IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more details:
- Add missing additionalProperties on child nodes to the pata-common DT
bindings (Rob).
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas).
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias).
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me).
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk driver
resume operation not being synchronized with libata EH port resume
handling. This is addressed by changing the scsi disk driver disk
start/stop control to allow libata to execute disk suspend (spin
down) and resume (spin up) on its own during system suspend/resume.
Runtime suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races.
- Establish a link between ATA ports and SCSI devices to order PM
operations.
- Fix device removal to avoid issues with driver rmmod removal.
- Fix synchronization of libata device rescan and SCSI disk resume
operation.
- Remove libsas PM operations as suspend/resume is handled directly
by the sas controller resume.
- Fix the SCSI disk driver to not issue commands to suspended disks,
thus avoiding potential system lock-up on resume.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZRbR0gAKCRDdoc3SxdoY
dkArAP9PFTRgsXEwfE7arBXCwQqXj/W0R2KgKug7Fno+SoQLnAD/ZKe2TR50uwxr
9mwYROdMgi50T9ax1RX1jWA0npGXmQg=
=cFzG
-----END PGP SIGNATURE-----
Merge tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"A larger than usual set of fixes for 6.6-rc4 due to the unexpected
number of fixes needed to address ATA disks suspend/resume issues.
In more detail:
- Add missing additionalProperties on child nodes to the pata-common
DT bindings (Rob)
- Fix handling of the REPORT SUPPORTED OPERATION CODES command to
ignore reserved bits (Niklas)
- Increase port multiplier soft reset timeout to accomodate slow
devices and avoid issues on wakeup (Matthias)
- A couple of minor code fixes to avoid compilation warnings in
libata-core and libata-eh (me)
- Many patches from me to address suspend/resume issues, and in
particular a potential deadlock on resume due to the SCSI disk
driver resume operation not being synchronized with libata EH port
resume handling.
This is addressed by changing the scsi disk driver disk start/stop
control to allow libata to execute disk suspend (spin down) and
resume (spin up) on its own during system suspend/resume. Runtime
suspend/resume control remains with the SCSI disk driver.
Other fixes include:
- Fix libata power management request issuing to avoid races
- Establish a link between ATA ports and SCSI devices to order PM
operations
- Fix device removal to avoid issues with driver rmmod removal
- Fix synchronization of libata device rescan and SCSI disk resume
operation
- Remove libsas PM operations as suspend/resume is handled
directly by the sas controller resume
- Fix the SCSI disk driver to not issue commands to suspended
disks, thus avoiding potential system lock-up on resume"
* tag 'ata-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-eh: Fix compilation warning in ata_eh_link_report()
ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
scsi: sd: Do not issue commands to suspended disks on shutdown
ata: libata-core: Do not register PM operations for SAS ports
ata: libata-scsi: Fix delayed scsi_rescan_device() execution
scsi: Do not attempt to rescan suspended devices
ata: libata-scsi: Disable scsi device manage_system_start_stop
scsi: sd: Differentiate system and runtime start/stop management
ata: libata-scsi: link ata port and scsi device
ata: libata-core: Fix port and device removal
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-sata: increase PMP SRST timeout to 10s
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
-----BEGIN PGP SIGNATURE-----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=tdkz
-----END PGP SIGNATURE-----
Merge tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Just two minor comment / documentation fixes for the block side"
* tag 'block-6.6-2023-09-28' of git://git.kernel.dk/linux:
block: fix kernel-doc for disk_force_media_change()
block: correct stale comment in rq_qos_wait
-----BEGIN PGP SIGNATURE-----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=fAm6
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix going to stable for the IORING_OP_LINKAT flag handling"
* tag 'io_uring-6.6-2023-09-28' of git://git.kernel.dk/linux:
io_uring/fs: remove sqe->rw_flags checking from LINKAT
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmUWfrsACgkQu+CwddJF
iJo6+QgAnn3klZX5wOfH93tdlOz2TNy8QVSmNuITDKThLJg9r8YkQJdp6NYHR0Rc
vrbZ2pMqF/LQ/LW49uZahQwVi7811psfU3PqbSC3CRtUYq0RUMu5PaeItvRp4S5n
2zYiWVSNGfSmG4jQm2L2nMjDRK8m3oLKwuxKejv3UQLDZ5U1Fh36k75lZK1PERmu
+cBQATtncj4N1rF0eY8mif3ctqqkVqz79t/nU/FCBx0+v3s4wTzYB1y8l5FEH2cM
iU4A4jsZe147DxHadUQF2ahnj6oaOacgtg846WN5P73BjiRhdrJaTS8HSeAS/RIo
e/PpbLzOFp4Rz+2u1Me7nFK64qFjyw==
=+WB7
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- stable fix to prevent list corruption when destroying caches with
leftover objects (Rafael Aquini)
- fix for a gotcha in kmalloc_size_roundup() when calling it with too
high size, discovered when recently a networking call site had to be
fixed for a different issue (David Laight)
* tag 'slab-fixes-for-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: kmalloc_size_roundup() must not return 0 for non-zero size
mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy()
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker
-----BEGIN PGP SIGNATURE-----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=7M9M
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular pull, this feel suspiciously light so I expect next week might
be a bit heavier? Let's see how we go. This is from a code point of
view ivpu and i915 fixes.
The only other patch is adding Danilo Krummrich to the nouveau
maintainers, he's agreed to take on more of the roll after Ben
retired.
MAINTAINERS:
- add Danilo for nouveau
ivpu:
- Add PCI ids for Arrow Lake
- Fix memory corruption during IPC
- Avoid dmesg flooding
- 40xx: Wait for clock resource
- 40xx: Fix interrupt usage
- 40xx: Support caching when loading firmware
i915:
- Fix a panic regression on gen8_ggtt_insert_entries
- Fix load issue due to reservation address in ggtt_reserve_guc_top
- Fix a possible deadlock with guc busyness worker"
* tag 'drm-fixes-2023-09-29' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Use cached buffers for FW loading
accel/ivpu/40xx: Fix missing VPUIP interrupts
accel/ivpu/40xx: Disable frequency change interrupt
accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
accel/ivpu: Don't flood dmesg with VPU ready message
accel/ivpu: Do not use wait event interruptible
MAINTAINERS: update nouveau maintainers
i915/guc: Get runtime pm in busyness worker only if already active
drm/i915/gt: Fix reservation address in ggtt_reserve_guc_top
i915: Limit the length of an sg list to the requested length
accel/ivpu: Add Arrow Lake pci id
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
-----BEGIN PGP SIGNATURE-----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=kFxF
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential spinlock deadlock in gpio-timberdale
- mark the gpio-pmic-eic-sprd driver as one that can sleep
* tag 'gpio-fixes-for-v6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
gpio: timberdale: Fix potential deadlock on &tgpio->lock
- Fix the binding for versaclock3 that was introduced this merge window
so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmUWFIYRHHNib3lkQGtl
cm5lbC5vcmcACgkQrQKIl8bklSWadBAAtcYh03OyGV8qnD6Uqx0SZuFYclXVTk6L
muRUqQ7DwDNO3R5El8lHxpMF4fclBUwiZ8eFlsdabK5xyhVZOnPJYt+DF2n97cMk
XxBg8gnc1JL/mETLUZ2uJ1aXOruDbFhb7QE3cYEkiCZXM9X5zw9yGXd6xG4U7f05
MA81NoidaKPoakA2P9uewrrFEBpLGzSDj8AgQGUiKUX8NKDeaxkm9sDzW1HHlNOz
n3MRqiR46cmVXZhud+rpyqtYXQZY7ullWkvJs+P6qmVTCgtHsgKT4a4l8kkiQk4Q
afJFM2Z2ygH93LSxRjjL7RF7SyeeO4x6fVkTAa7/IBZSznH1uefZcq+kfT+qP226
AMCQ2NhYspucuzP1p/i9ZSwbbaD+u1AmBllENiG2XEBbFErxdcJw36rnmOcDJELm
f9TbX+K8mBvKuQyqX/0CQP8FESSg+7XgTRYuAVuM6aa206o+DhMBhm6S7vaW+SBR
uQaR1b69Kc8ti+qG6f2pyuMpJNgOVbtHnGigELP6MH8NdjfpbOQI1/6PZWORoGfI
VX7M3uG6uS5fp8DFDnMLw3nPEiidZ6KHMIrk71MbZ3eYCedfe3/11tMUxF30+85m
FXE9jF5I6yN+fMdVurwn3qJk5LZrSeRMiSeCFBOTzLHrFL0RGXoa/kGPzvEDxchL
R8MmTwtJfD4=
=RdLn
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A bunch of clk driver fixes for issues found recently:
- Fix the binding for versaclock3 that was introduced this merge
window so we know what the values are for clk consumers
- Fix a 64-bit division issue in the versaclock3 driver
- Avoid breakage in the versaclock3 driver by rejiggering the enums
used to layout clks
- Fix the parent name of a clk in the Spreadtrum ums512 clk driver
- Fix a suspend/resume issue in Skyworks Si521xx clk driver where
regmap restoration fails because writes are wedged
- Return zero from Tegra bpmp recalc_rate() implementation when an
error occurs so we don't consider an error as a large rate"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
clk: sprd: Fix thm_parents incorrect configuration
clk: vc3: Make vc3_clk_mux enum values based on vc3_clk enum values
clk: vc3: Fix output clock mapping
clk: vc3: Fix 64 by 64 division
dt-bindings: clock: versaclock3: Add description for #clock-cells property
- fix build warnings from builds performed with W=1
-----BEGIN PGP SIGNATURE-----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=+MGs
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
- fix build warnings from builds performed with W=1
* tag 'xtensa-20230928' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: boot/lib: fix function prototypes
xtensa: umulsidi3: fix conditional expression
xtensa: boot: don't add include-dirs
xtensa: iss/network: make functions static
xtensa: tlb: include <asm/tlb.h> for missing prototype
xtensa: hw_breakpoint: include header for missing prototype
xtensa: smp: add headers for missing function prototypes
irqchip: irq-xtensa-mx: include header for missing prototype
xtensa: traps: add <linux/cpu.h> for function prototype
xtensa: stacktrace: include <asm/ftrace.h> for prototype
xtensa: signal: include headers for function prototypes
xtensa: processor.h: add init_arch() prototype
xtensa: ptrace: add prototypes to <asm/ptrace.h>
xtensa: irq: include <asm/traps.h>
xtensa: fault: include <asm/traps.h>
xtensa: add default definition for XCHAL_HAVE_DIV32
This is unionized with the actual link flags, so they can of course be
set and they will be evaluated further down. If not we fail any LINKAT
that has to set option flags.
Fixes: cf30da90bc ("io_uring: add support for IORING_OP_LINKAT")
Cc: stable@vger.kernel.org
Reported-by: Thomas Leonard <talex5@gmail.com>
Link: https://github.com/axboe/liburing/issues/955
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmUVjBMACgkQ+mJfZA7r
E8plzQf/dSxOvhyDvh/WDqT+Vk3aIxoypo7bBHrLyOzbYhdALCSBR70FijRS8OuK
th15AYqUpa+Dqhl8RCTSGX+4aAeudN6pHzwEYMZtF8hwb7DnomcB+ztB853DdUMu
U0NLi5Rc3d138oepTlHuwtKUJzpEqbjZKXUOfLx+GvFKdiM2p8js3LTF1XhAX9Sf
u05xzi2tKjLJbnoxGbUOe9Np3Bqg2ril/HDVm0c7Yc+t98Sly6ZJljV0IA0fexqF
ZFX+Bb4f8YFfqSuih3z1K75GpzEQiT6g2z9qOGWB64qFtAyV/ehpSjKP6fPf10FY
G5I/iWRRf3dW6P9/4x/3W5wF+eZWoA==
=xIyA
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix a panic regression on gen8_ggtt_insert_entries (Matthew Wilcox)
- Fix load issue due to reservation address in ggtt_reserve_guc_top (Javier Pello)
- Fix a possible deadlock with guc busyness worker (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZRWMI1HmUYPGGylp@intel.com
A small set of device specific fixes, the most major one is for the GXP
driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUVfbcACgkQJNaLcl1U
h9CrRAf+PmW5OJYtAsOo987ro01DvIWv5XDhEQjljQB5Dd+qbPL5XvR9cKpk4KUc
kyvsWFS517Z298XItVGp+xDXrllvRjLn1ShUEoisEG8M+j84GN5M/eKw7W1Q7GxX
iPUTdsgKJRhnKxtvuKtCpmBT24Ari54AiPHtS2tyZGJeo9ehdaUG+LIsJS/zzUuh
KqfBBS7Gc9KE9alWqTeIx8Q2/ecVk3LEzdITPnNIkcXRHs2sUWGbs8O/u8ZNoD0F
4+vibLweDQ+SNlYVGjSJAG6Qq9dikIPDZlW+WSv/aGuf4MR1gE6sl97Okwb1q26r
sg6wbt/pDrYHOA33ZzoV5IMvjzsBRQ==
=SQJb
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of device specific fixes, the most major one is for the
GXP driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes"
* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-gxp: BUG: Correct spi write return value
dt-bindings: spi: fsl-imx-cspi: Document missing entries
spi: cs42l43: Remove spurious pm_runtime_disable
-----BEGIN PGP SIGNATURE-----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=g9gX
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix high_memory calculation and module loader errors with latest
binutils"
* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add support for 64_PCREL relocation type
LoongArch: Add support for 32_PCREL relocation type
LoongArch: Define relocation types for ABI v2.10
LoongArch: numa: Fix high_memory calculation
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmUVMw0aHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHCRuA//a/mpqqNgINLX7RPgP+5e
Fd8QWY3XdUVwVmL1KCU991igwLZePTzEqm92CGrystykJRCWvriDYkZlGTHRwj9I
mNqR7bM0cCdlZ5J+/9qr1c6stWoPJQ37NIeO6xkfiBPfjIFi7BvilhzvlgYJ2ww8
C5ADQOiUQ4vuqULZOrUhi6vAAXZozrtiBnhY7Woim6aMk3woznnaD0m6kmlggyi/
Tr/7tg4Eba8RUjN6TQuRBJVTIn2ZVaZ9KUyZC3ehSCSvTZmiC1oNO1aSzKE0vdz4
oUt7ug1yICAZU7+g03VZ+iTQnVhXUZGBqYzYnQXg9CpHXasiaWTejqynT4ugWKrU
vBJ/h7sbjNU9T1UgcuT6vsEqwWBOdPqJFEAj4tJSlDP9lY08MKlTn8l9qIEN5cMA
7kl8J5O3pwtdQAUwJmwppWynW8+jiAuvzN6vDkhNoGN1zgpn4bTLsKCsKy9ZzznN
I62ApFRwkRo8RHViDjA7WR4l+8e/7UYJqf0vl3tBGni7q5tL83ns7wpy0uzqk7W/
loHGJIqAEI/yRCNPFQfyeWBZXJs2faMUbLCpkB0McbIpESWae2vqCZnulgH+ecJ3
BOgvlA1ut8uAljXoI4vWLziZsuO2aMqtUFIhqZjzlYr8YDaz1xodPcN99pQ7mkVq
Arw07BQK6Ur7ThJDbQnFz9I=
=O/EB
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
- fix Alchemy build with MMC support disabled
* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c8 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
not atomic and a suspend PM event may be triggered between them,
casuing scsi_rescan_device() to be called on a suspended device and
in that function blocking while holding the scsi device lock. This
would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:
for (( i=0; i<10; i++ )); do
echo "+2 > /sys/class/rtc/rtc0/wakealarm
echo mem > /sys/power/state
done
that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.
Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.
Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.
Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.
The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.
Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.
For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.
However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.
Commit 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.
Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.
To do this, the following libata helper functions are introduced:
1) ata_dev_power_set_standby():
This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.
For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.
2) ata_dev_power_set_active() and
This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.
For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.
With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620 ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef4108291 ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not. Reduce the problems of
incorrectly using CDL commands on older devices by checking SCSI spec
compliance at SPC-5 (the spec which introduced the command) before
turning on CDL.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZRQglCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYJdAP4rjE8a
/X3Vs7C0PoFDl6HlkN3w4Eeq54vLMmxNez2tywEA6cB3RdwG58g34p8wBt7Lb6UI
1HAIhRub2mpHZyQH0/U=
=qq6Q
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A single fix for libata: older devices don't support command duration
limits (CDL) and some don't support report opcodes, meaning there's no
way to tell if they support the command or not.
Reduce the problems of incorrectly using CDL commands on older devices
by checking SCSI spec compliance at SPC-5 (the spec which introduced
the command) before turning on CDL"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: ata: Do no try to probe for CDL on old drives
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access. (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned. (Jinjie Ruan)
-----BEGIN PGP SIGNATURE-----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=yMVA
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- The new PDS vfio-pci variant driver only supports SR-IOV VF devices
and incorrectly made a direct reference to the physfn field of the
pci_dev. Fix this both by making the Kconfig depend on IOV support
as well as using the correct wrapper for this access (Shixiong Ou)
- Resolve an error path issue where on unwind of the mdev registration
the created kset is not unregistered and the wrong error code is
returned (Jinjie Ruan)
* tag 'vfio-v6.6-rc4' of https://github.com/awilliam/linux-vfio:
vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent()
vfio/pds: Use proper PF device access helper
vfio/pds: Add missing PCI_IOV depends
Bug fix to correct return value of gxp_spi_write function to zero.
Completion of succesful operation should return zero.
Fixes: 730bc8ba5e spi: spi-gxp: Add support for HPE GXP SoCs
Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
Link: https://lore.kernel.org/r/20230920215339.4125856-2-charles.kearney@hpe.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: fuse: Unknown relocation type 109
kmod: radeon: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
kmod: nf_tables: Unknown relocation type 109
This is because the latest upstream binutils replaces a pair of ADD64
and SUB64 with 64_PCREL, so add support for 64_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When build and update kernel with the latest upstream binutils and
loongson3_defconfig, module loader fails with:
kmod: zsmalloc: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: ipmi_msghandler: Unsupport relocation type 99, please add its support.
kmod: pstore: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: drm_display_helper: Unsupport relocation type 99, please add its support.
kmod: fuse: Unsupport relocation type 99, please add its support.
kmod: fat: Unsupport relocation type 99, please add its support.
This is because the latest upstream binutils replaces a pair of ADD32
and SUB32 with 32_PCREL, so add support for 32_PCREL relocation type.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ecb802d02eeb
Cc: <stable@vger.kernel.org>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The relocation types from 101 to 109 are used by GNU binutils >= 2.41,
add their definitions to use them in later patches.
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=include/elf/loongarch.h#l230
Cc: <stable@vger.kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For 64bit kernel without HIGHMEM, high_memory is the virtual address of
the highest physical address in the system. But __va(get_num_physpages()
<< PAGE_SHIFT) is not what we want for high_memory because there may be
holes in the physical address space. On the other hand, max_low_pfn is
calculated from memblock_end_of_DRAM(), which is exactly corresponding
to the highest physical address, so use it for high_memory calculation.
Cc: <stable@vger.kernel.org>
Fixes: d4b6f1562a ("LoongArch: Add Non-Uniform Memory Access (NUMA) support")
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.
This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.
Fixes: 348f3cde84 ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
--> timbgpio_irq_disable()
--> spin_lock_irqsave(&tgpio->lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.
Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.
Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.
This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).
Fixes: 02d5b0aacd ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.
Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.
FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.
FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.
Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.
Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:
[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0
To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
Since I will continue to work on Nouveau consistently, also beyond my
former and still ongoing VM_BIND/EXEC work, add myself to the list of
Nouveau maintainers.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926014913.7721-1-dakr@redhat.com
* Remove double allocation of wq_update_pod_attrs_buf.
* Fix missing allocation of pwq_release_worker when
wq_cpu_intensive_thresh_us is set to a custom value.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZRHSyg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbNYAP93prDoDUYHLha4NAXyZJ441+bBA5jnOOdRYLiw
cd0yugEAgFzQQ/4Z6wKosdwiGdrSn33IAgnDCGdAXVWzbyM+wQU=
=968G
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Remove double allocation of wq_update_pod_attrs_buf
- Fix missing allocation of pwq_release_worker when
wq_cpu_intensive_thresh_us is set to a custom value
* tag 'wq-for-6.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix missed pwq_release_worker creation in wq_cpu_intensive_thresh_init()
workqueue: Removed double allocation of wq_update_pod_attrs_buf
Ideally the busyness worker should take a gt pm wakeref because the
worker only needs to be active while gt is awake. However, the gt_park
path cancels the worker synchronously and this complicates the flow if
the worker is also running at the same time. The cancel waits for the
worker and when the worker releases the wakeref, that would call gt_park
and would lead to a deadlock.
The resolution is to take the global pm wakeref if runtime pm is already
active. If not, we don't need to update the busyness stats as the stats
would already be updated when the gt was parked.
Note:
- We do not requeue the worker if we cannot take a reference to runtime
pm since intel_guc_busyness_unpark would requeue the worker in the
resume path.
- If the gt was parked longer than time taken for GT timestamp to roll
over, we ignore those rollovers since we don't care about tracking the
exact GT time. We only care about roll overs when the gt is active and
running workloads.
- There is a window of time between gt_park and runtime suspend, where
the worker may run. This is acceptable since the worker will not find
any new data to update busyness.
v2: (Daniele)
- Edit commit message and code comment
- Use runtime pm in the worker
- Put runtime pm after enabling the worker
- Use Link tag and add Fixes tag
v3: (Daniele)
- Reword commit and comments and add details
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7077
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925192117.2497058-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit e2f99b79d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is an assertion in ggtt_reserve_guc_top that the global GTT
is of size at least GUC_GGTT_TOP, which is not the case on a 32-bit
platform; see commit 562d55d991
("drm/i915/bdw: Only use 2g GGTT for 32b platforms"). If GEM_BUG_ON
is enabled, this triggers a BUG(); if GEM_BUG_ON is disabled, the
subsequent reservation fails and the driver fails to initialise
the device:
i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Failed to reserve top of GGTT for GuC
i915 0000:00:02.0: Device initialization failed (-28)
i915 0000:00:02.0: Please file a bug on drm/i915; see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details.
i915: probe of 0000:00:02.0 failed with error -28
Make the reservation at the top of the available space, whatever
that is, instead of assuming that the top will be GUC_GGTT_TOP.
Fixes: 911800765e ("drm/i915/uc: Reserve upper range of GGTT")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9080
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Fernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230902171039.2229126186d697dbcf62d6d8@otheo.eu
(cherry picked from commit 0f3fa942d9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The folio conversion changed the behaviour of shmem_sg_alloc_table() to
put the entire length of the last folio into the sg list, even if the sg
list should have been shorter. gen8_ggtt_insert_entries() relied on the
list being the right length and would overrun the end of the page tables.
Other functions may also have been affected.
Clamp the length of the last entry in the sg list to be the expected
length.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 0b62af28f2 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Cc: stable@vger.kernel.org # 6.5.x
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9256
Link: https://lore.kernel.org/lkml/6287208.lOV4Wx5bFT@natalenko.name/
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919194855.347582-1-willy@infradead.org
(cherry picked from commit 26a8e32e6d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----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=6WEW
-----END PGP SIGNATURE-----
Merge tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- delayed refs fixes:
- fix race when refilling delayed refs block reserve
- prevent transaction block reserve underflow when starting
transaction
- error message and value adjustments
- fix build warnings with CONFIG_CC_OPTIMIZE_FOR_SIZE and
-Wmaybe-uninitialized
- fix for smatch report where uninitialized data from invalid extent
buffer range could be returned to the caller
- fix numeric overflow in statfs when calculating lower threshold
for a full filesystem
* tag 'for-6.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize start_slot in btrfs_log_prealloc_extents
btrfs: make sure to initialize start and len in find_free_dev_extent
btrfs: reset destination buffer when read_extent_buffer() gets invalid range
btrfs: properly report 0 avail for very full file systems
btrfs: log message if extent item not found when running delayed extent op
btrfs: remove redundant BUG_ON() from __btrfs_inc_extent_ref()
btrfs: return -EUCLEAN for delayed tree ref with a ref count not equals to 1
btrfs: prevent transaction block reserve underflow when starting transaction
btrfs: fix race when refilling delayed refs block reserve
This kselftest fixes update for Linux 6.6-rc4 consists of one
single fix to unmount tracefs when test created mount.
-----BEGIN PGP SIGNATURE-----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=5LK8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZRKHuAAKCRCRxhvAZXjc
ohOLAQDU9Fxq5UdqCdmsyi/b24XJFZlQhcVIZy2Hrhcor9TiVQEAjuECGlxFPSgj
atVOWLdugDJquiHextqTEMgIecJpNw4=
=uINF
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains the usual miscellaneous fixes and cleanups for vfs and
individual fses:
Fixes:
- Revert ki_pos on error from buffered writes for direct io fallback
- Add missing documentation for block device and superblock handling
for changes merged this cycle
- Fix reiserfs flexible array usage
- Ensure that overlayfs sets ctime when setting mtime and atime
- Disable deferred caller completions with overlayfs writes until
proper support exists
Cleanups:
- Remove duplicate initialization in pipe code
- Annotate aio kioctx_table with __counted_by"
* tag 'v6.6-rc4.vfs.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
overlayfs: set ctime when setting mtime and atime
ntfs3: put resources during ntfs_fill_super()
ovl: disable IOCB_DIO_CALLER_COMP
porting: document superblock as block device holder
porting: document new block device opening order
fs/pipe: remove duplicate "offset" initializer
fs-writeback: do not requeue a clean inode having skipped pages
aio: Annotate struct kioctx_table with __counted_by
direct_write_fallback(): on error revert the ->ki_pos update from buffered write
reiserfs: Replace 1-element array with C99 style flex-array
Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZRIFKAAKCRCMstVUGiXM
g/pXAP9HLB2s+beBTK5iQU4/NfqmAVSl303QCoR9xLByo38vfAEAlLiRIh061pTi
PRlXVuY9bUQPyCSYsiBHv/fmLqdQdwU=
=ti6G
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Build:
- Update header files in the tools/**/include directory to sync with
the kernel sources as usual.
- Remove unused bpf-prologue files. While it's not strictly a fix,
but the functionality was removed in this cycle so better to get
rid of the code together.
- Other minor build fixes.
Misc:
- Fix uninitialized memory access in PMU parsing code
- Fix segfaults on software event"
* tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf jevent: fix core dump on software events on s390
perf pmu: Ensure all alias variables are initialized
perf jevents metric: Fix type of strcmp_cpuid_str
perf trace: Avoid compile error wrt redefining bool
perf bpf-prologue: Remove unused file
tools headers UAPI: Update tools's copy of drm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf bench sched-seccomp-notify: Use the tools copy of seccomp.h UAPI
tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older systems
tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack syscalls with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
