IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 0b548e33e6cb2bff240fdaf1783783be15c29080 upstream.
Fengguang reported soft lockups while running the rbtree and interval
tree test modules. The logic for these tests all occur in init phase,
and we currently are pounding with the default values for number of
nodes and number of iterations of each test. Reduce the latter by two
orders of magnitude. This does not influence the value of the tests in
that one thousand times by default is enough to get the picture.
Link: http://lkml.kernel.org/r/20171109161715.xai2dtwqw2frhkcm@linux-n805
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c14376de3a1befa70d9811ca2872d47367b48767 ]
wake_klogd is a local variable in console_unlock(). The information
is lost when the console_lock owner using the busy wait added by
the commit dbdda842fe96f8932 ("printk: Add console owner and waiter
logic to load balance console writes"). The following race is
possible:
CPU0 CPU1
console_unlock()
for (;;)
/* calling console for last message */
printk()
log_store()
log_next_seq++;
/* see new message */
if (seen_seq != log_next_seq) {
wake_klogd = true;
seen_seq = log_next_seq;
}
console_lock_spinning_enable();
if (console_trylock_spinning())
/* spinning */
if (console_lock_spinning_disable_and_check()) {
printk_safe_exit_irqrestore(flags);
return;
console_unlock()
if (seen_seq != log_next_seq) {
/* already seen */
/* nothing to do */
Result: Nobody would wakeup klogd.
One solution would be to make a global variable from wake_klogd.
But then we would need to manipulate it under a lock or so.
This patch wakes klogd also when console_lock is passed to the
spinning waiter. It looks like the right way to go. Also userspace
should have a chance to see and store any "flood" of messages.
Note that the very late klogd wake up was a historic solution.
It made sense on single CPU systems or when sys_syslog() operations
were synchronized using the big kernel lock like in v2.1.113.
But it is questionable these days.
Fixes: dbdda842fe96f8932 ("printk: Add console owner and waiter logic to load balance console writes")
Link: http://lkml.kernel.org/r/20180226155734.dzwg3aovqnwtvkoy@pathway.suse.cz
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5f7cde1b85d4c8e09ca46ce948e008a2377f64 ]
This patch, basically, reverts commit 6b97a20d3a79 ("printk:
set may_schedule for some of console_trylock() callers").
That commit was a mistake, it introduced a big dependency
on the scheduler, by enabling preemption under console_sem
in printk()->console_unlock() path, which is rather too
critical. The patch did not significantly reduce the
possibilities of printk() lockups, but made it possible to
stall printk(), as has been reported by Tetsuo Handa [1].
Another issues is that preemption under console_sem also
messes up with Steven Rostedt's hand off scheme, by making
it possible to sleep with console_sem both in console_unlock()
and in vprintk_emit(), after acquiring the console_sem
ownership (anywhere between printk_safe_exit_irqrestore() in
console_trylock_spinning() and printk_safe_enter_irqsave()
in console_unlock()). This makes hand off less likely and,
at the same time, may result in a significant amount of
pending logbuf messages. Preempted console_sem owner makes
it impossible for other CPUs to emit logbuf messages, but
does not make it impossible for other CPUs to append new
messages to the logbuf.
Reinstate the old behavior and make printk() non-preemptible.
Should any printk() lockup reports arrive they must be handled
in a different way.
[1] http://lkml.kernel.org/r/201603022101.CAH73907.OVOOMFHFFtQJSL%20()%20I-love%20!%20SAKURA%20!%20ne%20!%20jp
Fixes: 6b97a20d3a79 ("printk: set may_schedule for some of console_trylock() callers")
Link: http://lkml.kernel.org/r/20180116044716.GE6607@jagdpanzerIV
To: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c162d5b4338d72deed61aa65ed0f2f4ba2bbc8ab ]
The commit ("printk: Add console owner and waiter logic to load balance
console writes") made vprintk_emit() and console_unlock() even more
complicated.
This patch extracts the new code into 3 helper functions. They should
help to keep it rather self-contained. It will be easier to use and
maintain.
This patch just shuffles the existing code. It does not change
the functionality.
Link: http://lkml.kernel.org/r/20180112160837.GD24497@linux.suse
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: rostedt@home.goodmis.org
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbdda842fe96f8932bae554f0adf463c27c42bc7 ]
This patch implements what I discussed in Kernel Summit. I added
lockdep annotation (hopefully correctly), and it hasn't had any splats
(since I fixed some bugs in the first iterations). It did catch
problems when I had the owner covering too much. But now that the owner
is only set when actively calling the consoles, lockdep has stayed
quiet.
Here's the design again:
I added a "console_owner" which is set to a task that is actively
writing to the consoles. It is *not* the same as the owner of the
console_lock. It is only set when doing the calls to the console
functions. It is protected by a console_owner_lock which is a raw spin
lock.
There is a console_waiter. This is set when there is an active console
owner that is not current, and waiter is not set. This too is protected
by console_owner_lock.
In printk() when it tries to write to the consoles, we have:
if (console_trylock())
console_unlock();
Now I added an else, which will check if there is an active owner, and
no current waiter. If that is the case, then console_waiter is set, and
the task goes into a spin until it is no longer set.
When the active console owner finishes writing the current message to
the consoles, it grabs the console_owner_lock and sees if there is a
waiter, and clears console_owner.
If there is a waiter, then it breaks out of the loop, clears the waiter
flag (because that will release the waiter from its spin), and exits.
Note, it does *not* release the console semaphore. Because it is a
semaphore, there is no owner. Another task may release it. This means
that the waiter is guaranteed to be the new console owner! Which it
becomes.
Then the waiter calls console_unlock() and continues to write to the
consoles.
If another task comes along and does a printk() it too can become the
new waiter, and we wash rinse and repeat!
By Petr Mladek about possible new deadlocks:
The thing is that we move console_sem only to printk() call
that normally calls console_unlock() as well. It means that
the transferred owner should not bring new type of dependencies.
As Steven said somewhere: "If there is a deadlock, it was
there even before."
We could look at it from this side. The possible deadlock would
look like:
CPU0 CPU1
console_unlock()
console_owner = current;
spin_lockA()
printk()
spin = true;
while (...)
call_console_drivers()
spin_lockA()
This would be a deadlock. CPU0 would wait for the lock A.
While CPU1 would own the lockA and would wait for CPU0
to finish calling the console drivers and pass the console_sem
owner.
But if the above is true than the following scenario was
already possible before:
CPU0
spin_lockA()
printk()
console_unlock()
call_console_drivers()
spin_lockA()
By other words, this deadlock was there even before. Such
deadlocks are prevented by using printk_deferred() in
the sections guarded by the lock A.
By Steven Rostedt:
To demonstrate the issue, this module has been shown to lock up a
system with 4 CPUs and a slow console (like a serial console). It is
also able to lock up a 8 CPU system with only a fast (VGA) console, by
passing in "loops=100". The changes in this commit prevent this module
from locking up the system.
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/hrtimer.h>
static bool stop_testing;
static unsigned int loops = 1;
static void preempt_printk_workfn(struct work_struct *work)
{
int i;
while (!READ_ONCE(stop_testing)) {
for (i = 0; i < loops && !READ_ONCE(stop_testing); i++) {
preempt_disable();
pr_emerg("%5d%-75s\n", smp_processor_id(),
" XXX NOPREEMPT");
preempt_enable();
}
msleep(1);
}
}
static struct work_struct __percpu *works;
static void finish(void)
{
int cpu;
WRITE_ONCE(stop_testing, true);
for_each_online_cpu(cpu)
flush_work(per_cpu_ptr(works, cpu));
free_percpu(works);
}
static int __init test_init(void)
{
int cpu;
works = alloc_percpu(struct work_struct);
if (!works)
return -ENOMEM;
/*
* This is just a test module. This will break if you
* do any CPU hot plugging between loading and
* unloading the module.
*/
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
INIT_WORK(work, &preempt_printk_workfn);
schedule_work_on(cpu, work);
}
return 0;
}
static void __exit test_exit(void)
{
finish();
}
module_param(loops, uint, 0);
module_init(test_init);
module_exit(test_exit);
MODULE_LICENSE("GPL");
Link: http://lkml.kernel.org/r/20180110132418.7080-2-pmladek@suse.com
Cc: akpm@linux-foundation.org
Cc: linux-mm@kvack.org
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[pmladek@suse.com: Commit message about possible deadlocks]
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit c9b8d580b3fb0ab65d37c372aef19a318fda3199.
This is just a technical revert to make the printk fix apply cleanly,
this patch will be re-picked in about 3 commits.
[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]
ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed. However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug. Move the put operation later.
Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.
fill_pool
kmemleak_ignore
make_black_object
put_object
__call_rcu (kernel/rcu/tree.c)
debug_rcu_head_queue
debug_object_activate
debug_object_init
fill_pool
kmemleak_ignore
make_black_object
...
So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.
Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]
hfs_bmap_free() frees node via hfs_bnode_put(node). However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug. This patch frees node only when it is
never used.
Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug. This patch frees the node only when
it is never again used.
Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com>
Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally. This is correct in the normal
case, while not exact in hot-plug situation.
This function is used in two places:
* free_area_init_core()
* move_pfn_range_to_zone()
In the first case, we are sure zone index increase monotonically. While
in the second one, this is under users control.
One way to reproduce this is:
----------------------------
1. create a virtual machine with empty node1
-m 4G,slots=32,maxmem=32G \
-smp 4,maxcpus=8 \
-numa node,nodeid=0,mem=4G,cpus=0-3 \
-numa node,nodeid=1,mem=0G,cpus=4-7
2. hot-add cpu 3-7
cpu-add [3-7]
2. hot-add memory to nod1
object_add memory-backend-ram,id=ram0,size=1G
device_add pc-dimm,id=dimm0,memdev=ram0,node=1
3. online memory with following order
echo online_movable > memory47/state
echo online > memory40/state
After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).
Michal said:
"Having an incorrect nr_zones might result in all sorts of problems
which would be quite hard to debug (e.g. reclaim not considering the
movable zone). I do not expect many users would suffer from this it
but still this is trivial and obviously right thing to do so
backporting to the stable tree shouldn't be harmful (last famous
words)"
Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]
ocfs2_defrag_extent may fall into deadlock.
ocfs2_ioctl_move_extents
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
ocfs2_lock_allocators_move_extents
ocfs2_reserve_clusters
inode_lock GLOBAL_BITMAP_SYSTEM_INODE
__ocfs2_flush_truncate_log
inode_lock GLOBAL_BITMAP_SYSTEM_INODE
As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock
against the global bitmap if local allocator has not sufficient cluters.
Once global bitmap could meet the demand, ocfs2_reserve_cluster will
return success with global bitmap locked.
After ocfs2_reserve_cluster(), if truncate log is full,
__ocfs2_flush_truncate_log() will definitely fall into deadlock because
it needs to inode_lock global bitmap, which has already been locked.
To fix this bug, we could remove from
ocfs2_lock_allocators_move_extents() the code which intends to lock
global allocator, and put the removed code after
__ocfs2_flush_truncate_log().
ocfs2_lock_allocators_move_extents() is referred by 2 places, one is
here, the other does not need the data allocator context, which means
this patch does not affect the caller so far.
Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ]
Running the Clang static analyzer on IORT code detected the following
error:
Logic error: Branch condition evaluates to a garbage value
in
iort_get_platform_device_domain()
If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.
Initialize the msi_parent pointer, fixing the bug.
Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]
nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.
Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31ffa563833576bd49a8bf53120568312755e6e2 ]
Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]
It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().
At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.
When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared. This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared
There is some uncertainty in this analysis, but it seems to be fit the
observations. Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.
Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.
The backtrace for the blocked process looked like:
PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh"
#0 [ffff881ff43efbf8] schedule at ffffffff815e56f1
#1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed
#2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8
#3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e
#4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache]
#5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache]
#6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs]
#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs]
#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73
#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs]
#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756
#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa
#12 [ffff881ff43eff18] sys_read at ffffffff811fda62
#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]
The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db3321 ("pstore: Convert console
write to use ->write_buf")
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.
That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.
The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]
Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.
This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ]
The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <jelsasser@appneta.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]
This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a24ce5b66f9c8190d63b15f4473600db4935f1f ]
[Description]
In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend. This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time. This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree. During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.
[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.
[dhowells: Note that I've removed the clearance and put of newpage as
they aren't attested in the commit message and don't appear to actually
achieve anything since a new page is only allocated is newpage!=NULL and
any residual new page is cleared before returning.]
[Testing]
I have tested the fix using following method for 12+ hrs.
1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
(while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
..
..
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
free -h , cat /proc/meminfo and page-types -r -b lru
to ensure all pages are freed.
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9287fa657b3328b4549c0ab39ea7f197a3d6a50 ]
list_for_each_entry_safe() is not safe for deleting entries from the
list if the spin lock, which protects it, is released and reacquired during
the list iteration. Fix this issue by replacing this construction with
a simple check if list is empty and removing the first entry in each
iteration. This is almost equivalent to a revert of the commit mentioned in
the Fixes: tag.
This patch fixes following issue:
--->8---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events eth_work
PC is at rx_fill+0x60/0xac
LR is at _raw_spin_lock_irqsave+0x50/0x5c
pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093
sp : ee7fbee8 ip : 00000100 fp : 00000000
r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0
r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00
r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 6d5dc04a DAC: 00000051
Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval))
Stack: (0xee7fbee8 to 0xee7fc000)
...
[<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738)
[<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8)
[<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164)
[<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee7fbfb0 to 0xee7fbff8)
...
---[ end trace 64480bc835eba7d6 ]---
Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e4329ee2c52692ea42cc677fb2133519718b34a ]
The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:
arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]
We get the following warnings about empty statements when building
with 'W=1':
arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ]
Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.
The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.
Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]
When ip6_route_me_harder is invoked, it resets outgoing interface of:
- link-local scoped packets sent by neighbor discovery
- multicast packets sent by MLD host
- multicast packets send by MLD proxy daemon that sets outgoing
interface through IPV6_PKTINFO ipi6_ifindex
Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]
This essential mode for PAL users is missing, so add it.
Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]
Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align
transfer size") started aligning transfer size only if requested,
breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore
the old behaviour.
Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c2322fbcab8102b8cadc09d66714700a2da42c2 ]
On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]
On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]
We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.
Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.
The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]
The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]
ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.
Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.
As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:
unregister_netdevice: waiting for br0 to become free. Usage count = 3
To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.
Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.
Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]
The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.
Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]
We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]
We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]
The latency number is in usec for the pm_qos. Correct the calculation to
give us the time in usec
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]
rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.
Fix the signature so we are not calling a function pointer with a
mismatched signature.
Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 074fca3a18e7e1e0d4d7dcc9d7badc43b90232f4 ]
Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.
Without this patch krping doesn't work on CX-5 devices and throws
following error:
The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32
Fixed the logic to set the correct fence type.
Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]
When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().
An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.
Parent snapshot:
.
|--- 261/
|--- 271/
|--- 266/
|--- 259/
|--- 260/
| |--- 267
|
|--- 264/
| |--- 258/
| |--- 257/
|
|--- 265/
|--- 268/
|--- 269/
| |--- 262/
|
|--- 270/
|--- 272/
| |--- 263/
| |--- 275/
|
|--- 274/
|--- 273/
Send snapshot:
.
|-- 275/
|-- 274/
|-- 273/
|-- 262/
|-- 269/
|-- 258/
|-- 271/
|-- 268/
|-- 267/
|-- 270/
|-- 259/
| |-- 265/
|
|-- 272/
|-- 257/
|-- 260/
|-- 264/
|-- 263/
|-- 261/
|-- 266/
When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.
When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:
1) We issue the move operation for inode 274;
2) Because inode 262 depended on the move operation of inode 274 (it was
delayed because 274 is its ancestor in the send snapshot), we issue the
move operation for inode 262;
3) We issue the move operation for inode 272, because it was delayed by
inode 274 too (ancestor of 272 in the send snapshot);
4) We issue the move operation for inode 269 (it was delayed by 262);
5) We issue the move operation for inode 257 (it was delayed by 272);
6) We issue the move operation for inode 260 (it was delayed by 272);
7) We issue the move operation for inode 258 (it was delayed by 269);
8) We issue the move operation for inode 264 (it was delayed by 257);
9) We issue the move operation for inode 271 (it was delayed by 258);
10) We issue the move operation for inode 263 (it was delayed by 264);
11) We issue the move operation for inode 268 (it was delayed by 271);
12) We verify if we can issue the move operation for inode 270 (it was
delayed by 271). We detect a path loop in the current state, because
inode 267 needs to be moved first before we can issue the move
operation for inode 270. So we delay again the move operation for
inode 270, this time we will attempt to do it after inode 267 is
moved;
13) We issue the move operation for inode 261 (it was delayed by 263);
14) We verify if we can issue the move operation for inode 266 (it was
delayed by 263). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12);
15) We issue the move operation for inode 267 (it was delayed by 268);
16) We verify if we can issue the move operation for inode 266 (it was
delayed by 270). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12). So here we added
again the same delayed move operation that we added in step 14;
17) We attempt again to see if we can issue the move operation for inode
266, and as in step 16, we realize we can not due to a path loop in
the current state due to a dependency on inode 270. Again we delay
inode's 266 rename to happen after inode's 270 move operation, adding
the same dependency to the empty stack that we did in steps 14 and 16.
The next iteration will pick the same move dependency on the stack
(the only entry) and realize again there is still a path loop and then
again the same dependency to the stack, over and over, resulting in
an infinite loop.
So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.
A test case for fstests, with this reproducer, follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 ]
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.
Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.
Fix the device tree, and the performance of Flash access is improved.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]
Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name(). In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table(). The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.
Fix by copying the search string instead of modifying it in place.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ]
If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
