IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently, when a scalar bounded register is spilled to the stack, its
ID is preserved, but only if was already assigned, i.e. if this register
was MOVed before.
Assign an ID on spill if none is set, so that equal scalars could be
tracked if a register is spilled to the stack and filled into another
register.
One test is adjusted to reflect the change in register IDs.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-9-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Put calculation of the register value width into a dedicated function.
This function will also be used in a following commit.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Link: https://lore.kernel.org/r/20240108205209.838365-8-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract the common code that generates a register ID for src_reg before
MOV if needed into a new function. This function will also be used in
a following commit.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-7-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a range check is performed on a register that was 32-bit spilled to
the stack, the IDs of the two instances of the register are the same, so
the range should also be the same.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-6-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust the check in bpf_get_spilled_reg to take into account spilled
registers narrower than 64 bits. That allows find_equal_scalars to
properly adjust the range of all spilled registers that have the same
ID. Before this change, it was possible for a register and a spilled
register to have the same IDs but different ranges if the spill was
narrower than 64 bits and a range check was performed on the register.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-5-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that infinite loop detection logic separates states with
identical register states but different imprecise scalars spilled to
stack.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-4-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current infinite loops detection mechanism is speculative:
- first, states_maybe_looping() check is done which simply does memcmp
for R1-R10 in current frame;
- second, states_equal(..., exact=false) is called. With exact=false
states_equal() would compare scalars for equality only if in old
state scalar has precision mark.
Such logic might be problematic if compiler makes some unlucky stack
spill/fill decisions. An artificial example of a false positive looks
as follows:
r0 = ... unknown scalar ...
r0 &= 0xff;
*(u64 *)(r10 - 8) = r0;
r0 = 0;
loop:
r0 = *(u64 *)(r10 - 8);
if r0 > 10 goto exit_;
r0 += 1;
*(u64 *)(r10 - 8) = r0;
r0 = 0;
goto loop;
This commit updates call to states_equal to use exact=true, forcing
all scalar comparisons to be exact.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-3-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The u64_offset_to_skb_data test is supposed to make a 64-bit fill, but
instead makes a 16-bit one. Fix the test according to its intention and
update the comments accordingly (umax is no longer 0xffff). The 16-bit
fill is covered by u16_offset_to_skb_data.
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240108205209.838365-2-maxtram95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reviews.llvm.org was LLVM's Phabricator instances for code review. It
has been abandoned in favor of GitHub pull requests. While the majority
of links in the kernel sources still work because of the work Fangrui
has done turning the dynamic Phabricator instance into a static archive,
there are some issues with that work, so preemptively convert all the
links in the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in
the commit message itself so there should not be any loss of fidelity in
the relevant information.
Additionally, fix a typo in the xdpwall.c print ("LLMV" -> "LLVM") while
in the area.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240111-bpf-update-llvm-phabricator-links-v2-1-9a7ae976bd64@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Various tests specify extra testing prog_flags when loading BPF
programs, like BPF_F_TEST_RND_HI32, and more recently also
BPF_F_TEST_REG_INVARIANTS. While BPF_F_TEST_RND_HI32 is old enough to
not cause much problem on older kernels, BPF_F_TEST_REG_INVARIANTS is
very fresh and unconditionally specifying it causes selftests to fail on
even slightly outdated kernels.
This breaks libbpf CI test against 4.9 and 5.15 kernels, it can break
some local development (done outside of VM), etc.
To prevent this, and guard against similar problems in the future, do
runtime detection of supported "testing flags", and only provide those
that host kernel recognizes.
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240109231738.575844-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The discussion of what the actual conformance groups should be
is still in progress, so this is just part 1 which only uses
"legacy" for deprecated instructions and "basic" for everything
else. Subsequent patches will add more groups as discussion
continues.
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240108214231.5280-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to iterate multiple decl_tag types pointed to the same
function argument. Use this to support multiple __arg_xxx tags per
global subprog argument.
We leave btf_find_decl_tag_value() intact, but change its implementation
to use a new btf_find_next_decl_tag() which can be straightforwardly
used to find next BTF type ID of a matching btf_decl_tag type.
btf_prepare_func_args() is switched from btf_find_decl_tag_value() to
btf_find_next_decl_tag() to gain multiple tags per argument support.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add btf_arg_tag flags enum to be able to record multiple tags per
argument. Also streamline pointer argument processing some more.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move scalar arg processing in btf_prepare_func_args() after all pointer
arg processing is done. This makes it easier to do validation. One
example of unintended behavior right now is ability to specify
__arg_nonnull for integer/enum arguments. This patch fixes this.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Seeing:
process_subtest:PASS:Can't alloc specs array 0 nsec
... in verbose successful test log is very confusing. Use smaller
identifier-like test tag to denote that we are asserting specs array
allocation success.
Now it's much less distracting:
process_subtest:PASS:specs_alloc 0 nsec
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105000909.2818934-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Hou Tao says:
====================
The motivation of inlining bpf_kptr_xchg() comes from the performance
profiling of bpf memory allocator benchmark [1]. The benchmark uses
bpf_kptr_xchg() to stash the allocated objects and to pop the stashed
objects for free. After inling bpf_kptr_xchg(), the performance for
object free on 8-CPUs VM increases about 2%~10%. However the performance
gain comes with costs: both the kasan and kcsan checks on the pointer
will be unavailable. Initially the inline is implemented in do_jit() for
x86-64 directly, but I think it will more portable to implement the
inline in verifier.
Patch #1 supports inlining bpf_kptr_xchg() helper and enables it on
x86-4. Patch #2 factors out a helper for newly-added test in patch #3.
Patch #3 tests whether the inlining of bpf_kptr_xchg() is expected.
Please see individual patches for more details. And comments are always
welcome.
Change Log:
v3:
* rebased on bpf-next tree
* patch 1 & 2: Add Rvb-by and Ack-by tags from Eduard
* patch 3: use inline assembly and naked function instead of c code
(suggested by Eduard)
v2: https://lore.kernel.org/bpf/20231223104042.1432300-1-houtao@huaweicloud.com/
* rebased on bpf-next tree
* drop patch #1 in v1 due to discussion in [2]
* patch #1: add the motivation in the commit message, merge patch #1
and #3 into the new patch in v2. (Daniel)
* patch #2/#3: newly-added patch to test the inlining of
bpf_kptr_xchg() (Eduard)
v1: https://lore.kernel.org/bpf/95b8c2cd-44d5-5fe1-60b5-7e8218779566@huaweicloud.com/
[1]: https://lore.kernel.org/bpf/20231221141501.3588586-1-houtao@huaweicloud.com/
[2]: https://lore.kernel.org/bpf/fd94efb9-4a56-c982-dc2e-c66be5202cb7@huaweicloud.com/
====================
Link: https://lore.kernel.org/r/20240105104819.3916743-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test uses bpf_prog_get_info_by_fd() to obtain the xlated
instructions of the program first. Since these instructions have
already been rewritten by the verifier, the tests then checks whether
the rewritten instructions are as expected. And to ensure LLVM generates
code exactly as expected, use inline assembly and a naked function.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both test_verifier and test_progs use get_xlated_program(), so moving
the helper into testing_helpers.h to reuse it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The motivation of inlining bpf_kptr_xchg() comes from the performance
profiling of bpf memory allocator benchmark. The benchmark uses
bpf_kptr_xchg() to stash the allocated objects and to pop the stashed
objects for free. After inling bpf_kptr_xchg(), the performance for
object free on 8-CPUs VM increases about 2%~10%. The inline also has
downside: both the kasan and kcsan checks on the pointer will be
unavailable.
bpf_kptr_xchg() can be inlined by converting the calling of
bpf_kptr_xchg() into an atomic_xchg() instruction. But the conversion
depends on two conditions:
1) JIT backend supports atomic_xchg() on pointer-sized word
2) For the specific arch, the implementation of xchg is the same as
atomic_xchg() on pointer-sized words.
It seems most 64-bit JIT backends satisfies these two conditions. But
as a precaution, defining a weak function bpf_jit_supports_ptr_xchg()
to state whether such conversion is safe and only supporting inline for
64-bit host.
For x86-64, it supports BPF_XCHG atomic operation and both xchg() and
atomic_xchg() use arch_xchg() to implement the exchange, so enabling the
inline of bpf_kptr_xchg() on x86-64 first.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240105104819.3916743-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eric Dumazet says:
====================
inet_diag: remove three mutexes in diag dumps
Surprisingly, inet_diag operations are serialized over a stack
of three mutexes, giving legacy /proc based files an unfair
advantage on modern hosts.
This series removes all of them, making inet_diag operations
(eg iproute2/ss) fully parallel.
1-2) Two first patches are adding data-race annotations
and can be backported to stable kernels.
3-4) inet_diag_table_mutex can be replaced with RCU protection,
if we add corresponding protection against module unload.
5-7) sock_diag_table_mutex can be replaced with RCU protection,
if we add corresponding protection against module unload.
8) sock_diag_mutex is removed, as the old bug it was
working around has been fixed more elegantly.
9) inet_diag_dump_icsk() can skip over empty buckets to reduce
spinlock contention.
====================
Link: https://lore.kernel.org/r/20240122112603.3270097-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the removal of inet_diag_table_mutex, sock_diag_table_mutex
and sock_diag_mutex, I was able so see spinlock contention from
inet_diag_dump_icsk() when running 100 parallel invocations.
It is time to skip over empty buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sock_diag_rcv() is still serializing its operations using
a mutex, for no good reason.
This came with commit 0a9c730144 ("[INET_DIAG]: Fix oops
in netlink_rcv_skb"), but the root cause has been fixed
with commit cd40b7d398 ("[NET]: make netlink user -> kernel
interface synchronious")
Remove this mutex to let multiple threads run concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TCPDIAG_GETSOCK and DCCPDIAG_GETSOCK diag are serialized
on sock_diag_table_mutex.
This is to make sure inet_diag module is not unloaded
while diag was ongoing.
It is time to get rid of this mutex and use RCU protection,
allowing full parallelism.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sock_diag_broadcast_destroy_work() and __sock_diag_cmd()
are currently using sock_diag_table_mutex to protect
against concurrent sock_diag_handlers[] changes.
This makes inet_diag dump serialized, thus less scalable
than legacy /proc files.
It is time to switch to full RCU protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following patch is going to use RCU instead of
sock_diag_table_mutex acquisition.
This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
inet_diag_lock_handler() current implementation uses a mutex
to protect inet_diag_table[] array against concurrent changes.
This makes inet_diag dump serialized, thus less scalable
than legacy /proc files.
It is time to switch to full RCU protection.
As a bonus, if a target is statically linked instead of being
modular, inet_diag_lock_handler() & inet_diag_unlock_handler()
reduce to reads only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following patch is going to use RCU instead of
inet_diag_table_mutex acquisition.
This patch is a preparation, no change of behavior yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__sock_diag_cmd() and sock_diag_bind() read sock_diag_handlers[family]
without a lock held.
Use READ_ONCE()/WRITE_ONCE() annotations to avoid potential issues.
Fixes: 8ef874bfc7 ("sock_diag: Move the sock_ code to net/core/")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output
buffer is too small
- bpf: reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets,
avoid infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YhQQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
(controllers set the flag, but there is no client to use it). Also,
CLASS_SPD support gets simplified to prepare removal in the future.
Class based instantiation is not recommended these days anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it. Then, there are also
quite some driver updates. Standing out are patches for the wmt-driver
which is refactored to support more variants. This is the rebased pull
request where a large series for the designware driver was dropped.
-----BEGIN PGP SIGNATURE-----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=8D3Q
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
Subsytem:
New driver:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support
-----BEGIN PGP SIGNATURE-----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=7u4i
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are three new drivers this cycle. Also the cmos driver is
getting fixes for longstanding wakeup issues on AMD.
New drivers:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support"
* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
rtc: da9063: Use dev_err_probe()
rtc: da9063: Use device_get_match_data()
rtc: da9063: Make IRQ as optional
rtc: max31335: Fix comparison in max31335_volatile_reg()
rtc: max31335: use regmap_update_bits_check
rtc: max31335: remove unecessary locking
rtc: max31335: add driver support
dt-bindings: rtc: max31335: add max31335 bindings
rtc: rv8803: add wakeup-source support
rtc: ac100: remove misuses of kernel-doc
rtc: class: Remove usage of the deprecated ida_simple_xx() API
rtc: MAINTAINERS: drop Alessandro Zummo
rtc: ma35d1: remove hardcoded UIE support
dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
rtc: rv8803: Add power management support
rtc: ds3232: avoid unused-const-variable warning
rtc: lpc24xx: add missing dependency
rtc: tps6594: Add driver for TPS6594 RTC
rtc: Add driver for Nuvoton ma35d1 rtc controller
...
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZalqoQAKCRBAj56VGEWX
nOqHAP4u4b/r4w2aeULy3kpESgbUQ1vXpFUus/6AHTw1FAtbsgD/XxV3ZWKZ0H8J
VfZ81yXvT3WstJM7p7YNP0GGXJ/HRQg=
=l0Z8
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: atkbd - use ab83 as id when skipping the getid command
Input: driver for Adafruit Seesaw Gamepad
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: da9063_onkey - avoid explicitly setting input's parent
Input: da9063_onkey - avoid using OF-specific APIs
Input: iqs269a - add support for OTP variants
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Input: zforce_ts - accept standard touchscreen properties
dt-bindings: touchscreen: neonode,zforce: Use standard properties
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: input: convert drv266x to json-schema
Input: da9063 - use dev_err_probe()
Input: da9063 - drop redundant prints in probe()
Input: da9063 - simplify obtaining OF match data
Input: as5011 - convert to GPIO descriptor
Input: omap-keypad - drop optional GPIO support
Input: tca6416-keypad - drop unused include
...
- Core: add concept of controller_id to deal with clear Controller/Manager
hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master id
-----BEGIN PGP SIGNATURE-----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=N74M
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
- revert the changes aiming to use a read-write semaphore to protect the
list of GPIO devices due to calls to legacy API taking that lock from
atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523
-----BEGIN PGP SIGNATURE-----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=g2QY
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from some regular driver fixes there's a relatively big revert
of the locking changes that were introduced to GPIOLIB in this merge
window.
This is because it turned out that some legacy GPIO interfaces - that
need to translate a number from the global GPIO numberspace to the
address of the relevant descriptor, thus running a GPIO device lookup
and taking the GPIO device list lock - are still used in old code from
atomic context resulting in "scheduling while atomic" errors.
I'll try to make the read-only part of the list access entirely
lockless using SRCU but this will take some time so let's go back to
the old global spinlock for now.
Summary:
- revert the changes aiming to use a read-write semaphore to protect
the list of GPIO devices due to calls to legacy API taking that
lock from atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523"
* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: revert the attempt to protect the GPIO device list with an rwsem
gpio: EN7523: fix kernel-doc warnings
gpiolib: Fix scope-based gpio_device refcounting
gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
dt-bindings: gpio: xilinx: Fix node address in gpio
gpio: rtd: Fix signedness bug in probe
The first commit fixes a duplicate cleanup in an error path introduced
in pwm/for-6.8-rc1~13.
The second cares for an out-of-bounds access. In practise it doesn't
happen---otherwise someone would have noticed since v5.17-rc1 I
guess---because the device tree binding for the two drivers using
of_pwm_single_xlate() only have args->args_count == 1. A device-tree
that doesn't conform to the respective bindings could trigger that
easily however.
The third and last one corrects the request callback of the jz4740 pwm
driver which used dev_err_probe() long after .probe() completed. This is
conceptually wrong because dev_err_probe() might call
device_set_deferred_probe_reason() which is nonsensical after the driver
is bound.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmWo3dwACgkQj4D7WH0S
/k5L3Qf8Db1uwUEGFXjjMIS82djW6u8rAEu1bEVf0yqhFKB3zo/PO4b1bfTHvKGo
SwSflvZ2UB+bcby1yIZTP1yUbDH1O3WFfxgYwdUR715us/iMCV5sYvuNagi0Fp8O
edR1Ntr/CmaU5VeDyml7ZUIHj7oZ50hd1dvvEugvKQKEVvW8yHBR2OEuqI38cIyK
ItsQPrN9ld7PXzE0UFWMJpi3lbo+Q4KEYbx0yzBmBGogLXi+nRCIGtMB5KzdUSvf
K4mQPHDmUyHsviXyjXcywst7sL1ebUcI3FicvCf4by/Sek5jZQGtLoyRS0m4FkRw
V/TQMiLhU5iKr84wPQUvw6ZYmcXxog==
=BP0a
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.8-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
- fix a duplicate cleanup in an error path introduced in
this merge window
- fix an out-of-bounds access
In practise it doesn't happen - otherwise someone would have noticed
since v5.17-rc1 I guess - because the device tree binding for the two
drivers using of_pwm_single_xlate() only have args->args_count == 1.
A device-tree that doesn't conform to the respective bindings could
trigger that easily however.
- correct the request callback of the jz4740 pwm driver which used
dev_err_probe() long after .probe() completed.
This is conceptually wrong because dev_err_probe() might call
device_set_deferred_probe_reason() which is nonsensical after the
driver is bound.
* tag 'pwm/for-6.8-2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ukleinek/linux:
pwm: jz4740: Don't use dev_err_probe() in .request()
pwm: Fix out-of-bounds access in of_pwm_single_xlate()
pwm: bcm2835: Remove duplicate call to clk_rate_exclusive_put()
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
- Fix-ups
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Convert over to the new (kinda) GPIOD API
- Bug Fixes
- Fix uninitialised local variable
-----BEGIN PGP SIGNATURE-----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=SXS0
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid
duplicates, etc
- Convert over to the new (kinda) GPIOD API
Bug Fixes:
- Fix uninitialised local variable"
* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: hx8357: Convert to agnostic GPIO API
backlight: ili922x: Add an error code check in ili922x_write()
backlight: ili922x: Drop kernel-doc for local macros
backlight: mp3309c: Fix uninitialized local variable
backlight: pwm_bl: Use dev_err_probe
backlight: mp3309c: Add support for MPS MP3309C
dt-bindings: backlight: mp3309c: Remove two required properties
Use NUMA_NO_NODE instead of -1 as return value of memblock_search_pfn_nid()
to improve code readability and consistency with the callers of that
function.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmWoxkIQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kZjnCAC8XcBYOJ+lD3zDOC3fDue3qPBzxSBRvpi5
LL3MRDRON/0EFZdhEGG0CIZsSRCWuWRHiHPNhuxRBWO9qtqbX+aasJo+mKUo6YKP
AxId5Y8K708CZPP+rn6zasytRb6+u6EkyoYwk8hqIGixN7pGJg9a1sr/szZE1QWW
tvkGkoUX13KdCdvxCcE09h/kOfI60SwmkikQvfNFq59fTuwWw2h1qkpb/biT5xIt
OFB70TNQesmXCJZjIPmv212DHbYTPY7xVD+NdjcfHM4+TcFk4YGHEVmbJUhBTS29
VkWVZ01Q8veYY01oLJ3K5z8UekJYJyjMVbtWFAxYuxKf33iywqoF
=G+XX
-----END PGP SIGNATURE-----
Merge tag 'memblock-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Code readability improvement.
Use NUMA_NO_NODE instead of -1 as return value of
memblock_search_pfn_nid() to improve code readability
and consistency with the callers of that function"
* tag 'memblock-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Return NUMA_NO_NODE instead of -1 to improve code readability
vdpa/mlx5: support for resumable vqs
virtio_scsi: mq_poll support
3virtio_pmem: support SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
virtio: support for no-reset virtio PCI PM
Fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmWmgP8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpcfgH/0RD2S+NFY0ZEJz8BuI6GjykzYnyRW9iyxcw
epTLjPUcoEBttlw8TA+3PiPoNIJGfuU8Q4iKXJ8Jzql081tP9G1UxTIbj0v3Hx+q
0L2DUXfdAMYMLo5WQVl/PADV/10xLgExEh9jMqpU3IJIxVaLE/knD9ghRCDvDbs/
fOo3sSUGaNsSHYZs5bH73Q7cRKKmTLO+MzvHBbavFfz2fQ1b3vwecmJuQtAtK0JC
6JxH6Y38VfOl8jA6IHeEpGIHeF661HABkDDUh4UVEGOeyBl4E6ZcG4fjWSMinZ08
U3TbQLYOq10i8ki2LJKgoZHRv1HkxbM1Ogn0bsIh1hish8dPORM=
=RWjR
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vdpa/mlx5: support for resumable vqs
- virtio_scsi: mq_poll support
- 3virtio_pmem: support SHMEM_REGION
- virtio_balloon: stay awake while adjusting balloon
- virtio: support for no-reset virtio PCI PM
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Add mkey leak detection
vdpa/mlx5: Introduce reference counting to mrs
vdpa/mlx5: Use vq suspend/resume during .set_map
vdpa/mlx5: Mark vq state for modification in hw vq
vdpa/mlx5: Mark vq addrs for modification in hw vq
vdpa/mlx5: Introduce per vq and device resume
vdpa/mlx5: Allow modifying multiple vq fields in one modify command
vdpa/mlx5: Expose resumable vq capability
vdpa: Block vq property changes in DRIVER_OK
vdpa: Track device suspended state
scsi: virtio_scsi: Add mq_poll support
virtio_pmem: support feature SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
vdpa: Remove usage of the deprecated ida_simple_xx() API
virtio: Add support for no-reset virtio PCI PM
virtio_net: fix missing dma unmap for resize
vhost-vdpa: account iommu allocations
vdpa: Fix an error handling path in eni_vdpa_probe()
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs
Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52
nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU=
=HjCl
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
- Add debugfs support, initially used for reporting device migration
state. (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver. (Brett Creeley)
- Improved IOMMU allocation accounting visibility. (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices.
(Yishai Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver.
(Shameer Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver.
(Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmWhkhEbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiCLgQAJv6mzD79dVWKAZH27Lj
PK0ZSyu3fwgPxTmhRXysKKMs79WI2GlVx6nyW8pVe3w+OGWpdTcbZK2H/T/FryZQ
QsbKteueG83ni1cIdJFzmIM1jO79jhtsPxpclRS/VmECRhYA6+c7smynHyZNrVAL
wWkJIkS2uUEx3eUefzH4U2CRen3TILwHAXi27fJ8pHbr6Yor+XvUOgM3eQDjUj+t
eABL/pJr0qFDQstom6k7GLAsenRHKMLUG88ziSciSJxOg5YiT4py7zeLXuoEhVD1
kI9KE+Vle5EdZe8MzLLhmzLZoFVfhjyNfj821QjtfP3Gkj6TqnUWBKJAptMuQpdf
HklOLNmabrZbat+i6QqswrnQ5Z1doPz1uNBsl2lH+2/KIaT8bHZI+QgjK7pg2H2L
O679My0od4rVLpjnSLDdRoXlcLd6mmvq3663gPogziHBNdNl3oQBI3iIa7ixljkA
lxJbOZIDBAjzPk+t5NLYwkTsab1AY4zGlfr0M3Sk3q7tyj/MlBcX/fuqyhXjUfqR
Zhqaw2OaWD8R0EqfSK+wRXr1+z7EWJO/y1iq8RYlD5Mozo+6YMVThjLDUO+8mrtV
6/PL0woGALw0Tq1u0tw3rLjzCd9qwD9BD2fFUQwUWEe3j3wG2HCLLqyomxcmaKS8
WgvUXtufWyvonCcIeLKXI9Kt
=IuK2
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Add debugfs support, initially used for reporting device migration
state (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver (Brett Creeley)
- Improved IOMMU allocation accounting visibility (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices (Yishai
Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver (Shameer
Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver (Arnd
Bergmann)
* tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio: (22 commits)
vfio/virtio: fix virtio-pci dependency
hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
vfio/virtio: Declare virtiovf_pci_aer_reset_done() static
vfio/virtio: Introduce a vfio driver over virtio devices
vfio/pci: Expose vfio_pci_core_iowrite/read##size()
vfio/pci: Expose vfio_pci_core_setup_barmap()
virtio-pci: Introduce APIs to execute legacy IO admin commands
virtio-pci: Initialize the supported admin commands
virtio-pci: Introduce admin commands
virtio-pci: Introduce admin command sending function
virtio-pci: Introduce admin virtqueue
virtio: Define feature bit for administration virtqueue
vfio/type1: account iommu allocations
vfio/pds: Add multi-region support
vfio/pds: Move seq/ack bitmaps into region struct
vfio/pds: Pass region info to relevant functions
vfio/pds: Move and rename region specific info
vfio/pds: Only use a single SGL for both seq and ack
vfio/pds: Fix calculations in pds_vfio_dirty_sync
MAINTAINERS: Add vfio debugfs interface doc link
...
This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into the
iommu itself. The Intel implementation will also generate an ATC
invalidation to flush the device IOTLB as it unambiguously knows the
device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables (aka
nested translation for VMs) to allow Intel to have full functionality for
simple cases. An Intel implementation of the operation is provided.
Fix a small bug in the selftest mock iommu driver probe.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZaFiRQAKCRCFwuHvBreF
YbmgAP9Z0+cAUPKxUKaMRls8YR+gmaOCniSkqBlyrxcib+F/WAD2NPLcBPBRk2o7
GfXPIrovx96Btf8M40AFdiTEp7LABw==
=9POe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
the iommu itself. The Intel implementation will also generate an
ATC invalidation to flush the device IOTLB as it unambiguously
knows the device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables
(aka nested translation for VMs) to allow Intel to have full
functionality for simple cases. An Intel implementation of the
operation is provided.
Also fix a small bug in the selftest mock iommu driver probe"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check the bus type during probe
iommu/vt-d: Add iotlb flush for nested domain
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
iommufd/selftest: Add mock_domain_cache_invalidate_user support
iommu: Add iommu_copy_struct_from_user_array helper
iommufd: Add IOMMU_HWPT_INVALIDATE
iommu: Add cache_invalidate_user op
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----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=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
- Enable percpu page allocator for risc-v. There are risc-v
configurations with sparse NUMA configurations and small vmalloc
space causing dynamic percpu allocations to fail as the backing chunk
stride is too far apart.
-----BEGIN PGP SIGNATURE-----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=fwxu
-----END PGP SIGNATURE-----
Merge tag 'percpu-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"Enable percpu page allocator for RISC-V.
There are RISC-V configurations with sparse NUMA configurations and
small vmalloc space causing dynamic percpu allocations to fail as the
backing chunk stride is too far apart"
* tag 'percpu-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
riscv: Enable pcpu page first chunk allocator
mm: Introduce flush_cache_vmap_early()
- Hard-code the inodes for eventfs to the same number for files, and
the same number for directories.
- Have getdent() not create dentries/inodes in iterate_shared() as now
it has hard-coded inode numbers
- Use kcalloc() instead of kzalloc() on a list of elements
- Fix seq_buf warning and make static work properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZak5GxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvZYAP0ZO4YN9fKnl6Cw1GNCwPtMO13dEg9D
mIvwftxX8DuaegD/fQFY9gBc+ZMSCbiWVJBAyfO57NPvHk4S3slwPVuL9gA=
=iKJI
-----END PGP SIGNATURE-----
Merge tag 'eventfs-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull eventfs updates from Steven Rostedt:
- Remove "lookup" parameter of create_dir_dentry() and
create_file_dentry(). These functions were called by lookup and the
readdir logic, where readdir needed it to up the ref count of the
dentry but the lookup did not. A "lookup" parameter was passed in to
tell it what to do, but this complicated the code. It is better to
just always up the ref count and require the caller to decrement it,
even for lookup.
- Modify the .iterate_shared callback to not use the dcache_readdir()
logic and just handle what gets displayed by that one function. This
removes the need for eventfs to hijack the file->private_data from
the dcache_readdir() "cursor" pointer, and makes the code a bit more
sane
- Use the root and instance inodes for default ownership. Instead of
walking the dentry tree and updating each dentry gid, use the
getattr(), setattr() and permission() callbacks to set the ownership
and permissions using the root or instance as the default
- Some other optimizations with the eventfs iterate_shared logic
- Hard-code the inodes for eventfs to the same number for files, and
the same number for directories
- Have getdent() not create dentries/inodes in iterate_shared() as now
it has hard-coded inode numbers
- Use kcalloc() instead of kzalloc() on a list of elements
- Fix seq_buf warning and make static work properly.
* tag 'eventfs-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Make DECLARE_SEQ_BUF() usable
eventfs: Use kcalloc() instead of kzalloc()
eventfs: Do not create dentries nor inodes in iterate_shared
eventfs: Have the inodes all for files and directories all be the same
eventfs: Shortcut eventfs_iterate() by skipping entries already read
eventfs: Read ei->entries before ei->children in eventfs_iterate()
eventfs: Do ctx->pos update for all iterations in eventfs_iterate()
eventfs: Have eventfs_iterate() stop immediately if ei->is_freed is set
tracefs/eventfs: Use root and instance inodes as default ownership
eventfs: Stop using dcache_readdir() for getdents()
eventfs: Remove "lookup" parameter from create_dir/file_dentry()
- Allow kernel trace instance creation to specify what events are created
Inside the kernel, a subsystem may create a tracing instance that it can
use to send events to user space. This sub-system may not care about the
thousands of events that exist in eventfs. Allow the sub-system to specify
what sub-systems of events it cares about, and only those events are exposed
to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than just the
architecture page size. A new tracefs file called "buffer_subbuf_size_kb"
is created. The user can now specify a minimum size the sub-buffer may be
in kilobytes. Note, that the implementation currently make the sub-buffer
size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in
kilobyte size, and the sub-buffer will be updated to the next size that
it will can accommodate it. If the user writes in 10, it will change the
size to be 4 pages on x86 (16K), as that is the next available size that
can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring buffer.
If the ring buffer detects inconsistent timestamps, there's a debug config
options that will dump the contents of the meta data of the sub-buffer that
is used for debugging. Add some more information to this dump that helps
with debugging.
- Add more timestamp debugging checks (only triggers when the config is enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just under
2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been
removed.
- More selftests were added.
- Some code clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZ8p3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql2GAQDZg/zlFEiJHyTfWbCIE8pA3T5xbzKo
26TNxIZAxJJZpQEAvGFU5Smy14pG6soEoVMp8B6ZOANbqU8VVamhOL+r+Qw=
=0OYG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...