5737905ae7adc8d7cd055e.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8c9ffca75ea24810f9ba05a514d5ad59847cc4fe.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/7c1d50d559c0e0e36a20eb3e410f6e9d3f884b6f.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231117095922.876489-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/82b728e14a68c421e269eff3b8083d9d6e62d956.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/4889ac6a7ffa9b02fa5cdd2d3212e739741f80b8.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/c43193b9a002e88da36b111bb44ce2973ecde722.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function exceeds the stack frame warning limit:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pri':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:1039:1: error: the frame size of 1408 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Use dynamic allocation for the largest stack object instead. It
would be nice to rewrite this file to completely avoid the extra
buffer and just use the one that was already allocated by debugfs,
but that is a much larger change.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231204085735.4112882-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ynl-generated user space C code is already above 25kLoC
and is growing.
The initial reason to commit these files was to make reviewing changes
to the generator easier. Unfortunately, it has the opposite effect on
reviewing changes to specs, and we get far more changes to specs
than to the generator.
Uncommit those fails, as they are generated on the fly as needed.
netdev patchwork now runs a script on each series to create a diff
of generated code on the fly, for the rare cases when looking at
it is helpful:
https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.sh
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Austin says:
====================
sfc: Implement ndo_hwtstamp_(get|set)
Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena.
====================
Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231130135826.19018-2-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .parse_protocol hook function in the ipvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Ipvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130438.2266343-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .parse_protocol hook function in the macvlan_header_ops structure is
not implemented. As a result, when the AF_PACKET family is used to send
packets, skb->protocol will be set to 0.
Macvlan is a device of type ARPHRD_ETHER (ether_setup). Therefore, use
eth_header_parse_protocol function to obtain the protocol.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231202130658.2266526-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
Conver net selftests to run in unique namespace (Part 1)
As Guillaume pointed, many selftests create namespaces with very common
names (like "client" or "server") or even (partially) run directly in init_net.
This makes these tests prone to failure if another namespace with the same
name already exists. It also makes it impossible to run several instances
of these tests in parallel.
This patch set intend to conver all the net selftests to run in unique namespace,
so we can update the selftest freamwork to run all tests in it's own namespace
in parallel. After update, we only need to wait for the test which need
longest time.
As the total patch set is too large. I break it to severl parts. This is
the first part.
v2 -> v3:
- Convert all ip netns del to cleanup_ns (Justin Iurman)
v1 -> v2:
- Split the large patch set to small parts for easy review (Paolo Abeni)
- Move busywait from forwarding/lib.sh to net/lib.sh directly (Petr Machata)
- Update setup_ns/cleanup_ns struct (Petr Machata)
- Remove default trap in lib.sh (Petr Machata)
====================
Link: https://lore.kernel.org/r/20231202020110.362433-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel [ OK ]
TEST: IPv6 route through L2TP tunnel [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./ioam6.sh
--------------------------------------------------------------------------
OUTPUT tests
--------------------------------------------------------------------------
TEST: Unknown IOAM namespace (inline mode) [ OK ]
TEST: Unknown IOAM namespace (encap mode) [ OK ]
TEST: Missing trace room (inline mode) [ OK ]
TEST: Missing trace room (encap mode) [ OK ]
TEST: Trace type with bit 0 only (inline mode) [ OK ]
...
TEST: Full supported trace (encap mode) [ OK ]
--------------------------------------------------------------------------
GLOBAL tests
--------------------------------------------------------------------------
TEST: Forward - Full supported trace (inline mode) [ OK ]
TEST: Forward - Full supported trace (encap mode) [ OK ]
- Tests passed: 88
- Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./icmp.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
# ./icmp_redirect.sh
###########################################################################
Legacy routing
###########################################################################
TEST: IPv4: redirect exception [ OK ]
...
TEST: IPv4: mtu exception plus redirect [ OK ]
TEST: IPv6: mtu exception plus redirect [ OK ]
Tests passed: 40
Tests failed: 0
Tests xfailed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./traceroute.sh
TEST: IPV6 traceroute [ OK ]
TEST: IPV4 traceroute [ OK ]
Tests passed: 2
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./drop_monitor_tests.sh
Software drops test
TEST: Capturing active software drops [ OK ]
TEST: Capturing inactive software drops [ OK ]
Hardware drops test
TEST: Capturing active hardware drops [ OK ]
TEST: Capturing inactive hardware drops [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./cmsg_ipv6.sh
OK
]# ./cmsg_so_mark.sh
OK
]# ./cmsg_time.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
2 tests also failed without this patch
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./arp_ndisc_evict_nocarrier.sh
run arp_evict_nocarrier=1 test
ok
run arp_evict_nocarrier=0 test
ok
run all.arp_evict_nocarrier=0 test
ok
run ndisc_evict_nocarrier=1 test
ok
run ndisc_evict_nocarrier=0 test
ok
run all.ndisc_evict_nocarrier=0 test
ok
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-01 (ice)
This series contains updates to ice driver only.
Konrad provides temperature reporting via hwmon.
Arkadiusz adds reporting of Clock Generation Unit (CGU) information via
devlink info.
Pawel adjusts error messaging for ntuple filters to account for additional
possibility for encountering an error.
Karol ensures that all timestamps occurring around reset are processed and
renames some E822 functions to convey additional usage for E823 devices.
Jake provides mechanism to ensure that all timestamps on E822 devices
are processed.
The following are changes since commit 15bc81212f593fbd7bda787598418b931842dc14:
octeon_ep: set backpressure watermark for RX queues
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================
Link: https://lore.kernel.org/r/20231201180845.219494-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When code is applicable for both E822 and E823 devices, rename it from
E822 to E82X.
ICE_PHY_PER_NAC_E822 was unused, so just remove it.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The E822 hardware for Tx timestamping keeps track of how many
outstanding timestamps are still in the PHY memory block. It will not
generate a new interrupt to the MAC until all of the timestamps in the
region have been read.
If somehow all the available data is not read, but the driver has exited
its interrupt routine already, the PHY will not generate a new interrupt
even if new timestamp data is captured. Because no interrupt is
generated, the driver never processes the timestamp data. This state
results in a permanent failure for all future Tx timestamps.
It is not clear how the driver and hardware could enter this state.
However, if it does, there is currently no recovery mechanism.
Add a recovery mechanism via the periodic PTP work thread which invokes
ice_ptp_periodic_work(). Introduce a new check,
ice_ptp_maybe_trigger_tx_interrupt() which checks the PHY timestamp
ready bitmask. If any bits are set, trigger a software interrupt by
writing to PFINT_OICR.
Once triggered, the main timestamp processing thread will read through
the PHY data and clear the outstanding timestamp data. Once cleared, new
data should trigger interrupts as expected.
This should allow recovery from such a state rather than leaving the
device in a state where we cannot process Tx timestamps.
It is possible that this function checks for timestamp data
simultaneously with the interrupt, and it might trigger additional
unnecessary interrupts. This will cause a small amount of additional
processing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During reset, TX_TSYN interrupt should be processed as it may process
timestamps in brief moments before and after reset.
Timestamping should be enabled on VSIs at the end of reset procedure.
On ice_get_phy_tx_tstamp_ready error, interrupt should not be rearmed
because error only happens on resets.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Supported number of ntuple filters affect also maximum location value that
can be provided to ethtool command. Update error message to provide info
about max supported value.
Fix double spaces in the error messages.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If Clock Generation Unit is present on NIC board user shall know its
details.
Provide the devlink info callback with a new:
- fixed type object (cgu.id) indicating hardware variant of onboard CGU,
- running type object (fw.cgu) consisting of CGU id, config and firmware
versions.
These information shall be known for debugging purposes.
Test (on NIC board with CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu
cgu.id 36
fw.cgu 8032.16973825.6021
Test (on NIC board without CGU)
$ devlink dev info <bus_name>/<dev_name> | grep cgu -c
0
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pedro Tammela says:
====================
net/sched: act_api: contiguous action arrays
When dealing with action arrays in act_api it's natural to ask if they
are always contiguous (no NULL pointers in between). Yes, they are in
all cases so far, so make use of the already present tcf_act_for_each_action
macro to explicitly document this assumption.
There was an instance where it was not, but it was refactorable (patch 2)
to make the array contiguous.
v1->v2:
- Respin
- Added Jamal's acked-by
====================
Link: https://lore.kernel.org/r/20231201175015.214214-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The actions array is contiguous, so stop processing whenever a NULL
is found. This is already the assumption for tcf_action_destroy[1],
which is called from tcf_actions_init.
[1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ops array is contiguous, so stop processing whenever a NULL is found
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcf_action_add, when putting the reference for the bound actions
it assigns NULLs to just created actions passing a non contiguous
array to tcf_action_put_many.
Refactor the code so the actions array is always contiguous.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the auxiliary macro tcf_act_for_each_action in all the
functions that expect a contiguous action array
Suggested-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
Doc: update bridge doc
The current bridge kernel doc is too old. It only pointed to the
linuxfoundation wiki page which lacks of the new features.
Here let's start the new bridge document and put all the bridge info
so new developers and users could catch up the last bridge status soon.
v3 -> v4:
- Patch01: Reference and borrow definitions from the IEEE 802.1Q-2022 standard
for bridge (Stephen Hemminger)
- Patch04: Remind that kAPI is unstable. Add back sysfs part, but only note
that sysfs is deprecated. (Stephen Hemminger, Florian Fainelli)
- Patch05: Mention the RSTP and IEEE 802.1D developing info. (Stephen Hemminger)
- Some other grammar fixes.
v2 -> v3:
- Split the bridge doc update and adding kAPI/uAPI field to 2 part (Nikolay Aleksandrov)
- Update bridge and bridge enum descriptions (Nikolay Aleksandrov)
- Add user space stp help for STP doc (Vladimir Oltean)
v1 -> v2:
- Update bridge and bridge port enum descriptions (Vladimir Oltean)
RFCv3 -> v1:
- Fix up various typos, grammar and technical issues (Nikolay Aleksandrov)
RFCv2 -> RFCv3:
- Update netfilter part (Florian Westphal)
- Break the one large patch in to multiparts for easy reviewing. Please tell
me if I break it too much.. (Nikolay Aleksandrov)
- Update the description of each enum and doc (Nikolay Aleksandrov)
- Add more descriptions for STP/Multicast/VLAN.
RFCv1 -> RFCv2:
- Drop the python tool that generate iproute man page from kernel doc
====================
Link: https://lore.kernel.org/r/20231201081951.1623069-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add some features that are not appropriate for the existing section to
the "Others" part of the bridge document.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add switchdev part for bridge document.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
