1058093 Commits

Author SHA1 Message Date
Bjorn Helgaas
800cee8b04 Merge branch 'remotes/lorenzo/pci/aardvark'
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2,
  LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár)

- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers
  (Pali Rohár)

- Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)

- Disable bus mastering when unbinding host controller driver (Pali Rohár)

- Mask all interrupts when unbinding host controller driver (Pali Rohár)

- Fix memory leak in host controller unbind (Pali Rohár)

- Assert PERST# when unbinding host controller driver (Pali Rohár)

- Disable link training when unbinding host controller driver (Pali Rohár)

- Disable common PHY when unbinding host controller driver (Pali Rohár)

- Fix resource type checking to check only IORESOURCE_MEM, not
  IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)

* remotes/lorenzo/pci/aardvark:
  PCI: aardvark: Fix checking for MEM resource type
  PCI: aardvark: Disable common PHY when unbinding driver
  PCI: aardvark: Disable link training when unbinding driver
  PCI: aardvark: Assert PERST# when unbinding driver
  PCI: aardvark: Fix memory leak in driver unbind
  PCI: aardvark: Mask all interrupts when unbinding driver
  PCI: aardvark: Disable bus mastering when unbinding driver
  PCI: aardvark: Comment actions in driver remove method
  PCI: aardvark: Clear all MSIs at setup
  PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers on emulated bridge
  PCI: pci-bridge-emul: Add definitions for missing capabilities registers
  PCI: pci-bridge-emul: Add description for class_revision field
2022-01-13 09:57:46 -06:00
Bjorn Helgaas
d03f92c43f Merge branch 'pci/virtualization'
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it
  can work with an IOMMU (Yifeng Li)

* pci/virtualization:
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
2022-01-13 09:57:45 -06:00
Bjorn Helgaas
54f98a8b13 Merge branch 'pci/switchtec'
- Add Gen4 automotive device IDs (Kelvin Cao)

- Declare state_names[] as static so it's not allocated and initialized for
  every call (Kelvin Cao)

* pci/switchtec:
  PCI/switchtec: Declare local state_names[] as static
  PCI/switchtec: Add Gen4 automotive device IDs
2022-01-13 09:57:45 -06:00
Bjorn Helgaas
05642e2f64 Merge branch 'pci/resource'
- Always write Intel I210 ROM BAR on update to work around device defect
  (Bjorn Helgaas)

* pci/resource:
  PCI: Work around Intel I210 ROM BAR overlap defect
2022-01-13 09:57:45 -06:00
Bjorn Helgaas
c6ff0f8dc0 Merge branch 'pci/p2pdma'
- Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)

- Optimize by using percpu_ref_tryget_live_rcu() inside RCU critical
  section (Christophe JAILLET)

* pci/p2pdma:
  PCI/P2PDMA: Use percpu_ref_tryget_live_rcu() inside RCU critical section
  MAINTAINERS: Add Logan Gunthorpe as P2PDMA maintainer
2022-01-13 09:57:44 -06:00
Bjorn Helgaas
446cc1c51a Merge branch 'pci/legacy-pm-removal'
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to
  generic power management (Vaibhav Gupta)

* pci/legacy-pm-removal:
  via-agp: convert to generic power management
  sis-agp: convert to generic power management
  amd64-agp: convert to generic power management
2022-01-13 09:57:44 -06:00
Bjorn Helgaas
7475f9319a Merge branch 'pci/hotplug'
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner)

- Removed commented-out ibmphp functions (Vihas Mak)

- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)

* pci/hotplug:
  PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
  PCI: ibmphp: Remove commented-out functions
  PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
2022-01-13 09:57:43 -06:00
Bjorn Helgaas
fb6c45130a Merge branch 'pci/enumeration'
- Use pci_find_vsec_capability() instead of open-coding it (Andy
  Shevchenko)

- Convert pci_dev_present() stub from macro to static inline to avoid
  'unused variable' errors (Hans de Goede)

- Convert sysfs slot attributes from default_attrs to default_groups (Greg
  Kroah-Hartman)

- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat
  Jain)

- Remove unnecessary initialization of static variables (Longji Guo)

* pci/enumeration:
  x86/PCI: Remove initialization of static variables to false
  PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
  PCI/sysfs: Use default_groups in kobj_type for slot attrs
  PCI: Convert pci_dev_present() stub to static inline
  PCI: Use pci_find_vsec_capability() when looking for TBT devices
2022-01-13 09:57:43 -06:00
Bjorn Helgaas
7498e41fb5 Merge branch 'pci/aspm'
- Calculate link L0s and L1 exit latencies when needed instead of caching
  them (Saheed O. Bolarinwa)

- Calculate device L0s and L1 acceptable exit latencies when needed instead
  of caching them (Saheed O. Bolarinwa)

- Remove struct aspm_latency since it's no longer needed (Saheed O.
  Bolarinwa)

* pci/aspm:
  PCI/ASPM: Remove struct aspm_latency
  PCI/ASPM: Stop caching device L0s, L1 acceptable exit latencies
  PCI/ASPM: Stop caching link L0s, L1 exit latencies
  PCI/ASPM: Move pci_function_0() upward
2022-01-13 09:57:43 -06:00
Hans de Goede
085a9f4343 PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
Use down_read_nested() and down_write_nested() when taking the
ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in
the path to the PCI root bus as lock subclass parameter.

This fixes the following false-positive lockdep report when unplugging a
Lenovo X1C8 from a Lenovo 2nd gen TB3 dock:

  pcieport 0000:06:01.0: pciehp: Slot(1): Link Down
  pcieport 0000:06:01.0: pciehp: Slot(1): Card not present
  ============================================
  WARNING: possible recursive locking detected
  5.16.0-rc2+ #621 Not tainted
  --------------------------------------------
  irq/124-pciehp/86 is trying to acquire lock:
  ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80

  but task is already holding lock:
  ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180

   other info that might help us debug this:
   Possible unsafe locking scenario:

	 CPU0
	 ----
    lock(&ctrl->reset_lock);
    lock(&ctrl->reset_lock);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  3 locks held by irq/124-pciehp/86:
   #0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
   #1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110
   #2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40

  stack backtrace:
  CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621
  Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021
  Call Trace:
   <TASK>
   dump_stack_lvl+0x59/0x73
   __lock_acquire.cold+0xc5/0x2c6
   lock_acquire+0xb5/0x2b0
   down_read+0x3e/0x50
   pciehp_check_presence+0x23/0x80
   pciehp_runtime_resume+0x5c/0xa0
   device_for_each_child+0x45/0x70
   pcie_port_device_runtime_resume+0x20/0x30
   pci_pm_runtime_resume+0xa7/0xc0
   __rpm_callback+0x41/0x110
   rpm_callback+0x59/0x70
   rpm_resume+0x512/0x7b0
   __pm_runtime_resume+0x4a/0x90
   __device_release_driver+0x28/0x240
   device_release_driver+0x26/0x40
   pci_stop_bus_device+0x68/0x90
   pci_stop_bus_device+0x2c/0x90
   pci_stop_and_remove_bus_device+0xe/0x20
   pciehp_unconfigure_device+0x6c/0x110
   pciehp_disable_slot+0x5b/0xe0
   pciehp_handle_presence_or_link_change+0xc3/0x2f0
   pciehp_ist+0x179/0x180

This lockdep warning is triggered because with Thunderbolt, hotplug ports
are nested. When removing multiple devices in a daisy-chain, each hotplug
port's reset_lock may be acquired recursively. It's never the same lock, so
the lockdep splat is a false positive.

Because locks at the same hierarchy level are never acquired recursively, a
per-level lockdep class is sufficient to fix the lockdep warning.

The choice to use one lockdep subclass per pcie-hotplug controller in the
path to the root-bus was made to conserve class keys because their number
is limited and the complexity grows quadratically with number of keys
according to Documentation/locking/lockdep-design.rst.

Link: https://lore.kernel.org/linux-pci/20190402021933.GA2966@mit.edu/
Link: https://lore.kernel.org/linux-pci/de684a28-9038-8fc6-27ca-3f6f2f6400d7@redhat.com/
Link: https://lore.kernel.org/r/20211217141709.379663-1-hdegoede@redhat.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
2022-01-12 06:42:51 -06:00
Longji Guo
346865f074 x86/PCI: Remove initialization of static variables to false
Remove the initialization of pci_ignore_seg to false which is pointless.

Link: https://lore.kernel.org/r/20211203080758.962-1-guolongji@uniontech.com
Signed-off-by: Longji Guo <guolongji@uniontech.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-11 11:05:35 -06:00
Rajat Jain
4353594eb0 PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
Some devices have an erratum such that they only support DWORD accesses to
some registers.  E.g., this Bayhub O2 device ([VID:DID] = [0x1217:0x8621])
only supports DWORD accesses to LTR latency registers and L1 PM substates
control registers:

  https://github.com/rajatxjain/public_shared/blob/main/OZ711LV2_appnote.pdf

The L1 PM substate control registers are DWORD sized, and hence their
access in the kernel is already DWORD sized, so we don't need to do
anything for them.

However, the LTR registers being WORD sized, are in need of a solution.
Convert the WORD sized accesses to these registers into DWORD sized
accesses while saving and restoring them.

Link: https://lore.kernel.org/r/20211222012105.3438916-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-11 10:41:24 -06:00
Bjorn Helgaas
500b55b05d PCI: Work around Intel I210 ROM BAR overlap defect
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its
Expansion ROM unless both the Memory Space Enable and the Expansion ROM
Enable bit are set.  But apparently some Intel I210 NICs don't work
correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is
disabled.

Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot
v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at
all:

  BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M]
  BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K]
  ROM:   0x40200000 (disabled) [size=1M]

  NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
  Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
  igb 0002:01:00.0 enP2p1s0: Reset adapter

Previously, pci_std_update_resource() wrote the assigned ROM address to the
BAR only when the ROM was enabled.  This meant that the I210 ROM BAR could
be left with an address assigned by firmware, which might overlap with
other BARs.

Quirk these I210 devices so pci_std_update_resource() always writes the
assigned address to the ROM BAR, whether or not the ROM is enabled.

Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas
Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-11 09:33:10 -06:00
Greg Kroah-Hartman
0cf948aab9 PCI/sysfs: Use default_groups in kobj_type for slot attrs
There are currently two ways to create a set of sysfs files for a
kobj_type: through the default_attrs field, and the default_groups field.
Move the PCI slot code to use the default_groups field which has been the
preferred way since aa30f47cf666 ("kobject: Add support for default
attribute groups to kobj_type") so that we can soon get rid of the obsolete
default_attrs field.

Link: https://lore.kernel.org/r/20211228135722.381023-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-29 13:42:04 -06:00
Hans de Goede
877fee2a0c PCI: Convert pci_dev_present() stub to static inline
Change the pci_dev_present() stub which is used when CONFIG_PCI is not set
from a #define to a static inline stub.

Thix should fix clang -Werror builds failing due to errors like this:

  drivers/platform/x86/thinkpad_acpi.c:4475:35:
   error: unused variable 'fwbug_cards_ids' [-Werror,-Wunused-const-variable]

Where fwbug_cards_ids is an array of pci_device_id passed to
pci_dev_present() during a quirk check.

Link: https://lore.kernel.org/r/20211217141515.379586-1-hdegoede@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
2021-12-17 15:23:21 -06:00
Christophe JAILLET
69f457b18f PCI/P2PDMA: Use percpu_ref_tryget_live_rcu() inside RCU critical section
Since pci_alloc_p2pmem() has already called rcu_read_lock(), we're in an
RCU read-side critical section and don't need to take the lock again.  Use
percpu_ref_tryget_live_rcu() instead of percpu_ref_tryget_live() to save a
few cycles.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/ab80164f4d5b32f9e6240aa4863c3a147ff9c89f.1635974126.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-12-15 16:13:13 -06:00
Bjorn Helgaas
133bc542db MAINTAINERS: Add Logan Gunthorpe as P2PDMA maintainer
Add a P2PDMA entry to make sure Logan is aware of changes to that area.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
2021-12-15 16:13:09 -06:00
Yifeng Li
e445375882 PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
Like other SATA controller chips in the Marvell 88SE91xx series, the
Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents
it from working under IOMMU.  Add it to the list of devices that need the
quirk.

Without this patch, device initialization fails with DMA errors:

  ata8: softreset failed (1st FIS failed)
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear
  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear

After applying the patch, the controller can be successfully initialized:

  ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
  ata8.00: ATAPI: PIONEER BD-RW   BDR-207M, 1.21, max UDMA/100
  ata8.00: configured for UDMA/100
  scsi 7:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-207M 1.21 PQ: 0 ANSI: 5

Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work
Reported-by: Sam Bingner <sam@bingner.com>
Tested-by: Sam Bingner <sam@bingner.com>
Tested-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
2021-12-15 14:28:18 -06:00
Vaibhav Gupta
0aeddbd0cb via-agp: convert to generic power management
Convert via-agp from legacy PCI power management to the generic power
management framework.

Previously, via-agp used legacy PCI power management, and agp_via_suspend()
and agp_via_resume() were responsible for both device-specific things and
generic PCI things:

  agp_via_suspend
    pci_save_state(pdev)                <-- generic PCI
    pci_set_power_state(pdev, pci_choose_state(pdev, state)) <-- generic PCI

  agp_via_resume
    pci_set_power_state(pdev, PCI_D0)   <-- generic PCI
    pci_restore_state(pdev)             <-- generic PCI
    via_configure_agp3()                <-- device-specific
    via_configure()                     <-- device-specific

With generic power management, the PCI bus PM methods do the generic PCI
things, and the driver needs only the device-specific part, i.e.,

  suspend_devices_and_enter
    dpm_suspend_start(PMSG_SUSPEND)
      pci_pm_suspend                    # PCI bus .suspend() method
        agp_via_suspend                 <-- not needed at all; removed
    suspend_enter
      dpm_suspend_noirq(PMSG_SUSPEND)
        pci_pm_suspend_noirq            # PCI bus .suspend_noirq() method
          pci_save_state                <-- generic PCI
          pci_prepare_to_sleep          <-- generic PCI
            pci_set_power_state
    ...
    dpm_resume_end(PMSG_RESUME)
      pci_pm_resume                     # PCI bus .resume() method
        pci_restore_standard_config
          pci_set_power_state(PCI_D0)   <-- generic PCI
          pci_restore_state             <-- generic PCI
        agp_via_resume                  # dev->driver->pm->resume
          via_configure_agp3()          <-- device-specific
          via_configure()               <-- device-specific

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20211208193305.147072-4-helgaas@kernel.org
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
2021-12-14 11:26:19 -06:00
Vaibhav Gupta
6d1adc3d46 sis-agp: convert to generic power management
Convert sis-agp from legacy PCI power management to the generic power
management framework.

Previously, sis-agp used legacy PCI power management, and agp_sis_suspend()
and agp_sis_resume() were responsible for both device-specific things and
generic PCI things:

  agp_sis_suspend
    pci_save_state(pdev)                <-- generic PCI
    pci_set_power_state(pdev, pci_choose_state(pdev, state)) <-- generic PCI

  agp_sis_resume
    pci_set_power_state(pdev, PCI_D0)   <-- generic PCI
    pci_restore_state(pdev)             <-- generic PCI
    sis_driver.configure()              <-- device-specific

With generic power management, the PCI bus PM methods do the generic PCI
things, and the driver needs only the device-specific part, i.e.,

  suspend_devices_and_enter
    dpm_suspend_start(PMSG_SUSPEND)
      pci_pm_suspend                    # PCI bus .suspend() method
        agp_sis_suspend                 <-- not needed at all; removed
    suspend_enter
      dpm_suspend_noirq(PMSG_SUSPEND)
        pci_pm_suspend_noirq            # PCI bus .suspend_noirq() method
          pci_save_state                <-- generic PCI
          pci_prepare_to_sleep          <-- generic PCI
            pci_set_power_state
    ...
    dpm_resume_end(PMSG_RESUME)
      pci_pm_resume                     # PCI bus .resume() method
        pci_restore_standard_config
          pci_set_power_state(PCI_D0)   <-- generic PCI
          pci_restore_state             <-- generic PCI
        agp_sis_resume                  # dev->driver->pm->resume
          sis_driver.configure()        <-- device-specific

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20211208193305.147072-3-helgaas@kernel.org
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
2021-12-14 11:26:03 -06:00
Vaibhav Gupta
ec4e4a6fdc amd64-agp: convert to generic power management
Convert amd64-agp from legacy PCI power management to the generic power
management framework.

Previously, amd64-agp used legacy PCI power management, and
agp_amd64_suspend() and agp_amd64_resume() were responsible for both
device-specific things and generic PCI things:

  agp_amd64_suspend
    pci_save_state(pdev)                <-- generic PCI
    pci_set_power_state(pdev, pci_choose_state(pdev, state)) <-- generic PCI

  agp_amd64_resume
    pci_set_power_state(pdev, PCI_D0)   <-- generic PCI
    pci_restore_state(pdev)             <-- generic PCI
    nforce3_agp_init()                  <-- device-specific
    amd_8151_configure()                <-- device-specific

With generic power management, the PCI bus PM methods do the generic PCI
things, and the driver needs only the device-specific part, i.e.,

  suspend_devices_and_enter
    dpm_suspend_start(PMSG_SUSPEND)
      pci_pm_suspend                    # PCI bus .suspend() method
        agp_amd64_suspend               <-- not needed at all; removed
    suspend_enter
      dpm_suspend_noirq(PMSG_SUSPEND)
        pci_pm_suspend_noirq            # PCI bus .suspend_noirq() method
          pci_save_state                <-- generic PCI
          pci_prepare_to_sleep          <-- generic PCI
            pci_set_power_state
    ...
    dpm_resume_end(PMSG_RESUME)
      pci_pm_resume                     # PCI bus .resume() method
        pci_restore_standard_config
          pci_set_power_state(PCI_D0)   <-- generic PCI
          pci_restore_state             <-- generic PCI
        agp_amd64_resume                # dev->driver->pm->resume
          nforce3_agp_init()            <-- device-specific
          amd_8151_configure()          <-- device-specific

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20211208193305.147072-2-helgaas@kernel.org
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
2021-12-14 11:25:15 -06:00
Vihas Mak
e1a6333e7f PCI: ibmphp: Remove commented-out functions
The functions get_max_adapter_speed() and get_bus_name() in ibmphp_core.c
are commented-out and the fields .get_max_adapter_speed and
.get_bus_name_status are removed from struct hotplug_slot_ops in
pci_hotplug.h. Remove the commented-out functions.

Link: https://lore.kernel.org/r/20211209213618.20522-1-makvihas@gmail.com
Signed-off-by: Vihas Mak <makvihas@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-10 09:55:47 -06:00
Pali Rohár
2070b2ddea PCI: aardvark: Fix checking for MEM resource type
IORESOURCE_MEM_64 is not a resource type but a type flag.

Remove incorrect check for type IORESOURCE_MEM_64.

Link: https://lore.kernel.org/r/20211125160148.26029-2-kabel@kernel.org
Fixes: 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-06 10:17:16 +00:00
Pali Rohár
fdbbe242c1 PCI: aardvark: Disable common PHY when unbinding driver
Disable the PCIe PHY when unbinding driver. This should save some power.

Link: https://lore.kernel.org/r/20211130172913.9727-12-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
759dec2e3d PCI: aardvark: Disable link training when unbinding driver
Disable link training circuit in driver unbind sequence. We want to
leave link training in the same state as it was before the driver was
probed.

Link: https://lore.kernel.org/r/20211130172913.9727-11-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
1f54391be8 PCI: aardvark: Assert PERST# when unbinding driver
Put the PCIe card into reset by asserting PERST# signal when unbinding
driver. It doesn't make sense to leave the card working if it can't
communicate with the host. This should also save some power.

Link: https://lore.kernel.org/r/20211130172913.9727-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
2f040a17f5 PCI: aardvark: Fix memory leak in driver unbind
Free config space for emulated root bridge when unbinding driver to fix
memory leak. Do it after disabling and masking all interrupts, since
aardvark interrupt handler accesses config space of emulated root
bridge.

Link: https://lore.kernel.org/r/20211130172913.9727-9-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
13bcdf07cb PCI: aardvark: Mask all interrupts when unbinding driver
Ensure that no interrupt can be triggered after driver unbind.

Link: https://lore.kernel.org/r/20211130172913.9727-8-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
a46f2f6dd4 PCI: aardvark: Disable bus mastering when unbinding driver
Ensure that after driver unbind PCIe cards are not able to forward
memory and I/O requests in the upstream direction.

Link: https://lore.kernel.org/r/20211130172913.9727-7-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
a4ca7948e1 PCI: aardvark: Comment actions in driver remove method
Add two more comments into the advk_pcie_remove() method.

Link: https://lore.kernel.org/r/20211130172913.9727-6-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
7d8dc1f7cd PCI: aardvark: Clear all MSIs at setup
We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT).

Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs,
to ensure that we don't start receiving spurious interrupts.

Use this new mask in advk_pcie_handle_msi();

Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:49 +00:00
Pali Rohár
1d3e170344 PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers on emulated bridge
PCI aardvark hardware supports access to DEVCAP2, DEVCTL2, LNKCAP2 and
LNKCTL2 configuration registers of PCIe core via PCIE_CORE_PCIEXP_CAP.
Export them via emulated software root bridge.

Link: https://lore.kernel.org/r/20211130172913.9727-4-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:48 +00:00
Pali Rohár
8ea673a8b3 PCI: pci-bridge-emul: Add definitions for missing capabilities registers
pci-bridge-emul driver already allocates buffer for capabilities up to the
PCI_EXP_SLTSTA2 register, but does not define bit access behavior for these
registers. Add these missing definitions.

Link: https://lore.kernel.org/r/20211130172913.9727-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:48 +00:00
Pali Rohár
9319230ac1 PCI: pci-bridge-emul: Add description for class_revision field
The current assignment to the class_revision member

  class_revision |= cpu_to_le32(PCI_CLASS_BRIDGE_PCI << 16);

can make the reader think that class is at high 16 bits of the member and
revision at low 16 bits.

In reality, class is at high 24 bits, but the class for PCI Bridge Normal
Decode is PCI_CLASS_BRIDGE_PCI << 8.

Change the assignment and add a comment to make this clearer.

Link: https://lore.kernel.org/r/20211130172913.9727-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-02 09:55:48 +00:00
Saheed O. Bolarinwa
fa285baf84 PCI/ASPM: Remove struct aspm_latency
The struct aspm_latency is now used only inside pcie_aspm_check_latency().

Replace struct aspm_latency variables with u32 variables and remove struct
aspm_latency.

Link: https://lore.kernel.org/r/20211119193732.12343-5-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-11-19 16:46:26 -06:00
Saheed O. Bolarinwa
6e332df7c3 PCI/ASPM: Stop caching device L0s, L1 acceptable exit latencies
Previously we calculated the device's acceptable L0s and L1 exit latencies
in pcie_aspm_cap_init() and cached them in struct pcie_link_state.

These values are only used in pcie_aspm_check_latency() where they are
compared with the actual exit latencies of the link.  This path is used
when removing or changing the D state of the device, so it's relatively low
frequency.

To reduce the amount of per-link data we store, remove the acceptable[]
arrays from struct pcie_link_state and calculate them directly from the
already-cached Device Capabilities register when needed.

[bhelgaas: use endpoint->devcap instead of reading it again]
Link: https://lore.kernel.org/r/20211119193732.12343-4-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-19 16:46:21 -06:00
Saheed O. Bolarinwa
222578dad4 PCI/ASPM: Stop caching link L0s, L1 exit latencies
Previously we calculated the upstream and downstream L0s and L1 exit
latencies of the link in pcie_aspm_cap_init() and cached them in struct
pcie_link_state.latency_*.

These values are only used in pcie_aspm_check_latency() where they are
compared with the acceptable latencies on the link.  This path is used when
removing or changing the D state of the device, so it's relatively low
frequency.

To reduce the amount of per-link data we store, remove the latency_*
entries from struct pcie_link_state and calculate the latencies directly
where they are needed.

Link: https://lore.kernel.org/r/20211119193732.12343-3-refactormyself@gmail.com
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-19 16:46:09 -06:00
Bolarinwa O. Saheed
43262f001b PCI/ASPM: Move pci_function_0() upward
Move pci_function_0() earlier so we can use it from other functions.

Link: https://lore.kernel.org/r/20211119193732.12343-2-refactormyself@gmail.com
Signed-off-by: Bolarinwa O. Saheed <refactormyself@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-11-19 16:15:43 -06:00
Lukas Wunner
23584c1ed3 PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky:  It can only be cleared
after turning off slot power.  Per PCIe r5.0, sec. 6.7.1.8:

  If a power controller detects a main power fault on the hot-plug slot,
  it must automatically set its internal main power fault latch [...].
  The main power fault latch is cleared when software turns off power to
  the hot-plug slot.

The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable
software notification on empty slots").

Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt
race"):  The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set.  That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop.  Fix by setting the
power_fault_detected flag already in the hardirq handler.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race")
Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
Reported-by: Joseph Bao <joseph.bao@intel.com>
Tested-by: Joseph Bao <joseph.bao@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
2021-11-19 12:39:33 -06:00
Kelvin Cao
b76521f648 PCI/switchtec: Declare local state_names[] as static
The local state_names[] array is constant and need not be allocated and
populated each time we enter stuser_set_state().  Declare it as static.

See the link below for the discussion.

  https://lore.kernel.org/r/20211014141859.11444-1-kelvin.cao@microchip.com/

[bhelgaas: simplify commit log]
Suggested-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20211119003803.2333-3-kelvin.cao@microchip.com
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-11-19 12:14:02 -06:00
Kelvin Cao
bb17b15813 PCI/switchtec: Add Gen4 automotive device IDs
Advertise support of the Gen4 automotive variants in module's device ID
table and add the same IDs to the list of switchtec quirks.

Link: https://lore.kernel.org/r/20211119003803.2333-2-kelvin.cao@microchip.com
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-11-19 12:13:50 -06:00
Andy Shevchenko
d2c64f98c3 PCI: Use pci_find_vsec_capability() when looking for TBT devices
Currently set_pcie_thunderbolt() open-codes pci_find_vsec_capability().
Refactor the former to use the latter. No functional change intended.

Link: https://lore.kernel.org/r/20211115112902.24033-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-11-15 14:01:11 -06:00
Linus Torvalds
fa55b7dcdc Linux 5.16-rc1 v5.16-rc1 2021-11-14 13:56:52 -08:00
Gustavo A. R. Silva
dee2b702bc kconfig: Add support for -Wimplicit-fallthrough
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: 9ed4a94d64 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-14 13:27:30 -08:00
Linus Torvalds
ce49bfc8d0 Minor tweaks for 5.16:
* Clean up open-coded swap() calls.
  * A little bit of #ifdef golf to complete the reunification of the
    kernel and userspace libxfs source code.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmGNT1IACgkQ+H93GTRK
 tOucKA//Qk2NX3QBm/8pCrFE5V+eqooPANhZmzeviJCN/6++jcNOy0f+YK6JXVRC
 U2WdotHFH5fF6lsDkzNtMPHZ8JMZmOfEiPx5CGFiWT5iUW7FbLkROHm7GFtbwMoH
 qm3Lt7PbdSzJqTuOTvaGCw1xWkjDXMLdsdFM7mx3JO5zT9a/fCqjjmyR2Kl0qcSP
 RzfruVe20wUka2BeaXfZzSasgfLswratkU4xsiNiwA37yQaldzhrg8fg6uP3OSYi
 dkWFXi6WdWwQzARnjWNPwigUwA3xVaYgV+I6+ME0DYsUBvywZzUg3pkowhRAHyA9
 kv86L5Zt5K7kQcVqyd+lIvIuAcGrOZ9hA18PIXnwahLBqmjcqAJoF9XhTTZDMD4J
 LfujGMrf7DSDcf0vH8G9wlQQthsPGUOoFia5rr8MhdVVNee/b1Qvwsh7kmyg0DOK
 9WuNQxGPd7s+X+kwdmGrK7E6fqyPwEfC43l8wtCiBIyGz6QcorwD7kH9DGzv5xGF
 NX7WQeKvcaoXn1XVfonb0YgdVOnbyqK4AiY3Po1Ood3IxGyiLGCgDnusvYu+C9/r
 T0rRMbljkX1lUKqfzGkg2egOKPR+8RFgFKrKNSXUkDxl8TFLRd3ZObowPPlohq1I
 9lIIirip5UFYRv+7srDU1oZPWkvwkpJmaMFgagD3w+OWdo6zwao=
 =wsFu
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner
2021-11-14 12:18:22 -08:00
Linus Torvalds
c3b68c27f5 parisc architecture build-, trace-, backtrace- and page table fixes
Fix a build error in stracktrace.c, fix resolving of addresses to
 function names in backtraces, fix single-stepping in assembly code
 and flush userspace pte's when using set_pte_at().
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYZAyIAAKCRD3ErUQojoP
 X8zUAQCV4fijXlUEOnZorH42QsSvs1SowHXu2YdHU8CmauWVawEAt14Zj3fmMBcS
 +uSacieZROU9maQtGgJAYHZVJwgPyQY=
 =OQRw
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names
2021-11-14 11:53:59 -08:00
Linus Torvalds
24318ae80d arch/sh updates for 5.16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJhkUvoAAoJELcQ+SIFb8HaQG8H/1pF/zhT+xYAK7dMOYfdyl9R
 UGgnNGR2kjPDhsAkMHIYWVopP2KFV4kA4TCe8UcEt4GPeWZgGjV8lIaHJa/kdUsH
 5tyRYtC8ZtVhJMVJQ8jZYZcTwOqYFFGtCksPq6/j0dHE0Gf+nQStSXNZqi8/XxE9
 c3jDg+l7PVwdl7LWFedPVXcflhD5JLrRhyA/17V0INWrqP/MboXGRyq/Yluksw7x
 C89ZXrgRE+5tN9icfRT4pl/XBpezWQkjuvsyHM9DWOjqICXfng8yeB5MZ/+R2uyF
 qbXRSGqICOFhRRV9m/L0kypCYYiaZ8bBiYvLeGNggmpUJVMosIDFpS7kiYQavuA=
 =dnw0
 -----END PGP SIGNATURE-----

Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations
2021-11-14 11:37:49 -08:00
Linus Torvalds
6ea45c57dc ARM fixes for 5.16-rc1:
- Fix early_iounmap
 - Drop cc-option fallbacks for architecture selection
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmGRL48ACgkQ9OeQG+St
 rGQyXA//ZuMjsA615TncG5686glPds6y+SoiWAPosz9ElGawL5Ke9vybIBPxYrZj
 gSaR4aiyoCy4B22tSQcAuyd8Ai8+cX5jUv7fbgZcCWWQto0OiD3S1jpaGwaPN+3I
 1fwbUvUjrdzzDfGHJbFwBYykkQ8bPWrnjtZ9EK8g9t7QuetqkZrihw/gfqHeflnu
 Ad9WqEiHWDguOU9kdT6uGZf5RpfjwoLuxYNMSQVktQw81+Lk0GGfEroR2ZqUZAf4
 YIrhaKTxjXfkm4Hv6bfLtSYxWY0sw1ziO0qhtEJHKQyE5hbMOy5Dhdq9Ntefkin1
 /+OaNZzLiKuv6ZqWJjg5ViXc0pVgDNfLKbj8aicGW3966F13OISq9MIy9pkivK+2
 R7ROhcdkJ4Tz6sIbAZBxmyFbgY+sjZ0F2OoOkjcLUCfyMGqfl8FohNd6EvSs0yP8
 6zfnUOg4vBkLg80d/lg6RjSszqOSdFjW4Qbi8HQoDYk9bemLPtVxQnjYsd2RMZhM
 oKTkNTcA17MUCYncw6xu2lL3ahz15XMxBf/L2mfFwFCIplKvpTIYbP5BWSisjiyz
 JhbjLj9PaCOmubu+n2JKK4dm0GeEngWhu5CW0xN0eQ0at8CJa9dmt5y3V1V8//jj
 F3Xltms1d67nHr+6pkE+EYp4YMTMBO1L7opsktTs1vCIJ2trTWM=
 =Ksk/
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()
2021-11-14 11:30:50 -08:00
Linus Torvalds
0d1503d8d8 Devicetree fixes for v5.16, take 1:
- 2 fixes due to DT node name changes on Arm, Ltd. boards
 
 - Treewide rename of Ingenic CGU headers
 
 - Update ST email addresses
 
 - Remove Netlogic DT bindings
 
 - Dropping few more cases of redundant 'maxItems' in schemas
 
 - Convert toshiba,tc358767 bridge binding to schema
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmGRN/wQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw0EXD/0byDq/gx0BOgSY18wOWp0W3tnJiudRrKNk
 8+TqfphpridGSzZryboBPQ3U06eOT1pMV9EBzHfqeb87nIneMxZ26KhgMPRFf7qt
 87G2tyfq4Itd59HATC/8xsq/5uiCONksbPojhjn6SrI4wLBzTegIYG5ZiocQw2tP
 vcW9wDAOfcRVfXBtQwmYD7nkeShaoTrv+EBcAFhg4XB43TWyezCCBqvAz0qDSl7q
 N/9xomgsB/fG1ImL/UWjPuPix64I9mrop7d8+C17980RJM10e5wL/eDWpbvWxqy6
 R7nTHT9HWnbcV5ywgBTh3W6iQw9EGyytD0Uzw3v+Meoga1/zCBkF48mEin61nY1c
 i44os73B9mwSZo34qysrFkir+NBNRBAwdP7z+GrarB9twlcIdfjfInQYWlNP73Yb
 zJ/XIVrfn6GsEZRdgXXK5VHL0ffDYzwoGEHSU6m0cTJI+iNQT4WQ89HkhMHG1q0d
 pRwKCE75mhMrwvniBYinL8I8LuMAJPZZKDpc6ZtBJdUdF6MFgXccJFdIBoho1TVL
 oHkaXWwUjkGXliTdWX7UJk4zS4zNAyB1jLT9uHMrLvX7uVM1Dsy9bYWaU4ABB0xr
 viT/gj/nawCbGbniytZEfAAe1bsnZOLqxmqe3XGUgYuOPQLB2xSSjkrr7HYmuLmx
 1AskvHxO0w==
 =ukBC
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14 11:11:51 -08:00
Linus Torvalds
622c72b651 A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because copy_process()
 copies state information which is only valid for the parent task.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmGRDVUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYocOFD/42NOdli73N+Jdq7APHUIHXzu+6DVT6
 CI5toLQw+0KPoF0s1wg4+J0YCDt2k0Pu4lOabF3Ze/+c6RlR5zfCXESqsXdHaCjh
 E91Vs57u0ataRMEHo6KB6eBIutuF8hyxfY6vVXfkTRNAreUIWiwWYrlB0G64JVOG
 +/l1W7adovjLcLwcW+ArrnLJwkBKtXunK6PVv2IrdRHwpMHbwoNRCCCFvzkqnWmQ
 4Yy2/NaB/PEBK5kezP1/j9EMcGCTWk1JJIm+l/PEwCCcbIgIdUahpW3XHAaqms6R
 oukqCvE5ukfmVzBFYBhCamhF8heyEeBVRqGU+Yyk48+I+DQFBCqaqa1NKSuEUdNL
 Nycy6Rp1yn7CHVSB461shMS6NJGOSNDBjv7vxer3WjV3HPJu7y0RrN7jXbkSfQnm
 hVKjkmbDEYwylgzFE5+T857NqD5MEXeuIBtTO08hNRnpd61aB3x+qq+8ElE6ST8Y
 pm6rMzw0AZ5buPK8QdGVDk0dD4WKObj1LzmRZvBtYeWynO6sxyKUl6B2CgAxrvn5
 D1Li2/arkJMCVeIuIL5uE6DPoxSh8J7OuEC4KeWX8M8xQSEDImqfZ+tDL2Esv6jv
 xDmymq584hiCBc1CJjCOA9kZYe6KNXC7lkVOns6GaKKzLhkrcvUR3dUGhMyzxAMO
 t9QIAinR6JwRRA==
 =EBbc
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14 10:43:38 -08:00