IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Document the new compatibles used on IBM system1-bmc
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125212154.4028640-2-ninad@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Enable FSI interrupt controllers for AST2600 and P10BMC hub master.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215220759.976998-27-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the SGPIO line name that the project's function can use by the
meaningful name.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-12-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the GPIO line name that the project's function can use by the
meaningful name.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-11-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add led-fan-fault gpio pin on the PCA9555 on the i2c bus 0.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-10-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add fan rpm controller max31790 on all bus of FCB.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-9-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add bus labels and aliases for the fan control board.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-8-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Correct the address from 0x51 to 0x54 of eeprom on the i2c bus 1
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-7-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add one temperature sensor on i2c bus 1
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-6-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Enable power monitor device ina230 and ltc2945 on the i2c bus 0
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-5-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Correct the sgpio use from sgpiom1 to sgpiom0
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-4-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove the unuse setting and fix the link to 100 M
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-3-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The project Minerva which is the platform used by Meta has two boards: the
Chassis Management Module (Minerva) and the Motherboard (Harma), so change
the DTS name to minerva here for CMM use.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-2-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add linux device tree entry related to
the Meta(Facebook) computer-node system use an AT2600 BMC.
This node is named "Harma".
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231211162656.2564267-3-peteryin.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Document the new compatibles used on Meta Harma.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20231211162656.2564267-2-peteryin.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series
micro-ATX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as serial console, KVM support
and POST code snooping.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231202003908.3635695-3-renze@rnplus.nl
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Document Asrock X570D4U compatible.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231202003908.3635695-2-renze@rnplus.nl
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
This is a Xeon board broadly similar (aside from CPU vendor) to the
already-support romed8hm3 (half-width, single-socket, ast2500). It
doesn't require anything terribly special for OpenBMC support, so this
device-tree should provide everything necessary for basic
functionality with it.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20231120121954.19926-6-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZgCRgwAKCRAwbglWLn0t
XHozAP9jLdeGs1ReYZAn+W0QtW/SJHJznoPiHcktdNKG4rNX3QD9G3URu0f4jKCG
yvjw8qHM1pC2cihXXjABjf7gL7g6LAE=
=cNP7
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration to
prevent triggering the related WARN_ONs() in the APIC and topology code.
- Handle the case where no APIC is found gracefully by registering a fake
APIC in the topology code. That makes all related topology functions
work correctly and does not affect the actual APIC driver code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs are
not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
-----BEGIN PGP SIGNATURE-----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=WyQ2
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set time
slice.
-----BEGIN PGP SIGNATURE-----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=K76J
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set
time slice"
* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and they
should be solid now.
-----BEGIN PGP SIGNATURE-----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=Xaob
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and
they should be solid now"
* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
swiotlb: Fix alignment checks when both allocation and DMA masks are present
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
swiotlb: Enforce page alignment in swiotlb_alloc()
swiotlb: Fix double-allocation of slots due to broken alignment handling
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware.
Fixes: bad267f9e18f ("efi: verify that variable services are supported")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.
So make the memset() conditional on whether the EFI stub is running in
native mode.
Fixes: b3810c5a2cc4a666 ("x86/efistub: Clear decompressor BSS in native EFI entrypoint")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Cc: <stable@kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.
While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.
Fixes: 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging global variables")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/2ca419f4d0de719926fd82353f6751f717590a86.1711122067.git.thomas.lendacky@amd.com
When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.
Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.
Fixes: 533568e06b15 ("x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/8f20345cda7dbba2cf748b286e1bc00816fe649a.1711122067.git.thomas.lendacky@amd.com
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477ae8 ("x86/fpu: Update XFD state where required")
Signed-off-by: Adamos Ttofari <attofari@amazon.de>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com
Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
The memory bandwidth software controller uses 2^20 units rather than
10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M"
Linux define for 0x00100000.
Update the documentation to use MiB when describing this feature.
It's too late to fix the mount option "mba_MBps" as that is now an
established user interface.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240322182016.196544-1-tony.luck@intel.com
1) Prevent endless timer requeuing which is caused by two CPUs racing out
of idle. This happens when the last CPU goes idle and therefore has to
ensure to expire the pending global timers and some other CPU come out
of idle at the same time and the other CPU wins the race and expires
the global queue. This causes the last CPU to chase ghost timers
forever and reprogramming it's clockevent device endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
2) The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent which
in turn causes the timer to be not programmed and not being expired on
time.
Restore the idle tracking for the global timer base so that the self
IPI condition for NOHZ full is working correctly again.
-----BEGIN PGP SIGNATURE-----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=lY5O
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two regression fixes for the timer and timer migration code:
- Prevent endless timer requeuing which is caused by two CPUs racing
out of idle. This happens when the last CPU goes idle and therefore
has to ensure to expire the pending global timers and some other
CPU come out of idle at the same time and the other CPU wins the
race and expires the global queue. This causes the last CPU to
chase ghost timers forever and reprogramming it's clockevent device
endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
- The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent
which in turn causes the timer to be not programmed and not being
expired on time.
Restore the idle tracking for the global timer base so that the
self IPI condition for NOHZ full is working correctly again"
* tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix removed self-IPI on global timer's enqueue in nohz_full
timers/migration: Fix endless timer requeue after idle interrupts
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide. This
restricted obviously the possible range of the prescaler adjustments.
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized.
- A set of device tree updates to support new system on chips in various
drivers.
- Kernel-doc and other cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=M9Gu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the trigger
type is changed
- Clear the interrupt status register when setting up edge type trigger
modes.
- Ensure that the trigger type and routing information is set before the
interrupt is enabled.
-----BEGIN PGP SIGNATURE-----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=zIKG
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of fixes for the Renesas RZG21 interrupt chip driver to
prevent spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the
trigger type is changed
- Clear the interrupt status register when setting up edge type
trigger modes
- Ensure that the trigger type and routing information is set before
the interrupt is enabled"
* tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time
irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type
irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
THe trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number is
re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change does
not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number after
the tracepoint.
-----BEGIN PGP SIGNATURE-----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=iW0L
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Thomas Gleixner:
"A single fix for the generic entry code:
The trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number
is re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change
does not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number
after the tracepoint"
* tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Respect changes to system call number by trace_sys_enter()
- Handle errors in mark_rodata_ro() and mark_initmem_nx().
- Make struct crash_mem available without CONFIG_CRASH_DUMP.
Thanks to: Christophe Leroy, Hari Bathini.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmX+HgQTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEGiEACC18EO6YUDVCblbRQsJLgZUZWdskqF
0TTgrqhemXS1m7yucqp4HwM5N9YV7d3nXtaBTd0nxwrHRCpIef3XDFUyiLpFWbDQ
pPt9AyUhTkkdH/6JQlYTC9S0/l9xAYPo15As8ZUnTPUNJk2pV6NxSpjYqZuQcmFm
W5ln2rYDtG57XDI0WMMo/CSZ50YRgWSpINavQLUxn6MxTda2ZrXF39HaKi0FS1u+
64bTT3uwKHvVWcf4/+KTiY3EOUgbgNeedZ7PjVGOx6VpQvig96/qtbu8zCfqMX0v
eTz+p6IDtLTeXSu8Ak5YN5wBBNA9EsnR0osk/T99Ru48EEErkTl4+G6bkXlgRu7A
KRbbyI66JZHXauwaKIwuhOswoYtEDrCrOadYMlYGCqjUsDs9zmxTUWamcZBSow60
5S/Oo5SgOES+5P/p889hwW8XodC9uzLltMw7M+R36nRDPh9nbwu93Y1Kx2LQiery
sxnXu+Pg7DTLq4zH75WggwpOH6nPoAP0NYT3QXnbgz8CFArePE7h1OfMzy26Xj1X
C7wh1npAksdPo/00t2VEO7V38vq8nm41JqQ5lbPsRtoUuwFVqMp7+Agmq+eK4J/B
zVEroBLIlGYexV5OLu824wIAVhT/PrYm9ONaTi7O7DFZrOFsnNyrRw1fifr7afgu
xECv0qJ+5I9uAw==
=edty
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
-----BEGIN PGP SIGNATURE-----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=f4r2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
