IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix erratum #1485 on Zen4 parts where running with STIBP disabled can
cause an #UD exception. The performance impact of the fix is negligible.
Reported-by: René Rebe <rene@exactcode.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: René Rebe <rene@exactcode.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/D99589F4-BC5D-430B-87B2-72C20370CF57@exactcode.com
Unified Memory Controller (UMC) events were introduced with Zen 4 as a
part of the Performance Monitoring Version 2 (PerfMonV2) enhancements.
An event is specified using the EventSelect bits and the RdWrMask bits
can be used for additional filtering of read and write requests.
As of now, a maximum of 12 channels of DDR5 are available on each socket
and each channel is controlled by a dedicated UMC. Each UMC, in turn,
has its own set of performance monitoring counters.
Since the MSR address space for the UMC PERF_CTL and PERF_CTR registers
are reused across sockets, uncore groups are created on the basis of
socket IDs. Hence, group exclusivity is mandatory while opening events
so that events for an UMC can only be opened on CPUs which are on the
same socket as the corresponding memory channel.
For each socket, the total number of available UMC counters and active
memory channels are determined from CPUID leaf 0x80000022 EBX and ECX
respectively. Usually, on Zen 4, each UMC has four counters.
MSR assignments are determined on the basis of active UMCs. E.g. if
UMCs 1, 4 and 9 are active for a given socket, then
* UMC 1 gets MSRs 0xc0010800 to 0xc0010807 as PERF_CTLs and PERF_CTRs
* UMC 4 gets MSRs 0xc0010808 to 0xc001080f as PERF_CTLs and PERF_CTRs
* UMC 9 gets MSRs 0xc0010810 to 0xc0010817 as PERF_CTLs and PERF_CTRs
If there are sockets without any online CPUs when the amd_uncore driver
is loaded, UMCs for such sockets will not be discoverable since the
mechanism relies on executing the CPUID instruction on an online CPU
from the socket.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/b25f391205c22733493abec1ed850b71784edc5f.1696425185.git.sandipan.das@amd.com
In some cases, it may be necessary to restrict opening PMU events to a
subset of CPUs. E.g. Unified Memory Controller (UMC) PMUs are specific
to each active memory channel and the MSR address space for the PERF_CTL
and PERF_CTR registers is reused on each socket. Thus, opening events
for a specific UMC PMU should be restricted to CPUs belonging to the
same socket as that of the UMC. The "cpumask" of the PMU should also
reflect this accordingly.
Uncore PMUs which require this can use the new group attribute in struct
amd_uncore_pmu to set a valid group ID during the scan() phase. Later,
during init(), an uncore context for a CPU will be unavailable if the
group ID does not match.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/937d6d71010a48ea4e069f4904b3116a5f99ecdf.1696425185.git.sandipan.das@amd.com
Uncore PMUs have traditionally been registered in the module init path.
This is fine for the existing DF and L3 PMUs since the CPUID information
does not vary across CPUs but not for the memory controller (UMC) PMUs
since information like active memory channels can vary for each socket
depending on how the DIMMs have been physically populated.
To overcome this, the discovery of PMU information using CPUID is moved
to the startup of UNCORE_STARTING. This cannot be done in the startup of
UNCORE_PREP since the hotplug callback does not run on the CPU that is
being brought online.
Previously, the startup of UNCORE_PREP was used for allocating uncore
contexts following which, the startup of UNCORE_STARTING was used to
find and reuse an existing sibling context, if possible. Any unused
contexts were added to a list for reclaimation later during the startup
of UNCORE_ONLINE.
Since all required CPUID info is now available only after the startup of
UNCORE_STARTING has completed, context allocation has been moved to the
startup of UNCORE_ONLINE. Before allocating contexts, the first CPU that
comes online has to take up the additional responsibility of registering
the PMUs. This is a one-time process though. Since sibling discovery now
happens prior to deciding whether a new context is required, there is no
longer a need to track and free up unused contexts.
The teardown of UNCORE_ONLINE and UNCORE_PREP functionally remain the
same.
Overall, the flow of control described above is achieved using the
following handlers for managing uncore PMUs. It is mandatory to define
them for each type of uncore PMU.
* scan() runs during startup of UNCORE_STARTING and collects PMU info
using CPUID.
* init() runs during startup of UNCORE_ONLINE, registers PMUs and sets
up uncore contexts.
* move() runs during teardown of UNCORE_ONLINE and migrates uncore
contexts to a shared sibling, if possible.
* free() runs during teardown of UNCORE_PREP and frees up uncore
contexts.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e6c447e48872fcab8452e0dd81b1c9cb09f39eb4.1696425185.git.sandipan.das@amd.com
Since struct amd_uncore is used to manage per-cpu contexts, rename it to
amd_uncore_ctx in order to better reflect its purpose. Add a new struct
amd_uncore_pmu to encapsulate all attributes which are shared by per-cpu
contexts for a corresponding PMU. These include the number of counters,
active mask, MSR and RDPMC base addresses, etc. Since the struct pmu is
now embedded, the corresponding amd_uncore_pmu for a given event can be
found by simply using container_of().
Finally, move all PMU-specific code to separate functions. While the
original event management functions continue to provide the base
functionality, all PMU-specific quirks and customizations are applied in
separate functions.
The motivation is to simplify the management of uncore PMUs.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/24b38c49a5dae65d8c96e5d75a2b96ae97aaa651.1696425185.git.sandipan.das@amd.com
Per-package perf events are typically registered with a single CPU only,
however they can be read across all the CPUs within the package.
Currently perf_event_read maps the event CPU according to the topology
information to avoid an unnecessary SMP call, however
perf_event_read_local deals with hard values and rejects a read with a
failure if the CPU is not the one exactly registered. Allow similar
mapping within the perf_event_read_local if the perf event in question
can support this.
This allows users like BPF code to read the package perf events properly
across different CPUs within a package.
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230913125956.3652667-1-tero.kristo@linux.intel.com
The MSR registers for reading the package residency counters are
available on every CPU of the package. To avoid doing unnecessary SMP
calls to read the values for these from the various CPUs inside a
package, allow reading them from any CPU of the package.
Suggested-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230912124432.3616761-2-tero.kristo@linux.intel.com
Some parameters or return codes were either wrong or missing,
update them.
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/ZSOjQW3e2nJR4bAo@fedora.fritz.box
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS=y (for
array indexing) and CONFIG_FORTIFY_SOURCE=y (for strcpy/memcpy-family
functions).
Found with Coccinelle:
https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1]
Add __counted_by for 'struct rapl_pmus'.
No change in functionality intended.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231006201754.work.473-kees@kernel.org
The kernel test robot reported kernel-doc warnings here:
monitor.c:34: warning: Cannot understand * @rmid_free_lru A least recently used list of free RMIDs on line 34 - I thought it was a doc line
monitor.c:41: warning: Cannot understand * @rmid_limbo_count count of currently unused but (potentially) on line 41 - I thought it was a doc line
monitor.c:50: warning: Cannot understand * @rmid_entry - The entry in the limbo and free lists. on line 50 - I thought it was a doc line
We don't have a syntax for documenting individual data items via
kernel-doc, so remove the "/**" kernel-doc markers and add a hyphen
for consistency.
Fixes: 6a445edce657 ("x86/intel_rdt/cqm: Add RDT monitoring initialization")
Fixes: 24247aeeabe9 ("x86/intel_rdt/cqm: Improve limbo list processing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20231006235132.16227-1-rdunlap@infradead.org
Change 0 to NULL when initializing the test field of perf_msr structs to
avoid the following sparse warnings:
make C=2 arch/x86/events/rapl.o
CHECK arch/x86/events/rapl.c
...
arch/x86/events/rapl.c:540:59: warning: Using plain integer as NULL pointer
arch/x86/events/rapl.c:542:59: warning: Using plain integer as NULL pointer
arch/x86/events/rapl.c:543:59: warning: Using plain integer as NULL pointer
arch/x86/events/rapl.c:544:59: warning: Using plain integer as NULL pointer
Signed-off-by: David Reaver <me@davidreaver.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230801155651.108076-1-me@davidreaver.com
Use local64_try_cmpxchg() instead of local64_cmpxchg(*ptr, old, new) == old.
X86 CMPXCHG instruction returns success in ZF flag, so this change saves a
compare after CMPXCHG (and related move instruction in front of CMPXCHG).
Also, try_cmpxchg() implicitly assigns old *ptr value to "old" when CMPXCHG
fails. There is no need to re-read the value in the loop.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20230807145134.3176-2-ubizjak@gmail.com
According to the following commit:
f5fe24ef17b5 ("lockref: stop doing cpu_relax in the cmpxchg loop")
"On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction."
Based on the above observation, remove cpu_relax() from the
local64_cmpxchg() loop of rapl_event_update().
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20230807145134.3176-1-ubizjak@gmail.com
In snp_accept_memory(), the npages variables value is calculated from
phys_addr_t variables but is an unsigned int. A very large range passed
into snp_accept_memory() could lead to truncating npages to zero. This
doesn't happen at the moment but let's be prepared.
Fixes: 6c3211796326 ("x86/sev: Add SNP-specific unaccepted memory support")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/6d511c25576494f682063c9fb6c705b526a3757e.1687441505.git.thomas.lendacky@amd.com
SNP retrieves the majority of CPUID information from the SNP CPUID page.
But there are times when that information needs to be supplemented by the
hypervisor, for example, obtaining the initial APIC ID of the vCPU from
leaf 1.
The current implementation uses the MSR protocol to retrieve the data from
the hypervisor, even when a GHCB exists. The problem arises when an NMI
arrives on return from the VMGEXIT. The NMI will be immediately serviced
and may generate a #VC requiring communication with the hypervisor.
Since a GHCB exists in this case, it will be used. As part of using the
GHCB, the #VC handler will write the GHCB physical address into the GHCB
MSR and the #VC will be handled.
When the NMI completes, processing resumes at the site of the VMGEXIT
which is expecting to read the GHCB MSR and find a CPUID MSR protocol
response. Since the NMI handling overwrote the GHCB MSR response, the
guest will see an invalid reply from the hypervisor and self-terminate.
Fix this problem by using the GHCB when it is available. Any NMI
received is properly handled because the GHCB contents are copied into
a backup page and restored on NMI exit, thus preserving the active GHCB
request or result.
[ bp: Touchups. ]
Fixes: ee0bfa08a345 ("x86/compressed/64: Add support for SEV-SNP CPUID table in #VC handlers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/a5856fa1ebe3879de91a8f6298b6bbd901c61881.1690578565.git.thomas.lendacky@amd.com
- Fix the module compression with xz so the in-kernel decompressor works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
-----BEGIN PGP SIGNATURE-----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=RJdX
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the module compression with xz so the in-kernel decompressor
works
- Document a kconfig idiom to express an optional dependency between
modules
- Make modpost, when W=1 is given, detect broken drivers that reference
.exit.* sections
- Remove unused code
* tag 'kbuild-fixes-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove stale code for 'source' symlink in packaging scripts
modpost: Don't let "driver"s reference .exit.*
vmlinux.lds.h: remove unused CPU_KEEP and CPU_DISCARD macros
modpost: add missing else to the "of" check
Documentation: kbuild: explain handling optional dependencies
kbuild: Use CRC32 and a 1MiB dictionary for XZ compressed modules
to issues which were introduced after 6.5.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZRmSDAAKCRDdBJ7gKXxA
jlSaAQCe3SnBdjRmuzbp5iIfNJOY7GXLN4NwMsArRUxRGY27IwD+KWhXZP/ydVnt
ZgS4x9rmarHuh5Pxds+6SRGhihRz/Ak=
=sf/5
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Fourteen hotfixes, eleven of which are cc:stable. The remainder
pertain to issues which were introduced after 6.5"
* tag 'mm-hotfixes-stable-2023-10-01-08-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Crash: add lock to serialize crash hotplug handling
selftests/mm: fix awk usage in charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh that may cause error
mm: mempolicy: keep VMA walk if both MPOL_MF_STRICT and MPOL_MF_MOVE are specified
mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
mm, memcg: reconsider kmem.limit_in_bytes deprecation
mm: zswap: fix potential memory corruption on duplicate store
arm64: hugetlb: fix set_huge_pte_at() to work with all swap entries
mm: hugetlb: add huge page size param to set_huge_pte_at()
maple_tree: add MAS_UNDERFLOW and MAS_OVERFLOW states
maple_tree: add mas_is_active() to detect in-tree walks
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
mm: abstract moving to the next PFN
mm: report success more often from filemap_map_folio_range()
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Here is a single, much requested, fix for a set of misc drivers to
resolve a much reported regression in the -rc series that has also
propagated back to the stable releases. Sorry for the delay, lots of
conference travel for a few weeks put me very far behind in patch
wrangling.
It has been reported by many to resolve the reported problem, and has
been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZRlkBA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXywCgpZTozZr59dQeF48Z+iy2xBbimIUAoIqXUf/Q
5/iAwx8K5CHWBjXfwmaS
=AG4X
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fix from Greg KH:
"Here is a single, much requested, fix for a set of misc drivers to
resolve a much reported regression in the -rc series that has also
propagated back to the stable releases. Sorry for the delay, lots of
conference travel for a few weeks put me very far behind in patch
wrangling.
It has been reported by many to resolve the reported problem, and has
been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: Fix some platforms can not boot and move the l1ss judgment to probe
Here are 2 tty/serial driver fixes for 6.6-rc4 that resolve some
reported regressions:
- revert a n_gsm change that ended up causing problems
- 8250_port fix for irq data
both have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZRllBw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylHwgCeJLftFU1rY4eHkpk/0uIyb89JZGMAoMtzY+iT
vsq0fu2cCQLQph3RYHD9
=t1ba
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are two tty/serial driver fixes for 6.6-rc4 that resolve some
reported regressions:
- revert a n_gsm change that ended up causing problems
- 8250_port fix for irq data
both have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux"
serial: 8250_port: Check IRQ data before use
AMD-derived Hygon processors, and fix a SGX kernel crash in the
page fault handler that can trigger when ksgxd races to reclaim
the SECS special page, by making the SECS page unswappable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YK/4
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a kerneldoc build warning fix, add SRSO mitigation for
AMD-derived Hygon processors, and fix a SGX kernel crash in the page
fault handler that can trigger when ksgxd races to reclaim the SECS
special page, by making the SECS page unswappable"
* tag 'x86-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race
x86/srso: Add SRSO mitigation for Hygon processors
x86/kgdb: Fix a kerneldoc warning when build with W=1
may trigger when timer/hrtimer softirqs are pending, which
are otherwise hotplug-safe and don't merit a warning.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ms07
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a spurious kernel warning during CPU hotplug events that may
trigger when timer/hrtimer softirqs are pending, which are otherwise
hotplug-safe and don't merit a warning"
* tag 'timers-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Tag (hr)timer softirq as hotplug safe
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ByhJ
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix a RT tasks related lockup/live-lock during CPU offlining"
* tag 'sched-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix live lock between select_fallback_rq() and RT push
and fix kexec kernel PMI handlers on AMD systems that get loaded
on older kernels that have an unexpected register state.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rzXG
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Misc fixes: work around an AMD microcode bug on certain models, and
fix kexec kernel PMI handlers on AMD systems that get loaded on older
kernels that have an unexpected register state"
* tag 'perf-urgent-2023-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd: Do not WARN() on every IRQ
perf/x86/amd/core: Fix overflow reset on hotplug
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.
Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.
There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.
The dual rule that drivers must not reference .init.* is implemented
since commit 0db252452378 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.
Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove the left-over of commit e24f6628811e ("modpost: remove all
traces of cpuinit/cpuexit sections").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These are teh latest bug fixes that have come up in the soc tree.
Most of these are fairly minor. Most notably, the majority of
changes this time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had
a simple bug that resulted in invalid data, and a lesser fix for
the optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts"
soc driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems
with clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot
time warnings and errors
-----BEGIN PGP SIGNATURE-----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=HAuE
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the latest bug fixes that have come up in the soc tree. Most
of these are fairly minor. Most notably, the majority of changes this
time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had a
simple bug that resulted in invalid data, and a lesser fix for the
optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts" soc
driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot time
warnings and errors"
* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
MAINTAINERS: Fix Florian Fainelli's email address
arm64: defconfig: enable syscon-poweroff driver
ARM: locomo: fix locomolcd_power declaration
soc: loongson: loongson2_guts: Remove unneeded semicolon
soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
soc: loongson: loongson_pm2: Populate children syscon nodes
dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
soc: loongson: loongson_pm2: Drop useless of_device_id compatible
dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
soc: loongson: loongson_pm2: Add dependency for INPUT
arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
ARM: uniphier: fix cache kernel-doc warnings
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
...
- Make sure 32 bit applications using user events have aligned access when
running on a 64 bit kernel.
- Add cond_resched in the loop that handles converting enums in print_fmt
string is trace events.
- Fix premature wake ups of polling processes in the tracing ring buffer. When
a task polls waiting for a percentage of the ring buffer to be filled, the
writer still will wake it up at every event. Add the polling's percentage to
the "shortest_full" list to tell the writer when to wake it up.
- For eventfs dir lookups on dynamic events, an event system's only event could
be removed, leaving its dentry with no children. This is totally legitimate.
But in eventfs_release() it must not access the children array, as it is only
allocated when the dentry has children.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZRiI2xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlvoAQDKbevbqA0C8lEV1rbVh4Q9Rnq580rz
EAyEO/RrSOwE9AEA2z+Q597mDjEiqQBvqTjBkS+0xZ7AUQYZRWgTHRIbegg=
=tqOM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Make sure 32-bit applications using user events have aligned access
when running on a 64-bit kernel.
- Add cond_resched in the loop that handles converting enums in
print_fmt string is trace events.
- Fix premature wake ups of polling processes in the tracing ring
buffer. When a task polls waiting for a percentage of the ring buffer
to be filled, the writer still will wake it up at every event. Add
the polling's percentage to the "shortest_full" list to tell the
writer when to wake it up.
- For eventfs dir lookups on dynamic events, an event system's only
event could be removed, leaving its dentry with no children. This is
totally legitimate. But in eventfs_release() it must not access the
children array, as it is only allocated when the dentry has children.
* tag 'trace-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Test for dentries array allocated in eventfs_release()
tracing/user_events: Align set_bit() address for all archs
tracing: relax trace_event_eval_update() execution with cond_resched()
ring-buffer: Update "shortest_full" in polling
The dcache_dir_open_wrapper() could be called when a dynamic event is
being deleted leaving a dentry with no children. In this case the
dlist->dentries array will never be allocated. This needs to be checked
for in eventfs_release(), otherwise it will trigger a NULL pointer
dereference.
Link: https://lore.kernel.org/linux-trace-kernel/20230930090106.1c3164e9@rorschach.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: ef36b4f92868 ("eventfs: Remember what dentries were created on dir open")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.
Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.
Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/
Cc: stable@vger.kernel.org
Fixes: 7235759084a4 ("tracing/user_events: Use remote writes for event enablement")
Reported-by: Clément Léger <cleger@rivosinc.com>
Suggested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.
Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.
Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84ff by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e84ff ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- fix the narea calculation in swiotlb initialization (Ross Lagerwall)
- fix the check whether a device has used swiotlb (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=bhgc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix the narea calculation in swiotlb initialization (Ross Lagerwall)
- fix the check whether a device has used swiotlb (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-09-30' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix the check whether a device has used software IO TLB
swiotlb: use the calculated number of areas
* Handle a race between writing and shrinking block devices by
returning EIO.
* Fix a typo in a comment.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZRWpqAAKCRBKO3ySh0YR
puinAP46EI8AvxQOid2ukGIEP09ZdhYNcJkWsigZ8k7Z/wcqagD/UVliaDPGC2kk
rlrPN6jmNyqDzAP6muBmqu2v44GVWwY=
=7nql
-----END PGP SIGNATURE-----
Merge tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
- Handle a race between writing and shrinking block devices by
returning EIO
- Fix a typo in a comment
* tag 'iomap-6.6-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Spelling s/preceeding/preceding/g
iomap: add a workaround for racy i_size updates on block devices
Fix a possible NULL pointer dereference in the error path of
acpi_video_bus_add() resulting from recent changes (Dinghao Liu).
-----BEGIN PGP SIGNATURE-----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=+sV7
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a possible NULL pointer dereference in the error path of
acpi_video_bus_add() resulting from recent changes (Dinghao Liu)"
* tag 'acpi-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Fix NULL pointer dereference in acpi_video_bus_add()
- Fix arch_stack_walk_reliable(), used by live patching.
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to: Joe Lawrence, Petr Mladek.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmUYGLITHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgMJ3D/9UqgUm8f0vIGYu2jhvTYoR+b2Dqwls
PFQKqiN78gWi/8njduY1j1U4EB8fJuFS972mDV04+mvUBM1Qj/jcCDKyO0lpYb9C
ns+UUYFXF5QNBNrnSUSaItPRpXPceHEcIsVMolhRMBZHvKO1sl8D+kmpmnUML3Do
qf/u508Xz3oB/+hPPPF/rOew9UHTroosD5/BPmaYzvjLx+8NTtJGuQI5spqyBI80
nerphmJoE7TjA08QgbtKd15xyYd+wciADJVPRzCnOJ2SNka8D+marmFG53c1LGLc
j/5gbmogy7PtKYpCDOg8XAjqs1VMggZVGECC6VRAF2+IykdQP+6eV9rGluUafbQr
51bRClOe4dUIBqr0RIbNZGA80+hb9tqVEe5J2jyO4/f9XLd49prY2OSxAIgteCt8
Ak3W8TcSKcmzx45yPyg0Xac66HmvFzvCkj8oZTLT4m+11oPjWoxNSy3040anxJ8Y
htYhl5T/tsEU8ZC96y4RfP1T20HQZW4PmXsJKLW/MADy5sN7YCzpMf9G2uj4id5J
fizB7tRm2CmIfHsw6e8KGJ6NrD2uJcOwLR6Y7zb7QJ0PzwgYQWfjTCMXo2D1zEak
RzyaKcY/ySkFZMb1sb867nc+VFCAG1UNJiNiZKNifZ0RElx+6U2KgZTUwYYs2aj2
jdudr2tl5BwhGQ==
=gh/A
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix arch_stack_walk_reliable(), used by live patching
- Fix powerpc selftests to work with run_kselftest.sh
Thanks to Joe Lawrence and Petr Mladek.
* tag 'powerpc-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix emit_tests to work with run_kselftest.sh
powerpc/stacktrace: Fix arch_stack_walk_reliable()
- Fix NFSv4 READ corner case
-----BEGIN PGP SIGNATURE-----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=aD10
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix NFSv4 READ corner case
* tag 'nfsd-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix zero NFSv4 READ results when RQ_SPLICE_OK is not set
Eric reported that handling corresponding crash hotplug event can be
failed easily when many memory hotplug event are notified in a short
period. They failed because failing to take __kexec_lock.
=======
[ 78.714569] Fallback order for Node 0: 0
[ 78.714575] Built 1 zonelists, mobility grouping on. Total pages: 1817886
[ 78.717133] Policy zone: Normal
[ 78.724423] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 78.727207] crash hp: kexec_trylock() failed, elfcorehdr may be inaccurate
[ 80.056643] PEFILE: Unsigned PE binary
=======
The memory hotplug events are notified very quickly and very many, while
the handling of crash hotplug is much slower relatively. So the atomic
variable __kexec_lock and kexec_trylock() can't guarantee the
serialization of crash hotplug handling.
Here, add a new mutex lock __crash_hotplug_lock to serialize crash hotplug
handling specifically. This doesn't impact the usage of __kexec_lock.
Link: https://lkml.kernel.org/r/20230926120905.392903-1-bhe@redhat.com
Fixes: 247262756121 ("crash: add generic infrastructure for crash hotplug support")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
According to the awk manual, the -e option does not need to be specified
in front of 'program' (unless you need to mix program-file).
The redundant -e option can cause error when users use awk tools other
than gawk (for example, mawk does not support the -e option).
Error Example:
awk: not an option: -e
Link: https://lkml.kernel.org/r/VI1P193MB075228810591AF2FDD7D42C599C3A@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calling mbind() with MPOL_MF_{MOVE|MOVEALL} | MPOL_MF_STRICT, kernel
should attempt to migrate all existing pages, and return -EIO if there is
misplaced or unmovable page. Then commit 6f4576e3687b ("mempolicy: apply
page table walker on queue_pages_range()") messed up the return value and
didn't break VMA scan early ianymore when MPOL_MF_STRICT alone. The
return value problem was fixed by commit a7f40cfe3b7a ("mm: mempolicy:
make mbind() return -EIO when MPOL_MF_STRICT is specified"), but it broke
the VMA walk early if unmovable page is met, it may cause some pages are
not migrated as expected.
The code should conceptually do:
if (MPOL_MF_MOVE|MOVEALL)
scan all vmas
try to migrate the existing pages
return success
else if (MPOL_MF_MOVE* | MPOL_MF_STRICT)
scan all vmas
try to migrate the existing pages
return -EIO if unmovable or migration failed
else /* MPOL_MF_STRICT alone */
break early if meets unmovable and don't call mbind_range() at all
else /* none of those flags */
check the ranges in test_walk, EFAULT without mbind_range() if discontig.
Fixed the behavior.
Link: https://lkml.kernel.org/r/20230920223242.3425775-1-yang@os.amperecomputing.com
Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commits 86327e8eb94c ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f77502f ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb94c is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f77502f as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f77502f as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be5f ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb94c ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f77502f ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
