IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit be4e1304419c99a164b4c0e101c7c2a756b635b9 ]
For CONFIG_CPUMASK_OFFSTACK=y kernel, explicit allocation of cpumask
variable on stack is not recommended since it can cause potential stack
overflow.
Instead, kernel code should always use *cpumask_var API(s) to allocate
cpumask var in config-neutral way, leaving allocation strategy to
CONFIG_CPUMASK_OFFSTACK.
Use *cpumask_var API(s) to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240331053441.1276826-2-dawei.li@shingroup.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1162bc2f8f5de7da23d18aa4b7fbd4e93c369c50 ]
The value of an arithmetic expression directory * master->erasesize is
subject to overflow due to a failure to cast operands to a larger data
type before perfroming arithmetic
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240315093758.20790-1-arefev@swemel.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7931d32955e09d0a11b1fe0b6aac1bfa061c005c ]
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a50787349fadf66ac5c48f62e58d753878d2bb ]
Johannes missed parisc back when he introduced the compat version
of these syscalls, so receiving cmsg messages that require a compat
conversion is still broken.
Use the correct calls like the other architectures do.
Fixes: 1dacc76d0014 ("net/compat/wext: send different messages to compat tasks")
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae6428a9fffb2023191b0723e276cf1377a7c9f ]
sparc has two identical select syscalls at numbers 93 and 230, respectively.
During the conversion to the modern syscall.tbl format, the older one of the
two broke in compat mode, and now refers to the native 64-bit syscall.
Restore the correct behavior. This has very little effect, as glibc has
been using the newer number anyway.
Fixes: 6ff645dd683a ("sparc: add system call table generation support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54a4e5c16382e871c01dd82b47e930fdce30406b ]
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1623ad8ec04c771a54975fb84b22bc21c2dbcac1 ]
LAN8814 is a low-power, quad-port triple-speed (10BASE-T/100BASETX/1000BASE-T)
Ethernet physical layer transceiver (PHY). It supports transmission and
reception of data on standard CAT-5, as well as CAT-5e and CAT-6, unshielded
twisted pair (UTP) cables.
LAN8814 supports industry-standard QSGMII (Quad Serial Gigabit Media
Independent Interface) and Q-USGMII (Quad Universal Serial Gigabit Media
Independent Interface) providing chip-to-chip connection to four Gigabit
Ethernet MACs using a single serialized link (differential pair) in each
direction.
The LAN8814 SKU supports high-accuracy timestamping functions to
support IEEE-1588 solutions using Microchip Ethernet switches, as well as
customer solutions based on SoCs and FPGAs.
The LAN8804 SKU has same features as that of LAN8814 SKU except that it does
not support 1588, SyncE, or Q-USGMII with PCH/MCH.
This adds support for 10BASE-T, 100BASE-TX, and 1000BASE-T,
QSGMII link with the MAC.
Signed-off-by: Divya Koppera<divya.koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 54a4e5c16382 ("net: phy: micrel: add Microchip KSZ 9477 to the device table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad53f5f54f351e967128edbc431f0f26427172cf ]
The very first flush in any port will flush all learned addresses in all
ports. This can be observed by unplugging the cable from one port while
additional ports are connected and dumping the fdb entries.
This problem is caused by the initially wrong value programmed to the
REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and
SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when
ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit
takes effect and flushes all learned entries. After that call both bits
are reset and so the next port flush will not cause such problem again.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90f3feb24172185f1832636264943e8b5e289245 ]
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6e1532a2697b81da00bfb184e99d15e01e9d98c ]
Validate table family when looking up for it via NFTA_TABLE_HANDLE.
Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea4d4808e342ddf89ba24b93ffa2057005aaced ]
rockchip_pmx_set reset all pinmuxs in group to 0 in the case of error,
add missing bank data retrieval in that code to avoid setting mux on
unexpected pins.
Fixes: 14797189b35e ("pinctrl: rockchip: add return value to rockchip_set_mux")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Link: https://lore.kernel.org/r/20240606125755.53778-5-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ef6914e0bf578357b4c906ffe6b26e7eedb8ccf ]
The pinmux bits for GPIO3-B1 to GPIO3-B6 pins are not explicitly
specified in RK3328 TRM, however we can get hint from pad name and its
correspinding IOMUX setting for pins in interface descriptions. The
correspinding IOMIX settings for these pins can be found in the same
row next to occurrences of following pad names in RK3328 TRM.
GPIO3-B1: IO_TSPd5m0_CIFdata5m0_GPIO3B1vccio6
GPIO3-B2: IO_TSPd6m0_CIFdata6m0_GPIO3B2vccio6
GPIO3-B3: IO_TSPd7m0_CIFdata7m0_GPIO3B3vccio6
GPIO3-B4: IO_CARDclkm0_GPIO3B4vccio6
GPIO3-B5: IO_CARDrstm0_GPIO3B5vccio6
GPIO3-B6: IO_CARDdetm0_GPIO3B6vccio6
Add pinmux data to rk3328_mux_recalced_data as mux register offset for
these pins does not follow rockchip convention.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-3-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8448a6c817c2aa6c6af785b1d45678bd5977e8d ]
The pinmux bits for GPIO2-B0 to GPIO2-B6 actually have 2 bits width,
correct the bank flag for GPIO2-B. The pinmux bits for GPIO2-B7 is
recalculated so it remain unchanged.
The pinmux bits for those pins are not explicitly specified in RK3328
TRM, however we can get hint from pad name and its correspinding IOMUX
setting for pins in interface descriptions. The correspinding IOMIX
settings for GPIO2-B0 to GPIO2-B6 can be found in the same row next to
occurrences of following pad names in RK3328 TRM.
GPIO2-B0: IO_SPIclkm0_GPIO2B0vccio5
GPIO2-B1: IO_SPItxdm0_GPIO2B1vccio5
GPIO2-B2: IO_SPIrxdm0_GPIO2B2vccio5
GPIO2-B3: IO_SPIcsn0m0_GPIO2B3vccio5
GPIO2-B4: IO_SPIcsn1m0_FLASHvol_sel_GPIO2B4vccio5
GPIO2-B5: IO_ I2C2sda_TSADCshut_GPIO2B5vccio5
GPIO2-B6: IO_ I2C2scl_GPIO2B6vccio5
This fix has been tested on NanoPi R2S for fixing confliting pinmux bits
between GPIO2-B7 with GPIO2-B5.
Signed-off-by: Huang-Huang Bao <i@eh5.me>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 3818e4a7678e ("pinctrl: rockchip: Add rk3328 pinctrl support")
Link: https://lore.kernel.org/r/20240606125755.53778-2-i@eh5.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adec57ff8e66aee632f3dd1f93787c13d112b7a1 ]
In create_pinctrl(), pinctrl_maps_mutex is acquired before calling
add_setting(). If add_setting() returns -EPROBE_DEFER, create_pinctrl()
calls pinctrl_free(). However, pinctrl_free() attempts to acquire
pinctrl_maps_mutex, which is already held by create_pinctrl(), leading to
a potential deadlock.
This patch resolves the issue by releasing pinctrl_maps_mutex before
calling pinctrl_free(), preventing the deadlock.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 42fed7ba44e4 ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604085838.3344-1-hagarhem@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 279428df888319bf68f2686934897301a250bb84 ]
The scale value for the temperature channel is (assuming Vref=2.5 and
the datasheet):
376.7897513
When calculating both val and val2 for the temperature scale we
use (3767897513/25) and multiply it by Vref (here I assume 2500mV) to
obtain:
2500 * (3767897513/25) ==> 376789751300
Finally we divide with remainder by 10^9 to get:
val = 376
val2 = 789751300
However, we return IIO_VAL_INT_PLUS_MICRO (should have been NANO) as
the scale type. So when converting the raw temperature value to the
'processed' temperature value we will get (assuming raw=810,
offset=-753):
processed = (raw + offset) * scale_val
= (810 + -753) * 376
= 21432
processed += div((raw + offset) * scale_val2, 10^6)
+= div((810 + -753) * 789751300, 10^6)
+= 45015
==> 66447
==> 66.4 Celcius
instead of the expected 21.5 Celsius.
Fix this issue by changing IIO_VAL_INT_PLUS_MICRO to
IIO_VAL_INT_PLUS_NANO.
Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20240501150554.1871390-1-marc.ferland@sonatest.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b004fe33034cc64f72c20923be71cf1e6c9a624c ]
The next rework may require an unindentation of a code block in
ad5592r_read_raw(), which would make review a bit more difficult.
This change unindents the code block for reading the scale of the
non-temperature channels.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200706110259.23947-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 279428df8883 ("iio: dac: ad5592r: fix temperature channel scaling value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33c53cbf8f7bc8d62f6146a19da97c8594376ff0 ]
As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.
This also removes unused iio_dev pointers.
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 279428df8883 ("iio: dac: ad5592r: fix temperature channel scaling value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c625dabbf1c4a8e77e4734014f2fde7aa9071a1f ]
AMD Zen-based systems use a System Management Network (SMN) that
provides access to implementation-specific registers.
SMN accesses are done indirectly through an index/data pair in PCI
config space. The PCI config access may fail and return an error code.
This would prevent the "read" value from being updated.
However, the PCI config access may succeed, but the return value may be
invalid. This is in similar fashion to PCI bad reads, i.e. return all
bits set.
Most systems will return 0 for SMN addresses that are not accessible.
This is in line with AMD convention that unavailable registers are
Read-as-Zero/Writes-Ignored.
However, some systems will return a "PCI Error Response" instead. This
value, along with an error code of 0 from the PCI config access, will
confuse callers of the amd_smn_read() function.
Check for this condition, clear the return value, and set a proper error
code.
Fixes: ddfe43cdc0da ("x86/amd_nb: Add SMN and Indirect Data Fabric access for AMD Fam17h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403164244.471141-1-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57bdeef4716689d9b0e3571034d65cf420f6efcd ]
A config or MMIO read from a PCI device that doesn't exist or doesn't
respond causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.
Add a PCI_ERROR_RESPONSE definition for that and use it where appropriate
to make these checks consistent and easier to find.
Also add helper definitions PCI_SET_ERROR_RESPONSE() and
PCI_POSSIBLE_ERROR() to make the code more readable.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/55563bf4dfc5d3fdc96695373c659d099bf175b1.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Stable-dep-of: c625dabbf1c4 ("x86/amd_nb: Check for invalid SMN reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74751ef5c1912ebd3e65c3b65f45587e05ce5d36 ]
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a661 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bd27a847a3a4827a948387cc8f0dbc9fa5931d5 ]
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49c386ebbb43394ff4773ce24f726f6afc4c30c8 ]
This reverts commit 700dea5a0bea9f64eba89fae7cb2540326fdfdc1.
The reason for that commit was --sort=ORDER introduced in
tar 1.28 (2014). More than 3 years have passed since then.
Requiring GNU tar 1.28 should be fine now because we require
GCC 5.1 (2015).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Stable-dep-of: 3bd27a847a3a ("kheaders: explicitly define file modes for archived headers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5f390a77f18eaeb2c93211a1b7c5e66b5acd423 ]
The 'local-bd-address' property is used to pass a unique Bluetooth
device address from the boot firmware to the kernel and should otherwise
be left unset so that the OS can prevent the controller from being used
until a valid address has been provided through some other means (e.g.
using btmgmt).
Fixes: 60f77ae7d1c1 ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac4c1d794e7ff454d191bbdab7585ed8dbf3758 ]
Although the Samsung SoC keypad binding defined
linux,keypad-no-autorepeat property, Linux driver never implemented it
and always used linux,input-no-autorepeat. Correct the DTS to use
property actually implemented.
This also fixes dtbs_check errors like:
exynos4412-smdk4412.dtb: keypad@100a0000: 'key-A', 'key-B', 'key-C', 'key-D', 'key-E', 'linux,keypad-no-autorepeat' do not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+'
Cc: <stable@vger.kernel.org>
Fixes: c9b92dd70107 ("ARM: dts: Add keypad entries to SMDK4412")
Link: https://lore.kernel.org/r/20240312183105.715735-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88208d3cd79821117fd3fb80d9bcab618467d37b ]
Although the Samsung SoC keypad binding defined
linux,keypad-no-autorepeat property, Linux driver never implemented it
and always used linux,input-no-autorepeat. Correct the DTS to use
property actually implemented.
This also fixes dtbs_check errors like:
exynos4412-origen.dtb: keypad@100a0000: 'linux,keypad-no-autorepeat' does not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+'
Cc: <stable@vger.kernel.org>
Fixes: bd08f6277e44 ("ARM: dts: Add keypad entries to Exynos4412 based Origen")
Link: https://lore.kernel.org/r/20240312183105.715735-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87d8e522d6f5a004f0aa06c0def302df65aff296 ]
Although the Samsung SoC keypad binding defined
linux,keypad-no-autorepeat property, Linux driver never implemented it
and always used linux,input-no-autorepeat. Correct the DTS to use
property actually implemented.
This also fixes dtbs_check errors like:
exynos4210-smdkv310.dtb: keypad@100a0000: 'linux,keypad-no-autorepeat' does not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+'
Cc: <stable@vger.kernel.org>
Fixes: 0561ceabd0f1 ("ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN")
Link: https://lore.kernel.org/r/20240312183105.715735-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5a72477273066b5b357801ab2d315ef14949d402 upstream.
Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.
Sometimes it causes failure for the very first message transfer, that is
usually a device probe.
Hence, set IACK bit after core is enabled to clear pending interrupt.
Fixes: 18f98b1e3147 ("[PATCH] i2c: New bus driver for the OpenCores I2C controller")
Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@leica-geosystems.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1558bc57b8e5b4da5d821537cd30e2e660861d8 upstream.
Using gcov on kernels compiled with GCC 14 results in truncated 16-byte
long .gcda files with no usable data. To fix this, update GCOV_COUNTERS
to match the value defined by GCC 14.
Tested with GCC versions 14.1.0 and 13.2.0.
Link: https://lkml.kernel.org/r/20240610092743.1609845-1-oberpar@linux.ibm.com
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reported-by: Allison Henderson <allison.henderson@oracle.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a83e1385b780d41307433ddbc86e3c528db031f0 ]
Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid
"Info: mapping multiple BARs. Your kernel is fine.""). The initial
purpose of this commit was to stop memory mappings for operation
regions from overlapping page boundaries, as it can trigger warnings
if different page attributes are present.
However, it was found that when this situation arises, mapping
continues until the boundary's end, but there is still an attempt to
read/write the entire length of the map, leading to a NULL pointer
deference. For example, if a four-byte mapping request is made but
only one byte is mapped because it hits the current page boundary's
end, a four-byte read/write attempt is still made, resulting in a NULL
pointer deference.
Instead, map the entire length, as the ACPI specification does not
mandate that it must be within the same page boundary. It is
permissible for it to be mapped across different regions.
Link: https://github.com/acpica/acpica/pull/954
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218849
Fixes: d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine."")
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba383985354e83474f95f36d7c65feb75dba19d ]
This functions retrieves values by passing a pointer. As the function
that retrieves them can fail before touching the pointers, the variables
must be initialized.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ecd06277a7664f4ef018abae3abd3451d64e7a6 ]
When destroying all sets, we are either in pernet exit phase or
are executing a "destroy all sets command" from userspace. The latter
was taken into account in ip_set_dereference() (nfnetlink mutex is held),
but the former was not. The patch adds the required check to
rcu_dereference_protected() in ip_set_dereference().
Fixes: 4e7aaa6b82d6 ("netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type")
Reported-by: syzbot+b62c37cdd58103293a5a@syzkaller.appspotmail.com
Reported-by: syzbot+cfbe1da5fdfc39efc293@syzkaller.appspotmail.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141556.e0b6f17e-lkp@intel.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 604141c036e1b636e2a71cf6e1aa09d1e45f40c2 ]
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d864319871b05fadd153e0aede4811ca7008f5d6 ]
syzbot found hanging tasks waiting on rtnl_lock [1]
A reproducer is available in the syzbot bug.
When a request to add multiple actions with the same index is sent, the
second request will block forever on the first request. This holds
rtnl_lock, and causes tasks to hang.
Return -EAGAIN to prevent infinite looping, while keeping documented
behavior.
[1]
INFO: task kworker/1:0:5088 blocked for more than 143 seconds.
Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000
Workqueue: events_power_efficient reg_check_chans_work
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5409 [inline]
__schedule+0xf15/0x5d00 kernel/sched/core.c:6746
__schedule_loop kernel/sched/core.c:6823 [inline]
schedule+0xe7/0x350 kernel/sched/core.c:6838
schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895
__mutex_lock_common kernel/locking/mutex.c:684 [inline]
__mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752
wiphy_lock include/net/cfg80211.h:5953 [inline]
reg_leave_invalid_chans net/wireless/reg.c:2466 [inline]
reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Reported-by: syzbot+b87c222546179f4513a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b87c222546179f4513a7
Signed-off-by: David Ruth <druth@chromium.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240614190326.1349786-1-druth@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b55e86736d5b492cf689125da2600f59c7d2c39 ]
Instead of relying only on the idrinfo->lock mutex for
bind/alloc logic, rely on a combination of rcu + mutex + atomics
to better scale the case where multiple rtnl-less filters are
binding to the same action object.
Action binding happens when an action index is specified explicitly and
an action exists which such index exists. Example:
tc actions add action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter add ... matchall action drop index 1
tc filter ls ...
filter protocol all pref 49150 matchall chain 0 filter protocol all pref 49150 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49151 matchall chain 0 filter protocol all pref 49151 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
filter protocol all pref 49152 matchall chain 0 filter protocol all pref 49152 matchall chain 0 handle 0x1
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 4 bind 3
When no index is specified, as before, grab the mutex and allocate
in the idr the next available id. In this version, as opposed to before,
it's simplified to store the -EBUSY pointer instead of the previous
alloc + replace combination.
When an index is specified, rely on rcu to find if there's an object in
such index. If there's none, fallback to the above, serializing on the
mutex and reserving the specified id. If there's one, it can be an -EBUSY
pointer, in which case we just try again until it's an action, or an action.
Given the rcu guarantees, the action found could be dead and therefore
we need to bump the refcount if it's not 0, handling the case it's
in fact 0.
As bind and the action refcount are already atomics, these increments can
happen without the mutex protection while many tcf_idr_check_alloc race
to bind to the same action instance.
In case binding encounters a parallel delete or add, it will return
-EAGAIN in order to try again. Both filter and action apis already
have the retry machinery in-place. In case it's an unlocked filter it
retries under the rtnl lock.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20231211181807.96028-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d864319871b0 ("net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b9130247f3b6a1122478471ff0e014ea96bb735 ]
syzbot reported a memory leak in nr_create() [0].
Commit 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
added sock_hold() to the nr_heartbeat_expiry() function, where
a) a socket has a SOCK_DESTROY flag or
b) a listening socket has a SOCK_DEAD flag.
But in the case "a," when the SOCK_DESTROY flag is set, the file descriptor
has already been closed and the nr_release() function has been called.
So it makes no sense to hold the reference count because no one will
call another nr_destroy_socket() and put it as in the case "b."
nr_connect
nr_establish_data_link
nr_start_heartbeat
nr_release
switch (nr->state)
case NR_STATE_3
nr->state = NR_STATE_2
sock_set_flag(sk, SOCK_DESTROY);
nr_rx_frame
nr_process_rx_frame
switch (nr->state)
case NR_STATE_2
nr_state2_machine()
nr_disconnect()
nr_sk(sk)->state = NR_STATE_0
sock_set_flag(sk, SOCK_DEAD)
nr_heartbeat_expiry
switch (nr->state)
case NR_STATE_0
if (sock_flag(sk, SOCK_DESTROY) ||
(sk->sk_state == TCP_LISTEN
&& sock_flag(sk, SOCK_DEAD)))
sock_hold() // ( !!! )
nr_destroy_socket()
To fix the memory leak, let's call sock_hold() only for a listening socket.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
[0]: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Reported-by: syzbot+d327a1f3b12e1e206c16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d327a1f3b12e1e206c16
Fixes: 409db27e3a2e ("netrom: Fix use-after-free of a listening socket.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f36169912331fa035d7b73a91252d7c2512eb1a ]
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69c3 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce5cdd3b05216b704a704f466fb4c2dff3778caf ]
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not.
Fixes: ab327f8acdf8 ("mips: bmips: BCM6358: disable RAC flush for TP1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae9daffd9028f2500c9ac1517e46d4f2b57efb80 ]
read_config_dword() contains strange condition checking ret for a
number of values. The ret variable, however, is always zero because
config_access() never returns anything else. Thus, the retry is always
taken until number of tries is exceeded.
The code looks like it wants to check *val instead of ret to see if the
read gave an error response.
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29b83a64df3b42c88c0338696feb6fdcd7f1f3b7 ]
The standard PCIe configuration read-write interface is used to
access the configuration space of the peripheral PCIe devices
of the mips processor after the PCIe link surprise down, it can
generate kernel panic caused by "Data bus error". So it is
necessary to add PCIe link status check for system protection.
When the PCIe link is down or in training, assigning a value
of 0 to the configuration address can prevent read-write behavior
to the configuration space of peripheral PCIe devices, thereby
preventing kernel panic.
Signed-off-by: Songyang Li <leesongyang@outlook.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 256df20c590bf0e4d63ac69330cf23faddac3e08 ]
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails
with the following sequence:
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe. This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.
Add the system to bridge_d3_blacklist to prevent D3cold from being used.
Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@free.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
