IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The property mediatek,drive-strength-adv was deprecated: change the
example for i2c0-pins to use drive-strength-microamp.
Fixes: b6d9af2c6b69 ("dt-bindings: pinctrl: mt8195: Add and use drive-strength-microamp")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220715103029.204500-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 7542766e78fc374d81d8c2db214c4b4308645277.
It was noted during follow-up that the approach is incorrect.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pass MODULE_DEVICE_TABLE() so that module autoloading can work.
This also aligns with the other i.MX8 pinctrl drivers.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20220712115154.2348971-1-festevam@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This SoC contains a pinctrl with a new register layout. Use the variant
parameter to set the right register offsets. This pinctrl also increases
the number of functions per pin from 8 to 16, taking advantage of all 4
bits in the mux config field (so far, only functions 0-8 and 14-15 are
used). This increases the maximum possible number of functions.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220713025233.27248-7-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the
pinctrl registers. This new layout widens the drive level field, which
affects the pull register offset and the overall bank size.
In order to support multiple register layouts, some of the layout
parameters need to be set based on the pinctrl variant. This requires
passing the pinctrl struct pointer to the register/offset calculation
functions.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-6-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the
pinctrl registers. This new layout widens the drive level field, which
affects the pull register offset and the overall bank size.
As a first step to support this, combine the register and offset
calculation functions, and refactor the math to depend on one constant
for field widths instead of three. This minimizes the code size impact
of making some of the factors dynamic.
While rewriting these functions, move them to the implementation file,
since that is the only file where they are used. And make the comment
more generic, without mentioning specific offsets/sizes.
The callers are updated to expect a shifted mask, and to use consistent
terminology (reg/shift/mask/val).
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-5-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
H616 and newer SoCs feature a 2.5V I/O bias mode in addition to the
1.8V and 3.3V modes. This mode is entered by selecting the 3.3V level
and disabling the "withstand function".
H616 supports this capability on its main PIO only. A100 supports this
capability on both its PIO and R-PIO.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-4-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
H6 requires I/O bias configuration on both of its PIO devices.
Previously it was only done for the main PIO.
The setting for Port L is at bit 0, so the bank calculation needs to
account for the pin base. Otherwise the wrong bit is used.
Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-3-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
D1 contains a pin controller similar to previous SoCs, but with some
register layout changes. It includes 6 interrupt-capable pin banks.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220713025233.27248-2-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document the compatible for PMP8074 which has 12 GPIO-s with holes at
GPIO1 and GPIO12.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220711203408.2949888-3-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the 'gpio-line-names' property to mt8195-pinctrl, as this will be
used in devicetrees to describe pin names.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220630110453.186526-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As was already done for MT8192 in commit b52e695324bb ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.
Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.
Fixes: 69c3d58dc187 ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630131543.225554-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When this property was introduced, it contained underscores, but
the actual code wants dashes.
Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.
Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Allwinner H616 SoC contains a VCC_PI pin, which supplies the voltage
for GPIO port I.
Extend the range of supply port names to include vcc-pi-supply to cover
that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
interrupt (it features only two pins).
However the binding requires at least naming one upstream interrupt,
plus the #interrupt-cells and interrupt-controller properties.
Drop the unconditional requirement for the interrupt properties, and
make them dependent on being not this particular pinctrl device.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-3-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Document the "qcom,msm8909-tlmm" compatible for the TLMM/pin control
block in the MSM8909 SoC, together with the allowed GPIOs and functions.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pinctrl dt_node_to_map method may be called in parallel which leads
us to call pinconf_generic_add_group and pinconf_generic_add_function
in parallel. This is not supported though and leads to errors, so add a
mutex to serialize these calls.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220627085333.1774396-1-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add support for the RZ/V2M and R-Car V4H SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYsf0YAAKCRCKwlD9ZEnx
cNBbAP48c3HrPanpixUyw1W6c+kJ69/2jb1DFWFOOTXganjmmAD/YlnxcMyXnXTd
Lg59myS2XuSKaR8bSITCxpi3ou7fZAQ=
=uVgK
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.20 (take two)
- Add support for the RZ/V2M and R-Car V4H SoCs,
- Miscellaneous fixes and improvements.
Saving/restoring interrupt and wake status bits across suspend can
cause the suspend to fail if an IRQ is serviced across the
suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Fixes: 79d2c8bede2c ("pinctrl/amd: save pin registers over suspend/resume")
Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Update MAINTAINERS to set the Intel pin control status to Supported
* Switch Intel pin control drivers to use struct pingroup
The following is an automated git shortlog grouped by driver:
baytrail:
- Switch to to embedded struct pingroup
cherryview:
- Switch to to embedded struct pingroup
intel:
- Add Intel Meteor Lake pin controller support
- Drop no more used members of struct intel_pingroup
- Switch to to embedded struct pingroup
- Embed struct pingroup into struct intel_pingroup
lynxpoint:
- Switch to to embedded struct pingroup
MAINTAINERS:
- Update Intel pin control to Supported
Merge branch 'ib-v5.20-amd-pinctrl':
- Merge branch 'ib-v5.20-amd-pinctrl'
merrifield:
- Switch to to embedded struct pingroup
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYsiWNwAKCRD7cr9lmVa5
zMoGAQDMB1dDqEbeEirmRy1/JKYjT0eV3BNxNhE2+jXOa22hMgEA/jTOhJvWblHI
F7G1epH2hyvF/Z/+10UmmI4RDKd0Eg0=
=Qzxi
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.20-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.20-1
* Update MAINTAINERS to set the Intel pin control status to Supported
* Switch Intel pin control drivers to use struct pingroup
The following is an automated git shortlog grouped by driver:
baytrail:
- Switch to to embedded struct pingroup
cherryview:
- Switch to to embedded struct pingroup
intel:
- Add Intel Meteor Lake pin controller support
- Drop no more used members of struct intel_pingroup
- Switch to to embedded struct pingroup
- Embed struct pingroup into struct intel_pingroup
lynxpoint:
- Switch to to embedded struct pingroup
MAINTAINERS:
- Update Intel pin control to Supported
Merge branch 'ib-v5.20-amd-pinctrl':
- Merge branch 'ib-v5.20-amd-pinctrl'
merrifield:
- Switch to to embedded struct pingroup
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips.
Following this change the following warning is now observed for the SPMI
PMIC pinctrl driver:
gpio gpiochip1: (200f000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the SPMI PMIC pinctrl driver immutable.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220624195112.894916-1-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds missing ERROROUTC_A settings.
Current existing ERROROUTC should be _B, this patch tidies it up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtdtsj8m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car V4H has PWM/PWM_A/PWM_B, but current PFC setting is mixed.
This patch adds missing PWM settings, and tidies these up.
According to Document, GP3_14 Function4 is PWM2_A,
but we can't select it at P1SR3[27:24].
This patch just ignore it for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7y9sj90.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing FlexRay pins.
Because Document (Rev.0.51) has 2x FXR_TXENA/B pin with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmipsj9a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing SCIF1_X.
Because Document (Rev.0.51) has 2x SCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu81sja1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car V4H has SCIF3 and SCIF3_A, but current PFC setting is mixed.
This patch cleans up SCIF3/SCIF3_A, based on Rev.0.51.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8shsja7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing HSCIF1.
Because Document (Rev.0.51) has 2x HSCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wncxsjah.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X.
Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx,
GP1_23 - GP1_28 are 1.8/3.3V. But they are not on Table 7.28.
According to the HW team, there are no bits assigned.
This patch follows HW team's comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many MOD_SELx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many IPxSRx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Current R-Car V4H PFC code has many NOGP definitions. But these are not
used, and they are different from original usage. This patch removes
them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is
indicating that I2C needs 1. But we should use 0 for all cases in
reality. New Datasheet should be updated.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0)
SoC, including bias, drive strength and voltage control.
This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
