IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 118642d7f606fc9b9c92ee611275420320290ffb upstream.
The swapaccount deprecation warning is throwing false positives. Since we
deprecated the knob and defaulted to enabling, the only reports we've been
getting are from folks that set swapaccount=1. While this is a nice
affirmation that always-enabling was the right choice, we certainly don't
want to warn when users request the supported mode.
Only warn when disabling is requested, and clarify the warning.
[colin.i.king@gmail.com: spelling: "commdandline" -> "commandline"]
Link: https://lkml.kernel.org/r/20240215090544.1649201-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/20240213081634.3652326-1-hannes@cmpxchg.org
Fixes: b25806dcd3d5 ("mm: memcontrol: deprecate swapaccounting=0 mode")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reported-by: "Jonas Schäfer" <jonas@wielicki.name>
Reported-by: Narcis Garcia <debianlists@actiu.net>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13d0599ab3b2ff17f798353f24bcbef1659d3cfc upstream.
For online parameters change, DAMON_LRU_SORT creates new schemes based on
latest values of the parameters and replaces the old schemes with the new
one. When creating it, the internal status of the quotas of the old
schemes is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-3-sj@kernel.org
Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13ddaf26be324a7f951891ecd9ccd04466d27458 upstream.
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem. Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1
---- ----
do_swap_page() do_swap_page() with same entry
<direct swapin path> <direct swapin path>
<alloc page A> <alloc page B>
swap_read_folio() <- read to page A swap_read_folio() <- read to page B
<slow on later locks or interrupt> <finished swapin first>
... set_pte_at()
swap_free() <- entry is free
<write to page B, now page A stalled>
<swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
unchanged, but page A
is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache. Release the pin after
PT unlocked.
Racers just loop and wait since it's a rare and very short event. A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics. A similar livelock issue was described in commit
029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
Polulating 32MB of memory region...
Keep swapping out...
Starting round 0...
Spawning 65536 workers...
32746 workers spawned, wait for done...
Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region
using a small swap device. Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:
Before: 10934698 us
After: 11157121 us
Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4]
Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com
Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7efa6f2c803366f84c3c362f01e822490669d72b upstream.
If HUGETLBFS is not enabled then the default_huge_page_size function will
return 0 and cause a divide by 0 error. Add a check to see if the huge page
size is 0 and skip the hugetlb tests if it is.
Link: https://lkml.kernel.org/r/20240205145055.3545806-2-terry.tritton@linaro.org
Fixes: 16a45b57cbf2 ("selftests/mm: add framework for uffd-unit-test")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5fc07a5fb56216a49e6c1d0b172d5464d99a89b upstream.
Commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full
page") removed the logic which checks whether a VPD page is present on
the supported pages list before asking for the page itself. That was
done because SPC helpfully states "The Supported VPD Pages VPD page
list may or may not include all the VPD pages that are able to be
returned by the device server". Testing had revealed a few devices
that supported some of the 0xBn pages but didn't actually list them in
page 0.
Julian Sikorski bisected a problem with his drive resetting during
discovery to the commit above. As it turns out, this particular drive
firmware will crash if we attempt to fetch page 0xB9.
Various approaches were attempted to work around this. In the end,
reinstating the logic that consults VPD page 0 before fetching any
other page was the path of least resistance. A firmware update for the
devices which originally compelled us to remove the check has since
been released.
Link: https://lore.kernel.org/r/20240214221411.2888112-1-martin.petersen@oracle.com
Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page")
Cc: stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Reviewed-by: Lee Duncan <lee.duncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de959094eb2197636f7c803af0943cb9d3b35804 upstream.
As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc
wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit()
and kfree(). That is not done properly for the error case, hitting WARN and
NULL pointer dereference in bio_free().
Fixes: 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://lore.kernel.org/r/20240214144356.101814-1-naohiro.aota@wdc.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 321da3dc1f3c92a12e3c5da934090d2992a8814c upstream.
It has been observed that some USB/UAS devices return generic properties
hardcoded in firmware for mode pages for a period of time after a device
has been discovered. The reported properties are either garbage or they do
not accurately reflect the characteristics of the physical storage device
attached in the case of a bridge.
Prior to commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") we would call revalidate several
times during device discovery. As a result, incorrect values would
eventually get replaced with ones accurately describing the attached
storage. When we did away with the redundant revalidate pass, several
cases were reported where devices reported nonsensical values or would
end up in write-protected state.
An initial attempt at addressing this issue involved introducing a
delayed second revalidate invocation. However, this approach still
left some devices reporting incorrect characteristics.
Tasos Sahanidis debugged the problem further and identified that
introducing a READ operation prior to MODE SENSE fixed the problem and that
it wasn't a timing issue. Issuing a READ appears to cause the devices to
update their state to reflect the actual properties of the storage
media. Device properties like vendor, model, and storage capacity appear to
be correctly reported from the get-go. It is unclear why these devices
defer populating the remaining characteristics.
Match the behavior of a well known commercial operating system and
trigger a READ operation prior to querying device characteristics to
force the device to populate the mode pages.
The additional READ is triggered by a flag set in the USB storage and
UAS drivers. We avoid issuing the READ for other transport classes
since some storage devices identify Linux through our particular
discovery command sequence.
Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com
Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable@vger.kernel.org
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cab687205986491302cd2e440ef1d253031c221 upstream.
The Linux CXL subsystem is built on the assumption that HPA == SPA.
That is, the host physical address (HPA) the HDM decoder registers are
programmed with are system physical addresses (SPA).
During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1,
8.1.3.8) are checked if the memory is enabled and the CXL range is in
a HPA window that is described in a CFMWS structure of the CXL host
bridge (cxl-3.1, 9.18.1.3).
Now, if the HPA is not an SPA, the CXL range does not match a CFMWS
window and the CXL memory range will be disabled then. The HDM decoder
stops working which causes system memory being disabled and further a
system hang during HDM decoder initialization, typically when a CXL
enabled kernel boots.
Prevent a system hang and do not disable the HDM decoder if the
decoder's CXL range is not found in a CFMWS window.
Note the change only fixes a hardware hang, but does not implement
HPA/SPA translation. Support for this can be added in a follow on
patch series.
Signed-off-by: Robert Richter <rrichter@amd.com>
Fixes: 34e37b4c432c ("cxl/port: Enable HDM Capability after validating DVSEC Ranges")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240216160113.407141-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c6224bfabbf7f3e491c51ab50fd2c6f92ba1141 upstream.
The expectation is that cxl_parse_cfwms() continues in the face the of
failure as evidenced by code like:
cxlrd = cxl_root_decoder_alloc(root_port, ways, cxl_calc_hb);
if (IS_ERR(cxlrd))
return 0;
There are other error paths in that function which mistakenly follow
idiomatic expectations and return an error when they should not. Most of
those mistakes are innocuous checks that hardly ever fail in practice.
However, a recent change succeed in making the implementation more
fragile by applying an idiomatic, but still wrong "fix" [1]. In this
failure case the kernel reports:
cxl root0: Failed to populate active decoder targets
cxl_acpi ACPI0017:00: Failed to add decode range: [mem 0x00000000-0x7fffffff flags 0x200]
...which is a real issue with that one window (to be fixed separately),
but ends up failing the entirety of cxl_acpi_probe().
Undo that recent breakage while also removing the confusion about
ignoring errors. Update all exits paths to return an error per typical
expectations and let an outer wrapper function handle dropping the
error.
Fixes: 91019b5bc7c2 ("cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()") [1]
Cc: <stable@vger.kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9177f3c0dea6143d05cac1bbd28668fd0e216d11 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-verity reports an error [1].
This commit fixes dm-verity, so that if hash verification fails, the data
is read again into a kernel buffer (where userspace can't modify it) and
the hash is rechecked. If the recheck succeeds, the content of the kernel
buffer is copied into the user buffer; if the recheck fails, an error is
reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50c70240097ce41fe6bce6478b80478281e4d0f7 upstream.
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
[1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c88f5e553fe38b2ffc4c33d08654e5281b297677 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-integrity reports an error [1]. The error is reported in a log
and it may cause RAID leg being kicked out of the array.
This commit fixes dm-integrity, so that if integrity verification fails,
the data is read again into a kernel buffer (where userspace can't modify
it) and the integrity tag is rechecked. If the recheck succeeds, the
content of the kernel buffer is copied into the user buffer; if the
recheck fails, an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82b143aeb169b8b55798d7d2063032e1a6ceeeb0 upstream.
This reverts commit 0921244f6f4f0d05698b953fe632a99b38907226.
It broke CPU hotplugging because it modifies the __cpu_possible_mask
after bootup, so that it will be different than nr_cpu_ids, which
then effictively breaks the workqueue setup code and triggers crashes
when shutting down CPUs at runtime.
Guenter was the first who noticed the wrong values in __cpu_possible_mask,
since the cpumask Kunit tests were failig.
Reverting this commit fixes both issues, but sadly brings back this
uncritical runtime warning:
register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.org/lkml/2024/2/4/146
Link: https://lore.kernel.org/lkml/Zb0mbHlIud_bqftx@slm.duckdns.org/t/
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42e15d12070b4ff9af2b980f1b65774c2dab0507 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-crypt reports an authentication error [1]. The error is
reported in a log and it may cause RAID leg being kicked out of the
array.
This commit fixes dm-crypt, so that if integrity verification fails, the
data is read again into a kernel buffer (where userspace can't modify it)
and the integrity tag is rechecked. If the recheck succeeds, the content
of the kernel buffer is copied into the user buffer; if the recheck fails,
an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1eb1e984379e2da04361763f66eec90dd75cf63e upstream.
Trying to run the iov_iter unit test on a nommu system such as the qemu
kc705-nommu emulation results in a crash.
KTAP version 1
# Subtest: iov_iter
# module: kunit_iov_iter
1..9
BUG: failure at mm/nommu.c:318/vmap()!
Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu
systems, causing the crash. TEST_IOV_ITER therefore needs to depend on
MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net
Fixes: 2d71340ff1d4 ("iov_iter: Kunit tests for copying to/from an iterator")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream.
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
kiocb_set_cancel_fn+0x9c/0xa8
ffs_epfile_read_iter+0x144/0x1d0
io_read+0x19c/0x498
io_issue_sqe+0x118/0x27c
io_submit_sqes+0x25c/0x5fc
__arm64_sys_io_uring_enter+0x104/0xab0
invoke_syscall+0x58/0x11c
el0_svc_common+0xb4/0xf4
do_el0_svc+0x2c/0xb0
el0_svc+0x2c/0xa4
el0t_64_sync_handler+0x68/0xb4
el0t_64_sync+0x1a4/0x1a8
Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b085736e44dbbe69b5eea1a8a294f404678a1f4 upstream.
In ata ata_dev_power_set_standby(), check that the target device is not
sleeping. If it is, there is no need to do anything.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef1dc40ffa6a6cb968b0fdc43c3a61727a9e950 upstream.
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22e1dc4b2fec17af70f297a4295c5f19a0f3fbeb upstream.
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd915ae73a2d78559b376ad2caf5e4ef51de2455 upstream.
Stop calling drm_bridge_remove() for bridges allocated/managed by other
drivers in the remove paths of meson_encoder_{cvbs,dsi,hdmi}.
drm_bridge_remove() unregisters the bridge so it cannot be used
anymore. Doing so for bridges we don't own can lead to the video
pipeline not being able to come up after -EPROBE_DEFER of the VPU
because we're unregistering a bridge that's managed by another driver.
The other driver doesn't know that we have unregistered it's bridge
and on subsequent .probe() we're not able to find those bridges anymore
(since nobody re-creates them).
This fixes probe errors on Meson8b boards with the CVBS outputs enabled.
Fixes: 09847723c12f ("drm/meson: remove drm bridges at aggregate driver unbind time")
Fixes: 42dcf15f901c ("drm/meson: add DSI encoder")
Cc: <stable@vger.kernel.org>
Reported-by: Steve Morvai <stevemorvai@hotmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Steve Morvai <stevemorvai@hotmail.com>
Link: https://lore.kernel.org/r/20240215220442.1343152-1-martin.blumenstingl@googlemail.com
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215220442.1343152-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40510a941d27d405a82dc3320823d875f94625df upstream.
If caching mode change fails due to, for example, OOM we
free the allocated pages in a two-step process. First the pages
for which the caching change has already succeeded. Secondly
the pages for which a caching change did not succeed.
However the second step was incorrectly freeing the pages already
freed in the first step.
Fix.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 379989e7cbdc ("drm/ttm/pool: Fix ttm_pool_alloc error path")
Cc: Christian König <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221073324.3303-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e42b9d8b9ea2672811285e6a7654887ff64d23f3 upstream.
[BUG]
With the following file extent layout, defrag would do unnecessary IO
and result more on-disk space usage.
# mkfs.btrfs -f $dev
# mount $dev $mnt
# xfs_io -f -c "pwrite 0 40m" $mnt/foobar
# sync
# xfs_io -f -c "pwrite 40m 16k" $mnt/foobar
# sync
Above command would lead to the following file extent layout:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 41943040 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Which is mostly fine. We can allow the final 16K to be merged with the
previous 40M, but it's upon the end users' preference.
But if we defrag the file using the default parameters, it would result
worse file layout:
# btrfs filesystem defrag $mnt/foobar
# sync
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 8650752 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 340787200 nr 33292288
extent data offset 0 nr 33292288 ram 33292288
extent compression 0 (none)
item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Note the original 40M extent is still there, but a new 32M extent is
created for no benefit at all.
[CAUSE]
There is an existing check to make sure we won't defrag a large enough
extent (the threshold is by default 32M).
But the check is using the length to the end of the extent:
range_len = em->len - (cur - em->start);
/* Skip too large extent */
if (range_len >= extent_thresh)
goto next;
This means, for the first 8MiB of the extent, the range_len is always
smaller than the default threshold, and would not be defragged.
But after the first 8MiB, the remaining part would fit the requirement,
and be defragged.
Such different behavior inside the same extent caused the above problem,
and we should avoid different defrag decision inside the same extent.
[FIX]
Instead of using @range_len, just use @em->len, so that we have a
consistent decision among the same file extent.
Now with this fix, we won't touch the extent, thus not making it any
worse.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fa304b9f8ec440e614af6d35826110c633c4074 upstream.
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0df8669f69a8638f04c6a3d1f3b7056c2c18f62c upstream.
The addition of the XFS online fsck documentation starting with
commit a8f6c2e54ddc ("xfs: document the motivation for online fsck design")
added a deeper level of nesting than LaTeX is prepared to deal with. That
caused a pdfdocs build failure with the helpful "Too deeply nested" error
message buried deeply in Documentation/output/filesystems.log.
Increase the "maxlistdepth" parameter to instruct LaTeX that it needs to
deal with the deeper nesting whether it wants to or not.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Cc: stable@vger.kernel.org # v6.4+
Link: https://lore.kernel.org/linux-doc/67f6ac60-7957-4b92-9d72-a08fbad0e028@gmail.com/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baf8361e54550a48a7087b603313ad013cc13386 upstream.
MDS mitigation requires clearing the CPU buffers before returning to
user. This needs to be done late in the exit-to-user path. Current
location of VERW leaves a possibility of kernel data ending up in CPU
buffers for memory accesses done after VERW such as:
1. Kernel data accessed by an NMI between VERW and return-to-user can
remain in CPU buffers since NMI returning to kernel does not
execute VERW to clear CPU buffers.
2. Alyssa reported that after VERW is executed,
CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system
call. Memory accesses during stack scrubbing can move kernel stack
contents into CPU buffers.
3. When caller saved registers are restored after a return from
function executing VERW, the kernel stack accesses can remain in
CPU buffers(since they occur after VERW).
To fix this VERW needs to be moved very late in exit-to-user path.
In preparation for moving VERW to entry/exit asm code, create macros
that can be used in asm. Also make VERW patching depend on a new feature
flag X86_FEATURE_CLEAR_CPU_BUF.
Reported-by: Alyssa Milburn <alyssa.milburn@intel.com>
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fa765c4b4aed2d64266b694520ecb025c862c5a9 ]
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
CPU0 CPU1
shutdown_pirq {
xen_evtchn_close(e)
__startup_pirq {
EVTCHNOP_bind_pirq
-> returns just freed evtchn e
set_evtchn_to_irq(e, irq)
}
xen_irq_info_cleanup() {
set_evtchn_to_irq(e, -1)
}
}
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
------------[ cut here ]------------
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
kernel BUG at drivers/xen/events/events_base.c:499!
invalid opcode: 0000 [#1] SMP PTI
CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1
Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006
Workqueue: nvme-reset-wq nvme_reset_work
RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0
Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00
RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff
RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? show_trace_log_lvl+0x1c1/0x2d9
? show_trace_log_lvl+0x1c1/0x2d9
? set_affinity_irq+0xdc/0x1c0
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0x90/0x110
? bind_evtchn_to_cpu+0xdf/0xf0
? do_error_trap+0x65/0x80
? bind_evtchn_to_cpu+0xdf/0xf0
? exc_invalid_op+0x4e/0x70
? bind_evtchn_to_cpu+0xdf/0xf0
? asm_exc_invalid_op+0x12/0x20
? bind_evtchn_to_cpu+0xdf/0xf0
? bind_evtchn_to_cpu+0xc5/0xf0
set_affinity_irq+0xdc/0x1c0
irq_do_set_affinity+0x1d7/0x1f0
irq_setup_affinity+0xd6/0x1a0
irq_startup+0x8a/0xf0
__setup_irq+0x639/0x6d0
? nvme_suspend+0x150/0x150
request_threaded_irq+0x10c/0x180
? nvme_suspend+0x150/0x150
pci_request_irq+0xa8/0xf0
? __blk_mq_free_request+0x74/0xa0
queue_request_irq+0x6f/0x80
nvme_create_queue+0x1af/0x200
nvme_create_io_queues+0xbd/0xf0
nvme_setup_io_queues+0x246/0x320
? nvme_irq_check+0x30/0x30
nvme_reset_work+0x1c8/0x400
process_one_work+0x1b0/0x350
worker_thread+0x49/0x310
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Modules linked in:
---[ end trace a11715de1eee1873 ]---
Fixes: d46a78b05c0e ("xen: implement pirq type event channels")
Cc: stable@vger.kernel.org
Co-debugged-by: Andrew Panyakin <apanyaki@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240124163130.31324-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fcdaf3d7634338c3f5cbfa7451eb0b6b0024844 ]
Modify the internal bind- and unbind-interfaces to take a struct
irq_info parameter. When allocating a new IRQ pass the pointer from
the allocating function further up.
This will reduce the number of info_for_irq() calls and make the code
more efficient.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: fa765c4b4aed ("xen/events: close evtchn after mapping cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dd9ad32d7758b1a76742f394acf0eb3ac8a636a ]
Instead of having a common function for allocating a single IRQ or a
consecutive number of IRQs, split up the functionality into the callers
of xen_allocate_irqs_dynamic().
This allows to handle any allocation error in xen_irq_init() gracefully
instead of panicing the system. Let xen_irq_init() return the irq_info
pointer or NULL in case of an allocation error.
Additionally set the IRQ into irq_info already at allocation time, as
otherwise the IRQ would be '0' (which is a valid IRQ number) until
being set.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: fa765c4b4aed ("xen/events: close evtchn after mapping cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bdb0ac350fe5e6301562143e4573971dd01ae0b ]
The helper functions type_from_irq() and cpu_from_irq() are just one
line functions used only internally.
Open code them where needed. At the same time modify and rename
get_evtchn_to_irq() to return a struct irq_info instead of the IRQ
number.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: fa765c4b4aed ("xen/events: close evtchn after mapping cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 686464514fbebb6c8de4415238319e414c3500a4 ]
get_evtchn_to_irq() has only one external user while irq_from_evtchn()
provides the same functionality and is exported for a wider user base.
Modify the only external user of get_evtchn_to_irq() to use
irq_from_evtchn() instead and make get_evtchn_to_irq() static.
evtchn_from_irq() and irq_from_virq() have a single external user and
can easily be combined to a new helper irq_evtchn_from_virq() allowing
to drop irq_from_virq() and to make evtchn_from_irq() static.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: fa765c4b4aed ("xen/events: close evtchn after mapping cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e90e58c11b74c2bddac4b2702cf79d36b981278 ]
Currently the handling of events is supported either in the kernel or
userspace, but not both.
In order to support fast delivery of interrupts from the guest to the
backend, we need to handle the Queue notify part of Virtio protocol in
kernel and the rest in userspace.
Update the interrupt handler registration flag to IRQF_SHARED for event
channels, which would allow multiple entities to bind their interrupt
handler for the same event channel port.
Also increment the reference count of irq_info when multiple entities
try to bind event channel to irqchip, so the unbinding happens only
after all the users are gone.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/99b1edfd3147c6b5d22a5139dab5861e767dc34a.1697439990.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: fa765c4b4aed ("xen/events: close evtchn after mapping cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f3bce13266e6fe2f7a46f94d8bc94d5274e276b ]
[WHY]
When usb4 bandwidth allocation mode is enabled, driver need to request
bandwidth from connection manager. For mst link, the requested
bandwidth should be big enough for all remote streams.
[HOW]
- If mst link, the requested bandwidth should be the sum of all mst
streams bandwidth added with dp MTPH overhead.
- Allocate/deallcate usb4 bandwidth when setting dpms on/off.
- When doing display mode validation, driver also need to consider total
bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 0484e05d048b ("drm/amd/display: fixed integer types and null check locations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f1622a5f05d948a7c665a458a3dd76ba73015e ]
[Why]
If bandwidth allocation feature is enabled, connection manager wont
limit the dp tunnel bandwidth. So, need to do display mode validation
for streams on dpia links to avoid oversubscription of dp tunnel
bandwidth.
[How]
- To read non reduced link rate and lane count and update
reported link capability.
- To calculate the bandwidth required for streams of dpia links
per host router and validate against the allocated bandwidth for
the host router.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 0484e05d048b ("drm/amd/display: fixed integer types and null check locations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a0fa47e816e186f6b4c0055d07eeec42d11871 ]
Most MPTCP-level related fields are under the mptcp data lock
protection, but are written one-off without such lock at MPC
complete time, both for the client and the server
Leverage the mptcp_propagate_state() infrastructure to move such
initialization under the proper lock client-wise.
The server side critical init steps are done by
mptcp_subflow_fully_established(): ensure the caller properly held the
relevant lock, and avoid acquiring the same lock in the nested scopes.
There are no real potential races, as write access to such fields
is implicitly serialized by the MPTCP state machine; the primary
goal is consistency.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f83d8a77eeeb47011b990fd766a421ee64f1d73 ]
The 'msk->write_seq' and 'msk->snd_nxt' are always updated under
the msk socket lock, except at MPC handshake completiont time.
Builds-up on the previous commit to move such init under the relevant
lock.
There are no known problems caused by the potential race, the
primary goal is consistency.
Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c693a8516429908da3ea111b0caa3c042ab1e6e9 ]
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp
with the new helper mptcp_set_state().
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9cd27b8cd191133e287e5de107f971136abe8a2 ]
Add a new MIB counter named MPTCP_MIB_CURRESTAB to count current
established MPTCP connections, similar to TCP_MIB_CURRESTAB. This is
useful to quickly list the number of MPTCP connections without having to
iterate over all of them.
This patch adds a new helper function mptcp_set_state(): if the state
switches from or to ESTABLISHED state, this newly added counter is
incremented. This helper is going to be used in the following patch.
Similar to MPTCP_INC_STATS(), a new helper called MPTCP_DEC_STATS() is
also needed to decrement a MIB counter.
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5cc98eba2592d6e3c5a4351319595ddde2a5901 ]
When a user tries to use the "sec=krb5p" mount parameter to encrypt
data on connection to a server (when authenticating with Kerberos), we
indicate that it is not supported, but do not note the equivalent
recommended mount parameter ("sec=krb5,seal") which turns on encryption
for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a39c757bf0596b17482a507f31c3ef0af0d1d2b4 ]
Based on our implementation of multichannel, it is entirely
possible that a server struct may not be found in any channel
of an SMB session.
In such cases, we should be prepared to move on and search for
the server struct in the next session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6e02eefd6ace3da3369c764f15429f5647056af ]
When a tcon is marked for need_reconnect, the intention
is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect
when need_reconnect is set. Also, this change has a minor
correction in resetting need_reconnect on success. It makes
sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ce6e2db00de8103a0687fb0f65fd17124a51aaa ]
Ensure no remaining requests in virtqueues before resetting vdev and
deleting virtqueues. Otherwise these requests will never be completed.
It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become
in_flight status, but it cannot guarantee that requests have been
processed by the device. Virtqueues should never be deleted before
all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues
become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun <yi.sun@unisoc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55c7788c37242702868bfac7861cdf0c358d6c3d ]
Send query dir requests with an info level of
SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than
SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own
inode numbers (e.g. noserverino) so that reparse tags still
can be parsed directly from the responses, but server won't
send UniqueId (server inode number)
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2dcf82a8e8dc930655787797ef8a3692b527c7a9 ]
ta if invoke node buffer
|-------- ta type ----------|
|-------- ta id ----------|
|-------- cmd id ----------|
|------ shared buf len -----|
|------ shared buffer ------|
ta if invoke node buffer is as above, copy shared buffer data to correct location
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ef82ac664bb9568ca3956e0d9c9c478e25077ff ]
In the s3 suspend abort case some type of gfx9 power
rail not turn off from FCH side and this will put the
GPU in an unknown power status, so let's reset the gpu
to a known good power state before reinitialize gpu
device.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93bafa32a6918154aa0caf9f66679a32c2431357 ]
In the suspend abort cases, the gfx power rail doesn't turn off so
some GFXDEC registers/CSB can't reset to default value and at this
moment reinitialize GFXDEC/CSB will result in an unexpected error.
So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
