IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Enable usage of predefined transfer func in addition to shaper 1D LUT.
That means we can save some complexity by just setting a predefined
curve, instead of programming a custom curve when preparing color space
for applying 3D LUT.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Map DC shaper LUT to DM plane color management. Shaper LUT can be used
to delinearize and/or normalize the color space for computational
efficiency and achiving specific visual styles. If a plane degamma is
apply to linearize the color space, a custom shaper 1D LUT can be used
just before applying 3D LUT.
v2:
- use DPP color caps to verify plane 3D LUT support
- add debug message if shaper LUT programming fails
v4:
- remove helper to check 3D LUT color caps (Harry)
- update desc of lut3d-setup helper from MPC to DPP
v5:
- remove color_mgmt_changed check that prevents color updates (Joshua)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With `dc_fixpt_from_s3132()` translation, we can just use it to set
hdr_mult.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Detach value translation from CTM to reuse it for programming HDR
multiplier property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC only has pre-blending degamma caps (plane/DPP) that is currently in
use for CRTC/post-blending degamma, so that we don't have HW caps to
perform plane and CRTC degamma at the same time. Reject atomic updates
when serspace sets both plane and CRTC degamma properties.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set DC plane with user degamma LUT or predefined TF from driver-specific
plane color properties. If plane and CRTC degamma are set in the same
time, plane degamma has priority. That means, we only set CRTC degamma
if we don't have plane degamma LUT or TF to configure. We return -EINVAL
if we don't have plane degamma settings, so we can continue and check
CRTC degamma.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The next patch adds pre-blending degamma to AMD color mgmt pipeline, but
pre-blending degamma caps (DPP) is currently in use to provide DRM CRTC
atomic degamma or implict degamma on legacy gamma. Detach degamma usage
regarging CRTC color properties to manage plane and CRTC color
correction combinations.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should reset a plane state if at least one of the color management
properties differs from old and new state.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise this is just initialized to 0. This needs to actually have a
value so that compute_curve can work for PQ EOTF.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Including drm_edid.h from amdgpu_mode.h causes the rebuild of literally
hundreds of files when drm_edid.h is modified, while there are only a
handful of files that actually need to include drm_edid.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add predefined transfer function programming. There is no post-blending
out gamma ROM for hardcoded curves, but we can use AMD color modules to
program LUT parameters from pre-defined coefficients and an empty
regamma LUT (or bump up LUT parameters with pre-defined TF values).
v2:
- update crtc color mgmt if regamma TF differs between states (Joshua)
- map inverse EOTF to DC transfer function (Melissa)
v3:
- update AMDGPU TF list
v4:
- update comment regarding regamma behavior
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will wire up MPC 3D LUT to DM CRTC color pipeline in the next patch,
but so far, only for atomic interface. By checking
set_output_transfer_func in DC drivers with MPC 3D LUT support, we can
verify that regamma is only programmed when 3D LUT programming fails. As
a groundwork to introduce 3D LUT programming and better understand each
step, detach atomic regamma programming from the crtc colocr updating
code.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Describe some expected behavior of the AMD DM color mgmt programming.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add AMD pre-defined transfer function property to default DRM CRTC gamma
to convert to wire encoding with or without a user gamma LUT. There is
no post-blending regamma ROM for pre-defined TF. When setting Gamma TF
(!= Identity) and LUT at the same time, the color module will combine
the pre-defined TF and the custom LUT values into the LUT that's
actually programmed.
v2:
- enable CRTC prop in the end of driver-specific prop sequence
- define inverse EOTFs as supported regamma TFs
- reword driver-specific function doc to remove shaper/3D LUT
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Blend 1D LUT or a pre-defined transfer function (TF) can be set to
linearize content before blending, so that it's positioned just before
blending planes in the AMD color mgmt pipeline, and after 3D LUT
(non-linear space). Shaper and Blend LUTs are 1D LUTs that sandwich 3D
LUT. Drivers should advertize blend properties according to HW caps.
There is no blend ROM for pre-defined TF. When setting blend TF (!=
Identity) and LUT at the same time, the color module will combine the
pre-defined TF and the custom LUT values into the LUT that's actually
programmed.
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
v5:
- get blend blob correctly
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On AMD HW, 3D LUT always assumes a preceding shaper 1D LUT used for
delinearizing and/or normalizing the color space before applying a 3D
LUT. Add pre-defined transfer function to enable delinearizing content
with or without shaper LUT, where AMD color module calculates the
resulted shaper curve. We apply an inverse EOTF to go from linear
values to encoded values. If we are already in a non-linear space and/or
don't need to normalize values, we can bypass shaper LUT with a linear
transfer function that is also the default TF value.
There is no shaper ROM. When setting shaper TF (!= Identity) and LUT at
the same time, the color module will combine the pre-defined TF and the
custom LUT values into the LUT that's actually programmed.
v2:
- squash commits for shaper LUT and shaper TF
- define inverse EOTF as supported shaper TFs
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
- replace BT709 EOTF by inv OETF
v5:
- get shaper blob correctly (Joshua)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.
When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.
Normally, MES will purge its process context list when the last queue
has been removed. The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.
If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.
On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation. Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.
The solution is for KFD to explicitly flush the process context address
from MES on process termination.
Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.
Move the declaration to right before sdma_v2_4_init_microcode().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of software managed counters.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add 3D LUT property for plane color transformations using a 3D lookup
table. 3D LUT allows for highly accurate and complex color
transformations and is suitable to adjust the balance between color
channels. It's also more complex to manage and require more
computational resources.
Since a 3D LUT has a limited number of entries in each dimension we want
to use them in an optimal fashion. This means using the 3D LUT in a
colorspace that is optimized for human vision, such as sRGB, PQ, or
another non-linear space. Therefore, userpace may need one 1D LUT
(shaper) before it to delinearize content and another 1D LUT after 3D
LUT (blend) to linearize content again for blending. The next patches
add these 1D LUTs to the plane color mgmt pipeline.
v3:
- improve commit message about 3D LUT
- describe the 3D LUT entries and size (Harry)
v4:
- advertise 3D LUT max size as the size of a single-dimension
v5:
- get lut3d blob correctly (Joshua)
- fix doc about 3d-lut dimension size (Sebastian)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This improves latency if the GPU is already busy with other work.
This is useful for VR compositors that submit highly latency-sensitive
compositing work on high-priority compute queues while the GPU is busy
rendering the next frame.
Userspace merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26462
v2: bump driver version (Alex)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
Fulfill the SMU13.0.7 support for Wifi RFI mitigation feature.
--
v10->v11:
- downgrade the prompt level on message failure(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
- Remove duplicate code (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature.
--
v10->v11:
- downgrade the prompt level on message failure(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
- Move function smu_v13_0_0_set_wbrf_exclusion_ranges to
smu_v13_0.c as a generic code for later use (IIpo Jarvinen)
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To protect PMFW from being overloaded.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).
--
v1->v2:
- update the prompt for feature support(Lijo)
v8->v9:
- update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
- correct the logics for wbrf range sorting(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add those data structures to support Wifi RFI mitigation feature.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use drm_gem_prime_fd_to_handle to import DMABufs for interop. This
ensures that a GEM handle is created on import and that obj->dma_buf
will be set and remain set as long as the object is imported into KFD.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create GEM handles for exporting DMABufs using GEM-Prime APIs. The GEM
handles are created in a drm_client_dev context to avoid exposing them
in user mode contexts through a DMABuf import.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Use the mirrored topology info to fill links for VF.
The new solution is required to simplify and optimize host driver logic.
Only use the new solution for VFs that support full duplex and
extended_peer_link_info otherwise the info would be incomplete.
2. avoid calling extended_link_info on VF as its not supported
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'wb_info' needs to be freed on error paths or it would leak the memory.
Smatch pointed this out.
Fixes: c81e13b929df ("drm/amd/display: Hande writeback request from userspace")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Multiplier to 'gain' the plane. When PQ is decoded using the fixed func
transfer function to the internal FP16 fb, 1.0 -> 80 nits (on AMD at
least) When sRGB is decoded, 1.0 -> 1.0. Therefore, 1.0 multiplier = 80
nits for SDR content. So if you want, 203 nits for SDR content, pass in
(203.0 / 80.0).
v4:
- comment about the PQ TF need for L-to-NL (from Harry's review)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brief documentation about pre-defined transfer function usage on AMD
display driver and standardized EOTFs and inverse EOTFs.
v3:
- Document BT709 OETF (Pekka)
- Fix description of sRGB and pure power funcs (Pekka)
v4:
- Add description of linear and non-linear forms (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of relying on color block names to get the transfer function
intention regarding encoding pixel's luminance, define supported
Electro-Optical Transfer Functions (EOTFs) and inverse EOTFs, that
includes pure gamma or standardized transfer functions.
v3:
- squash linear and unity TFs to identity (Pekka)
- define the right TFs for BT.709 (Pekka and Harry)
- add comment about AMD TF coefficients
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow userspace to tell the kernel driver the input space and,
therefore, uses correct predefined transfer function (TF) to go from
encoded values to linear values.
v2:
- rename TF enum prefix from DRM_ to AMDGPU_ (Harry)
- remove HLG TF
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When screen brightness is rapidly changed and PSR-SU is enabled the
display hangs on panels with this TCON even on the latest DCN 3.1.4
microcode (0x8002a81 at this time).
This was disabled previously as commit 072030b17830 ("drm/amd: Disable
PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert
"drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for
a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum
requirement for using PSR-SU on Phoenix")).
As hangs are still happening specifically with this TCON, disable PSR-SU
again for it until it can be root caused.
Cc: stable@vger.kernel.org
Cc: aaron.ma@canonical.com
Cc: binli@gnome.org
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Power up and power down has reverted programming order.
also make sure disable root clock last.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- When we're in a no plane config, DCN is always asserting
P-State allow
- This creates a scenario where the P-State blackout can start
just as VUPDATE takes place and transitions the DCN config to
a one where one or more HUBP's are active which can result in
underflow
- To fix this issue, force p-state disallow and unforce after
the transition from no planes case -> one or more planes active
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
For mode programming we want to extend the prefetch as much as possible
(up to oto, or as long as we can for equ) if we're not already applying
the 60us prefetch requirement. This is to avoid intermittent underflow
issues during prefetch.
The prefetch extension is applied under the following scenarios:
1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank)
2. We're using subvp or drr methods of p-state switch, in which case we
we don't care if prefetch takes up more of the blanking time
Mode programming typically chooses the smallest prefetch time possible
(i.e. highest bandwidth during prefetch) presumably to create margin between
p-states / c-states that happen in vblank and prefetch. Therefore we only
apply this prefetch extension when p-state in vblank is not required (UCLK
p-states take up the most vblank time).
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
User interface cannot guarantee system is in
idle state, so need to ensure we exit idle state
before accessing any HW data.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To match the hardware sequence
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Allen <allen.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dtbclk is unavaliable from pmfw. Try to grab the value from bounding box
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FP guard is valid for all recent asics, not just RV, so fix the comment.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
HostVMMinPageSize is expected to be in KB according to spec,
the checks later down the line reflect this as well.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
With DP2.1a expansion we are allowing DP40 cables to do UHBR13.5
how:
Assume UHBR10 means UHBR13.5 also for unknown cable type and
passive cable type.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ran Shi <ran.shi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
