IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 3e5e479a39ce9ed60cd63f7565cc1d9da77c2a4e upstream.
As Youling reported in mailing list:
https://www.linuxquestions.org/questions/linux-newbie-8/the-file-system-f2fs-is-broken-4175666043/https://www.linux.org/threads/the-file-system-f2fs-is-broken.26490/
There is a test case can corrupt f2fs image:
- dd if=/dev/zero of=/swapfile bs=1M count=4096
- chmod 600 /swapfile
- mkswap /swapfile
- swapon --discard /swapfile
The root cause is f2fs_swap_activate() intends to return zero value
to setup_swap_extents() to enable SWP_FS mode (swap file goes through
fs), in this flow, setup_swap_extents() setups swap extent with wrong
block address range, result in discard_swap() erasing incorrect address.
Because f2fs_swap_activate() has pinned swapfile, its data block
address will not change, it's safe to let swap to handle IO through
raw device, so we can get rid of SWAP_FS mode and initial swap extents
inside f2fs_swap_activate(), by this way, later discard_swap() can trim
in right address range.
Fixes: 4969c06a0d83 ("f2fs: support swap file w/ DIO")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60588bfa223ff675b95f866249f90616613fbe31 upstream.
select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :
1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
introduces a way to limit how many CPUs we scan.
But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.
Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.
Fixes: 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcfbc617547fc6d9552cb6c1c563b6a90ee98085 upstream.
When reading/writing using the guest/host cache, check for a bad hva
before checking for a NULL memslot, which triggers the slow path for
handing cross-page accesses. Because the memslot is nullified on error
by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after
crossing into a new page, then the kvm_{read,write}_guest() slow path
could potentially write/access the first chunk prior to detecting the
bad hva.
Arguably, performing a partial access is semantically correct from an
architectural perspective, but that behavior is certainly not intended.
In the original implementation, memslot was not explicitly nullified
and therefore the partial access behavior varied based on whether the
memslot itself was null, or if the hva was simply bad. The current
behavior was introduced as a seemingly unintentional side effect in
commit f1b9dd5eb86c ("kvm: Disallow wraparound in
kvm_gfn_to_hva_cache_init"), which justified the change with "since some
callers don't check the return code from this function, it sit seems
prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking
the result of the cache initialization, which is arguably a bug in its
own right, at best simply weird.
Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.")
Cc: Jim Mattson <jmattson@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52918ed5fcf05d97d257f4131e19479da18f5d16 upstream.
The KVM MMIO support uses bit 51 as the reserved bit to cause nested page
faults when a guest performs MMIO. The AMD memory encryption support uses
a CPUID function to define the encryption bit position. Given this, it is
possible that these bits can conflict.
Use svm_hardware_setup() to override the MMIO mask if memory encryption
support is enabled. Various checks are performed to ensure that the mask
is properly defined and rsvd_bits() is used to generate the new mask (as
was done prior to the change that necessitated this patch).
Fixes: 28a1f3ac1d0c ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c9f329b084b7b8ea6d60d91a202e884cdcf6aae upstream.
Commit 7afb94da3cd8 ("mwifiex: update set_mac_address logic") fixed the
only user of this function, partly because the author seems to have
noticed that, as written, it's on the borderline between highly
misleading and buggy.
Anyway, no sense in keeping dead code around: let's drop it.
Fixes: 7afb94da3cd8 ("mwifiex: update set_mac_address logic")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70e5b8f445fd27fde0c5583460e82539a7242424 upstream.
Before commit 1e58252e334d ("mwifiex: Fix heap overflow in
mmwifiex_process_tdls_action_frame()"),
mwifiex_process_tdls_action_frame() already had too many magic numbers.
But this commit just added a ton more, in the name of checking for
buffer overflows. That seems like a really bad idea.
Let's make these magic numbers a little less magic, by
(a) factoring out 'pos[1]' as 'ie_len'
(b) using 'sizeof' on the appropriate source or destination fields where
possible, instead of bare numbers
(c) dropping redundant checks, per below.
Regarding redundant checks: the beginning of the loop has this:
if (pos + 2 + pos[1] > end)
break;
but then individual 'case's include stuff like this:
if (pos > end - 3)
return;
if (pos[1] != 1)
return;
Note that the second 'return' (validating the length, pos[1]) combined
with the above condition (ensuring 'pos + 2 + length' doesn't exceed
'end'), makes the first 'return' (whose 'if' can be reworded as 'pos >
end - pos[1] - 2') redundant. Rather than unwind the magic numbers
there, just drop those conditions.
Fixes: 1e58252e334d ("mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b98149c2377bff12be5dd3ce02ae0506e2dd613 upstream.
It's over-zealous to return hard errors under RCU-walk here, given that
a REF-walk will be triggered for all other cases handling ".." under
RCU.
The original purpose of this check was to ensure that if a rename occurs
such that a directory is moved outside of the bind-mount which the
resolution started in, it would be detected and blocked to avoid being
able to mess with paths outside of the bind-mount. However, triggering a
new REF-walk is just as effective a solution.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 397d425dc26d ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1fbfcb4a20949df08dd995927cdc5ad220c128d upstream.
Commit 2dffd23f81a3 ("kbuild: make single target builds much faster")
made the situation much better.
To improve it even more, apply the similar idea to the top Makefile.
Trim unrelated directories from build-dirs.
The single build code must be moved above the 'descend' target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35e046a203ee3bc8ba9ae3561b50de02646dfb81 upstream.
When single-build is set, everything in $(MAKECMDGOALS) is a single
target. You can use $(MAKECMDGOALS) to list out the single targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ecaf069da52e472d393f03e79d721aabd724166 upstream.
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.
It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcbb8461fd2376ba3782b5b8bd440c929b8e4980 upstream.
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[ added to 5.4.y due to start of build warnings from backported patches
because of this feature - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9167c8078c3527de6da241c8a1a75a9224ed90a upstream.
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 470793a78ce344bd53d31e0c2d537f71ba957547 upstream.
As the name suggests ETH_RSS_HASH_NO_CHANGE is received upon changing
the key or indirection table using ethtool while keeping the same hash
function.
Also add a function for retrieving the current hash function from
the ena-com layer.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 369537c97024dca99303a8d4d6ab38b4f54d3909 upstream.
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be
zero for SMCD.
Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 380ec5b9af7f0d57dbf6ac067fd9f33cff2fef71 upstream.
Code inspection found that in case of mapping error we do return current
'ret' value. But beside error, it is used to count number of descriptors
allocated for the packet. In that case map_skb function could return '1'.
Changing it to return zero (number of mapped descriptors for skb)
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4980919ad6a7be548d499bc5338015e1a9191c6 upstream.
skb->len is used to calculate statistics after xmit invocation.
Under a stress load it may happen that skb will be xmited,
rx interrupt will come and skb will be freed, all before xmit function
is even returned.
Eventually, skb->len will access unallocated area.
Moving stats calculation into tx_clean routine.
Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Reported-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Pavel Belous <pbelous@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a20773beeeeadec41477a5ba872175b778ff752 upstream.
Since nl_groups is a u32 we can't bind more groups via ->bind
(netlink_bind) call, but netlink has supported more groups via
setsockopt() for a long time and thus nlk->ngroups could be over 32.
Recently I added support for per-vlan notifications and increased the
groups to 33 for NETLINK_ROUTE which exposed an old bug in the
netlink_bind() code causing out-of-bounds access on archs where unsigned
long is 32 bits via test_bit() on a local variable. Fix this by capping the
maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively
capping them at 32 which is the minimum of allocated groups and the
maximum groups which can be bound via netlink_bind().
CC: Christophe Leroy <christophe.leroy@c-s.fr>
CC: Richard Guy Briggs <rgb@redhat.com>
Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f3846f0955308b6d1b219419da42b8de2c08845 upstream.
When getting or setting VNICC parameters, the error code EOPNOTSUPP
should have precedence over EBUSY.
EBUSY is used because vnicc feature and bridgeport feature are mutually
exclusive, which is a temporary condition.
Whereas EOPNOTSUPP indicates that the HW does not support all or parts of
the vnicc feature.
This issue causes the vnicc sysfs params to show 'blocked by bridgeport'
for HW that does not support VNICC at all.
Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9515743bfb39c61aaf3d4f3219a645c8d1fe9a0e upstream.
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca4b43c14cd88d28cfc6467d2fa075aad6818f1d upstream.
To work properly on every architectures and compilers, the enum value
needs to be specific numbers.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/1580537624-10179-1-git-send-email-peter.chen@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6f13c125e05603f68f5bf31f045b95e6d493598 upstream.
When netvsc_attach() is called by operations like changing MTU, etc.,
an extra wakeup may happen while netvsc_attach() calling
rndis_filter_device_add() which sends rndis messages when queue is
stopped in netvsc_detach(). The completion message will wake up queue 0.
We can reproduce the issue by changing MTU etc., then the wake_queue
counter from "ethtool -S" will increase beyond stop_queue counter:
stop_queue: 0
wake_queue: 1
The issue causes queue wake up, and counter increment, no other ill
effects in current code. So we didn't see any network problem for now.
To fix this, initialize tx_disable to true, and set it to false when
the NIC is ready to be attached or registered.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a04960560640ac5b0b89461f7757322b57d0c7a upstream.
This if_change_rule is not working properly; it cannot detect any
command line change.
The reason is because cmd-check in scripts/Kbuild.include compares
$(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here.
For if_change_rule to work properly, the stem part of cmd_* and rule_*
must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must
be named rule_dtc.
Fixes: 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0daa63ed4c6c4302790ce67b7a90c0997ceb7514 upstream.
The below-mentioned commit changed the code to unlock *inside*
the function, but previously the unlock was *outside*. It failed
to remove the outer unlock, however, leading to double unlock.
Fix this.
Fixes: 33483a6b88e4 ("mac80211: fix missing unlock on error in ieee80211_mark_sta_auth()")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20200221104719.cce4741cf6eb.I671567b185c8a4c2409377e483fd149ce590f56d@changeid
[rewrite commit message to better explain what happened]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9951ebfcdf2b97dbb28a5d930458424341e61aa2 upstream.
If nl80211_parse_he_obss_pd() fails, we leak the previously
allocated ACL memory. Free it in this case.
Fixes: 796e90f42b7e ("cfg80211: add support for parsing OBBS_PD attributes")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200221104142.835aba4cdd14.I1923b55ba9989c57e13978f91f40bfdc45e60cbd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b549c252b1292aea959cd9b83537fcb9384a6112 upstream.
Deleting dmabuf item's list head after releasing its container can lead
to KASAN-reported issue:
BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0
Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119
So fix this issue by puting deleting dmabuf_objs ahead of releasing its
container.
Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e661cedcc0a072d91a32cb88e0515ea26e35711 upstream.
The printout for txabrt is way too talkative and is highly annoying with
scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest
can be gained by I2C core debugging and datasheet information. Also,
make it a debug printout, it won't help the regular user.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54498e8070e19e74498a72c7331348143e7e1f8c upstream.
Factor out 100 from the equation and do 32-bit arithmetic (3 * clk_mhz / 10)
instead of 64-bit.
Notice that clk_mhz is MHz, so the multiplication will never wrap 32 bits
and there is no need for div_u64().
Addresses-Coverity: 1458369 ("Unintentional integer overflow")
Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver")
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bef8e2dfceed6daeb6ca3e8d33f9c9d43b926580 upstream.
Pointer on the memory allocated by 'alloc_progmem()' is stored in
'v->load_addr'. So this is this memory that should be freed by
'release_progmem()'.
'release_progmem()' is only a call to 'kfree()'.
With the current code, there is both a double free and a memory leak.
Fix it by passing the correct pointer to 'release_progmem()'.
Fixes: e01402b115ccc ("More AP / SP bits for the 34K, the Malta bits and things. Still wants")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: ralf@linux-mips.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c02c447eaeda29d3da121a2e17b97ccaf579b51 upstream.
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect().
The hiddev_disconnect() function sets "hiddev->exist = 0;" so
hiddev_release() can free it as soon as we drop the "existancelock"
lock. This patch moves the mutex_unlock(&hiddev->existancelock) until
after we have finished using it.
Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com
Fixes: 7f77897ef2b6 ("HID: hiddev: fix potential use-after-free")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d2e77b39b8fecb794e19cd006a12f90b14dd077 upstream.
They are issues:
- if 'input_allocate_device()' fails and return NULL, there is no need
to free anything and 'input_free_device()' call is a no-op. It can
be axed.
- 'ret' is known to be 0 at this point, so we must set it to a
meaningful value before returning
Fixes: 2562756dde55 ("HID: add Alps I2C HID Touchpad-Stick support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4a3922d2d20c710f827d3a115ee338e8d0467df upstream.
It is unnecessary to hold hashlimit_mutex for htable_destroy()
as it is already removed from the global hashtable and its
refcount is already zero.
Also, switch hinfo->use to refcount_t so that we don't have
to hold the mutex until it reaches zero in htable_put().
Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8af1c6fbd9239877998c7f5a591cb2c88d41fb66 upstream.
When the forceadd option is enabled, the hash:* types should find and replace
the first entry in the bucket with the new one if there are no reuseable
(deleted or timed out) entries. However, the position index was just not set
to zero and remained the invalid -1 if there were no reuseable entries.
Reported-by: syzbot+6a86565c74ebe30aea18@syzkaller.appspotmail.com
Fixes: 23c42a403a9c ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42d84c8490f9f0931786f1623191fcab397c3d64 upstream.
Doing so, we save one call to get data we already have in the struct.
Also, since there is no guarantee that getname use sockaddr_ll
parameter beyond its size, we add a little bit of security here.
It should do not do beyond MAX_ADDR_LEN, but syzbot found that
ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25,
versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro).
Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67f562e3e147750a02b2a91d21a163fc44a1d13e upstream.
SMC does not work together with FASTOPEN. If sendmsg() is called with
flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to
fallback mode. To handle the previous ioctl FIOASYNC call correctly
in this case, it is necessary to transfer the socket wait queue
fasync_list to the internal TCP socket.
Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com
Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f66ee0410b1c3481ee75e5db9b34547b4d582465 upstream.
In the case of huge hash:* types of sets, due to the single spinlock of
a set the processing of the whole set under spinlock protection could take
too long.
There were four places where the whole hash table of the set was processed
from bucket to bucket under holding the spinlock:
- During resizing a set, the original set was locked to exclude kernel side
add/del element operations (userspace add/del is excluded by the
nfnetlink mutex). The original set is actually just read during the
resize, so the spinlocking is replaced with rcu locking of regions.
However, thus there can be parallel kernel side add/del of entries.
In order not to loose those operations a backlog is added and replayed
after the successful resize.
- Garbage collection of timed out entries was also protected by the spinlock.
In order not to lock too long, region locking is introduced and a single
region is processed in one gc go. Also, the simple timer based gc running
is replaced with a workqueue based solution. The internal book-keeping
(number of elements, size of extensions) is moved to region level due to
the region locking.
- Adding elements: when the max number of the elements is reached, the gc
was called to evict the timed out entries. The new approach is that the gc
is called just for the matching region, assuming that if the region
(proportionally) seems to be full, then the whole set does. We could scan
the other regions to check every entry under rcu locking, but for huge
sets it'd mean a slowdown at adding elements.
- Listing the set header data: when the set was defined with timeout
support, the garbage collector was called to clean up timed out entries
to get the correct element numbers and set size values. Now the set is
scanned to check non-timed out entries, without actually calling the gc
for the whole set.
Thanks to Florian Westphal for helping me to solve the SOFTIRQ-safe ->
SOFTIRQ-unsafe lock order issues during working on the patch.
Reported-by: syzbot+4b0e9d4ff3cf117837e5@syzkaller.appspotmail.com
Reported-by: syzbot+c27b8d5010f45c666ed1@syzkaller.appspotmail.com
Reported-by: syzbot+68a806795ac89df3aa1c@syzkaller.appspotmail.com
Fixes: 23c42a403a9c ("netfilter: ipset: Introduction of new commands and protocol version 7")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d876836204897b6d7d911f942084f69a1e9d5c4d upstream.
We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise
the iovec import for these commands will not do the right thing and fail
the command with -EINVAL.
Found by running the test suite compiled as 32-bit.
Cc: stable@vger.kernel.org
Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()")
Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5739cb0b56590d68d8df8a44659893b6d0084c3 upstream.
Before commit 1e4f63aecb53 ("cpufreq: Avoid creating excessively
large stack frames") the initial value of the policy field in struct
cpufreq_policy set by the driver's ->init() callback was implicitly
passed from cpufreq_init_policy() to cpufreq_set_policy() if the
default governor was neither "performance" nor "powersave". After
that commit, however, cpufreq_init_policy() must take that case into
consideration explicitly and handle it as appropriate, so make that
happen.
Fixes: 1e4f63aecb53 ("cpufreq: Avoid creating excessively large stack frames")
Link: https://lore.kernel.org/linux-pm/39fb762880c27da110086741315ca8b111d781cd.camel@gmail.com/
Reported-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d0e797bf095d407479c89952d42b1d96ef0a7f upstream.
This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14.
The name changing as devfreq(X) breaks some user space applications,
such as Android HAL from Unisoc and Hikey [1].
The device name will be changed unexpectly after every boot depending
on module init sequence. It will make trouble to setup some system
configuration like selinux for Android.
So we'd like to revert it back to old naming rule before any better
way being found.
[1] https://lkml.org/lkml/2018/5/8/1042
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Orson Zhai <orson.unisoc@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78041c0c9e935d9ce4086feeff6c569ed88ddfd4 upstream.
The tracing seftests checks various aspects of the tracing infrastructure,
and one is filtering. If trace_printk() is active during a self test, it can
cause the filtering to fail, which will disable that part of the trace.
To keep the selftests from failing because of trace_printk() calls,
trace_printk() checks the variable tracing_selftest_running, and if set, it
does not write to the tracing buffer.
As some tracers were registered earlier in boot, the selftest they triggered
would fail because not all the infrastructure was set up for the full
selftest. Thus, some of the tests were post poned to when their
infrastructure was ready (namely file system code). The postpone code did
not set the tracing_seftest_running variable, and could fail if a
trace_printk() was added and executed during their run.
Cc: stable@vger.kernel.org
Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38b17afb0ebb9ecd41418d3c08bcf9198af4349d upstream.
Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.
When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.
This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.
Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb12c957735b582607e5842a06d1f4c62e185c1d upstream.
It's the last user, and more importantly, it's the last non-legacy
user of anything in drm_pci.c.
The only tricky bit is the agp initialization. But a close look shows
that radeon does not use the drm_agp midlayer (the main use of that is
drm_bufs for legacy drivers), and instead could use the agp subsystem
directly (like nouveau does already). Hence we can just pull this in
too.
A further step would be to entirely drop the use of drm_device->agp,
but feels like too much churn just for this patch.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a3bddf67ce88b96531fb22c5a75d7f4dc41d155 upstream.
This doesn't do anything except auto-init drm_agp support when you
call drm_get_pci_dev(). Which amdgpu stopped doing with
commit b58c11314a1706bf094c489ef5cb28f76478c704
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Fri Jun 2 17:16:31 2017 -0400
drm/amdgpu: drop deprecated drm_get_pci_dev and drm_put_dev
No idea whether this was intentional or accidental breakage, but I
guess anyone who manages to boot a this modern gpu behind an agp
bridge deserves a price. A price I never expect anyone to ever collect
:-)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Xiaojie Yuan <xiaojie.yuan@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: "Tianci.Yin" <tianci.yin@amd.com>
Cc: "Marek Olšák" <marek.olsak@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream.
We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ebdffd25098898aff1249ae2f7dbfddd76d8f8f upstream.
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.
Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.
Fixes: 966922f26c7f ("HID: fix a crash in hid_report_raw_event()
function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit beae56192a2570578ae45050e73c5ff9254f63e6 upstream.
Commit 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.
Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.
But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).
So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.
This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.
Cc: stable@vger.kernel.org
Fixes: 8f18eca9ebc5 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86f7e90ce840aa1db407d3ea6e9b3a52b2ce923c upstream.
KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.
Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.
Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream.
ACPI Generic Address Structure (GAS) access_width field is not in bytes
as the driver seems to expect in few places so fix this by using the
newly introduced macro ACPI_ACCESS_BYTE_WIDTH().
Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment")
Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
