IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for Microchip OTP controller available on SAMA7G5. The OTPC
controls the access to a non-volatile memory. The memory behind OTPC is
organized into packets, packets are composed by a fixed length header
(4 bytes long) and a variable length payload (payload length is available
in the header). When software request the data at an offset in memory
the OTPC will return (via header + data registers) the whole packet that
has a word at that offset. For the OTP memory layout like below:
offset OTP Memory layout
. .
. ... .
. .
0x0E +-----------+ <--- packet X
| header X |
0x12 +-----------+
| payload X |
0x16 | |
| |
0x1A | |
+-----------+
. .
. ... .
. .
if user requests data at address 0x16 the data started at 0x0E will be
returned by controller. User will be able to fetch the whole packet
starting at 0x0E (or parts of the packet) via proper registers. The same
packet will be returned if software request the data at offset 0x0E or
0x12 or 0x1A.
The OTP will be populated by Microchip with at least 2 packets first one
being boot configuration packet and the 2nd one being temperature
calibration packet. The packet order will be preserved b/w different chip
revisions but the packet sizes may change.
For the above reasons and to keep the same software able to work on all
chip variants the read function of the driver is working with a packet
id instead of an offset in OTP memory.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706100627.6534-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patchset in [1] exported some definitions to binder_internal.h in
order to make the debugfs entries such as 'stats' and 'transaction_log'
available in a binderfs instance. However, the DEFINE_SHOW_ATTRIBUTE
macro expands into a static function/variable pair, which in turn get
redefined each time a source file includes this internal header.
This problem was made evident after a report from the kernel test robot
<lkp@intel.com> where several W=1 build warnings are seen in downstream
kernels. See the following example:
include/../drivers/android/binder_internal.h:111:23: warning: 'binder_stats_fops' defined but not used [-Wunused-const-variable=]
111 | DEFINE_SHOW_ATTRIBUTE(binder_stats);
| ^~~~~~~~~~~~
include/linux/seq_file.h:174:37: note: in definition of macro 'DEFINE_SHOW_ATTRIBUTE'
174 | static const struct file_operations __name ## _fops = { \
| ^~~~~~
This patch fixes the above issues by moving back the definitions into
binder.c and instead creates an array of the debugfs entries which is
more convenient to share with binderfs and iterate through.
[1] https://lore.kernel.org/all/20190903161655.107408-1-hridya@google.com/
Fixes: 0e13e452dafc ("binder: Add stats, state and transactions files")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220701182041.2134313-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
see warnings:
| drivers/misc/eeprom/idt_89hpesx.c:570:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:579:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:814:4: error: format specifies type
| 'unsigned short' but the argument has type 'unsigned int'
| [-Werror,-Wformat] CSR_REAL_ADDR(csraddr));
There's an ongoing movement to eventually enable the -Wformat flag for
clang. See: https://github.com/ClangBuiltLinux/linux/issues/378
The format specifier for idt_89hpesx.c:570 and 579 was `0x%02hhx`. The
part we care about `%hhx` describes a single byte format, wherein the
leftmost byte of our u16 type (of which memaddr is) is truncated.
example:
```
uint16_t x = 0xbabe;
printf("%hhx\n", x);
// output is: be
// we lost 'ba'
```
There exists a similar issue at idt_89hpesx.c:814 which involves the
CSR_REAL_ADDR macro. This macro returns a u16 but due to default
argument promotion for variadic functions (printf-like) actually
provides an int to the dev_err method.
My proposed solution is to expand the width of the format specifier to
fully encompass the provided argument (which is promoted to an int, see
below). I opted for '%x' as this specifies an unsigned hexadecimal
integer which, with a guarantee, can represent all the values of a u16.
As per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20220701232031.2639134-1-justinstitt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706101131.6934-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Trace Hub in Raptor Lake-S CPU.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Trace Hub in Raptor Lake-S PCH.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Trace Hub in Meteor Lake-P.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
> RIP: msc_mmap_fault [intel_th_msu]
> Call Trace:
> <TASK>
> __do_fault
> do_fault
...
Fix this by accounting for vmalloc possibility.
Fixes: ba39bd830605 ("intel_th: msu: Switch over to scatterlist")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of dma_alloc_coherent() needs to be checked.
To avoid use of null pointer in sg_set_buf() in case of the failure of
alloc.
Fixes: f220df66f676 ("intel_th: msu-sink: An example msu buffer "sink"")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs after calling 'pci_alloc_irq_vectors()',
'pci_free_irq_vectors()' must be called as already done in the remove
function.
Fixes: 7b7036d47c35 ("intel_th: pci: Use MSI interrupt signalling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's more cleanly to use for_each_set_bit() instead of opencoding it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220704125044.2192381-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless cast in a bitmap_empty() call.
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ef49726d60f6a531428609f60a2398b6c3d9a26e.1656966181.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.
This allows for certain sleep-sensitive code (wireguard/rng) to
decide on what preparatory work should be performed (or not) in
their pm_notification callbacks.
This patch was prompted by the discussion at [1] which attempts
to remove CONFIG_ANDROID that currently guards these code paths.
[1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uacce driver must deal with a possible removal of the parent device
or parent driver module rmmod at any time.
Although uacce_remove(), called on device removal and on driver unbind,
prevents future use of the uacce fops by removing the cdev, fops that
were called before that point may still be running.
Serialize uacce_fops_open() and uacce_remove() with uacce->mutex.
Serialize other fops against uacce_remove() with q->mutex.
Since we need to protect uacce_fops_poll() which gets called on the fast
path, replace uacce->queues_lock with q->mutex to improve scalability.
The other fops are only used during setup.
uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes
whether uacce_remove() has disabled all queues. If that is the case,
don't go any further since the parent device is being removed and
uacce->ops should not be called anymore.
Reported-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tools directory in generating tags and quiet the "No such file or
directory" warnings.
It reverts the changes introduced in commit 162343a876f1
("scripts/tags.sh: exclude tools directory from tags generation") while
maintainig the original intent of the patch to get rid of the warnings.
This allows the root level cscope files to include tools source code
besides kernel and a single place to browse the code for both.
Acked-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20220618005457.2379324-1-vipinsh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I've been contributing patches for binder{,fs} targeting fixes as well
as new functionality. I've also helped reviewing some of the incoming
changes. As such I'd like to be added to the maintainers list for the
Android drivers. Note I'm also dropping Hridya's name from the list as
she has now moved to a different role.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220627194753.2309523-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds missing documentation for VDUSE sysfs interface ABI
under Documentation/ABI/testing.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220524115143.187-1-xieyongji@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs after a successful idr_alloc() call, the corresponding
resource must be released with idr_remove() as already done in the .remove
function.
Update the error handling path to add the missing idr_remove() call.
Fixes: ada8a8a13b13 ("mfd: Add realtek pcie card reader driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e8dc41716cbf52fb37a12e70d8972848e69df6d6.1655271216.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the target process is busy, incoming oneway transactions are
queued in the async_todo list. If the clients continue sending extra
oneway transactions while the target process is frozen, this queue can
become too large to accommodate new transactions. That's why binder
driver introduced ONEWAY_SPAM_DETECTION to detect this situation. It's
helpful to debug the async binder buffer exhausting issue, but the
issue itself isn't solved directly.
In real cases applications are designed to send oneway transactions
repeatedly, delivering updated inforamtion to the target process.
Typical examples are Wi-Fi signal strength and some real time sensor
data. Even if the apps might only care about the lastet information,
all outdated oneway transactions are still accumulated there until the
frozen process is thawed later. For this kind of situations, there's
no existing method to skip those outdated transactions and deliver the
latest one only.
This patch introduces a new transaction flag TF_UPDATE_TXN. To use it,
use apps can set this new flag along with TF_ONE_WAY. When such an
oneway transaction is to be queued into the async_todo list of a frozen
process, binder driver will check if any previous pending transactions
can be superseded by comparing their code, flags and target node. If
such an outdated pending transaction is found, the latest transaction
will supersede that outdated one. This effectively prevents the async
binder buffer running out and saves unnecessary binder read workloads.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Li Li <dualli@google.com>
Link: https://lore.kernel.org/r/20220526220018.3334775-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a pointer being initialized with a zero, use NULL instead.
Cleans up sparse warning:
drivers/misc/lkdtm/cfi.c💯27: warning: Using plain integer as NULL pointer
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220612202708.2754270-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/misc/cxl/cxl.h
line: 1107
+/* check if the given pci_dev is on the the cxl vphb bus */
changed to
+/* check if the given pci_dev is on the cxl vphb bus */
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621125321.122280-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/misc/sgi-xp/xpc_uv.c
line: 1601
* to put the the msg_slot back on the free list.
changed to
* to put the msg_slot back on the free list.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621124840.119875-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/char/apm-emulation.c
line: 547
* Wait for the the suspend_acks_pending variable to drop to
changed to
* Wait for the suspend_acks_pending variable to drop to
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621115310.110740-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/misc/sgi-gru/grukservices.c
line: 39
* reserved whenever the the kernel context for the blade is loaded. Note
changed to
* reserved whenever the kernel context for the blade is loaded. Note
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220621123203.118488-1-jiangjian@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
speakupmap.h was not actually intended to be source code, speakupmap.map
is.
This resurrects the makemapdata.c and genmap.c tools to generate
speakupmap.h automatically from the input and speakup headers, and the
speakupmap.map keyboard mapping source file.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20220612172244.il3siyq7ueqnvah5@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of fixes have accumulated, but they are largely for
harmless issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for
different firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect
data in DT nodes
- Three updates to the MAINTAINERS file, including Florian
Fainelli taking over BCM283x/BCM2711 (Raspberry Pi)
from Nicolas Saenz Julienne
-----BEGIN PGP SIGNATURE-----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=Js9H
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Fixes for post-5.18 changes:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes pre-5.18 material:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYri4RgAKCRDdBJ7gKXxA
jmhsAQDCvGqtIUhgkTwid8KBRNbowsg0LXd6k+gUjcxBhH403wEA0r0cxxkDAmgr
QNXn/qZRzQP2ji+pdjH9NBOsd2g2XQA=
=UGJ7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
- Enable ignore_missing_thread in 'perf stat', enabling counting with '--pid'
when threads disappear during counting session setup.
- Adjust output data offset for backward compatibility in 'perf inject'.
- Fix missing free in copy_kcore_dir() in 'perf inject'.
- Fix caching files with a wrong build ID.
- Sync drm, cpufeatures, vhost and svn headers with the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYridUwAKCRCyPKLppCJ+
JwQXAQCsoW6NcgFW1LOW2XPYQkyhMVmUpDJErqTM9DKHMV2qVAD/dOWvXTff6lh0
ylXTqemsDUX56ATy5CAQKY0w1T3t4QY=
=xRzi
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
-----BEGIN PGP SIGNATURE-----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=rUrf
-----END PGP SIGNATURE-----
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
-----BEGIN PGP SIGNATURE-----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=Qrcs
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- pass the correct size to dma_set_encrypted() when freeing memory
(Dexuan Cui)
* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: use the correct size for dma_set_encrypted()
Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and documentation
updates to the cirrusfb, skeletonfb, omapfb, intelfb, au1100fb and
simplefb drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYrhzewAKCRD3ErUQojoP
Xxp/AQD3JaXqxHMuVDiHBNfzBnE1TbZrVWXf4o2bQ1Yyt87iAgD+OpMt0wgUWn6C
sTfla6csj985kXFLxfDu/qFbt6QFpQ0=
=ofQw
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and
documentation updates to the cirrusfb, skeletonfb, omapfb,
intelfb, au1100fb and simplefb drivers"
* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Remove duplicate 'the' in comment
video: fbdev: omapfb: Align '*' in comment
video: fbdev: simplefb: Check before clk_put() not needed
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
video: fbdev: skeletonfb: Convert to generic power management
video: fbdev: cirrusfb: Remove useless reference to PCI power management
video: fbdev: intelfb: Initialize value of stolen size
video: fbdev: intelfb: Use aperture size from pci_resource_len
video: fbdev: skeletonfb: Fix syntax errors in comments
Three important fixes:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines via
flushing the whole data cache. This may slow down such machines but
makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYrht4AAKCRD3ErUQojoP
Xz02AQCATPX+1w1GiAVO+d61X1XaehPaDQnZnpwPYK5N06GLEQEA/HT1PVD1mvyv
secS+8PDsSHLMPfE3WD7hYKwiK73igM=
=glnu
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmK4N68THGpjbXZia2Jj
QGdtYWlsLmNvbQAKCRBR+cyR+D+gRN+yEACSztL1D2tBB9ZDtsyqdZPgTtz3pxFB
tlQ07oWrPWxBCQdzNcE6iw1ObUxLfy/kgl+o0iy49YhTyNVBE211SdKPR1l47Ozr
n2IqHpXPESsACwx4YxHiRx+BWpaBnVzgqQMLteFgrq3mlLq5dDxskkmJ8LVfV9Ka
QO/f1HGTJ/m6rLH0zwNBgc9wF7E4qpgQI4KKIfWitopAlMhdb+aguzJX/PYDljM8
h4bBgZy/CF8eKaTP+eU6DU7LzPrZyp0NYRdS2ER67szdXnNhBJT8SH04UOiqv0cs
LtWqTh6hADNnZMUW4MwGmxnop1GCvBgZNtu+MHC5RvIeWKhXthz0zSnqpR2AAiWb
B+EQiZlNZxAahYRpgLaU2lSHH9uR+fZhls0mjE/PKxbAF5j1Jn4dMfGZGJYkATQe
ViaqaiepY5axDPvDZUFLMHYerNVHSf25wBiU8uW4FaOm2XYPj+zShfuXI4FL2M7E
FTxMEU2+rYwWOSWGjv3tA62dBaF9cJ6pbVp6AKSspHHYbObHpiXE333Jforv/l3h
Dq1C4vWx7ZNN/1vrMLAt42zDRNHIo6EdGimVCag3dODAnq6jWPX212zVSDIN2a0B
VntqpEkOlI7PW02xnbR7eb7YJu1c9Rj8dRHoNAv1M/J0O2xlcCZNfT5KbqQaudaS
t4k7h9yQmfXbSA==
=Xd/h
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: change '.bss' to '.section .bss'
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
- A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications rely on.
- A change to our execve path, to make the execve syscall exit tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're available for use in
the initial seeding in random_init().
- A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason A. Donenfeld,
Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, Zi Yan.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmK3qZITHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgBK8D/40Jyn/AJdTXstysP3cNMiQh/Ttjq/d
UlYBIdNu5C/BwSZKXl0q0UtrvvTAZsLKfvNIl/xdGHDoCKYF7ckG4aURc+Uhh4Dw
+/uPYi7Ompfwt5xIjOwOpocYX3dGbhoECB4J0H8kW9cLFpxAsw17sCH9mPcRXFMp
BEYdnbCmDpdBLvX/fI6YI4sHenqhyxCPwU/m0rbRD4DZI7qaS70wc8hwt4KNeo72
1xt+q6491sh1xmyA6UzE2Sz8ZeLgdppwrfg6uPbRtPwVNV4zUFfPVxXbYZE2k1VZ
tJm/54w5R+2qeuQAstcRxjegPSostG55/WonDIV4IpAHk4f29DnRgUJZaSR1WvP0
ebScLjk7/rXTbqB5MpSITII6F39JKzpIMny6nZw8qZBpeRx4s1RZYLu8nTIspd1t
qr1l0RxGAudJbU8xZMH8b8VYoQGyXfPx/RZ7Qi9ZR8FqQtB9fTPTdxsEv88cSmIV
uVif+H5zDe29mvhmCP/KhclmFl9JxwT2SFxgrUPwwhBk3JEIFaSMFLjYp1WpQ+z6
Dehv0k9DIuR9MsiZX/+vLszQkEsGvTs4zMHEHCOY67dA2WJaEES14Ya9nWzowuGM
/9N0zJ+BiZr6KoZ96W9m+WN29LlwNC/RYuqXtfpdtbxW0vjhZc9A82Ltydxb9EkJ
mOzaSMbx3OO/0g==
=n88O
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a CMA change that broke booting guests with > 2G RAM on
Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications
rely on.
- A change to our execve path, to make the execve syscall exit
tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're
available for use in the initial seeding in random_init().
- A build fix for when KASAN is enabled along with
STRUCTLEAK_BYREF_ALL.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.
* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: wire up rng during setup_arch
powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
powerpc/pseries: wire up rng during setup_arch()
powerpc/microwatt: wire up rng during setup_arch()
powerpc/mm: Move CMA reservations after initmem_init()
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
-----BEGIN PGP SIGNATURE-----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=PnXQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Ignore __this_module in gen_autoksyms.sh
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Documentation/llvm: Update Supported Arch table
modpost: fix section mismatch check for exported init/exit sections
- Use updated exfat_chain directly instead of snapshot values in rename.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE6NzKS6Uv/XAAGHgyZwv7A1FEIQgFAmK3ryYWHGxpbmtpbmpl
b25Aa2VybmVsLm9yZwAKCRBnC/sDUUQhCLBLEADQV1zAIN3/NwvrHlsB/8fUDLoM
DgnAfvGSQ61A5DYpx3clo5BtvpRhQIj22/3Jj3AMcUDXUkrEvsgLe1R7tQ6xUu/w
PXwDPU89F5hI/nviyJYB6g8EjpWctzvbkkgR9eJO6ZxBna7VYHpz3tljnciW9slR
v4tPD7iSlhaMkb+3qO4ll3LvMx1uKRUATu1C9sh5YbesYAN6A3De6fcSi7lPuXKN
JefjWOWQEir+/9Hcrjxz/FNOdYzKS6CSE4ps6AJx+mqXkChcWLgwp5+Q+oDOYnAG
SQ9Tk2pW37Ba7+WlM9HJc5vM2j1a0Ww4HFQEqAG/yzQmP1N97mX4Jv3/9nao0ojY
OUEchgVIutPojFK1ykXUd4RZSDkLPq+LREtfQ++gfO2/oKlDhS6TwXYMg3Tg5kW5
q8TIWXzfd+waYCcHtP4MGsh6dVGT15REukbKHzFb6X+e/R1f9cGnI6a68187eDb5
bewEw/zIwx3GH8UT1k4sjwxvkGFln/HuAS11g5cLbcYG/htSehY1u/ir4ddmNn2u
bRpUe0KuyzZfBdJ2bvOWJ37P7n4YOweRWudjMOIGENS5NwLFb4zd64NwHzklUmiw
cpwMsaMxzzOdmf9TobjJ0ioRNh9eiltaxBme1KK22tJSNfGG/6+UnxryKLMFc5Rd
8KBPcuD8/rOKYdIi4Q==
=GSFP
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fix from Namjae Jeon:
- Use updated exfat_chain directly instead of snapshot values in
rename.
* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use updated exfat_chain directly during renaming
-----BEGIN PGP SIGNATURE-----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=Y554
-----END PGP SIGNATURE-----
Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
To pick up the changes from:
d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs")
0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit")
cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support")
That gets these new SVM exit reasons:
+ { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \
+ { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \
+ { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+ { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \
+ { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
This causes these changes:
CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o
LD /tmp/build/perf-urgent/arch/x86/perf-in.o
LD /tmp/build/perf-urgent/arch/perf-in.o
LD /tmp/build/perf-urgent/perf-in.o
LINK /tmp/build/perf-urgent/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID")
2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id")
a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-06-26 12:04:35.982003781 -0300
+++ after 2022-06-26 12:04:43.819972476 -0300
@@ -28,6 +28,7 @@
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
+ [0x7C] = "VDPA_SET_GROUP_ASID",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
@@ -39,5 +40,8 @@
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
[0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x7A] = "VDPA_GET_AS_NUM",
+ [0x7B] = "VDPA_GET_VRING_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
+ [0x81] = "VDPA_GET_GROUP_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.
Committer notes:
And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:
ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option")
---
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.
This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some reason using:
cat <<EoFuncBegin
static const char *errno_to_name__$arch(int err)
{
switch (err) {
EoFuncBegin
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
