IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code. Remove the example code for consumer
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220316130858.93455-2-krzysztof.kozlowski@canonical.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'clocks' in the example is not parsable with the 0 phandle value
because the number of #clock-cells is unknown in the previous entry.
Solve this by adding the clock provider node. Only 'cpg_clocks' is
needed as the examples are built with fixups which can be used to
identify phandles.
This is in preparation to support schema validation on .dtb files.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301190400.1644150-1-robh@kernel.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add driver for Renesas 9-series PCIe clock generators. This driver
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.
The driver is capable of configuring per-chip spread spectrum mode
and output amplitude, as well as per-output slew rate.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de
[sboyd@kernel.org: Use non-underscore API for fixed factor]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add an API for a fixed factor clk that uses an index for the parent
instead of a string name. This allows us to move drivers away from the
string based method of describing parents and use the DT/firmware based
method instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de
[sboyd@kernel.org: Expose a new API instead of internal function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add binding for Renesas 9-series PCIe clock generators. This binding
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-1-marex@denx.de
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Most of the i.MX clock generic API is built by selecting MXC_CLK.
Without it, the i.MX93 clock driver will fail to build:
aarch64-linux-gnu-ld: drivers/clk/imx/clk-imx93.o:
in function `imx93_clocks_probe': clk-imx93.c:(.text+0xa8):
undefined reference to `imx_obtain_fixed_clk_hw'
So fix this by selecting MXC_CLK for the CLK_IMX93.
Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220315082446.3120850-1-abel.vesa@nxp.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
use of_device_get_match_data() instead of open-coding on rk3568
and reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmIX/6wQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQhMB/43sXKOWdXJF5SRjBlbvqH+OHw0oDL+20ob
HLofUvvlMlEvPcndUYtaVMweEDCJllHiqhSQ8uPgYScR/8+xVLArY9OVTqTI88Qx
lW9cDzcRrTSO8N/buAvEygqkyXQA5tG2fASKNGKAZ95YIOMU3gO/PTBcflbE0Iy0
8b1CvKrWuJp6PRla2YY1pePnV0eJFh/iP7Z9wZVBwf0YmzJ8dSmUVTyK7Q7SqnGQ
/GxXisqRSMMgP1BH3HyDjXJyjSpfYNe3jPRtr+pIkWia+uLU8Zc7DRWFeObx6iTr
23Mg+ycrc5jzbeJYi5EwPuO3OLRXb7qR+v3nHRLNzXdjWEtw4NfK
=gHrL
-----END PGP SIGNATURE-----
Merge tag 'v5.18-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
- Improve the clocks for the rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
* tag 'v5.18-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
There are two identical assignments of pll->base to the same value,
the second assignment is redundant and can be removed.
Cleans up cppcheck warning:
drivers/clk/imx/clk-sscg-pll.c:528:12: style: Variable 'pll->base' is
reassigned a value before the old one has been used. [redundantAssignment]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220303090508.1125175-1-colin.i.king@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The i.MX clocks dt-bindings are going through the same tree as
the drivers, so add them to the same entry. Also add the git
tree and branch used.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220216132214.258865-1-abel.vesa@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- sama7g5: One low priority fix for GCLK of PDMC
- clk-master: cleanup of dead code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYidwXAAKCRAfOrpwrNPN
DG7OAQCGnH1gc+5FN0Q142rk6p5KSbT1JxhWGEGCCiQBXtkb+gEAsj/Mmn1CfyVx
yRQv9aWoxbJ2O5s7DnO3qhhJlh5zcgQ=
=FD7N
-----END PGP SIGNATURE-----
Merge tag 'clk-at91-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-at91
Pull AT91 clk driver changes From Nicolas Ferre:
- sama7g5: One low priority fix for GCLK of PDMC
- clk-master: cleanup of dead code
* tag 'clk-at91-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: at91: clk-master: remove dead code
clk: at91: sama7g5: fix parents of PDMCs' GCLK
Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") removed the master clock's prescaler from clock tree of SAMA7G5
as it has been discovered that there is a hardware bug when trying to
change it at run-time (bug is described in description of
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock")). This was previously changed at CPUFreq driver request. Thus, with
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") there is no need of code that handles run-time changes of master
clock's prescaler, thus remove this code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com
Audio PLL can be used as parent by the GCLKs of PDMCs.
Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220304182616.1920392-1-codrin.ciubotariu@microchip.com
The pll1443x PLL so far only supports rates from a rate table passed
during initialization. Calculating PLL settings dynamically helps audio
applications to get their desired rates, so support for this is added
in this patch.
The strategy to get to the PLL setting for a rate is:
- First try to only adjust kdiv which specifies the fractional part of the PLL.
This setting can be changed without glitches on the output and is therefore
preferred
- When that isn't possible then the rate table is searched for suitable rates,
so for standard rates the same settings are used as without this patch
- As a last resort the best settings are calculated dynamically
The code in this patch is based on patches from Adrian Alonso <adrian.alonso@nxp.com>
and Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-9-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Print all messages from within the pll14xx driver with a common
prefix using pr_fmt. No need to print function names anymore, so
drop them from the messages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-8-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
clk_pll14xx_round_rate() returns the lowest rate by indexing into
the rate table with the variable i. i is actually pll->rate_count
as this is the value we come out of the loop with. Use pll->rate_count
explicitly to make it a bit more clear what is being done. While at
it fix a typo in the comment. No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-7-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
In clk_pll1443x_set_rate() 'tmp' is used for the content of different
registers which makes it a bit hard to follow. Use different variables
named after the registers to make it clearer. No functional change
intended.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-6-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
The PLL driver has support for two different PLLs: The pll1416x and
the pll1443x. The latter has support for an additional kdiv value.
recalc_rate can be the same calculation when kdiv is assumed to be zero
for the PLL which doesn't support that value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-5-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Linux has these marvelous FIELD_GET/FIELD_PREP macros for easy access
to bitfields in registers. Use them and remove the now unused *_SHIFT
defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-4-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
The code tries to mask the bits in SDIV_MASK from 'tmp'. SDIV_MASK
already contains the shifted value, so shifting it again is wrong.
No functional change though as SDIV_SHIFT is zero.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-3-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
The driver has defines for the registers, but they are mostly unused.
Use the defines consistently throughout the driver. While at it rename
DIV_CTL to DIV_CTL0 because that's the name in the reference manual.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220304125256.2125023-2-s.hauer@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220225081733.2294166-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220225081733.2294166-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Remove the PLL 1/2 gates as it make AMP clock management harder without
obvious benifit.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220225081733.2294166-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Add i.MX93 clk driver. i.MX93 clk hardware design is different compared
with i.MX8M. It supports 4 sources for each clk root and the sources
are separated into a few groups, low speed/fast io/audio and etc.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-6-peng.fan@oss.nxp.com
[abel.vesa@nxp.com: Added missing module license and description]
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
This PLL module is a Fractional-N synthesizer,
supporting 30-bit numerator and denominator. Numerator is a signed
number. It has feature to adjust fractional portion of feedback
divider dynamically. This fracn gppll is used in i.MX93.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
i.MX93 CCM ROOT clock has a mux, gate and divider in one register, here
is to combine all these into one composite clk and simplify clk tree.
i.MX93 CCM is a new IP compared with i.MX8M, so introduce a new file.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Add i.MX93 clock definition
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Add the clock dt-binding file for i.MX93.
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220228020908.2810346-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
The > needs to be >= to prevent an off by one access.
Fixes: d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220228075014.GD13685@kili
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support")
Reported-by: David Wolfe <david.wolfe@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com
The elements of the table are never modified in clk-mux.c. To make this
clear to clock drivers, declare the parameter as const u32 *table.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220205103613.1216218-4-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
GCC warns:
> ../drivers/clk/nxp/clk-lpc18xx-cgu.c: In function ‘lpc18xx_pll1_recalc_rate’:
> ../drivers/clk/nxp/clk-lpc18xx-cgu.c:460:13: warning: variable ‘stat’ set but not used [-Wunused-but-set-variable]
> 460 | u32 stat, ctrl;
> | ^~~~
Get rid of the (apparently) useless read from the PLL1_STAT register and
the declaration of stat.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b04e0b8fd5443 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220205103613.1216218-2-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In commit 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation
algorithm to the CCF users"), the code handling the rational best
approximation algorithm was replaced by a call to the core
clk_fractional_divider_general_approximation function which did the same
thing back then.
However, in commit 82f53f9ee577 ("clk: fractional-divider: Introduce
POWER_OF_TWO_PS flag"), this common code was made conditional on
CLK_FRAC_DIVIDER_POWER_OF_TWO_PS flag which was not added back to the
rockchip clock driver.
This broke the ltk050h3146w-a2 MIPI DSI display present on a PX30-based
downstream board.
Let's add the flag to the fractional divider flags so that the original
and intended behavior is brought back to the rockchip clock drivers.
Fixes: 82f53f9ee577 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Cc: stable@vger.kernel.org
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20220131163224.708002-1-quentin.schulz@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
