IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Recently there was a fairly long thread about recoreable hardware page
faults, how they can deadlock, and what to do about that.
While the discussion is still fresh I figured good time to try and
document the conclusions a bit. This documentation section explains
what's the potential problem, and the remedies we've discussed,
roughly ordered from best to worst.
v2: Linus -> Linux typoe (Dave)
v3:
- Make it clear drivers only need to implement one option (Christian)
- Make it clearer that implicit sync is out the window with exclusive
fences (Christian)
- Add the fairly theoretical option of segementing the memory (either
statically or through dynamic checks at runtime for which piece of
memory is managed how) and explain why it's not a great idea (Felix)
References: https://lore.kernel.org/dri-devel/20210107030127.20393-1-Felix.Kuehling@amd.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
c: Dave Airlie <airlied@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210203152921.2429937-1-daniel.vetter@ffwll.ch
Panel power sequence says timing T8 (time from link idle to turn on
the backlight) should be at least 50 ms. This is what the .enable
delay in simple-panel is for, so set it. NOTE: this overlaps with the
80 ms .prepare_to_enable delay on purpose. The data sheet says that
at least 80 ms needs to pass between HPD going high and turning on the
backlight and that at least 50 ms needs to pass between the link idle
and the backlight going on. Thus it works like this on the system in
front of me:
* In bridge chip pre_enable call drm_panel_prepare()
* drm_panel_prepare() -> panel_simple_prepare()
* Wait for HPD GPIO to go high.
* Start counting for 80 ms (store in prepared_time)
* In bridge chip enable, train link then call drm_panel_enable()
* drm_panel_enable() -> panel_simple_enable()
* panel_simple_enable() does hardcoded 50 ms delay then enforces 80 ms
from HPD going high (in case the bridge took less than 30 ms to
enable / link train).
* drm_panel_enable() -> backlight_enable().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222081716.1.I1a45aece5d2ac6a2e73bbec50da2086e43e0862b@changeid
This panel is quite similar to the similarly named N116BGE panel (the
nominal timings are, in fact identical). However, let's add a new
entry because the full range of clocks listed for N116BGE aren't
supported for N116BCA-EA1, at least according to the datasheet.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.5.I3c01f3aab8335cb509da7009d8938c1a27a266dc@changeid
On an Innolux N116BCA panel that I have in front of me, sometimes HPD
simply doesn't assert no matter how long you wait for it. As per the
very wise advice of The IT Crowd ("Have you tried turning it off and
on again?") it appears that power cycling is enough to kick this panel
back into a sane state.
>From tests on this panel, it appears that leaving it powered off for a
while stimulates the problem. Adding a 6 second sleep at the start of
panel_simple_prepare_once() makes it happen fairly reliably and, with
this delay, I saw up to 3 retries needed sometimes. Without the 6
second sleep, however, the panel came up much more reliably the first
time or after only 1 retry.
While it's unknown what the problems are with this panel (and probably
the hardware should be debugged), adding a few retries to the power on
routine doesn't seem insane. Even if this panel's problems are
attributed to the fact that it's pre-production and/or can be fixed,
retries clearly can help in some cases and really don't hurt.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.3.I6916959daa7c5c915e889442268d23338de17923@changeid
If a panel has an hpd_absent_delay specified then we know exactly how
long the maximum time is before HPD must be asserted. That means we
can use it as a timeout for polling the HPD pin instead of using an
arbitrary timeout. This is especially useful for dealing with panels
that periodically fail to power on and need to be retried. We can
detect the problem sooner.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.2.I183b1817610d7a82fdd3bc852e96d2985df9623f@changeid
If the HPD signal never asserts in panel_simple_prepare() and we
return an error, we should unset the enable GPIO and disable the
regulator to make it consistent for the caller.
At the moment I have some hardware where HPD sometimes doesn't assert.
Obviously that needs to be debugged, but this patch makes it so that
if I add a retry that I can make things work.
Fixes: 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.1.I33fcbd64ab409cfe4f9491bf449f51925a4d3281@changeid
Document all of the DRM_CAP_* defines.
v2 (Pekka):
- Describe what the bit depth is
- Expand on preferred dumb buffer memory access patterns
- Explain what a PRIME buffer is
- Mention DRM_IOCTL_PRIME_FD_TO_HANDLE and DRM_IOCTL_PRIME_HANDLE_TO_FD
- Explicitly reference CLOCK_REALTIME and CLOCK_MONOTONIC
- Make it clear DRM_CAP_CRTC_IN_VBLANK_EVENT applies to both DRM_EVENT_VBLANK
and DRM_EVENT_FLIP_COMPLETE
v3 (Daniel):
- Specify kernel versions for caps that don't depend on drivers
- Make it clear dumb buffers caps are only about dumb buffers
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210308123421.747836-1-contact@emersion.fr
STM ltdc driver uses an empty implementation for its encoder.
Replace the code with the generic simple encoder.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com
Even though the JZ4740 did not have the OSD mode, it had (according to
the documentation) two DMA channels, but there is absolutely no
information about how to select the second DMA channel.
Make the ingenic-drm driver work in non-OSD mode by using the
foreground0 plane (which is bound to the DMA0 channel) as the primary
plane, instead of the foreground1 plane, which is the primary plane
when in OSD mode.
Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net
A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to
MIPI_DSI_MODE_NO_EOT_PACKET brought to light the
misunderstanding in the current MCDE driver and all
its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET
would mean "use EOT packet" when in fact it means the
reverse.
Fix it up by implementing the flag right in the MCDE
DSI driver and remove the flag from panels that actually
want the EOT packet.
Suggested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Fixes: 899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels")
Fixes: ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel")
Fixes: 435e06c06cb2 ("drm/panel: s6e63m0: Add DSI transport")
Fixes: 8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel")
Link: https://patchwork.freedesktop.org/patch/msgid/20210304004138.1785057-1-linus.walleij@linaro.org
By having selected DRM_XEN, I was assuming I would build the frontend
driver. As it turns out this is a dummy option, and I have really not
been building this (because I had DRM disabled). Make it a promptless
one, moving the "depends on" to the other, real option, and "select"ing
the dummy one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/54ae54f9-1ba9-900b-a56f-f48e2c9a82b0@suse.com
We should advertise the reworked fifo/cmd handling and huge pages
support. Also while bumping the version number lets cleanup
the logging, there's no point in logging whether we're atomic
(we always are) or what repo we use (it's always in kernel now).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224163034.918430-1-zackr@vmware.com
The only usage of nouveau_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-4-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The only usage of radeon_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-3-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The only usage of amdgpu_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-2-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
By default dma_buf_export() sets the exporter name to be
KBUILD_MODNAME. Unfortunately this may not be identical to the
string used as the heap name (ie: "system" vs "system_heap").
This can cause some minor confusion with tooling, and there is
the future potential where multiple heap types may be exported
by the same module (but would all have the same name).
So to avoid all this, set the exporter exp_name to the heap name.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209194818.2459062-2-john.stultz@linaro.org
It can be useful to access the name for the heap,
so provide an accessor to do so.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209194818.2459062-1-john.stultz@linaro.org
BO would be added into swap list if it is validated into system domain.
If BO is validated again into non-system domain, say, VRAM domain. It
actually should not be in the swap list.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224032808.150465-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
That way we can get rid of this final piece of init code, and use the
simple pipe helpers as intended.
v2: Fix indent (Sam)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-14-daniel.vetter@ffwll.ch
At less than 500 lines total feels like the right thing to do.
Also noticed that the simple wrapper around drm_connector_cleanup can
be dropped.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-13-daniel.vetter@ffwll.ch
Really not worth the function, much less the separate file now that
almost all the code is gone.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-12-daniel.vetter@ffwll.ch
Really not big anymore.
Note that we no longer clamp all errors to ENODEV, highlighted by Sam.
v2: Fixup update function, bug reported by Eugeniy
v3: Delete now unused crtc funcs (0day)
v4: Move encoder removal to right patch (Sam).
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-11-daniel.vetter@ffwll.ch
It's redundant, drm core guarantees that state->fb is set iff
state->crtc is set.
v2: I had a misconception about simple helpers here and thought they
filter this out. They don't. Issue reported by Eugeniy.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-10-daniel.vetter@ffwll.ch
Really straighforward, only slight issue is that the sim connector is
created after the pipe is set up, so can't use the helpers perfectly
yet. Subsequent patches will fix that.
Aside from lots of deleting code no functional changes in here.
v2: Delete now unused crtc funcs (0day)
v3: Move endcoder setup removal to right patch (Sam)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-9-daniel.vetter@ffwll.ch
Simple pipe helpers only have an enable and disable hook, no more
mode_set_nofb. Call it from our enable hook to align with that
conversions.
Atomic helpers always call mode_set_nofb and enable together, so
there's no functional change here.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-8-daniel.vetter@ffwll.ch
With autocleanup through drm_device management we can delete all the
code. Possible now that there's no confusion against devm_kzalloc'ed
structures anymore.
I inlined arcpgu_setup_mode_config because it's tiny and the newly
needed return value handling would have been more ...
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-7-daniel.vetter@ffwll.ch
drm_connector_register does nothing before drm_dev_register(), it
is meant for hotpluggable connectors only. Same for the unregister side.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-6-daniel.vetter@ffwll.ch
Removes the last devm_kzalloc, which means we're now prepared to use
drmm_mode_config_cleanup!
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-5-daniel.vetter@ffwll.ch
This is a prep step to convert arc over to the simple kms helpers, for
now we just use this as an embedding container to drop all the various
allocations. Big change is the removal of the various devm_kzalloc,
which have the wrong lifetimes anyway.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-4-daniel.vetter@ffwll.ch
Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-2-daniel.vetter@ffwll.ch
- Need to embedded the drm_device, but for now we keep the usual
pointer chasing.
- No more devm_kzalloc, which fixes a lifetime issues on driver
remove.
- No more drm_dev_put, that's done by devm_ now.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-1-daniel.vetter@ffwll.ch
dma-buf importing was reworked in commit 7d2cd72a9aa3
("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit
drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and
drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages()
unconditionally. Now without the use count set, put pages is called also
on dma-bufs. Fix this by only putting pages if it's not imported.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Fixes: 7d2cd72a9aa3 ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219122203.51130-1-noralf@tronnes.org
Only planes' prepare_fb and cleanup_fb, and encoders' atomic_check and
atomic_mode_set hooks remain with an object state and not the global
drm_atomic_state.
prepare_fb and cleanup_fb operate by design on a given state and
depending on the calling site can operate on either the old or new
state, so it doesn't really make much sense to convert them.
The encoders' atomic_check and atomic_mode_set operate on the CRTC and
connector state connected to them since encoders don't have a state of
their own. Without those state pointers, we would need to get the CRTC
through the drm_connector_state crtc pointer.
However, in order to get the drm_connector_state pointer, we would need
to get the connector itself and while usually we have a single connector
connected to the encoder, we can't really get it from the encoder at
the moment since it could be behind any number of bridges.
While this could be addressed by (for example) listing all the
connectors and finding the one that has the encoder as its source, it
feels like an unnecessary rework for something that is slowly getting
replaced by bridges.
Since all the users that matter have been converted, let's remove the
TODO item.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-11-maxime@cerno.tech
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_check hook, which would be the old
plane state in the global atomic state since _swap_state hasn't happened
when atomic_check is run.
Use the drm_atomic_get_old_plane_state helper to get that state to make
it more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@ replaces_old_state @
identifier plane_atomic_func.func;
identifier plane, state, plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
- struct drm_plane_state *plane_state = plane->state;
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}
@@
identifier plane_atomic_func.func;
identifier plane, state, plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<...
- plane->state
+ plane_state
...>
}
@ adds_old_state @
identifier plane_atomic_func.func;
identifier plane, state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
+ struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
<...
- plane->state
+ old_plane_state
...>
}
@ include depends on adds_old_state || replaces_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && (adds_old_state || replaces_old_state) @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-6-maxime@cerno.tech
