IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
During the handoff from earlycon to the real console driver, we have
two separate drivers operating on the same device concurrently. In the
case of the 8250 driver these concurrent accesses cause problems due
to the driver's use of banked registers, controlled by LCR.DLAB. It is
possible for the setup(), config_port(), pm() and set_mctrl() callbacks
to set DLAB, which can cause the earlycon code that intends to access
TX to instead access DLL, leading to missed output and corruption on
the serial line due to unintended modifications to the baud rate.
In particular, for setup() we have:
univ8250_console_setup()
-> serial8250_console_setup()
-> uart_set_options()
-> serial8250_set_termios()
-> serial8250_do_set_termios()
-> serial8250_do_set_divisor()
For config_port() we have:
serial8250_config_port()
-> autoconfig()
For pm() we have:
serial8250_pm()
-> serial8250_do_pm()
-> serial8250_set_sleep()
For set_mctrl() we have (for some devices):
serial8250_set_mctrl()
-> omap8250_set_mctrl()
-> __omap8250_set_mctrl()
To avoid such problems, let's make it so that the console is locked
during pre-registration calls to these callbacks, which will prevent
the earlycon driver from running concurrently.
Remove the partial solution to this problem in the 8250 driver
that locked the console only during autoconfig_irq(), as this would
result in a deadlock with the new approach. The console continues
to be locked during autoconfig_irq() because it can only be called
through uart_configure_port().
Although this patch introduces more locking than strictly necessary
(and in particular it also locks during the call to rs485_config()
which is not affected by this issue as far as I can tell), it follows
the principle that it is the responsibility of the generic console
code to manage the earlycon handoff by ensuring that earlycon and real
console driver code cannot run concurrently, and not the individual
drivers.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://linux-review.googlesource.com/id/I7cf8124dcebf8618e6b2ee543fa5b25532de55d8
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240304214350.501253-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20240304123035.758700-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240304123035.758700-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240304123035.758700-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240304123035.758700-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240304123035.758700-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several serial drivers want to read the same or similar set of
the port properties. Make a common helper for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some APIs we would like to assign the special value to iotype
and compare against it in another places. Introduce UPIO_UNKNOWN
for this purpose.
Note, we can't use 0, because it's a valid value for IO port access.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently it's not crystal clear what UPIO_* and UPQ_* definitions
belong to. Reindent the code, so it will be easy to read and understand.
No functional changes intended.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304123035.758700-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike the 8250 serial driver complex, the sh-sci driver uses only a
single pair of functions to read and write serial port registers.
Hence there is no need to incur the overhead of calling them through
indirection, like the serial_port_{in,out}() wrappers do.
Replace all calls to these wrappers by direct calls to
sci_serial_{in,out}().
Remove the setup of the uart_port.serial_{in,out}() callbacks. After
removal of all calls to serial_port_{in,out}() in the sh-sci driver, the
only remaining user is uart_xchar_out(), which the sh-sci driver does
not use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/51e79d601cb9d9d63822d3773d3cf05a96868612.1709548811.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the circular buffer is empty, it just means we fit all characters to
send into the HW fifo, but not that the hardware finished transmitting
them.
So if we immediately call stop_tx() after that, this may abort any
pending characters in the HW fifo, and cause dropped characters on the
console.
Fix this by only stopping tx when the tx HW fifo is actually empty.
Fixes: 8275b48b2780 ("tty: serial: introduce transmit helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20240303150807.68117-1-jonas.gorski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-19-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct eg20t_port has a spinlock_t which is used for locking while
access I/O of the device. Then there is the uart_portlock which is
sometimes and nests within eg20t_port's lock.
The uart_port lock is not used while using the struct in
pch_uart_hal_read() which might be okay. Then both locks are used in
pch_console_write() which looks odd especially the double try_lock part.
All in all it looks like the uart_port's lock could replace eg20t_port's
lock and simplify the code.
Remove eg20t_port::lock and use uart_port's lock for the lock scope.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-18-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to directly initialize the spinlock_t in struct
uart_port. The structure is later passed to uart_add_one_port() which
initialize the complete struct including the lock member.
Remove spin_lock_init() on uart_port's internal lock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-17-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt service routine is always invoked with disabled
interrupts.
Remove the _irqsave() from the locking functions in the interrupts
service routine/ pch_uart_interrupt().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-16-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
handle_rx() is only a wrapper around handle_rx_to() without any
additional functionality.
Invoke handle_rx_to() directly and remove handle_rx().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-14-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Handle sysrq requests sysrq once the port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-13-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Handle sysrq requests sysrq once the port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-unisoc@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-12-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Handle sysrq requests sysrq once the port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Andreas Färber <afaerber@suse.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-actions@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-11-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Handle sysrq requests sysrq once the port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-10-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Hammer Hsieh <hammerh0314@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-9-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-8-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-7-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-5-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-4-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-3-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port lock is a spinlock_t which is becomes a sleeping lock on PREEMPT_RT.
The driver splits the locking function into two parts: local_irq_save() and
uart_port_lock() and this breaks PREEMPT_RT.
Delay handling sysrq until port lock is dropped.
Remove the special case in the console write routine an always use the
complete locking function.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240301215246.891055-2-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of silently giving up, at least tell what the problem is.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240222111922.2016122-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'clocks' property is required regarding the device. Convert st,asc
binding to DT schema format in order to add this property, and update
example.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240226152135.8671-1-rgallaispou@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The serial8250_update_uartclk() body was created based on the several
method calls copied from the serial8250_do_set_termios() function. Seeing
aside with some other things the later method can update the baud rate
based on the new reference clock let's just call it instead thus
simplifying the code a bit.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/linux-serial/ZczD7KPbeRnY4CFc@black.fi.intel.com
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240222145058.28307-1-fancer.lancer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 1f2bcb8c8ccd ("gpio: protect the descriptor label with
SRCU") gpiod_set_consumer_name() calls synchronize_srcu() which led to
a "sleeping in atomic context" smatch warning.
This function (along with gpiod_get/put() and all other GPIO APIs apart
from gpiod_get/set_value() and gpiod_direction_input/output()) should
have never been called with a spinlock taken. We're only fixing this now
as GPIOLIB has been rebuilt to use SRCU for access serialization which
uncovered this problem.
Move the calls to gpiod_get/put() outside the spinlock critical section.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/deee1438-efc1-47c4-8d80-0ab2cf01d60a@moroto.mountain/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240220113410.16613-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently for platforms which passes UART fifosize from DT gets
override by local driver structure "s3c24xx_serial_drv_data",
which is not intended. Change the code to honor fifosize from
device tree at first.
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Link: https://lore.kernel.org/r/20240220101227.80741-1-m.shams@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling a kernel for the ColdFire causes a compiler warning:
drivers/tty/serial/mcf.c:473:12: warning: no previous prototype for
‘early_mcf_setup’ [-Wmissing-prototypes]
473 | int __init early_mcf_setup(struct mcf_platform_uart *platp)
| ^~~~~~~~~~~~~~~
This function seems to be completely unused, so let's remove it
to silence the warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240219164002.520342-1-thuth@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are not supposed to spread quirks in 8250_port module especially
when we have a separate driver for the hardware in question.
Move quirk from generic module to the driver that uses it.
While at it, move IO to ->set_divisor() callback as it has to be from
day 1. ->get_divisor() is not supposed to perform any IO as UART port:
- might not be powered on
- is not locked by a spin lock
Fixes: 1ed67ecd1349 ("8250: microchip: Add 4 Mbps support in PCI1XXXX UART")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20240219162917.2159736-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8250 PCI library provides a common code to map and assign resources.
Use it in order to deduplicate existing code and support IO port
variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SIMPLE_DEV_PM_OPS() is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS()
and use pm_sleep_ptr() for setting the driver's PM routines. We can now
remove the __maybe_unused qualifier in the suspend and resume functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While now there is no issue if IRQ is fired before we clearing
the interrupts as the handler does the same, but strictly speaking
it might be problematic if IRQ handler wants to do something more.
Move clearing interrupt code to be called before registering the
IRQ handler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM callbacks take struct device pointer as a parameter, use
dev_get_drvdata() to retrieve it instead of unneeded double
loop of referencing via pci_get_drvdata(to_pci_dev(dev)).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems a copy&paste mistake that suspend callback removes the GPIO
device. There is no counterpart of this action, means once suspended
there is no more GPIO device available untile full unbind-bind cycle
is performed. Remove suspicious GPIO device removal in suspend.
Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240219150627.2101198-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
