IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no
As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
All ext4 & jbd2 trace events starts with "dev Major:Minor".
While we are still improving/adding the ftrace events for FC,
let's fix last two remaining trace events to follow the same
convention.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/8f33b163f0f29df2491c03b79f8ac96890ea5184.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds commit_tid info in ext4_fc_commit_start/stop which is helpful
in debugging fast_commit issues.
For e.g. issues where due to jbd2 journal full commit, FC miss to commit
updates to a file.
Also improves TP_prink format string i.e. all ext4 and jbd2 trace events
starts with "dev MAjOR,MINOR". Let's follow the same convention while we
are still at it.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/ebcd6b9ab5b718db30f90854497886801ce38c63.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds commit_tid argument in ext4_fc_update_stats()
so that we can add this information too in jbd_debug logs.
This is also required in a later patch to pass the commit_tid info in
ext4_fc_commit_start/stop() trace events.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/dabda3f2919a60e01887e798bf5915216b451733.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds the transaction & inode tid info in trace events for
callers of ext4_fc_track_template(). This is helpful in debugging race
conditions where an inode could belong to two different transaction tids.
It also fixes the checkpatch warnings which says use tabs instead of
spaces.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c203c09dc11bb372803c430f621f25a4b8c2c8b4.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_fc_track_template() checks, whether the trace event
path belongs to replay or does sb has ineligible set, if yes it simply
returns. This patch pulls those checks before calling
ext4_fc_track_template() in the callers of ext4_fc_track_template().
[ Add checks to ext4_rename() which calls the __ext4_fc_track_*()
functions directly. -- TYT ]
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/3cd025d9c490218a92e6d8fb30b6123e693373e3.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This just puts trace_ext4_fc_commit_start(sb) & ktime_get()
for measuring FC commit time, after the check of whether sb
supports JOURNAL_FAST_COMMIT or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d53cf3e535924ec0a1eb41a560e96561b0727e7a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: stable@kernel.org
Fixes: aa75f4d3daae ("ext4: main fast-commit commit path")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Below commit removed all references of EXT4_FC_COMMIT_FAILED.
commit 0915e464cb274 ("ext4: simplify updating of fast commit stats")
Just remove it since it is not used anymore.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/c941357e476be07a1138c7319ca5faab7fb80fc6.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently I've got a report of BUG_ON trigerring during transaction
commit in ext4_journalled_writepage_callback() because we've spotted a
dirty page without buffers. Add WARN_ON_ONCE to
ext4_journalled_set_page_dirty() to catch the problematic condition
earlier where we have better chance of understanding which code path is
creating dirty data without preparing the page properly. Also update the
comment with current information when we are at it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220310101832.5645-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After moving to the new mount API, mb_optimize_scan mount option
handling was not working as expected due to the parsed value always
being overwritten by default. Refactor and fix this to the expected
behavior described below:
* mb_optimize_scan=1 - On
* mb_optimize_scan=0 - Off
* mb_optimize_scan not passed - On if no. of BGs > threshold else off
* Remounts retain previous value unless we explicitly pass the option
with a new value
Fixes: cebe85d570cf ("ext4: switch to the new mount api")
Cc: stable@kernel.org
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c98970fe99f26718586d02e942f293300fb48ef3.1646732698.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance. A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].
This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).
So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed. More discussion and background can be found in the
thread starting at [2].
[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com
Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Variable split_flag1 is being assigned a value that is never read,
it is being re-assigned a new value in the following code block.
The assignment is redundant and can be removed.
Cleans up clang scan build warning:
fs/ext4/extents.c:3371:2: warning: Value stored to 'split_flag1' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220301121644.997833-1-colin.i.king@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
when ext4 filesystem is created with 64k block size, ^extent and
^huge_file features. the upper_limit would underflow during the
computations in ext4_max_bitmap_size(). The problem is the size of block
index tree for such large block size is more than i_blocks can carry.
So fix the computation to count with this possibility. After this fix,
the 'res' cannot overflow loff_t on the extreme case of filesystem with
huge_files and 64K block size, so this patch also revert commit
75ca6ad408f4 ("ext4: fix loff_t overflow in ext4_max_bitmap_size()").
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220301111704.2153829-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove the excess description of @bh in ext4_mb_clear_bb() kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/ext4/mballoc.c:5895: warning: Excess function parameter 'bh'
description in 'ext4_mb_clear_bb'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220301092136.34764-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20220228024815.3952506-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds an extra checks in ext4_mb_mark_bb() function
to make sure we mark & report error if we were to mark/clear any
of the critical FS metadata specific bitmaps (&bail out) to prevent
from any accidental corruption.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/53cbb6f2573db162a57f935365050d8b1df202ee.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_mb_clear_bb() & ext4_group_add_blocks() only checks
whether the given block ranges (which is to be freed) belongs to any FS
metadata blocks or not, of the block's respective block group.
But to detect any FS error early, it is better to add more strict
checkings in those functions which checks whether the given blocks
belongs to any critical FS metadata or not within system-zone.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ddd9143d064774e32d6364a99667817c6e8bfdc0.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_set_bits() should actually be mb_set_bits() for uniform API naming
convention.
This is via below cmd -
grep -nr "ext4_set_bits" fs/ext4/ | cut -d ":" -f 1 | xargs sed -i 's/ext4_set_bits/mb_set_bits/g'
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f1f6ece1405b76a7a987e9145d1adfaf71e30695.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_free_blocks() function became too long and confusing, this patch
just pulls out the ext4_mb_clear_bb() function logic from it
which clears the block bitmap and frees it.
No functionality change in this patch
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/22c30fbb26ba409cf8aa5f0c7912970272c459e8.1644992610.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In case of flex_bg feature (which is by default enabled), extents for
any given inode might span across blocks from two different block group.
ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the
starting block group, but it fails to read it again when the extent length
boundary overflows to another block group. Then in this below loop it
accesses memory beyond the block group bitmap buffer_head and results
into a data abort.
for (i = 0; i < clen; i++)
if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state)
already++;
This patch adds this functionality for checking block group boundary in
ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different
block group.
w/o this patch, I was easily able to hit a data access abort using Power platform.
<...>
[ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters
[ 74.533214] EXT4-fs (loop3): shut down requested (2)
[ 74.536705] Aborting journal on device loop3-8.
[ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000
[ 74.703727] Faulting instruction address: 0xc0000000007bffb8
cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060]
pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0
lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0
sp: c000000015db7300
msr: 800000000280b033
dar: c00000005e980000
dsisr: 40000000
current = 0xc000000027af6880
paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01
pid = 5167, comm = mount
<...>
enter ? for help
[c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410
[c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000
[c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0
[c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0
[c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0
[c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10
[c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350
[c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40
[c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100
[c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70
[c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550
[c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0
[c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and
flex_group->free_clusters. This patch fixes that.
Identified based on code review of ext4_mb_mark_bb() function.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CONFIG_JBD2_DEBUG and jbd2_journal_enable_debug knobs were added in
update_t_max_wait(), since earlier it used to take a spinlock for
updating t_max_wait, which could cause a bottleneck while starting a
txn (start_this_handle()).
Since in previous patch, we have killed t_handle_lock completely, we
could get rid of this debug config and knob to let t_max_wait be
updated by default again.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/ad7319a601fd501079310747ce87d908e0944763.1644992076.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch kills t_handle_lock transaction spinlock completely from
jbd2.
To explain the reasoning, currently there were three sites at which
this spinlock was used.
1. jbd2_journal_wait_updates()
a. Based on careful code review it can be seen that, we don't need this
lock here. This is since we wait for any currently ongoing updates
based on a atomic variable t_updates. And we anyway don't take any
t_handle_lock while in stop_this_handle().
i.e.
write_lock(&journal->j_state_lock()
jbd2_journal_wait_updates() stop_this_handle()
while (atomic_read(txn->t_updates) { |
DEFINE_WAIT(wait); |
prepare_to_wait(); |
if (atomic_read(txn->t_updates) if (atomic_dec_and_test(txn->t_updates))
write_unlock(&journal->j_state_lock);
schedule(); wake_up()
write_lock(&journal->j_state_lock);
finish_wait();
}
txn->t_state = T_COMMIT
write_unlock(&journal->j_state_lock);
b. Also note that between atomic_inc(&txn->t_updates) in
start_this_handle() and jbd2_journal_wait_updates(), the
synchronization happens via read_lock(journal->j_state_lock) in
start_this_handle();
2. jbd2_journal_extend()
a. jbd2_journal_extend() is called with the handle of each process from
task_struct. So no lock required in updating member fields of handle_t
b. For member fields of h_transaction, all updates happens only via
atomic APIs (which is also within read_lock()).
So, no need of this transaction spinlock.
3. update_t_max_wait()
Based on Jan suggestion, this can be carefully removed using atomic
cmpxchg API.
Note that there can be several processes which are waiting for a new
transaction to be allocated and started. For doing this only one
process will succeed in taking write_lock() and allocating a new txn.
After that all of the process will be updating the t_max_wait (max
transaction wait time). This can be done via below method w/o taking
any locks using atomic cmpxchg.
For more details refer [1]
new = get_new_val();
old = READ_ONCE(ptr->max_val);
while (old < new)
old = cmpxchg(&ptr->max_val, old, new);
[1]: https://lwn.net/Articles/849237/
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d89e599658b4a1f3893a48c6feded200073037fc.1644992076.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_journal_wait_updates() is called with j_state_lock held. But if
there is a commit in progress, then this transaction might get committed
and freed via jbd2_journal_commit_transaction() ->
jbd2_journal_free_transaction(), when we release j_state_lock.
So check for journal->j_running_transaction everytime we release and
acquire j_state_lock to avoid use-after-free issue.
Link: https://lore.kernel.org/r/948c2fed518ae739db6a8f7f83f1d58b504f87d0.1644497105.git.ritesh.list@gmail.com
Fixes: 4f98186848707f53 ("jbd2: refactor wait logic for transaction updates into a common function")
Cc: stable@kernel.org
Reported-and-tested-by: syzbot+afa2ca5171d93e44b348@syzkaller.appspotmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 6e47a3cc68fc ("ext4: get rid of super block and sbi from
handle_mount_ops()") the 'abort' options stopped working. This is
because we're using ctx_set_mount_flags() helper that's expecting an
argument with the appropriate bit set, but instead got
EXT4_MF_FS_ABORTED which is a bit position. ext4_set_mount_flag() is
using set_bit() while ctx_set_mount_flags() was using bitwise OR.
Create a separate helper ctx_set_mount_flag() to handle setting the
mount_flags correctly.
While we're at it clean up the EXT4_SET_CTX macros so that we're only
creating helpers that we actually use to avoid warnings.
Fixes: 6e47a3cc68fc ("ext4: get rid of super block and sbi from handle_mount_ops()")
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Ye Bin <yebin10@huawei.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220201131345.77591-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Handle poisoned pages properly in the SGX reclaimer code
-----BEGIN PGP SIGNATURE-----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=5Bl4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the ptrace regset xfpregs_set() callback to behave according to
the ABI
- Handle poisoned pages properly in the SGX reclaimer code
* tag 'x86_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ptrace: Fix xfpregs_set()'s incorrect xmm clearing
x86/sgx: Fix missing poison handling in reclaimer
-----BEGIN PGP SIGNATURE-----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=EkNZ
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"Fix a long-standing struct alignment bug in the EDAC struct allocation
code"
* tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
Three fixes, all in drivers. The ufs and qedi fixes are minor; the
lpfc one is a bit bigger because it involves adding a heuristic to
detect and deal with common but not standards compliant behaviour.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYhFMriYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSAgAP49NgZf
qQfT/wk7sfrF2F1B6807hTPb6eY9CugBdBMU1wD9HsgeQRZ7JkYgoQGidzEGSuco
qrclT7ARGkJypFLFZNQ=
=jqv+
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers.
The ufs and qedi fixes are minor; the lpfc one is a bit bigger because
it involves adding a heuristic to detect and deal with common but not
standards compliant behaviour"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix divide by zero in ufshcd_map_queues()
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
Bunch of driver fixes for:
- ptdma error handling in init
- lock fix in at_hdmac
- error path and error num fix for sh dma
- pm balance fix for stm32
-----BEGIN PGP SIGNATURE-----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=5uHl
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes for:
- ptdma error handling in init
- lock fix in at_hdmac
- error path and error num fix for sh dma
- pm balance fix for stm32"
* tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: shdma: Fix runtime PM imbalance on error
dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
dmaengine: sh: rcar-dmac: Check for error num after setting mask
dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()
dmaengine: ptdma: Fix the error handling path in pt_core_init()
