IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit eb44ad4e635132754bfbcb18103f1dcb7058aedd ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb4d124d34044179b42a769a0c76f389ae973b6 ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f0e11da7fb26db4f27e6b83a223512db9f7ca5 ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4:
In file included from ./include/linux/etherdevice.h:20:
In file included from ./include/linux/if_ether.h:19:
In file included from ./include/linux/skbuff.h:15:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6:
In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9:
In file included from ./include/linux/interrupt.h:8:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'mt7915_get_et_strings()',
'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same
reason: fortification logic inteprets call to 'memcpy()' as an attempt
to copy the whole array from its first member and so issues an overread
warning. These warnings may be silenced by passing an address of the whole
array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fce9c967820a72f600abbf061d7077861685a14d ]
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is
used, which according to its PCI Vendor ID is from "ITTIM Technology".
This chip works flawlessly with the mt7921e module. The driver doesn't
bind to this PCI device, because the Vendor ID from "ITTIM Technology" is
not recognized.
This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of
PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi
chip.
Signed-off-by: Ingo Rohloff <lundril@gmx.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d387e34fec407f881fdf165b5d7ec128ebff362f ]
Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
NRZ in their EEPROM.
The module also require the ignore tx fault fixup similar to Huawei MA5671A
as it gets disabled on error messages with serial redirection enabled.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2abc47a5a1a9f641e7cacdca643fdd40729bf6e ]
ghes_handle_aer() passes AER data to the PCI core for logging and
recovery by calling aer_recover_queue() with a pointer to struct
aer_capability_regs.
The problem was that aer_recover_queue() queues the pointer directly
without copying the aer_capability_regs data. The pointer was to
the ghes->estatus buffer, which could be reused before
aer_recover_work_func() reads the data.
To avoid this problem, allocate a new aer_capability_regs structure
from the ghes_estatus_pool, copy the AER data from the ghes->estatus
buffer into it, pass a pointer to the new struct to
aer_recover_queue(), and free it after aer_recover_work_func() has
processed it.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b302dce3d9edea5b93d1902a541684a967f3c63c ]
reg_cap.phy_id is extracted from WMI event and could be an unexpected value
in case some errors happen. As a result out-of-bound write may occur to
soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it.
This is found during code review.
Compile tested only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230830020716.5420-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb4c132ebfeac5962f7258ffc831caa0c4dada1a ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath10k/debug.c:8:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath10k_debug_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'ath10k_gstrings_stats' array from it's first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093652.234537-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc44a505a229bb1dd4957e11aa594edeea3690e ]
len is extracted from HTT message and could be an unexpected value in
case errors happen, so add validation before using to avoid possible
out-of-bound read in the following message iteration and parsing.
The same issue also applies to ppdu_info->ppdu_stats.common.num_users,
so validate it before using too.
These are found during code review.
Compile test only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230901015602.45112-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f97fe0ac974467ab4da215985a32b2fdf48af0 ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath9k/debug.c:17:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/ath/ath9k/htc_drv_debug.c:17:
In file included from drivers/net/wireless/ath/ath9k/htc.h:20:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath9k_get_et_strings()' and
'ath9k_htc_get_et_strings()' due to the same reason: fortification logic
inteprets call to 'memcpy()' as an attempt to copy the whole array from
it's first member and so issues an overread warning. These warnings may
be silenced by passing an address of the whole array and not the first
member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093856.234584-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d9111f3517f85ef2af0337ece02683ce0faf21 ]
Now that bpf_throw kfunc is the first such call instruction that has
noreturn semantics within the verifier, this also kicks in dead code
elimination in unprecedented ways. For one, any instruction following
a bpf_throw call will never be marked as seen. Moreover, if a callchain
ends up throwing, any instructions after the call instruction to the
eventually throwing subprog in callers will also never be marked as
seen.
The tempting way to fix this would be to emit extra 'int3' instructions
which bump the jited_len of a program, and ensure that during runtime
when a program throws, we can discover its boundaries even if the call
instruction to bpf_throw (or to subprogs that always throw) is emitted
as the final instruction in the program.
An example of such a program would be this:
do_something():
...
r0 = 0
exit
foo():
r1 = 0
call bpf_throw
r0 = 0
exit
bar(cond):
if r1 != 0 goto pc+2
call do_something
exit
call foo
r0 = 0 // Never seen by verifier
exit //
main(ctx):
r1 = ...
call bar
r0 = 0
exit
Here, if we do end up throwing, the stacktrace would be the following:
bpf_throw
foo
bar
main
In bar, the final instruction emitted will be the call to foo, as such,
the return address will be the subsequent instruction (which the JIT
emits as int3 on x86). This will end up lying outside the jited_len of
the program, thus, when unwinding, we will fail to discover the return
address as belonging to any program and end up in a panic due to the
unreliable stack unwinding of BPF programs that we never expect.
To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as
part of the BPF program, so that is_bpf_text_address returns true when
such a case occurs, and we are able to unwind reliably when the final
instruction ends up being a call instruction.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86565682e9053e5deb128193ea9e88531bbae9cf ]
This is based on alx driver commit 881d0327db37 ("net: alx: Work around
the DMA RX overflow issue").
The alx and atl1c drivers had RX overflow error which was why a custom
allocator was created to avoid certain addresses. The simpler workaround
then created for alx driver, but not for atl1c due to lack of tester.
Instead of using a custom allocator, check the allocated skb address and
use skb_reserve() to move away from problematic 0x...fc0 address.
Tested on AR8131 on Acer 4540.
Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Link: https://lore.kernel.org/r/20230912010711.12036-1-liew.s.piaw@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e160ab85166e77347d0cbe5149045cb25e83937f ]
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbaccdc42483c65016f1bae89128c08dc17cfb2a ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/virtual/mac80211_hwsim.c:18:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'mac80211_hwsim_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy the
whole 'mac80211_hwsim_gstrings_stats' array from its first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230829094140.234636-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbc86757ca62423c3b6bd8f7176da1ff43450769 ]
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In the above scenario, a fragmented packet is received for self peer,
for which rx_tid and rx_frags are not initialized in datapath.
While handling this fragment, crash is observed as the rx_frag list
is uninitialized and when we walk in ath12k_dp_rx_h_sort_frags,
skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
PC points to "ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]"
LR points to "ath12k_dp_process_rx_err+0x480/0xfcc [ath12k]".
The Backtrace obtained is as follows:
ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]
ath12k_dp_service_srng+0x78/0x260 [ath12k]
ath12k_pci_write32+0x990/0xb0c [ath12k]
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230821130343.29495-2-quic_hprem@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a763e92c78615ea838f5b9a841398b1d4adb968e ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/purelifi/plfxlc/mac.c:6:
In file included from ./include/linux/netdevice.h:24:
In file included from ./include/linux/timer.h:6:
In file included from ./include/linux/ktime.h:24:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'plfxlc_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'et_strings' array from its first member and so issues an
overread warning. This warning may be silenced by passing an address
of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829094541.234751-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e2b8b36820d8c91275f207e77e91645b7c6836 ]
Qi Zheng reported crashes in a production environment and provided a
simplified example as a reproducer:
| For example, if we use Qemu to start a two NUMA node kernel,
| one of the nodes has 2M memory (less than NODE_MIN_SIZE),
| and the other node has 2G, then we will encounter the
| following panic:
|
| BUG: kernel NULL pointer dereference, address: 0000000000000000
| <...>
| RIP: 0010:_raw_spin_lock_irqsave+0x22/0x40
| <...>
| Call Trace:
| <TASK>
| deactivate_slab()
| bootstrap()
| kmem_cache_init()
| start_kernel()
| secondary_startup_64_no_verify()
The crashes happen because of inconsistency between the nodemask that
has nodes with less than 4MB as memoryless, and the actual memory fed
into the core mm.
The commit:
9391a3f9c7f1 ("[PATCH] x86_64: Clear more state when ignoring empty node in SRAT parsing")
... that introduced minimal size of a NUMA node does not explain why
a node size cannot be less than 4MB and what boot failures this
restriction might fix.
Fixes have been submitted to the core MM code to tighten up the
memory topologies it accepts and to not crash on weird input:
mm: page_alloc: skip memoryless nodes entirely
mm: memory_hotplug: drop memoryless node from fallback lists
Andrew has accepted them into the -mm tree, but there are no
stable SHA1's yet.
This patch drops the limitation for minimal node size on x86:
- which works around the crash without the fixes to the core MM.
- makes x86 topologies less weird,
- removes an arbitrary and undocumented limitation on NUMA topologies.
[ mingo: Improved changelog clarity. ]
Reported-by: Qi Zheng <zhengqi.arch@bytedance.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/ZS+2qqjEO5/867br@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 265f3ed077036f053981f5eea0b5b43e7c5b39ff ]
All callers of work_on_cpu() share the same lock class key for all the
functions queued. As a result the workqueue related locking scenario for
a function A may be spuriously accounted as an inversion against the
locking scenario of function B such as in the following model:
long A(void *arg)
{
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
long B(void *arg)
{
}
void launchA(void)
{
work_on_cpu(0, A, NULL);
}
void launchB(void)
{
mutex_lock(&mutex);
work_on_cpu(1, B, NULL);
mutex_unlock(&mutex);
}
launchA and launchB running concurrently have no chance to deadlock.
However the above can be reported by lockdep as a possible locking
inversion because the works containing A() and B() are treated as
belonging to the same locking class.
The following shows an existing example of such a spurious lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted
------------------------------------------------------
kworker/0:1/9 is trying to acquire lock:
ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0
but task is already holding lock:
ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
__flush_work+0x83/0x4e0
work_on_cpu+0x97/0xc0
rcu_nocb_cpu_offload+0x62/0xb0
rcu_nocb_toggle+0xd0/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}:
__mutex_lock+0x81/0xc80
rcu_nocb_cpu_deoffload+0x38/0xb0
rcu_nocb_toggle+0x144/0x1d0
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
percpu_down_write+0x31/0x200
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
kthread+0xe6/0x120
ret_from_fork+0x2f/0x40
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work)
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((work_completion)(&wfc.work));
lock(rcu_state.barrier_mutex);
lock((work_completion)(&wfc.work));
lock(cpu_hotplug_lock);
*** DEADLOCK ***
2 locks held by kworker/0:1/9:
#0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500
#1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500
stack backtrace:
CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: events work_for_cpu_fn
Call Trace:
rcu-torture: rcu_torture_read_exit: Start of episode
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x132/0x150
__lock_acquire+0x1538/0x2500
lock_acquire+0xbf/0x2a0
? _cpu_down+0x57/0x2b0
percpu_down_write+0x31/0x200
? _cpu_down+0x57/0x2b0
_cpu_down+0x57/0x2b0
__cpu_down_maps_locked+0x10/0x20
work_for_cpu_fn+0x15/0x20
process_scheduled_works+0x2a7/0x500
worker_thread+0x173/0x330
? __pfx_worker_thread+0x10/0x10
kthread+0xe6/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK
Fix this with providing one lock class key per work_on_cpu() caller.
Reported-and-tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38685e2a0476127db766f81b1c06019ddc4c9ffa ]
If a system has isolated CPUs via the "isolcpus=" command line parameter,
then an attempt to offline the last housekeeping CPU will result in a
WARN_ON() when rebuilding the scheduler domains and a subsequent panic due
to and unhandled empty CPU mas in partition_sched_domains_locked().
cpuset_hotplug_workfn()
rebuild_sched_domains_locked()
ndoms = generate_sched_domains(&doms, &attr);
cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN));
Thus results in an empty CPU mask which triggers the warning and then the
subsequent crash:
WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408
Call trace:
build_sched_domains+0x120c/0x1408
partition_sched_domains_locked+0x234/0x880
rebuild_sched_domains_locked+0x37c/0x798
rebuild_sched_domains+0x30/0x58
cpuset_hotplug_workfn+0x2a8/0x930
Unable to handle kernel paging request at virtual address fffe80027ab37080
partition_sched_domains_locked+0x318/0x880
rebuild_sched_domains_locked+0x37c/0x798
Aside of the resulting crash, it does not make any sense to offline the last
last housekeeping CPU.
Prevent this by masking out the non-housekeeping CPUs when selecting a
target CPU for initiating the CPU unplug operation via the work queue.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/202310171709530660462@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94b3f0b5af2c7af69e3d6e0cdd9b0ea535f22186 ]
The CSD lock seems to get stuck in 2 "modes". When it gets stuck
temporarily, it usually gets released in a few seconds, and sometimes
up to one or two minutes.
If the CSD lock stays stuck for more than several minutes, it never
seems to get unstuck, and gradually more and more things in the system
end up also getting stuck.
In the latter case, we should just give up, so the system can dump out
a little more information about what went wrong, and, with panic_on_oops
and a kdump kernel loaded, dump a whole bunch more information about what
might have gone wrong. In addition, there is an smp.panic_on_ipistall
kernel boot parameter that by default retains the old behavior, but when
set enables the panic after the CSD lock has been stuck for more than
the specified number of milliseconds, as in 300,000 for five minutes.
[ paulmck: Apply Imran Khan feedback. ]
[ paulmck: Apply Leonardo Bras feedback. ]
Link: https://lore.kernel.org/lkml/bc7cc8b0-f587-4451-8bcd-0daae627bcc7@paulmck-laptop/
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a77f38bcd28d3c22ab7dd8eff3f299d43c00411 ]
Acceleration in SRCU happens on enqueue time for each new callback. This
operation is expected not to fail and therefore any similar attempt
from other places shouldn't find any remaining callbacks to accelerate.
Moreover accelerations performed beyond enqueue time are error prone
because rcu_seq_snap() then may return the snapshot for a new grace
period that is not going to be started.
Remove these dangerous and needless accelerations and introduce instead
assertions reporting leaking unaccelerated callbacks beyond enqueue
time.
Co-developed-by: Yong He <alexyonghe@tencent.com>
Signed-off-by: Yong He <alexyonghe@tencent.com>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d3bc4c02d59996d1d3180d8ed409a9d7d5900e0 ]
On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit
high resolution timer that is used as scheduler clock when the kernel
has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB).
The driver initially triggers a reset-to-zero of the two timers but this
reset is only performed on the next rising clock. For the first timer
this is ok - it will be in the next 60ns (16MHz clock). For the chained
second timer this will only happen after the first timer overflows, i.e.
after 2^16 clocks (~4ms with a 16MHz clock). So with other words the
scheduler clock resets to 0 after the first 2^16 clock cycles.
It looks like that the scheduler does not like this and behaves wrongly
over its lifetime, e.g. some tasks are scheduled with a long delay. Why
that is and if there are additional requirements for this behaviour has
not been further analysed.
There is a simple fix for resetting the second timer as well when the
first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in
the Channel Mode register (CMR) of the first timer. This will also rise
the TIOA line (clock input of the second timer) when a software trigger
respective SYNC is issued.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf77bf698887c3b9ebed76dea492b07a3c2c7632 ]
The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the
ARRAY_BOUNDS test kill the calling process when an out-of-bound access
is detected by UBSAN. However, after this [1] commit, UBSAN is triggered
under many new scenarios that weren't detected before, such as in struct
definitions with fixed-size trailing arrays used as flexible arrays. As
a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to
enable except for specific situations.
`make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config
for all selftests, which makes many of them fail because of system hangs
during boot.
This change removes the config option from the lkdtm kselftest and
configures the ARRAY_BOUNDS test to look for UBSAN reports rather than
relying on the calling process being killed.
[1] commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")'
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8d5b7bf6f2105883bbd91bbd4d5b67e4e3dff71 ]
The value of a bitwise expression 1 << (cpu - sdp->mynode->grplo)
is subject to overflow due to a failure to cast operands to a larger
data type before performing the bitwise operation.
The maximum result of this subtraction is defined by the RCU_FANOUT_LEAF
Kconfig option, which on 64-bit systems defaults to 16 (resulting in a
maximum shift of 15), but which can be set up as high as 64 (resulting
in a maximum shift of 63). A value of 31 can result in sign extension,
resulting in 0xffffffff80000000 instead of the desired 0x80000000.
A value of 32 or greater triggers undefined behavior per the C standard.
This bug has not been known to cause issues because almost all kernels
take the default CONFIG_RCU_FANOUT_LEAF=16. Furthermore, as long as a
given compiler gives a deterministic non-zero result for 1<<N for N>=32,
the code correctly invokes all SRCU callbacks, albeit wasting CPU time
along the way.
This commit therefore substitutes the correct 1UL for the buggy 1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54aee5f15b83437f23b2b2469bcf21bdd9823916 ]
When perf-record with a large AUX area, e.g 4GB, it fails with:
#perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
failed to mmap with 12 (Cannot allocate memory)
and it reveals a WARNING with __alloc_pages():
------------[ cut here ]------------
WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248
Call trace:
__alloc_pages+0x1ec/0x248
__kmalloc_large_node+0xc0/0x1f8
__kmalloc_node+0x134/0x1e8
rb_alloc_aux+0xe0/0x298
perf_mmap+0x440/0x660
mmap_region+0x308/0x8a8
do_mmap+0x3c0/0x528
vm_mmap_pgoff+0xf4/0x1b8
ksys_mmap_pgoff+0x18c/0x218
__arm64_sys_mmap+0x38/0x58
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x58/0x188
do_el0_svc+0x34/0x50
el0_svc+0x34/0x108
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a4/0x1a8
'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to
maintains AUX trace pages. The allocated page for this array is physically
contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the
size of pointer array crosses the limitation set by MAX_ORDER, it reveals a
WARNING.
So bail out early with -ENOMEM if the request AUX area is out of bound,
e.g.:
#perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
failed to mmap with 12 (Cannot allocate memory)
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d7ce49f58dc95495b3e22e45d2be7de909b2c63 ]
Enabling CONFIG_KCSAN leads to unconverted, default return thunks to
remain after patching.
As David Kaplan describes in his debugging of the issue, it is caused by
a couple of KCSAN-generated constructors which aren't processed by
objtool:
"When KCSAN is enabled, GCC generates lots of constructor functions
named _sub_I_00099_0 which call __tsan_init and then return. The
returns in these are generally annotated normally by objtool and fixed
up at runtime. But objtool runs on vmlinux.o and vmlinux.o does not
include a couple of object files that are in vmlinux, like
init/version-timestamp.o and .vmlinux.export.o, both of which contain
_sub_I_00099_0 functions. As a result, the returns in these functions
are not annotated, and the panic occurs when we call one of them in
do_ctors and it uses the default return thunk.
This difference can be seen by counting the number of these functions in the object files:
$ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:"
2601
$ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:"
2603
If these functions are only run during kernel boot, there is no
speculation concern."
Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o
so the extra functions don't get generated. KASAN and GCOV are already
disabled for those files.
[ bp: Massage commit message. ]
Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9492261ff2460252cf2d8de89cdf854c7e2b28a0 ]
When we started spreading new inode numbers throughout most of the 64
bit inode space, that triggered some corner case bugs, in particular
some integer overflows related to the radix tree code. Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50564b651d01c19ce732819c5b3c3fd60707188e ]
When marking an extent buffer as dirty, at btrfs_mark_buffer_dirty(),
we check if its generation matches the running transaction and if not we
just print a warning. Such mismatch is an indicator that something really
went wrong and only printing a warning message (and stack trace) is not
enough to prevent a corruption. Allowing a transaction to commit with such
an extent buffer will trigger an error if we ever try to read it from disk
due to a generation mismatch with its parent generation.
So abort the current transaction with -EUCLEAN if we notice a generation
mismatch. For this we need to pass a transaction handle to
btrfs_mark_buffer_dirty() which is always available except in test code,
in which case we can pass NULL since it operates on dummy extent buffers
and all test roots have a single node/leaf (root node at level 0).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bccdd808902f8c677317cec47c306e42b93b849e ]
In some cases running with the test-ww_mutex code, I was seeing
odd behavior where sometimes it seemed flush_workqueue was
returning before all the work threads were finished.
Often this would cause strange crashes as the mutexes would be
freed while they were being used.
Looking at the code, there is a lifetime problem as the
controlling thread that spawns the work allocates the
"struct stress" structures that are passed to the workqueue
threads. Then when the workqueue threads are finished,
they free the stress struct that was passed to them.
Unfortunately the workqueue work_struct node is in the stress
struct. Which means the work_struct is freed before the work
thread returns and while flush_workqueue is waiting.
It seems like a better idea to have the controlling thread
both allocate and free the stress structures, so that we can
be sure we don't corrupt the workqueue by freeing the structure
prematurely.
So this patch reworks the test to do so, and with this change
I no longer see the early flush_workqueue returns.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-3-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e2b06b7b5cb356a987ba3429550c3a89ea89d6 ]
[BUG]
There is a compilation warning reported on commit ae76d8e3e135 ("btrfs:
scrub: fix grouping of read IO"), where gcc (14.0.0 20231022 experimental)
is reporting the following uninitialized variable:
fs/btrfs/scrub.c: In function ‘scrub_simple_mirror.isra’:
fs/btrfs/scrub.c:2075:29: error: ‘found_logical’ may be used uninitialized [-Werror=maybe-uninitialized[https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized]]
2075 | cur_logical = found_logical + BTRFS_STRIPE_LEN;
fs/btrfs/scrub.c:2040:21: note: ‘found_logical’ was declared here
2040 | u64 found_logical;
| ^~~~~~~~~~~~~
[CAUSE]
This is a false alert, as @found_logical is passed as parameter
@found_logical_ret of function queue_scrub_stripe().
As long as queue_scrub_stripe() returned 0, we would update
@found_logical_ret. And if queue_scrub_stripe() returned >0 or <0, the
caller would not utilized @found_logical, thus there should be nothing
wrong.
Although the triggering gcc is still experimental, it looks like the
extra check on "if (found_logical_ret)" can sometimes confuse the
compiler.
Meanwhile the only caller of queue_scrub_stripe() is always passing a
valid pointer, there is no need for such check at all.
[FIX]
Although the report itself is a false alert, we can still make it more
explicit by:
- Replace the check for @found_logical_ret with ASSERT()
- Initialize @found_logical to U64_MAX
- Add one extra ASSERT() to make sure @found_logical got updated
Link: https://lore.kernel.org/linux-btrfs/87fs1x1p93.fsf@gentoo.org/
Fixes: ae76d8e3e135 ("btrfs: scrub: fix grouping of read IO")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dec96fc2dcb59723e041416b8dc53e011b4bfc2e ]
In the tree search v2 ioctl we use the type size_t, which is an unsigned
long, to track the buffer size in the local variable 'buf_size'. An
unsigned long is 32 bits wide on a 32 bits architecture. The buffer size
defined in struct btrfs_ioctl_search_args_v2 is a u64, so when we later
try to copy the local variable 'buf_size' to the argument struct, when
the search returns -EOVERFLOW, we copy only 32 bits which will be a
problem on big endian systems.
Fix this by using a u64 type for the buffer sizes, not only at
btrfs_ioctl_tree_search_v2(), but also everywhere down the call chain
so that we can use the u64 at btrfs_ioctl_tree_search_v2().
Fixes: cc68a8a5a433 ("btrfs: new ioctl TREE_SEARCH_V2")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/ce6f4bd6-9453-4ffe-ba00-cee35495e10f@moroto.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 421b605edb1ce611dee06cf6fd9a1c1f2fd85ad0 upstream.
This reverts commit 84ee19bffc9306128cd0f1c650e89767079efeff.
The commit above made quirks with an OEMID fail to be applied, as they
were checking card->cid.oemid for the full 16 bits defined in MMC_FIXUP
macros but the field would only contain the bottom 8 bits.
eMMC v5.1A might have bogus values in OEMID's higher bits so another fix
will be made, but it has been decided to revert this until that is ready.
Fixes: 84ee19bffc93 ("mmc: core: Capture correct oemid-bits for eMMC cards")
Link: https://lkml.kernel.org/r/ZToJsSLHr8RnuTHz@codewreck.org
Link: https://lkml.kernel.org/r/CAPDyKFqkKibcXnwjnhc3+W1iJBHLeqQ9BpcZrSwhW2u9K2oUtg@mail.gmail.com
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Cc: stable@vger.kernel.org
Cc: Alex Fetters <Alex.Fetters@garmin.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20231103004220.1666641-1-asmadeus@codewreck.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cb4f534bac010258b2688395c2f13459a932be9 upstream.
This reverts commit fb097dcd5a28c0a2325632405c76a66777a6bed9.
After fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver
disables L1"), disabling L1 via pci_disable_link_state(PCIE_LINK_STATE_L1),
then enabling one substate, e.g., L1.1, via sysfs actually enables *all*
the substates.
For example, r8169 disables L1 because of hardware issues on a number of
systems, which implicitly disables the L1.1 and L1.2 substates.
On some systems, L1 and L1.1 work fine, but L1.2 causes missed rx packets.
Enabling L1.1 via the sysfs "aspm_l1_1" attribute unexpectedly enables L1.2
as well as L1.1.
After fb097dcd5a28, pci_disable_link_state(PCIE_LINK_STATE_L1) adds only
ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask:
--- Before fb097dcd5a28
+++ After fb097dcd5a28
# r8169 disables L1:
pci_disable_link_state(PCIE_LINK_STATE_L1)
- disable |= ASPM_L1 | ASPM_L1_1 | ASPM_L1_2 | ... # disable L1, L1.x
+ disable |= ASPM_L1 # disable L1 only
# write "1" to sysfs "aspm_l1_1" attribute:
l1_1_aspm
aspm_attr_store_common(state = ASPM_L1_1)
disable &= ~ASPM_L1_1 # enable L1.1
if (state & (ASPM_L1_1 | ...)) # if enabling any substate
disable &= ~ASPM_L1 # enable L1
# final state:
- disable = ASPM_L1_2 | ... # L1, L1.1 enabled; L1.2 disabled
+ disable = 0 # L1, L1.1, L1.2 all enabled
Enabling an L1.x substate removes the substate and L1 from the
"aspm_disable" mask. After fb097dcd5a28, the substates were not added to
the mask when disabling L1, so enabling one substate implicitly enables all
of them.
Revert fb097dcd5a28 so enabling one substate doesn't enable the others.
Link: https://lore.kernel.org/r/c75931ac-7208-4200-9ca1-821629cf5e28@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[bhelgaas: work through example in commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a565258b3f4bbdc7a3c09cd02082cb286a7bffc upstream.
Three PCI IDs for DF Function 4 were defined but not used.
Add them to the "link" list.
Fixes: f8faf3496633 ("x86/amd_nb: Add AMD PCI IDs for SMN communication")
Fixes: 23a5b8bb022c ("x86/amd_nb: Add PCI ID for family 19h model 78h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230803150430.3542854-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8f9ab2d98116e79d220f1d089df7464ad4e026d upstream.
io_uring does non-blocking connection attempts, which can yield some
unexpected results if a connect request is re-attempted by an an
application. This is equivalent to the following sync syscall sequence:
sock = socket(AF_INET, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
connect(sock, &addr, sizeof(addr);
ret == -1 and errno == EINPROGRESS expected here. Now poll for POLLOUT
on sock, and when that returns, we expect the socket to be connected.
But if we follow that procedure with:
connect(sock, &addr, sizeof(addr));
you'd expect ret == -1 and errno == EISCONN here, but you actually get
ret == 0. If we attempt the connection one more time, then we get EISCON
as expected.
io_uring used to do this, but turns out that bluetooth fails with EBADFD
if you attempt to re-connect. Also looks like EISCONN _could_ occur with
this sequence.
Retain the ->in_progress logic, but work-around a potential EISCONN or
EBADFD error and only in those cases look at the sock_error(). This
should work in general and avoid the odd sequence of a repeated connect
request returning success when the socket is already connected.
This is all a side effect of the socket state being in a CONNECTING
state when we get EINPROGRESS, and only a re-connect or other related
operation will turn that into CONNECTED.
Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/980
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9168ea02b898d3dde98b51e4bd3fb082bd438dab upstream.
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.
A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4a75e9d11001481dca005541b6dc861e1472f03 upstream.
Some userspace pm tests failed are reported by CI:
112 userspace pm add & remove address
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
mptcp_info subflows=1:1 [ ok ]
subflows_total 2:2 [ ok ]
mptcp_info add_addr_signal=1:1 [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
mptcp_info subflows=0:0 [ ok ]
subflows_total 1:1 [fail]
got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens 2 0.0
TcpInSegs 118 0.0
This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The top level events directory dentry does not have a d_fsdata set to a
eventfs_file pointer. This dentry is still passed to eventfs_set_attr().
It can not assume that the d_fsdata is set. Check for that.
Link: https://lore.kernel.org/all/20231112104158.6638-1-milian.wolff@kdab.com/
Fixes: 9aaee3eebc91 ("eventfs: Save ownership and mode")
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f032c53bea6d2057c14553832d846be2f151cfb2 ]
The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.
int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
const char *name, const char *loc, ...)
Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/
Fixes: 2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5035c81847430dfa3482807b07325f29e9e8c09 ]
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0d9da19d7de9e845e7a93a901c4b9658df6b492 ]
Dell new platform support dual speaker. But BIOS verb table only show one speaker.
It will fill verb table for second speaker. Then bind with CS AMP model.
Fixes: de90f5165b1c ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4dd390a77bf742b8a518ac2deee00b0f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aba6ab57a910ad4b940c2024d15f2cdbf5b7f76b ]
I've re-written the error handling but the bug is that if init_imstt()
fails we need to call iounmap(par->cmap_regs).
Fixes: c75f5a550610 ("fbdev: imsttfb: Fix use after free bug in imsttfb_probe")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e08c30efda21ef4c0ec084a3a9581c220b442ba9 ]
The init_imstt() function calls framebuffer_release() on error and then
the probe() function calls it again. It should only be done in probe.
Fixes: 518ecb6a209f ("fbdev: imsttfb: Fix error path of imsttfb_probe()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 403edfa436286b21f5ffe6856ae5b36396e8966c ]
The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.
Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.
Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2ded280a4b1b7bd93e53670528504be08d24967 ]
Zynq QSPI driver has been converted to use spi-mem framework so
add spi-mem to driver kconfig dependencies.
Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1699037031-702858-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bdcbc31ad2112385ad525b28972c45015e6ad70 ]
The name currently used to get the clock includes the dapm prefix.
It should use the name as provided to the widget, without the prefix.
Fixes: 3caac759681e ("ASoC: soc-dapm.c: fixup snd_soc_dapm_new_control_unlocked() error handling")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106103712.703962-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15be353d55f9e12e34f9a819f51eb41fdef5eda8 ]
The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.
The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.
Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 004fc58edea6f00db9ad07b40b882e8d976f7a54 ]
Property 'playback-codecs' is referenced as 'speaker-codec' in the error
message, and this can lead to confusion.
Correct the error message such that the correct property name is
referenced.
Fixes: 0da16e370dd7 ("ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and rt5682s")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231031103139.77395-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
