IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.
After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.
This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.
[ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec
Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.
Fixes: e4ac7cc6e5a4 ("net: fec: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current codebase contained the usage of two different names for this
driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users
to use, especially when trying to bind or unbind the driver manually.
The corresponding kernel module is registered with the name of `gve`.
It's more reasonable to align the name of the driver with the module.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Cc: csully@google.com
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for the return value of skb_copy in order to avoid NULL pointer
dereference.
Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The blamed commit introduces usage of fixed_phy_register() but
not a corresponding dependency on FIXED_PHY.
This can result in a build failure.
s390-linux-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_phy_open':
drivers/net/ethernet/microchip/lan743x_main.c:1514: undefined reference to `fixed_phy_register'
Fixes: 624864fbff92 ("net: lan743x: add fixed phy support for LAN7431 device")
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/netdev/725bf1c5-b252-7d19-7582-a6809716c7d6@infradead.org/
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Klein reported that udp6_ehash_secret was initialized but never used.
Fixes: 1bbdceef1e53 ("inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Schnelle says:
====================
s390/ism: Fixes to client handling
This is v2 of the patch previously titled "s390/ism: Detangle ISM client
IRQ and event forwarding". As suggested by Paolo Abeni I split the patch
up. While doing so I noticed another problem that was fixed by this patch
concerning the way the workqueues access the client structs. This means the
second patch turning the workqueues into simple direct calls also fixes
a problem. Finally I split off a third patch just for fixing
ism_unregister_client()s error path.
The code after these 3 patches is identical to the result of the v1 patch
except that I also turned the dev_err() for still registered DMBs into
a WARN().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When ism_unregister_client() is called but the client still has DMBs
registered it returns -EBUSY and prints an error. This only happens
after the client has already been unregistered however. This is
unexpected as the unregister claims to have failed. Furthermore as this
implies a client bug a WARN() is more appropriate. Thus move the
deregistration after the check and use WARN().
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the clients_lock was protecting the clients array against
concurrent addition/removal of clients but was also accessed from IRQ
context. This meant that it had to be a spinlock and that the add() and
remove() callbacks in which clients need to do allocation and take
mutexes can't be called under the clients_lock. To work around this these
callbacks were moved to workqueues. This not only introduced significant
complexity but is also subtly broken in at least one way.
In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to
communicate the added/removed ISM device to the work function. While
write access to client[i]->tgt_ism is protected by the clients_lock and
the code waits that there is no pending add/remove work before and after
setting clients[i]->tgt_ism this is not enough. The problem is that the
wait happens based on per ISM device counters. Thus a concurrent
ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite
a clients[i]->tgt_ism between unlocking the clients_lock and the
subsequent wait for the work to finnish.
Thankfully with the clients_lock no longer held in IRQ context it can be
turned into a mutex which can be held during the calls to add()/remove()
completely removing the need for the workqueues and the associated
broken housekeeping including the per ISM device counters and the
clients[i]->tgt_ism.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The clients array references all registered clients and is protected by
the clients_lock. Besides its use as general list of clients the clients
array is accessed in ism_handle_irq() to forward ISM device events to
clients.
While the clients_lock is taken in the IRQ handler when calling
handle_event() it is however incorrectly not held during the
client->handle_irq() call and for the preceding clients[] access leaving
it unprotected against concurrent client (un-)registration.
Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb()
and ism_unregister_dmb() are not protected by any lock. This is
especially problematic as the client ID from the ism->sba_client_arr[]
is not checked against NO_CLIENT and neither is the client pointer
checked.
Instead of expanding the use of the clients_lock further add a separate
array in struct ism_dev which references clients subscribed to the
device's events and IRQs. This array is protected by ism->lock which is
already taken in ism_handle_irq() and can be taken outside the IRQ
handler when adding/removing subscribers or the accessing
ism->sba_client_arr[]. This also means that the clients_lock is no
longer taken in IRQ context.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turning IRQs off is done by accessing Ethernet controller registers.
That can't be done until device's clock is enabled. It results in a SoC
hang otherwise.
This bug remained unnoticed for years as most bootloaders keep all
Ethernet interfaces turned on. It seems to only affect a niche SoC
family BCM47189. It has two Ethernet controllers but CFE bootloader uses
only the first one.
Fixes: 34322615cbaa ("net: bgmac: Mask interrupts during probe")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tracepoint has existed for 12 years, but it only covered udp
over the legacy IPv4 protocol. Having it enabled for udp6 removes
the unnecessary difference in error visibility.
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Fixes: 296f7ea75b45 ("udp: add tracepoints for queueing skb to rcvbuf")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the probe error path code that leaves the driver bound
to the device, but with essentially a dead device. This was
useful maybe twice early in the driver's life and no longer
makes sense to keep.
Fixes: 30a1e6d0f8e2 ("ionic: keep ionic dev on lif init fail")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary early code development check and the WARN_ON
that it uses. The irq alloc and free paths have long been
cleaned up and this check shouldn't have stuck around so long.
Fixes: 77ceb68e29cc ("ionic: Add notifyq support")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moved PTP pointer validation before its use to avoid smatch warning.
Also used kzalloc/kfree instead of devm_kzalloc/devm_kfree.
Fixes: 2ef4e45d99b1 ("octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In legacy silicon, promiscuous mode is only modified
through CGX mbox messages. In CN10KB silicon, it is modified
from CGX mbox and NIX. This breaks legacy application
behaviour. Fix this by removing call from NIX.
Fixes: d6c9784baf59 ("octeontx2-af: Invoke exact match functions if supported")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-05 (igc)
This series contains updates to igc driver only.
Husaini adds check to increment Qbv change error counter only on taprio
Qbvs. He also removes delay during Tx ring configuration and
resolves Tx hang that could occur when transmitting on a gate to be
closed.
Prasad Koya reports ethtool link mode as TP (twisted pair).
Tee Min corrects value for max SDU.
Aravindhan ensures that registers for PPS are always programmed to occur
in future.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current duplex mode was unset in the driver, resulting in the default
parameter being set to 0, which corresponds to half duplex. It might
mislead users to have incorrect expectation about the driver's
transmission capabilities.
Set the default duplex configuration to full, as the driver runs in
full duplex mode at this point.
Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Message-ID: <20230706044128.2726747-1-junfeng.guo@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-05 (ice)
This series contains updates to ice driver only.
Sridhar fixes incorrect comparison of max Tx rate limit to occur against
each TC value rather than the aggregate. He also resolves an issue with
the wrong VSI being used when setting max Tx rate when TCs are enabled.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix tx queue rate limit when TCs are configured
ice: Fix max_rate check while configuring TX rate limits
====================
Link: https://lore.kernel.org/r/20230705201346.49370-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSlrvAACgkQSD+KveBX
+j4EcggAsZlHQHRaA9re/5Fr8VV/YNmf+eLM6/2F6CD1sLcwWEsmDXkqZpL/wqVv
bcP/dE/ehiMd1FI6XmEb9aGZY29mQBoItwCnxeUrK75d8CQib/pH87VkQdT9Uf6W
RVqPk2rOL778sTy6V/UZDecfmZB5XfEoOO6f0YP/j2t8HxmfdetBN0orE0iRQBmO
+0W8X5bIfCmGyWdQzOJB4a+S7Wi1JACr6CIOdNtADuZ7C7kKiPWrvEl7DMHlyX3Y
TyrE//piSJuxaHwdMNBHPsXK5ZYyn7ZJjqeCA+Kd+lKMJlJEO7R+TkTOP0RKE++a
ZdDetCqLKegQPpWZgjGzei7PpSpaFA==
=cNgk
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-07-05
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: RX, Fix page_pool page fragment tracking for XDP
net/mlx5: Query hca_cap_2 only when supported
net/mlx5e: TC, CT: Offload ct clear only once
net/mlx5e: Check for NOT_READY flag state after locking
net/mlx5: Register a unique thermal zone per device
net/mlx5e: RX, Fix flush and close release flow of regular rq for legacy rq
net/mlx5e: fix memory leak in mlx5e_ptp_open
net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create
net/mlx5e: fix double free in mlx5e_destroy_flow_table
====================
Link: https://lore.kernel.org/r/20230705175757.284614-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the event of a failure in tcf_change_indev(), fw_set_parms() will
immediately return an error after incrementing or decrementing
reference counter in tcf_bind_filter(). If attacker can control
reference counter to zero and make reference freed, leading to
use after free.
In order to prevent this, move the point of possible failure above the
point where the TC_FW_CLASSID is handled.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: M A Ramdhan <ramdhan@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Message-ID: <20230705161530.52003-1-ramdhan@starlabs.sg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some cases as below, we may encounter the unpreditable chip stats
in driver probe()
* The system reboot flow do not work properly, such as kernel oops while
rebooting, and then the driver do not go back to default status at
this moment.
* Similar to the flow above. If the device was enabled in BIOS or UEFI,
the system may switch to Linux without driver fully shutdown.
To avoid the problem, force push the device back to default in probe()
* mt7921e_mcu_fw_pmctrl() : return control privilege to chip side.
* mt7921_wfsys_reset() : cleanup chip config before resource init.
Error log
[59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010
[59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout
[59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout
[59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout
[59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout
[59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout
[59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout
[59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout
[59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout
[59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout
[59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout
[59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.923845] mt7921e 0000:02:00.0: hardware init failed
Cc: stable@vger.kernel.org
Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Juan Martinez <juan.martinez@amd.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Fix dropping of oversize preemptible frames with felix DSA driver
It has been reported that preemptible traffic doesn't completely behave
as expected. Namely, large packets should be able to be squeezed
(through fragmentation) through taprio time slots smaller than the
transmission time of the full frame. That does not happen due to logic
in the driver (for oversize frame dropping with taprio) that was not
updated in order for this use case to work.
I am not sure whether it qualifies as "net" material, because some
structural changes are involved, and it is a "never worked" scenario.
OTOH, this is a complaint coming from users for a v6.4 kernel.
It's up to maintainers to decide whether this series can be considered;
I've submitted it as non-RFC in the optimistic case that it will be :)
Demo script illustrating the issue below.
add_taprio()
{
local ifname=$1
echo "Creating root taprio"
tc qdisc replace dev $ifname handle 8001: parent root stab overhead 24 taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 \
sched-entry S 01 1216 \
sched-entry S fe 12368 \
fp P E E E E E E E \
flags 0x2
}
remove_taprio()
{
local ifname=$1
echo "Removing taprio"
tc qdisc del dev $ifname root
}
ip netns add ns0
ip link set eno0 netns ns0 && ip -n ns0 link set eno0 up && ip -n ns0 addr add 192.168.100.1/24 dev eno0
ip addr add 192.168.100.2/24 dev swp0 && ip link set swp0 up
ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled on verify-enabled off tx-enabled on
ethtool --set-mm swp0 pmac-enabled on verify-enabled off tx-enabled on
add_taprio swp0
ping 192.168.100.1 -s 1000 -c 5 # sent through TC0
ethtool -I --show-mm swp0 | grep MACMergeFragCountTx # should increase
ip addr flush swp0 && ip link set swp0 down
remove_taprio swp0
ethtool --set-mm swp0 pmac-enabled off verify-enabled off tx-enabled off
ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled off verify-enabled off tx-enabled off
ip netns del ns0
====================
Link: https://lore.kernel.org/r/20230705104422.49025-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This switch implements Hold/Release in a strange way, with no control
from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC
and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly
based on the schedule.
Namely, when the gate of a preemptible TC is about to close (actually
QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event),
the QSYS seems to emit a HOLD request pulse towards the MAC which
preempts the currently transmitted packet, and further packets are held
back in the queue system.
This allows large frames to be squeezed through small time slots,
because HOLD requests initiated by the gate events result in the frame
being segmented in multiple fragments, the bit time of which is equal to
the size of the time slot.
It has been reported that the vsc9959_tas_guard_bands_update() logic
breaks this, because it doesn't take preemptible TCs into account, and
enables oversized frame dropping when the time slot doesn't allow a full
MTU to be sent, but it does allow 2*minFragSize to be sent (128B).
Packets larger than 128B are dropped instead of being sent in multiple
fragments.
Confusingly, the manual says:
| For guard band, SDU calculation of a traffic class of a port, if
| preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then
| QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise
| QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used.
but this only refers to the static guard band durations, and the
QMAXSDU_CFG_* registers have dual purpose - the other being oversized
frame dropping, which takes place irrespective of whether frames are
preemptible or express.
So, to fix the problem, we need to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and modify the guard
band logic to consider a different (lower) oversize limit for
preemptible traffic classes.
Fixes: 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-4-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future change we will need to make
ocelot_port_update_active_preemptible_tcs() call
vsc9959_tas_guard_bands_update(), but that is currently not possible,
since the ocelot switch lib does not have access to functions private to
the DSA wrapper.
Move the pointer to vsc9959_tas_guard_bands_update() from felix->info
(which is private to the DSA driver) to ocelot->ops (which is also
visible to the ocelot switch lib).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a future commit we will have to call vsc9959_tas_guard_bands_update()
from ocelot_port_update_active_preemptible_tcs(), and that will be
impossible due to the AB/BA locking dependencies between
ocelot->tas_lock and ocelot->fwd_domain_lock.
Just like we did in commit 3ff468ef987e ("net: mscc: ocelot: remove
struct ocelot_mm_state :: lock"), the only solution is to expand the
scope of ocelot->fwd_domain_lock for it to also serialize changes made
to the Time-Aware Shaper, because those will have to result in a
recalculation of cut-through TCs, which is something that depends on the
forwarding domain.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Message-ID: <20230705104422.49025-2-vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c4IW
-----END PGP SIGNATURE-----
Merge tag 'nf-23-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix missing overflow use refcount checks in nf_tables.
2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker,
from Florian Westphal.
3) Bail out if nf_ct_helper_hash is NULL before registering helper,
from Florent Revest.
4) Use siphash() instead siphash_4u64() to fix performance regression,
also from Florian.
5) Do not allow to add rules to removed chains via ID,
from Thadeu Lima de Souza Cascardo.
6) Fix oob read access in byteorder expression, also from Thadeu.
netfilter pull request 23-07-06
====================
Link: https://lore.kernel.org/r/20230705230406.52201-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we boot with mvneta.txq_number=1, the txq_map is set incorrectly:
MVNETA_CPU_TXQ_ACCESS(1) refers to TX queue 1, but only TX queue 0 is
initialized. Fix this.
Fixes: 50bf8cb6fc9c ("net: mvneta: Configure XPS support")
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230705053712.3914-1-klaus.kudielka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9yzk
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
In this cycle, we've mainly investigated the zoned block device support along
with patches such as correcting write pointers between f2fs and storage, adding
asynchronous zone reset flow, and managing the number of open zones. Other than
them, f2fs adds another mount option, "errors=x" to specify how to handle when
it detects an unexpected behavior at runtime.
Enhancement:
- support errors=remount-ro|continue|panic mountoption
- enforce some inode flag policies
- allow .tmp compression given extensions
- add some ioctls to manage the f2fs compression
- improve looped node chain flow
- avoid issuing small-sized discard commands during checkpoint
- implement an asynchronous zone reset
Bug fix:
- fix deadlock in xattr and inode page lock
- fix and add sanity check in some error paths
- fix to avoid NULL pointer dereference f2fs_write_end_io() along with put_super
- set proper flags to quota files
- fix potential deadlock due to unpaired node_write lock use
- fix over-estimating free section during FG GC
- fix the wrong condition to determine atomic context
As usual, also there are a number of patches having code refactoring and minor
clean-ups.
-----BEGIN PGP SIGNATURE-----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=TAG3
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've mainly investigated the zoned block device
support along with patches such as correcting write pointers between
f2fs and storage, adding asynchronous zone reset flow, and managing
the number of open zones.
Other than them, f2fs adds another mount option, "errors=x" to specify
how to handle when it detects an unexpected behavior at runtime.
Enhancements:
- support 'errors=remount-ro|continue|panic' mount option
- enforce some inode flag policies
- allow .tmp compression given extensions
- add some ioctls to manage the f2fs compression
- improve looped node chain flow
- avoid issuing small-sized discard commands during checkpoint
- implement an asynchronous zone reset
Bug fixes:
- fix deadlock in xattr and inode page lock
- fix and add sanity check in some error paths
- fix to avoid NULL pointer dereference f2fs_write_end_io() along
with put_super
- set proper flags to quota files
- fix potential deadlock due to unpaired node_write lock use
- fix over-estimating free section during FG GC
- fix the wrong condition to determine atomic context
As usual, also there are a number of patches with code refactoring and
minor clean-ups"
* tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
f2fs: fix to do sanity check on direct node in truncate_dnode()
f2fs: only set release for file that has compressed data
f2fs: fix compile warning in f2fs_destroy_node_manager()
f2fs: fix error path handling in truncate_dnode()
f2fs: fix deadlock in i_xattr_sem and inode page lock
f2fs: remove unneeded page uptodate check/set
f2fs: update mtime and ctime in move file range method
f2fs: compress tmp files given extension
f2fs: refactor struct f2fs_attr macro
f2fs: convert to use sbi directly
f2fs: remove redundant assignment to variable err
f2fs: do not issue small discard commands during checkpoint
f2fs: check zone write pointer points to the end of zone
f2fs: add f2fs_ioc_get_compress_blocks
f2fs: cleanup MIN_INLINE_XATTR_SIZE
f2fs: add helper to check compression level
f2fs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
f2fs: do more sanity check on inode
f2fs: compress: fix to check validity of i_compress_flag field
f2fs: add sanity compress level check for compressed file
...
* Fix some ordering problems with log items during log recovery.
* Don't deadlock the system by trying to flush busy freed extents while
holding on to busy freed extents.
* Improve validation of log geometry parameters when reading the
primary superblock.
* Validate the length field in the AGF header.
* Fix recordset filtering bugs when re-calling GETFSMAP to return more
results when the resultset didn't previously fit in the caller's buffer.
* Fix integer overflows in GETFSMAP when working with rt volumes larger
than 2^32 fsblocks.
* Fix GETFSMAP reporting the undefined space beyond the last rtextent.
* Fix filtering bugs in GETFSMAP's log device backend if the log ever
becomes longer than 2^32 fsblocks.
* Improve validation of file offsets in the GETFSMAP range parameters.
* Fix an off by one bug in the pmem media failure notification
computation.
* Validate the length field in the AGI header too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZKL9IwAKCRBKO3ySh0YR
prFLAQC+dp1bV5ShBPfYJMCSUS7gmZEge01QrLTqcpyu8mO5GgD/YLUdD2Iebc8t
AS1Awj1iec7AFtCWcd3bTeNZD7vL9w0=
=j/oi
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
- Fix some ordering problems with log items during log recovery
- Don't deadlock the system by trying to flush busy freed extents while
holding on to busy freed extents
- Improve validation of log geometry parameters when reading the
primary superblock
- Validate the length field in the AGF header
- Fix recordset filtering bugs when re-calling GETFSMAP to return more
results when the resultset didn't previously fit in the caller's
buffer
- Fix integer overflows in GETFSMAP when working with rt volumes larger
than 2^32 fsblocks
- Fix GETFSMAP reporting the undefined space beyond the last rtextent
- Fix filtering bugs in GETFSMAP's log device backend if the log ever
becomes longer than 2^32 fsblocks
- Improve validation of file offsets in the GETFSMAP range parameters
- Fix an off by one bug in the pmem media failure notification
computation
- Validate the length field in the AGI header too
* tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Remove unneeded semicolon
xfs: AGI length should be bounds checked
xfs: fix the calculation for "end" and "length"
xfs: fix xfs_btree_query_range callers to initialize btree rec fully
xfs: validate fsmap offsets specified in the query keys
xfs: fix logdev fsmap query result filtering
xfs: clean up the rtbitmap fsmap backend
xfs: fix getfsmap reporting past the last rt extent
xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
xfs: fix interval filtering in multi-step fsmap queries
xfs: fix bounds check in xfs_defer_agfl_block()
xfs: AGF length has never been bounds checked
xfs: journal geometry is not properly bounds checked
xfs: don't block in busy flushing when freeing extents
xfs: allow extent free intents to be retried
xfs: pass alloc flags through to xfs_extent_busy_flush()
xfs: use deferred frees for btree block freeing
xfs: don't reverse order of items in bulk AIL insertion
xfs: remove redundant initializations of pointers drop_leaf and save_leaf
There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and a
bit of new hardware support.
-----BEGIN PGP SIGNATURE-----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=gWkY
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and
a bit of new hardware support"
* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
pwm: Add Renesas RZ/G2L MTU3a PWM driver
pwm: mtk_disp: Fix the disable flow of disp_pwm
dt-bindings: pwm: restrict node name suffixes
pwm: pca9685: Switch i2c driver back to use .probe()
pwm: ab8500: Fix error code in probe()
MAINTAINERS: add pwm to PolarFire SoC entry
pwm: add microchip soft ip corePWM driver
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: meson: make full use of common clock framework
pwm: meson: don't use hdmi/video clock as mux parent
pwm: meson: switch to using struct clk_parent_data for mux parents
pwm: meson: remove not needed check in meson_pwm_calc
pwm: meson: fix handling of period/duty if greater than UINT_MAX
pwm: meson: modify and simplify calculation in meson_pwm_get_state
dt-bindings: pwm: Add R-Car V3U device tree bindings
dt-bindings: pwm: imx: add i.MX8QXP compatible
pwm: mediatek: Add support for MT7981
dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
...
- Whitespace clean-ups in binding examples
- Restrict node name suffixes to "-[0-9]+" for cases of multiple
instances which don't have unit-addresses
- Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema
-----BEGIN PGP SIGNATURE-----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=cRW/
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
- Whitespace clean-ups in binding examples
- Restrict node name suffixes to "-[0-9]+" for cases of multiple
instances which don't have unit-addresses
- Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
schema
* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: soc: qcom: stats: Update maintainer email
dt-bindings: cleanup DTS example whitespaces
dt-bindings: timestamp: restrict node name suffixes
dt-bindings: slimbus: restrict node name suffixes
dt-bindings: watchdog: restrict node name suffixes
dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
I225/6 hardware can be programmed to start PPS output once
the time in Target Time registers is reached. The time
programmed in these registers should always be into future.
Only then PPS output is triggered when SYSTIM register
reaches the programmed value. There are two modes in i225/6
hardware to program PPS, pulse and clock mode.
There were issues reported where PPS is not generated when
start time is in past.
Example 1, "echo 0 0 0 2 0 > /sys/class/ptp/ptp0/period"
In the current implementation, a value of '0' is programmed
into Target time registers and PPS output is in pulse mode.
Eventually an interrupt which is triggered upon SYSTIM
register reaching Target time is not fired. Thus no PPS
output is generated.
Example 2, "echo 0 0 0 1 0 > /sys/class/ptp/ptp0/period"
Above case, a value of '0' is programmed into Target time
registers and PPS output is in clock mode. Here, HW tries to
catch-up the current time by incrementing Target Time
register. This catch-up time seem to vary according to
programmed PPS period time as per the HW design. In my
experiments, the delay ranged between few tens of seconds to
few minutes. The PPS output is only generated after the
Target time register reaches current time.
In my experiments, I also observed PPS stopped working with
below test and could not recover until module is removed and
loaded again.
1) echo 0 <future time> 0 1 0 > /sys/class/ptp/ptp1/period
2) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
3) echo 0 0 0 1 0 > /sys/class/ptp/ptp1/period
After this PPS did not work even if i re-program with proper
values. I could only get this back working by reloading the
driver.
This patch takes care of calculating and programming
appropriate future time value into Target Time registers.
Fixes: 5e91c72e560c ("igc: Fix PPS delta between two synchronized end-points")
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
IEEE 802.1Q does not have clear definitions of what constitutes an
SDU (Service Data Unit), but IEEE Std 802.3 clause 3.1.2 does define
the MAC service primitives and clause 3.2.7 does define the MAC Client
Data for Q-tagged frames.
It shows that the mac_service_data_unit (MSDU) does NOT contain the
preamble, destination and source address, or FCS. The MSDU does contain
the length/type field, MAC client data, VLAN tag and any padding
data (prior to the FCS).
Thus, the maximum 802.3 frame size that is allowed to be transmitted
should be QueueMaxSDU (MSDU) + 16 (6 byte SA + 6 byte DA + 4 byte FCS).
Fixes: 92a0dcb8427d ("igc: offload queue max SDU from tc-taprio")
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
set TP bit in the 'supported' and 'advertising' fields. i225/226 parts
only support twisted pair copper.
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Prasad Koya <prasad@arista.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.
Now use `__dev_mc_unsync` to clean mc addresses when closing port.
Fixes: e20aa071cd95 ("nfp: fix schedule in atomic context when sync mc address")
Cc: stable@vger.kernel.org
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Message-ID: <20230705052818.7122-1-louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZKWhbwAKCRDbK58LschI
g4XPAPsE0BO25GLziHlTxhsXceSewwNzPTPbK/77Kl7jNVVF+wEAlh2og3OlUdiS
4RtwqyIoP7P4XZ5ii3XGylYN7wBHHgE=
=AIOh
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-07-05
We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 16 insertions(+), 4 deletions(-).
The main changes are:
1) Fix BTF to warn but not returning an error for a NULL BTF to still be
able to load modules under CONFIG_DEBUG_INFO_BTF, from SeongJae Park.
2) Fix xsk sockets to honor SO_BINDTODEVICE in bind(), from Ilya Maximets.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Honor SO_BINDTODEVICE on bind
bpf, btf: Warn but return no error for NULL btf from __register_btf_kfunc_id_set()
====================
Link: https://lore.kernel.org/r/20230705171716.6494-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently mlx5e releases pages directly to the page_pool for XDP_TX and
does page fragment counting for XDP_REDIRECT. RX pages from the
page_pool are leaking on XDP_REDIRECT because the xdp core will release
only one fragment out of MLX5E_PAGECNT_BIAS_MAX and subsequently the page
is marked as "skip release" which avoids the driver release.
A fix would be to take an extra fragment for XDP_REDIRECT and not set the
"skip release" bit so that the release on the driver side can handle the
remaining bias fragments. But this would be a shortsighted solution.
Instead, this patch converges the two XDP paths (XDP_TX and XDP_REDIRECT) to
always do fragment tracking. The "skip release" bit is no longer
necessary for XDP.
Fixes: 6f5742846053 ("net/mlx5e: RX, Enable skb page recycling through the page_pool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
On vport enable, where fw's hca caps are queried, the driver queries
hca_caps_2 without checking if fw truly supports them, causing a false
failure of vfs vport load and blocking SRIOV enablement on old devices
such as CX4 where hca_caps_2 support is missing.
Thus, add a check for the said caps support before accessing them.
Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Non-clear CT action causes a flow rule split, while CT clear action
doesn't and is just a header-rewrite to the current flow rule.
But ct offload is done in post_parse and is per ct action instance,
so ct clear offload is parsed multiple times, while its deleted once.
Fix this by post_parsing the ct action only once per flow attribute
(which is per flow rule) by using a offloaded ct_attr flag.
Fixes: 08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Prior to this patch only one "mlx5" thermal zone could have been
registered regardless of the number of individual mlx5 devices in the
system.
To fix this setup a unique name per device to register its own thermal
zone.
In order to not register a thermal zone for a virtual device (VF/SF) add
a check for PF device type.
The new name is a concatenation between "mlx5_" and "<PCI_DEV_BDF>", which
will also help associating a thermal zone with its PCI device.
$ lspci | grep ConnectX
00:04.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx]
00:05.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx]
$ cat /sys/devices/virtual/thermal/thermal_zone0/type
mlx5_0000:00:04.0
$ cat /sys/devices/virtual/thermal/thermal_zone1/type
mlx5_0000:00:05.0
Fixes: c1fef618d611 ("net/mlx5: Implement thermal zone")
CC: Sandipan Patra <spatra@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Wei Fang
Junfeng Guo
Azeem Shaikh
Jiasheng Jiang
Simon Horman
Ziyang Xuan
Eric Dumazet
Kuniyuki Iwashima
David S. Miller
Niklas Schnelle
Paolo Abeni
Rafał Miłecki
Ivan Babrou
Shannon Nelson
Nitya Sunkad
Sai Krishna
Ratheesh Kannoth
Jakub Kicinski
M A Ramdhan
Quan Zhou
Vladimir Oltean
Klaus Kudielka
Thadeu Lima de Souza Cascardo
Linus Torvalds
Aravindhan Gunasekaran
Tan Tee Min
Prasad Koya
Yinjun Zhang
Dragos Tatulea
Maher Sanalla
Yevgeny Kliteynik
Vlad Buslov
Saeed Mahameed