IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 977a3009547dad4a5bc95d91be4a58c9f7eedac0 upstream.
Type 3 instruction fault (FPU insn with FPU disabled) is handled
by quietly enabling FPU and returning. Which is fine, except that
we need to do that both for fault in userland and in the kernel;
the latter *can* legitimately happen - all it takes is this:
.global _start
_start:
call_pal 0xae
lda $0, 0
ldq $0, 0($0)
- call_pal CLRFEN to clear "FPU enabled" flag and arrange for
a signal delivery (SIGSEGV in this case).
Fixed by moving the handling of type 3 into the common part of
do_entIF(), before we check for kernel vs. user mode.
Incidentally, the check for kernel mode is unidiomatic; the normal
way to do that is !user_mode(regs). The difference is that
the open-coded variant treats any of bits 63..3 of regs->ps being
set as "it's user mode" while the normal approach is to check just
the bit 3. PS is a 4-bit register and regs->ps always will have
bits 63..4 clear, so the open-coded variant here is actually equivalent
to !user_mode(regs). Harder to follow, though...
Cc: stable@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e027253c4b77d395798600a90b6a96fe4adf4d5e upstream.
The fallocate will try to clear the suid/sgid if a unprevileged user
changed the file.
There is no POSIX item requires that we should clear the suid/sgid
in fallocate code path but this is the default behaviour for most of
the filesystems and the VFS layer. And also the same for the write
code path, which have already support it.
And also we need to update the time stamps since the fallocate will
change the file contents.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/58054
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7c4d9b133c7a04ca619355574e96b6abf209fba upstream.
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.
Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.
It looks like these checks were accidentally lost during the conversion to
fileattr API.
Fixes: 72227eac177d ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e4505e617a80f601e2f53a917611777f128f925 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 408ab6786dbf6dd696488054c9559681112ef994 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af4ab377543853b690cc85b4c46cf976ab560dc2 upstream.
SDX55 uses the Qcom version of the SMMU-500 IP. So use "qcom,smmu-500"
compatible as the fallback to the SoC specific compatible.
Cc: <stable@vger.kernel.org> # 5.12
Fixes: a2bdfdfba2af ("ARM: dts: qcom: sdx55: Enable ARM SMMU")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123131931.263024-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8eb29c4fbf9661e6bd4dd86197a37ffe0ecc9d50 upstream.
The function page_address does not work with 32-bit systems with high
memory. Use bvec_kmap_local/kunmap_local instead.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream.
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa56b9b75996ff4c76a0a4181c2fa0206c3d91cc upstream.
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream.
The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.
It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.
For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.
Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.
Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908d4bb7c54caa58253a363d63e797a468eaf321 upstream.
On default driver load device gets configured with unexpected
higher interrupt coalescing values instead of default expected
values as memory allocated from krealloc() is not supposed to
be zeroed out and may contain garbage values.
Fix this by allocating the memory of required size first with
kcalloc() and then use krealloc() to resize and preserve the
contents across down/up of the interface.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Fixes: b0ec5489c480 ("qede: preserve per queue stats across up/down of interface")
Cc: stable@vger.kernel.org
Cc: Bhaskar Upadhaya <bupadhaya@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2160054
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 015b8cc5e7c4d7bb671f1984d7b7338c310b185b upstream.
Key information in wext.connect is not reset on (re)connect and can hold
data from a previous connection.
Reset key data to avoid that drivers or mac80211 incorrectly detect a
WEP connection request and access the freed or already reused memory.
Additionally optimize cfg80211_sme_connect() and avoid an useless
schedule of conn_work.
Fixes: fffd0934b939 ("cfg80211: rework key operation")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230124141856.356646-1-alexander@wetzel-home.de
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c15430822e71e90203d87e6d0cfe83fa058b0dc upstream.
When ath11k runs into internal errors upon suspend,
it returns an error code to pci_pm_suspend, which
aborts the entire system suspend.
The driver should not abort system suspend, but should
keep its internal errors to itself, and allow the system
to suspend. Otherwise, a user can suspend a laptop
by closing the lid and sealing it into a case, assuming
that is will suspend, rather than heating up and draining
the battery when in transit.
In practice, the ath11k device seems to have plenty of transient
errors, and subsequent suspend cycles after this failure
often succeed.
https://bugzilla.kernel.org/show_bug.cgi?id=216968
Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a86aa9a1892d60ef2e3f310f5b42b8b05546d65 upstream.
The Realtek rate control algorithm goes back and forth a lot between
the highest and the lowest rate it's allowed to use. This is due to
a lot of frames being dropped because the retry limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS are too low. (Experimentally, they
are 4 for long frames and 7 for short frames.)
The vendor drivers hardcode the value 48 for both retry limits (for
station mode), which makes dropped frames very rare and thus the rate
control is more stable.
Because most Realtek chips handle the rate control in the firmware,
which can't be modified, ignore the limits set by
IEEE80211_CONF_CHANGE_RETRY_LIMITS and use the value 48 (set during
chip initialisation), same as the vendor drivers.
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/477d745b-6bac-111d-403c-487fc19aa30d@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ca44fcef241768fd25ee763b3d203b9852f269b upstream.
Otherwise the while() loop in dm_wq_work() can result in a "dead
loop" on systems that have preemption disabled. This is particularly
problematic on single cpu systems.
Cc: stable@vger.kernel.org
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7533afa1d27ba1234146d31d2402c195cf195962 upstream.
Device mapper sends an uevent when the device is suspended, using the
function set_capacity_and_notify. However, this causes a race condition
with udev.
Udev skips scanning dm devices that are suspended. If we send an uevent
while we are suspended, udev will be racing with device mapper resume
code. If the device mapper resume code wins the race, udev will process
the uevent after the device is resumed and it will properly scan the
device.
However, if udev wins the race, it will receive the uevent, find out that
the dm device is suspended and skip scanning the device. This causes bugs
such as systemd unmounting the device - see
https://bugzilla.redhat.com/show_bug.cgi?id=2158628
This commit fixes this race.
We replace the function set_capacity_and_notify with set_capacity, so that
the uevent is not sent at this point. In do_resume, we detect if the
capacity has changed and we pass a boolean variable need_resize_uevent to
dm_kobject_uevent. dm_kobject_uevent adds "RESIZE=1" to the uevent if
need_resize_uevent is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Peter Rajnoha <prajnoha@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0f0cfdc3a024e21161714f2e05f0df3b84d42ad upstream.
spi_nor_set_erase_type() was used either to set or to mask out an erase
type. When we used it to mask out an erase type a shift-out-of-bounds
was hit:
UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24
shift exponent 4294967295 is too large for 32-bit type 'int'
The setting of the size_{shift, mask} and of the opcode are unnecessary
when the erase size is zero, as throughout the code just the erase size
is considered to determine whether an erase type is supported or not.
Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF
is an unused opcode. Thus when masking out an erase type, just set the
erase size to zero. This will fix the shift-out-of-bounds.
Fixes: 5390a8df769e ("mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories")
Cc: stable@vger.kernel.org
Reported-by: Alexander Stein <Alexander.Stein@tq-group.com>
Signed-off-by: Louis Rannou <lrannou@baylibre.com>
Tested-by: Alexander Stein <Alexander.Stein@tq-group.com>
Link: https://lore.kernel.org/r/20230203070754.50677-1-tudor.ambarus@linaro.org
[ta: refine changes, new commit message, fix compilation error]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f592a869f87723314f0cb1ac232bd3bf8245be8 upstream.
CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
definition, stop using magic numbers and describe the missing bit fields
in CFR5 register. This is useful for both readability and future possible
addition of Octal STR mode support.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Cc: stable@vger.kernel.org
Reported-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/linux-mtd/20230110164703.83413-1-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6b9bd7290d334451ce054e98e752abc055e0034 upstream.
Following process will make data lost and could lead to a filesystem
corrupted problem:
1. jh(bh) is inserted into T1->t_checkpoint_list, bh is dirty, and
jh->b_transaction = NULL
2. T1 is added into journal->j_checkpoint_transactions.
3. Get bh prepare to write while doing checkpoing:
PA PB
do_get_write_access jbd2_log_do_checkpoint
spin_lock(&jh->b_state_lock)
if (buffer_dirty(bh))
clear_buffer_dirty(bh) // clear buffer dirty
set_buffer_jbddirty(bh)
transaction =
journal->j_checkpoint_transactions
jh = transaction->t_checkpoint_list
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
// bh won't be flushed
jbd2_cleanup_journal_tail
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved)
4. Aborting journal/Power-cut before writing latest bh on journal area.
In this way we get a corrupted filesystem with bh's data lost.
Fix it by moving the clearing of buffer_dirty bit just before the call
to __jbd2_journal_file_buffer(), both bit clearing and jh->b_transaction
assignment are under journal->j_list_lock locked, so that
jbd2_log_do_checkpoint() will wait until jh's new transaction fininshed
even bh is currently not dirty. And journal_shrink_one_cp_list() won't
remove jh from checkpoint list if the buffer head is reused in
do_get_write_access().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216898
Cc: <stable@kernel.org>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110015327.1181863-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 951606a14a8901e3551fe4d8d3cedd73fe954ce1 upstream.
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c16bda37594f83147b167d381d54c010024efecf upstream.
If we get woken spuriously when polling and fail the operation with
-EAGAIN again, then we generally only allow polling again if data
had been transferred at some point. This is indicated with
REQ_F_PARTIAL_IO. However, if the spurious poll triggers when the socket
was originally empty, then we haven't transferred data yet and we will
fail the poll re-arm. This either punts the socket to io-wq if it's
blocking, or it fails the request with -EAGAIN if not. Neither condition
is desirable, as the former will slow things down, while the latter
will make the application confused.
We want to ensure that a repeated poll trigger doesn't lead to infinite
work making no progress, that's what the REQ_F_PARTIAL_IO check was
for. But it doesn't protect against a loop post the first receive, and
it's unnecessarily strict if we started out with an empty socket.
Add a somewhat random retry count, just to put an upper limit on the
potential number of retries that will be done. This should be high enough
that we won't really hit it in practice, unless something needs to be
aborted anyway.
Cc: stable@vger.kernel.org # v5.10+
Link: https://github.com/axboe/liburing/issues/364
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7605c43d67face310b4b87dee1a28bc0c8cd8c0f upstream.
MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.
Remove MSG_NOSIGNAL from io_recvmsg_prep().
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edd478269640b360c6f301f2baa04abdda563ef3 upstream.
If two or more mappings go back to back to each other they can be passed
into io_uring to be registered as a single registered buffer. That would
even work if mappings came from different sources, e.g. it's possible to
mix in this way anon pages and pages from shmem or hugetlb. That is not
a problem but it'd rather be less prone if we forbid such mixing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f2bb1ffc9983e227424d0787289da5483b0c74f upstream.
Just like for task_work, set the task mode to TASK_RUNNING before doing
potential resume work. We're not holding any locks at this point,
but we may have already set the task state to TASK_INTERRUPTIBLE in
preparation for going to sleep waiting for events. Ensure that we set it
back to TASK_RUNNING if we have work to process, to avoid warnings on
calling blocking operations with !TASK_RUNNING.
Fixes: b5d3ae202fbf ("io_uring: handle TIF_NOTIFY_RESUME when checking for task_work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302062208.24d3e563-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5d3ae202fbfe055aa2a8ae8524531ee1dcab717 upstream.
If TIF_NOTIFY_RESUME is set, then we need to call resume_user_mode_work()
for PF_IO_WORKER threads. They never return to usermode, hence never get
a chance to process any items that are marked by this flag. Most notably
this includes the final put of files, but also any throttling markers set
by block cgroups.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6044cc3030e139f60c281386f28bda6e3049d66 upstream.
When preparing an AER-CTR request, the driver copies the key provided by
the user into a data structure that is accessible by the firmware.
If the target device is QAT GEN4, the key size is rounded up by 16 since
a rounded up size is expected by the device.
If the key size is rounded up before the copy, the size used for copying
the key might be bigger than the size of the region containing the key,
causing an out-of-bounds read.
Fix by doing the copy first and then update the keylen.
This is to fix the following warning reported by KASAN:
[ 138.150574] BUG: KASAN: global-out-of-bounds in qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.150641] Read of size 32 at addr ffffffff88c402c0 by task cryptomgr_test/2340
[ 138.150651] CPU: 15 PID: 2340 Comm: cryptomgr_test Not tainted 6.2.0-rc1+ #45
[ 138.150659] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0087.D13.2208261706 08/26/2022
[ 138.150663] Call Trace:
[ 138.150668] <TASK>
[ 138.150922] kasan_check_range+0x13a/0x1c0
[ 138.150931] memcpy+0x1f/0x60
[ 138.150940] qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat]
[ 138.151006] qat_alg_skcipher_init_sessions+0xc1/0x240 [intel_qat]
[ 138.151073] crypto_skcipher_setkey+0x82/0x160
[ 138.151085] ? prepare_keybuf+0xa2/0xd0
[ 138.151095] test_skcipher_vec_cfg+0x2b8/0x800
Fixes: 67916c951689 ("crypto: qat - add AES-CTR support for QAT GEN4 devices")
Cc: <stable@vger.kernel.org>
Reported-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Vladis Dronov <vdronov@redhat.com>
Tested-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8932c32c3053accd50702b36e944ac2016cd103c upstream.
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes: afb7da83b9f4 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3b7ab025e931accdc2c12acf9b75c6197f1c062 upstream.
In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.
Replace the bogus disposal with a WARN_ON().
This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.
Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e6f75c9c98d2d246d90411ff2b6f0cd271f4cba upstream.
Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().
The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.
Fixes: b62b2cf5759b ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f883c38f5628f46b30bccf090faec054088e262 upstream.
The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.
This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).
Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.
Fixes: 9dc6be3d4193 ("genirq/irqdomain: Add map counter")
Cc: stable@vger.kernel.org # 4.13
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b06730a571a9ff1ba5bd6b20bf9e50e5a12f1ec6 upstream.
The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes: ddaf144c61da ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4971c268b85e1c7a734a61622fc0813c86e2362e upstream.
Commit 98de59bfe4b2f ("take calculation of final prot in
security_mmap_file() into a helper") moved the code to update prot, to be
the actual protections applied to the kernel, to a new helper called
mmap_prot().
However, while without the helper ima_file_mmap() was getting the updated
prot, with the helper ima_file_mmap() gets the original prot, which
contains the protections requested by the application.
A possible consequence of this change is that, if an application calls
mmap() with only PROT_READ, and the kernel applies PROT_EXEC in addition,
that application would have access to executable memory without having this
event recorded in the IMA measurement list. This situation would occur for
example if the application, before mmap(), calls the personality() system
call with READ_IMPLIES_EXEC as the first argument.
Align ima_file_mmap() parameters with those of the mmap_file LSM hook, so
that IMA can receive both the requested prot and the final prot. Since the
requested protections are stored in a new variable, and the final
protections are stored in the existing variable, this effectively restores
the original behavior of the MMAP_CHECK hook.
Cc: stable@vger.kernel.org
Fixes: 98de59bfe4b2 ("take calculation of final prot in security_mmap_file() into a helper")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db0ccc44a20b4bb3039c0f6885a1f9c3323c7673 upstream.
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e02b50ca442e88122e1302d4dbc1b71a4808c13f upstream.
Explain why STIBP is needed with legacy IBRS as currently implemented
(KERNEL_IBRS) and why STIBP is not needed when enhanced IBRS is enabled.
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230227060541.1939092-2-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream.
When plain IBRS is enabled (not enhanced IBRS), the logic in
spectre_v2_user_select_mitigation() determines that STIBP is not needed.
The IBRS bit implicitly protects against cross-thread branch target
injection. However, with legacy IBRS, the IBRS bit is cleared on
returning to userspace for performance reasons which leaves userspace
threads vulnerable to cross-thread branch target injection against which
STIBP protects.
Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for
enabling STIBP (through seccomp/prctl() by default or always-on, if
selected by spectre_v2_user kernel cmdline parameter).
[ bp: Massage. ]
Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS")
Reported-by: José Oliveira <joseloliveira11@gmail.com>
Reported-by: Rodrigo Branco <rodrigo@kernelhacking.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org
Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ff6edf4fef38ab404ee7861f257e28eaaeed35f upstream.
The AMD side of the loader has always claimed to support mixed
steppings. But somewhere along the way, it broke that by assuming that
the cached patch blob is a single one instead of it being one per
*node*.
So turn it into a per-node one so that each node can stash the blob
relevant for it.
[ NB: Fixes tag is not really the exactly correct one but it is good
enough. ]
Fixes: fe055896c040 ("x86/microcode: Merge the early microcode loader")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org> # 2355370cd941 ("x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter")
Cc: <stable@kernel.org> # a5ad92134bd1 ("x86/microcode/AMD: Add a @cpu parameter to the reloading functions")
Link: https://lore.kernel.org/r/20230130161709.11615-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5ad92134bd153a9ccdcddf09a95b088f36c3cce upstream.
Will be used in a subsequent change.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130161709.11615-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.
When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.
Since the following commit:
commit f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.
The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.
The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.
Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
