IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- fix a use-case where no pins are mapped to GPIOs in
gpiochip_generic_config()
-----BEGIN PGP SIGNATURE-----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=+IoU
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a use-case where no pins are mapped to GPIOs in
gpiochip_generic_config()
* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Handle no pin_ranges in gpiochip_generic_config()
-----BEGIN PGP SIGNATURE-----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=0LBw
-----END PGP SIGNATURE-----
Merge tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Mostly just fixlets for md, but also a sed-opal parsing fix"
* tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux:
block: sed-opal: handle empty atoms when parsing response
md: Don't suspend the array for interrupted reshape
md: Don't register sync_thread for reshape directly
md: Make sure md_do_sync() will set MD_RECOVERY_DONE
md: Don't ignore read-only array in md_check_recovery()
md: Don't ignore suspended array in md_check_recovery()
md: Fix missing release of 'active_io' for flush
- Fix dirty tracking bitmap collection when using reporting bitmaps that
are not neatly aligned to u64's or match the IO page table radix tree
layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZddJHAAKCRCFwuHvBreF
YaRyAQCuywXMOQsPcTXZk+bepQ0EacRZKfyPrIcKMaHC1QLwKgEA9ApiVSbai0Q+
5IFX+rWrLUB4jiH5D12kmfhxgydFDAk=
=CCxs
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
Highlights:
- Regression fixes:
- Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI changes
- AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend
- x86-android-tablets: Fix touchscreen no longer working on Lenovo Yogabook
- x86-android-tablets: Fix serdev instantiation regression
- intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending
- Bug fixes
- think-lmi: Fix changing BIOS settings on Lenovo workstations
- touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing
- AMD-PMF: Fix Smart PC support not working after suspend/resume
- Other misc. small fixes
The following is an automated git shortlog grouped by driver:
Add new get_serdev_controller() helper:
- Add new get_serdev_controller() helper
intel:
- int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
intel-vbtn:
- Stop calling "VBDL" from notify_handler
platform/x86/amd/pmf:
- Fix a potential race with policy binary sideload
- Fixup error handling for amd_pmf_init_smart_pc()
- Add debugging message for missing policy data
- Fix a suspend hang on Framework 13
- Fix TEE enact command failure after suspend and resume
- Remove smart_pc_status enum
think-lmi:
- Fix password opcode ordering for workstations
thinkpad_acpi:
- Only update profile if successfully converted
touchscreen_dmi:
- Consolidate Goodix upside-down touchscreen data
- Allow partial (prefix) matches for ACPI names
x86-android-tablets:
- Fix acer_b1_750_goodix_gpios name
- Fix serdev instantiation no longer working
- Fix keyboard touchscreen on Lenovo Yogabook1 X90
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmXXRLAUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xYcwf+NBaayytcefvTUZ2tgCMj1ZTaQAxV
TB/W9j25i/kW6OLvqn8jIVJW7fNh0+onoVYDjWCxwGKp078OeL/xYd5W6uvPOmij
eP6cphlp7ysBZSd8g+Yz4KSl9EfiJsQ5njzozHcK15zNVy4WKcNCcxY+SDsK2szk
cNharuxOiOjU8U+a9sQsh4kj9AIEjLy42adxQ6LD1H7njNh3veZ3j2XejRFQCJL0
q6E0IxIFX6GpUQpD0Z2uuR/Tat/he7taPe+kv9G0y1x2fRvgqk5fGKie6QCTV9qe
tFqpVVs7Kp1MrsQw9fGtLPwkFjeQFD59VI8YveacNLc3hD0RgCHVV7Rx7g==
=ophs
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Regression fixes:
- Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
changes
- AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend
- x86-android-tablets: Fix touchscreen no longer working on Lenovo
Yogabook
- x86-android-tablets: Fix serdev instantiation regression
- intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending
Bug fixes:
- think-lmi: Fix changing BIOS settings on Lenovo workstations
- touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing
- AMD-PMF: Fix Smart PC support not working after suspend/resume
Other misc small fixes"
* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Only update profile if successfully converted
platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
platform/x86: Add new get_serdev_controller() helper
platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
platform/x86/amd/pmf: Fix a potential race with policy binary sideload
platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
platform/x86/amd/pmf: Add debugging message for missing policy data
platform/x86/amd/pmf: Fix a suspend hang on Framework 13
platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
platform/x86/amd/pmf: Remove smart_pc_status enum
platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
platform/x86: think-lmi: Fix password opcode ordering for workstations
long. They fix the bindings and clk driver for the Google GS101 SoC.
-----BEGIN PGP SIGNATURE-----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=X4vR
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here are some Samsung clk driver fixes I've been sitting on for far
too long.
They fix the bindings and clk driver for the Google GS101 SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZddOmwAKCRCRxhvAZXjc
oq1lAQDus0SGgwuwArdHtbbVj+gTs4s5XKvuGI6mqRiLvgvTzwD/TTNnOqJjWacS
on7XxDHgnjbMR2r90W/MuyPPjtAPkgA=
=i2E/
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in cachefiles
- Restrict aio cancellations to I/O submitted through the aio
interfaces as this is otherwise causing issues for I/O submitted
via io_uring
- Increase buffer for afs volume status to avoid overflow
- Fix a missing zero-length check in unbuffered writes in the
netfs library. If generic_write_checks() returns zero make
netfs_unbuffered_write_iter() return right away
- Prevent a leak in i_dio_count caused by netfs_begin_read() operating
past i_size. It will return early and leave i_dio_count incremented
- Account for ipv4 addresses as well as ipv6 addresses when processing
incoming callbacks in afs
* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
afs: Increase buffer size in afs_update_volume_status()
afs: Fix ignored callbacks over ipv4
cachefiles: fix memory leak in cachefiles_add_cache()
netfs: Fix missing zero-length check in unbuffered write
netfs: Fix i_dio_count leak on DIO read past i_size
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall
page through bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eUOc
-----END PGP SIGNATURE-----
Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
- While working on the ring buffer I noticed that the counter used
for knowing where the end of the data is on a sub-buffer was not
a full "int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size
bigger than 2^20. If that happens, unexpected results may
occur as there's no code checking if the counter overflowed the
20 bits of the write mask. There are other checks to make sure
events fit in the sub-buffer, but if the sub-buffer itself is
too big, that is not checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much
data is on it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZdaf+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjEIAQDpsvHqUFNoG5fkRlWr2U0hNl5M6zLI
xTf2mWoG/h8bwQD+NfiRC2UrD5EaubO15z0z6MxScOl1H9X+iI7WVwZkqQ8=
=txOr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=iPIR
-----END PGP SIGNATURE-----
Merge tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) If user requests to wake up a table and hook fails, restore the
dormant flag from the error path, from Florian Westphal.
2) Reset dst after transferring it to the flow object, otherwise dst
gets released twice from the error path.
3) Release dst in case the flowtable selects a direct xmit path, eg.
transmission to bridge port. Otherwise, dst is memleaked.
4) Register basechain and flowtable hooks at the end of the command.
Error path releases these datastructure without waiting for the
rcu grace period.
5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
on access to hook type, also from Florian Westphal.
netfilter pull request 24-02-22
* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
====================
Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZdaBCwAKCRDbK58LschI
g3EhAP0d+S18mNabiEGz8efnE2yz3XcFchJgjiRS8WjOv75GvQEA6/sWncFjbc8k
EqxPHmeJa19rWhQlFrmlyNQfLYGe4gY=
=VkOs
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit bb726b753f75 ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.
While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.
As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.
Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Iurman says:
====================
ioam6: fix write to cloned skb's
Make sure the IOAM data insertion is not applied on cloned skb's. As a
consequence, ioam selftests needed a refactoring.
====================
Link: https://lore.kernel.org/r/20240219135255.15429-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.
Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The receive queue is protected by its embedded spin-lock, not the
socket lock, so we need the former lock here (and only that one).
Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol")
Reported-by: Luosili <rootlab@huawei.com>
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IDR can't protect itself from the concurrent modification, place
idr_remove() under the protection of tp->lock.
Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.
Omit the fixes tag, even thought this is fix, better to target this for
next release.
Fixes: bfcd3a466172 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix EST offset for dwmac 5.10.
Currently configuring Qbv doesn't work as expected. The schedule is
configured, but never confirmed:
|[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST
The reason seems to be the refactoring of the EST code which set the wrong
EST offset for the dwmac 5.10. After fixing this it works as before:
|[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST
|[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched
Tested on imx93.
Fixes: c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure to free the already-parsed mcast_groups if
we don't get an ack from the kernel when reading family info.
This is part of the ynl_sock_create() error path, so we won't
get a call to ynl_sock_destroy() to free them later.
Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).
ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d71a ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We may hold an extra reference on a socket if a tag allocation fails: we
optimistically allocate the sk_key, and take a ref there, but do not
drop if we end up not using the allocated key.
Ensure we're dropping the sock on this failure by doing a proper unref
rather than directly kfree()ing.
Fixes: de8a6b15d965 ("net: mctp: add an explicit reference from a mctp_sk_key to sock")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reports unitialized variable when registering the hook,
reg->hook_ops_type == NF_HOOK_OP_BPF)
~~~~~~~~~~~ undefined
This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.
Fixes: 7b4b2fa37587 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.
Fixes: 91c7b38dc9f0 ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sabrina Dubroca says:
====================
tls: fixes for record type handling with PEEK
There are multiple bugs in tls_sw_recvmsg's handling of record types
when MSG_PEEK flag is used, which can lead to incorrectly merging two
records:
- consecutive non-DATA records shouldn't be merged, even if they're
the same type (partly handled by the test at the end of the main
loop)
- records of the same type (even DATA) shouldn't be merged if one
record of a different type comes in between
====================
Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.
The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.
We shouldn't do that, since there was a record in between that we
ignored.
Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.
Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.
process_rx_list also has similar issues.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of temperature configuration registers does
not always match the total number of temperature registers.
This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/linux-hwmon/d51181d1-d26b-42b2-b002-3f5a4037721f@roeck-us.net/
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Cc: Ahmad Khalifa <ahmad@khalifa.ws>
Tested-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
used instead of ignored, causing NULL pointer dereferences.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmXVztAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOgYgf/ftnjbTLvRZ56tgRNH13VXlhpgFIa
6H+DRQO2dEfEXFh9AbEeFJBZ7M6emXMCqtolh8a0Ulq09sPaI8jWwn6uST860l19
mzMJVRgbYZ7vbxq5bEuYovpMNg42mqMOu7sxWmu4pw0slPMfHftv5lNjaWVjC1RF
Ohb5d1ftglxuxS0EyewPdHpGpUpHsNfDZ6CilX4v+5mn9IKhJN++Afgy6YhaRriO
YICL1kYv+a43LRtNyq8aYWw7eEqD0OEbJVy4ZarBFTxdzqctNRuB1WXet1tE1rjU
qpBHhiGMPTuv4bXFksAdmMTV+Z/6tQ+/KLFyXPtQ/k+KubaxbVfRBAhIFg==
=Y5R6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two fixes for ARM ITS emulation. Unmapped interrupts were used instead
of ignored, causing NULL pointer dereferences"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
-----BEGIN PGP SIGNATURE-----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=pXyL
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- Fix a deadlock in fiemap.
There was a big lock around the whole operation that can interfere
with a page fault and mkwrite.
Reducing the lock scope can also speed up fiemap
- Fix range condition for extent defragmentation which could lead to
worse layout in some cases
* tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix deadlock with fiemap and extent locking
btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
syzbot reported the following NULL pointer dereference issue [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:0x0
[...]
Call Trace:
<TASK>
sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230
unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called
concurrently, psock->saved_data_ready can be NULL, causing the above issue.
This patch fixes this issue by calling the appropriate data ready function
using the sk_psock_data_ready() helper and protecting it from concurrency
with sk->sk_callback_lock.
Fixes: 6df7f764cd3c ("bpf, sockmap: Wake up polling after data copy")
Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1]
Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
kiocb_set_cancel_fn+0x9c/0xa8
ffs_epfile_read_iter+0x144/0x1d0
io_read+0x19c/0x498
io_issue_sqe+0x118/0x27c
io_submit_sqes+0x25c/0x5fc
__arm64_sys_io_uring_enter+0x104/0xab0
invoke_syscall+0x58/0x11c
el0_svc_common+0xb4/0xf4
do_el0_svc+0x2c/0xb0
el0_svc+0x2c/0xa4
el0t_64_sync_handler+0x68/0xb4
el0t_64_sync+0x1a4/0x1a8
Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The data on the subbuffer is measured by a write variable that also
contains status flags. The counter is just 20 bits in length. If the
subbuffer is bigger than then counter, it will fail.
Make sure that the subbuffer can not be set to greater than the counter
that keeps track of the data on the subbuffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240220095112.77e9cb81@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2808e31ec12e5 ("ring-buffer: Add interface for configuring trace sub buffer size")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the current design doesn't forward the data_type to the driver to
check unless there is a data_len/uptr for a driver specific struct we
should check and ensure that data_type is 0 if data_len is 0. Otherwise
any value is permitted.
Fixes: bd529dbb661d ("iommufd: Add a nested HW pagetable object")
Link: https://lore.kernel.org/r/0-v1-9b1ea6869554+110c60-iommufd_ck_data_type_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cited commit [1] added framer support under drivers/net/wan,
which is covered by NETWORKING [GENERAL]. And it is implied
that framer-provider.h and framer.h, which were also added
buy the same patch, are also maintained as part of NETWORKING [GENERAL].
Make this explicit by adding these files to the corresponding
section in MAINTAINERS.
[1] 82c944d05b1a ("net: wan: Add framer framework support")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported another task hung in __unix_gc(). [0]
The current while loop assumes that all of the left candidates
have oob_skb and calling kfree_skb(oob_skb) releases the remaining
candidates.
However, I missed a case that oob_skb has self-referencing fd and
another fd and the latter sk is placed before the former in the
candidate list. Then, the while loop never proceeds, resulting
the task hung.
__unix_gc() has the same loop just before purging the collected skb,
so we can call kfree_skb(oob_skb) there and let __skb_queue_purge()
release all inflight sockets.
[0]:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200
Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70
RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287
RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84
R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee
R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__unix_gc+0xe69/0xf40 net/unix/garbage.c:343
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
kthread+0x2ef/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>
Reported-and-tested-by: syzbot+ecab4d36f920c3574bf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9
Fixes: 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In newer hardware, IPA supports more than 32 endpoints. Some
registers--such as IPA interrupt registers--represent endpoints
as bits in a 4-byte register, and such registers are repeated as
needed to represent endpoints beyond the first 32.
In ipa_interrupt_suspend_clear_all(), we clear all pending IPA
suspend interrupts by reading all status register(s) and writing
corresponding registers to clear interrupt conditions.
Unfortunately the number of registers to read/write is calculated
incorrectly, and as a result we access *many* more registers than
intended. This bug occurs only when the IPA hardware signals a
SUSPEND interrupt, which happens when a packet is received for an
endpoint (or its underlying GSI channel) that is suspended. This
situation is difficult to reproduce, but possible.
Fix this by correctly computing the number of interrupt registers to
read and write. This is the only place in the code where registers
that map endpoints or channels this way perform this calculation.
Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
