IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support to inet v4 raw sockets for binding to nonlocal addresses
through the IP_FREEBIND and IP_TRANSPARENT socket options, as well as
the ipv4.ip_nonlocal_bind kernel parameter.
Add helper function to inet_sock.h to check for bind address validity on
the base of the address type and whether nonlocal address are enabled
for the socket via any of the sockopts/sysctl, deduplicating checks in
ipv4/ping.c, ipv4/af_inet.c, ipv6/af_inet6.c (for mapped v4->v6
addresses), and ipv4/raw.c.
Add test cases with IP[V6]_FREEBIND verifying that both v4 and v6 raw
sockets support binding to nonlocal addresses after the change. Add
necessary support for the test cases to nettest.
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211117090010.125393-1-pbl@bestov.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.
The first site is nci_send_cmd(), which can happen after the
nci_close_device as below
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
flush_workqueue |
del_timer_sync |
nci_unregister_device | nfc_get_device
destroy_workqueue | nfc_dev_up
nfc_unregister_device | nci_dev_up
device_del | nci_open_device
| __nci_request
| nci_send_cmd
| queue_work !!!
Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.
... | ...
nci_unregister_device | queue_work
destroy_workqueue |
nfc_unregister_device | ...
device_del | nci_cmd_work
| mod_timer
| ...
| nci_cmd_timer
| queue_work !!!
For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152732.19238-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a potential UAF between the unregistration routine and the NFC
netlink operations.
The race that cause that UAF can be shown as below:
(FREE) | (USE)
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
nci_unregister_device | nfc_get_device
nfc_unregister_device | nfc_dev_up
rfkill_destory |
device_del | rfkill_blocked
... | ...
The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.
This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a possible data race as shown below:
thread-A in nci_request() | thread-B in nci_close_device()
| mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
... | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock); |
|
This race will allow __nci_request() to be awaked while the device is
getting removed.
Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.
Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.
Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
* Various other bugs all over the place.
-----BEGIN PGP SIGNATURE-----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=/Vqx
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- The current iomap_file_buffered_write behavior of failing the entire
write when part of the user buffer cannot be faulted in leads to an
endless loop in gfs2. Work around that in gfs2 for now.
- Various other bugs all over the place.
* tag 'gfs2-v5.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Prevent endless loops in gfs2_file_buffered_write
gfs2: Fix "Introduce flag for glock holder auto-demotion"
gfs2: Fix length of holes reported at end-of-file
gfs2: release iopen glock early in evict
gfs2: Fix atomic bug in gfs2_instantiate
gfs2: Only dereference i->iov when iter_is_iovec(i)
-----BEGIN PGP SIGNATURE-----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=beJ8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"This is just one bugfix for a buffer overflow in knfsd's xdr decoding"
* tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux:
NFSD: Fix exposure in nfsd4_decode_bitmap()
This is needed for some arches, as reported by Geert Uytterhoeven,
Randy Dunlap and Stephen Rothwell
Fixes: 4721031c3559 ("net: move gro definitions to include/net/gro.h")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211117100130.2368319-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide improved mailbox communication, between PF and VF,
which is defined as API version 1.5.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Improve reliability of the mailbox communication and remove
its potential flaws that may lead to the undefined or faulty behavior.
Recently some users reported issues on ESX with 10G Intel NICs which were
found to be caused by incorrect implementation of the PF-VF mailbox
communication.
Technical investigation highlighted areas to improve in the communication
between PF or VF that wants to send the message (sender) and the other
part which receives the message (receiver):
- Locking the mailbox when the sender wants to send a message
- Releasing the mailbox when the communication ends
- Returning the result of the mailbox message execution
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add legacy suffix to mailbox functions which should be backwards compatible
with older PF drivers. Communication during API negotiation always has to
be done using the earlier implementation.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new handling for error codes:
IXGBE_ERR_CONFIG - ixgbe_mbx_operations is not correctly set
IXGBE_ERR_TIMEOUT - mailbox operation, e.g. poll for message, timeout
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is name similarity within IXGBE_VT_MSGTYPE_ACK and
PFMAILBOX.ACK / VFMAILBOX.ACK. MSGTYPE macros are renamed to SUCCESS and
FAILURE because they are not specified in datasheet and now will be
easily distinguishable.
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Eric Dumazet says:
====================
net: make dev_watchdog() less intrusive
dev_watchdog() is used on many NIC to periodically monitor TX queues
to detect hangs.
Problem is : It stops all queues, then check them, then 'unfreeze' them.
Not only this stops feeding the NIC, it also migrates all qdiscs
to be serviced on the cpu calling netif_tx_unlock(), causing
a potential latency artifact.
With many TX queues, this is becoming more visible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no reason for stopping all TX queues from dev_watchdog()
Not only this stops feeding the NIC, it also migrates all qdiscs
to be serviced on the cpu calling netif_tx_unlock(), causing
a potential latency artifact.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are not fast path, there is no point in inlining them.
Also provide netif_freeze_queues()/netif_unfreeze_queues()
so that we can use them from dev_watchdog() in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In following patches, dev_watchdog() will no longer stop all queues.
It will read queue->trans_start locklessly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tx_timeout_show() assumed dev_watchdog() would stop all
the queues, to fetch queue->trans_timeout under protection
of the queue->_xmit_lock.
As we want to no longer disrupt transmits, we use an
atomic_long_t instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: david decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the values of EVENT_* constants from bit masks to bit numbers as
accepted by {clear,set,test}_bit() functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.
This is due to the comparison
if (skb->len - p_off > gso_size)
not properly accounting for the transport layer header.
p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.
gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.
Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.
Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500. skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473. Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.
Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.
Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original
Realtek USB ethernet chip ID 0bda:8153.
Lenovo Docks always use their own IDs for usb hub, even for older Docks.
If parent hub is from Lenovo, then r8152 should try MAC passthrough.
Verified on Lenovo TBT3 dock too.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the used PHYs also support hardware timestamping, all configuration requests
should be forwared to the PHYs instead of being processed by the MAC driver
itself.
This enables PHY timestamping in combination with the cpsw driver.
Tested with an am335x based board with two DP83640 PHYs connected to the cpsw
switch.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update net_failover documentation with missing and incomplete
details to get a proper working setup.
Signed-off-by: Vasudev Kamath <vasudev@copyninja.info>
Reviewed-by: Krishna Kumar <krikku@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cross-reference for the handbooks section works. However, it is
meant to describe the path inside the Kernel's doc where the section
is, but there's an space instead of a dash, plus it lacks the .rst at
the end, which makes:
./scripts/documentation-file-ref-check
to complain.
Fixes: 604370e106cc ("Documentation/process: Add maintainer handbooks section")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The file name: accounting/delay-accounting.rst
should be, instead: Documentation/accounting/delay-accounting.rst.
Also, there's no need to use doc:`foo`, as automarkup.py will
automatically handle plain text mentions to Documentation/
files.
So, update its cross-reference accordingly.
Fixes: fcb501704554 ("delayacct: Document task_delayacct sysctl")
Fixes: c3123552aad3 ("docs: accounting: convert to ReST")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Russell King says:
====================
net: ocelot_net: phylink validate implementation updates
This series converts ocelot_net to fill in the supported_interfaces
member of phylink_config, cleans up the validate() implementation,
and then converts to phylink_generic_validate().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ocelot_net has no special behaviour in its validation implementation, so
can be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode in the
validation function. Remove this to simplify it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy interface mode bitmap for the MSCC Ocelot driver with
the interface modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: mtk_eth_soc: phylink validate implementation updates
This series converts mtk_eth_soc to fill in the supported_interfaces
member of phylink_config, cleans up the validate() implementation, and
then converts to phylink_generic_validate().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mtk_eth_soc has no special behaviour in its validation implementation,
so can be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function, and we can also get rid of our hack to indicate
both 1000base-X and 2500base-X if the comphy is present to make that
work. Remove this hack and use of phylink_helper_basex_speed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy interface mode bitmap for the Mediatek driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: sparx5: phylink validate implementation updates
This series converts sparx5 to fill in the supported_interfaces member
of phylink_config, cleans up the validate() implementation, and then
converts to phylink_generic_validate().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparx5 has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
