IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 162503fd1c3a1d4e14dbe7f399c1d1bec1c8abbc upstream.
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: f545702b74f9 ("mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.6.I35ca9d6220ba48304438b992a76647ca8e5b126f@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d249ac37fc2396e8acc1adb0650cdacae5a990d upstream.
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but one
particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
Typically we will eventually deactivate CQE (cqhci_suspend() ->
cqhci_deactivate()), but that's not guaranteed -- in particular, if
we perform a partial (e.g., interrupted) system suspend.
The same bug was already found and fixed for two other drivers, in v5.7
and v5.9:
5cf583f1fb9c ("mmc: sdhci-msm: Deactivate CQE during SDHC reset")
df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel
GLK-based controllers")
The latter is especially prescient, saying "other drivers using CQHCI
might benefit from a similar change, if they also have CQHCI reset by
SDHCI_RESET_ALL."
So like these other patches, deactivate CQHCI when resetting the
controller. Do this via the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221026124150.v4.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebb5fd38f41132e6924cb33b647337f4a5d5360c upstream.
Several SDHCI drivers need to deactivate command queueing in their reset
hook (see sdhci_cqhci_reset() / sdhci-pci-core.c, for example), and
several more are coming.
Those reset implementations have some small subtleties (e.g., ordering
of initialization of SDHCI vs. CQHCI might leave us resetting with a
NULL ->cqe_private), and are often identical across different host
drivers.
We also don't want to force a dependency between SDHCI and CQHCI, or
vice versa; non-SDHCI drivers use CQHCI, and SDHCI drivers might support
command queueing through some other means.
So, implement a small helper, to avoid repeating the same mistakes in
different drivers. Simply stick it in a header, because it's so small it
doesn't deserve its own module right now, and inlining to each driver is
pretty reasonable.
This is marked for -stable, as it is an important prerequisite patch for
several SDHCI controller bugfixes that follow.
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221026124150.v4.1.Ie85faa09432bfe1b0890d8c24ff95e17f3097317@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64ac0befe75bdfaffc396c2b4a0ed5ae6920eeee upstream.
Cast upper bound of branch range to long to do signed compare,
avoid negative offset trigger this warning.
Fixes: 9b6584e35f40 ("MIPS: jump_label: Use compact branches for >= r6")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b9eaee9828fe98b030cf43ac50065a54a2f5d52 upstream.
Currently, when mapping the EFI runtime regions in the EFI page tables,
we complain about misaligned regions in a rather noisy way, using
WARN().
Not only does this produce a lot of irrelevant clutter in the log, it is
factually incorrect, as misaligned runtime regions are actually allowed
by the EFI spec as long as they don't require conflicting memory types
within the same 64k page.
So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking
for misalignment
- only revert to RWX mappings for non-code regions if misaligned code
regions are also known to exist.
Cc: <stable@vger.kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50e63dd8ed92045eb70a72d7ec725488320fb68b ]
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address 00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
ra : vsnprintf+0x1e4/0x336
epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0
gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000
t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20
s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000
a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff
a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff
s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008
s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00
s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002
s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617
t5 : ffffffff812f3618 t6 : ffffffff81203d08
status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d
[<ffffffff80338936>] vsnprintf+0x1e4/0x336
[<ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<ffffffff80055d86>] vprintk_emit+0x56/0x192
[<ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<ffffffff800563d2>] vprintk+0x72/0x80
[<ffffffff806813b2>] _printk+0x36/0x50
[<ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<ffffffff808057ec>] paging_init+0x528/0x5bc
[<ffffffff808031ae>] setup_arch+0xd0/0x592
[<ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params.
Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50f4dd657a0fcf90aa8da8dc2794a8100ff4c37c ]
Even after commit 89fd4a1df829 ("riscv: jump_label: mark arguments as
const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:
arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
" .option push \n\t"
^
1 error generated.
I think the problem is when "-Os" is passed as CFLAGS, it's removed by
"CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is
introduced in commit e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday
broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c
arm64 does remove "-Os" as well, but it forces "-O2" after removing
"-Os".
I compared the generated vgettimeofday.o with "-O2" and "-Os",
I think no big performance difference. So let's tell the kbuild not
to remove "-Os" rather than follow arm64 style.
vdso related performance can be improved a lot when building kernel with
CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)
Fixes: e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221031182943.2453-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6510c78490c490a6636e48b61eeaa6fb65981f4b ]
thread_struct's s[12] may contain random kernel memory content, which
may be finally leaked to userspace. This is a security hole. Fix it
by clearing the s[12] array in thread_struct when fork.
As for kthread case, it's better to clear the s[12] array as well.
Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221029113450.4027-1-jszhang@kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/CAJF2gTSdVyAaM12T%2B7kXAdRPGS4VyuO08X1c7paE-n4Fr8OtRA@mail.gmail.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23569b5652ee8e8e55a12f7835f59af6f3cefc30 ]
kmemleak reports memory leaks in macvlan_common_newlink, as follows:
ip link add link eth0 name .. type macvlan mode source macaddr add
<MAC-ADDR>
kmemleak reports:
unreferenced object 0xffff8880109bb140 (size 64):
comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z.....
80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk
backtrace:
[<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
[<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
[<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
[<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
[<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
[<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
[<ffffffff81d98278>] rtnl_newlink+0x48/0x70
...
In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.
Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.
Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f111606b63ff2282428ffbac0447c871eb957b6c ]
When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.
Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109025432.80900-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0348c1ab980c1d43fb37b758d4b760990c066cb5 ]
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 879785def0f5e71d54399de0f8a5cb399db14171 ]
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6dd81b ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b16b3fdf675cca15a537572bac50cc5354368fc ]
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.
Fixes: 28c5107aa904 ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f94d0498f9c763f37172c08059ae91804c3075a ]
The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe5b3ce8b4377e543960220f539b989a927afd8a ]
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2d45fdf9a0ed2c94c01c422a0d0add8ffd42099 ]
pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6092ea1e6d7bd12acd881f6aa2b5054cd70e096 ]
When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied
during adapter goes up are not cleared. Fix it. Only be compiled, not be
tested.
Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109012100.99132-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4072058af4fd8fb4658e7452289042a406a9398 ]
If mctp_neigh_init() return error, the routes resources should
be released in the error handling path. Otherwise some resources
leak.
Fixes: 4d8b9319282a ("mctp: Add neighbour implementation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20221108095517.620115-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcea1a8107c04b9521dee1dd37971757a22db162 ]
Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.
The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform")
Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com>
Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23d743301198f7903d732d5abb4f2b44f22f5df0 ]
Intel AlderLake-S platform is capable of running on 2.5GBps link speed.
This patch enables 2.5Gbps link speed on AlderLake-S platform.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/20220225023325.474242-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: dcea1a8107c0 ("stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d75aed1428da787cbe42bc073d76f1354f364d92 ]
When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.
Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109021451.121490-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d47b53fb3f363a74538a1dbd09954af3d8d4131 ]
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.
Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109011537.96975-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f4096b410e8d31c3f07f39de3b17d144edd53d ]
The pkt_reformat pointer being saved under flow_act and not
dest attribute in the termination table instance.
Fix the comparison pointers.
Also fix returning success if one pkt_reformat pointer is null
and the other is not.
Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2808b37b59288ad8f1897e3546c2296df3384b65 ]
For a single CPU system, the kernel thread executing mlx5_cmd_flush()
never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop.
On a single processor system, this leads to a deadlock as the kernel
thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this,
by adding the cond_resched() call to the loop, allow the command
completion kernel thread to execute.
Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15f8f168952f54d3c86d734dc764f20844e423ac ]
Mlx5 LAG is initialized asynchronously on a workqueue which means that for
a brief moment after setting mlx5 UL representors as lower devices of a
bond netdevice the LAG itself is not fully initialized in the driver. When
adding such bond device to a bridge mlx5 bridge code will not consider it
as offload-capable, skip creating necessary bookkeeping and fail any
further bridge offload-related commands with it (setting VLANs, offloading
FDBs, etc.). In order to make the error explicit during bridge
initialization stage implement the code that detects such condition during
NETDEV_PRECHANGEUPPER event and returns an error.
Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d38a648d2d6cc7bee11c6f533ff9426a00c2a74c ]
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae61 ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b06334919c7a068d54ba5b219c05e919d89943f7 ]
When failed to enable interrupts in nixge_open() for opening device,
napi isn't disabled. When open nixge device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 519b58bbfa825f042fcf80261cc18e1e35f85ffd ]
When prestera_sdma_switch_init() failed, the memory pointed to by
sw->rxtx isn't released. Fix it. Only be compiled, not be tested.
Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03c1f1ef1584c981935fab2fa0c45d3e43e2c235 ]
syzbot reported a warning like below [1]:
WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840
Modules linked in:
CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:nf_tables_exit_net+0x71c/0x840
...
Call Trace:
<TASK>
? __nft_release_table+0xfc0/0xfc0
ops_exit_list+0xb5/0x180
cleanup_net+0x506/0xb10
? unregister_pernet_device+0x80/0x80
process_one_work+0xa38/0x1730
? pwq_dec_nr_in_flight+0x2b0/0x2b0
? rwlock_bug.part.0+0x90/0x90
? _raw_spin_lock_irq+0x46/0x50
worker_thread+0x67e/0x10e0
? process_one_work+0x1730/0x1730
kthread+0x2e5/0x3a0
? kthread_complete_and_exit+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
In nf_tables_exit_net(), there is a case where nft_net->commit_list is
empty but nft_net->module_list is not empty. Such a case occurs with
the following scenario:
1. nfnetlink_rcv_batch() is called
2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is
set to status
3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD
(nft_net->commit_list is released, but nft_net->module_list is not
because of NFNL_ABORT_AUTOLOAD flag)
4. Jump to replay label
5. netlink_skb_clone() fails and returns from the function (this is
caused by fault injection in the reproducer of syzbot)
This patch fixes this issue by calling __nf_tables_abort() when
nft_net->module_list is not empty in nf_tables_exit_net().
Fixes: eb014de4fd41 ("netfilter: nf_tables: autoload modules from the abort path")
Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1]
Reported-by: syzbot+178efee9e2d7f87f5103@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03832a32bf8ff0a8305d94ddd3979835a807248f ]
When type is NFNL_CB_MUTEX and -EAGAIN error occur in nfnetlink_rcv_msg(),
it does not execute nfnl_unlock(). That would trigger potential dead lock.
Fixes: 50f2db9e368f ("netfilter: nfnetlink: consolidate callback types")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d957ae513fc420d0a5a9bac815eb49ffebb56f ]
Commit 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221103092704.173391-1-dolinux.peng@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad353b710c7493df3d4fc2d3a51819126bed2e81 ]
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412d3a09d ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce9e57feeed81d17d5e80ed86f516ff0d39c3867 ]
When failed to register irq in xgene_enet_open() for opening device,
napi isn't disabled. When open xgene device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: aeb20b6b3f4e ("drivers: net: xgene: fix: ifconfig up/down crash")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107043032.357673-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3faf7e14ec0c3462c2d747fa6793b8645d1391df ]
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac2b9f34f02052709aea7b34bb2a165e1853eb41 ]
If device_register() fails, it should call put_device() to give
up reference, the name allocated in dev_set_name() can be freed
in callback function kobject_cleanup().
Fixes: 5b65781d06ea ("dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20221020062827.2914148-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 081195d17a0c4c636da2b869bd5809d42e8cbb13 ]
A clk_prepare_enable() call in the probe is not balanced by a corresponding
clk_disable_unprepare() in the remove function.
Add the missing call.
Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e9e3837a680c9bd2438e4db2b83270c6c052d005.1666640987.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d726cb8497c6b12106fd617d46eef11763ea86 ]
The first IRQ is required, but IRQs 1 through (nb_phy_chans - 1) are
optional, because on some platforms (e.g. PXA168) there is a single IRQ
shared between all channels.
This change inhibits a flood of "IRQ index # not found" messages at
startup. Tested on a PXA168-based device.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220906000709.52705-1-doug@schmorgal.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c075b192fe41030457cd4a5f7dea730412bca40 ]
This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value
in tipc_nl_compat_name_table_dump") where it should have type casted
sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative
value.
syzbot reported a call trace because of it:
BUG: KMSAN: uninit-value in ...
tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934
__tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238
tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321
tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324
genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792
netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501
genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
Reported-by: syzbot+e5dbaaa238680ce206ea@syzkaller.appspotmail.com
Fixes: 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/ccd6a7ea801b15aec092c3b532a883b4c5708695.1667594933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed4314f7729714d788698ade4f9905ee5378ebc0 ]
There are two problems with meson8b_devm_clk_prepare_enable(),
introduced in commit a54dc4a49045 ("net: stmmac: dwmac-meson8b:
Make the clock enabling code re-usable"):
- It doesn't pass the clk argument, but instead always the
rgmii_tx_clk of the device.
- It silently ignores the return value of devm_add_action_or_reset().
The former didn't become an actual bug until another user showed up in
the next commit 9308c47640d5 ("net: stmmac: dwmac-meson8b: add support
for the RX delay configuration"). The latter means the callers could
end up with the clock not actually prepared/enabled.
Fixes: a54dc4a49045 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8aa59e355949442c408408c2d836e561794c40a1 ]
It causes NULL pointer dereference when testing as following:
(a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket.
(b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan
link device, and bind vxcan device to bond device (can also use
ifenslave command to bind vxcan device to bond device).
(c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket.
(d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket.
The bond device invokes the can-raw protocol registration interface to
receive CAN packets. However, ml_priv is not allocated to the dev,
dev_rcv_lists is assigned to NULL in can_rx_register(). In this case,
it will occur the NULL pointer dereference issue.
The following is the stack information:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:can_rx_register+0x12d/0x1e0
Call Trace:
<TASK>
raw_enable_filters+0x8d/0x120
raw_enable_allfilters+0x3b/0x130
raw_bind+0x118/0x4f0
__sys_bind+0x163/0x1a0
__x64_sys_bind+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/20221028085650.170470-1-shaozhengchao@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c175da7b0378445f5ef53904247cfbfb87e0b78 ]
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:
============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140
The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
sack_outs increase repeatly
In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.
socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \
--ignore-taint
socket-tcp* represent all socket-tcp tests in test/zdtm/static/.
Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf53db768a8790fdaae2fa3a81322b080285f7e5 ]
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668205b9c9f94d5ed6ab00cce9a46a654c2b5d16 ]
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: aa730a9905b7 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f25caaca424703d5a0607310f0452f978f1f78d9 ]
IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: 2a54f2c77934 ("net: iosm: net driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85cbaf032d3cd9f595152625eda5d4ecb1d6d78d ]
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 531705a765493655472c993627106e19f7e5a6d2 ]
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6973091d1b50ab4042f6a2d495f59e9db3662ab8 ]
When running under PV, the guest's TOD clock is under control of the
ultravisor and the hypervisor isn't allowed to change it. Hence, don't
allow userspace to change the guest's TOD clock by returning
-EOPNOTSUPP.
When userspace changes the guest's TOD clock, KVM updates its
kvm.arch.epoch field and, in addition, the epoch field in all state
descriptions of all VCPUs.
But, under PV, the ultravisor will ignore the epoch field in the state
description and simply overwrite it on next SIE exit with the actual
guest epoch. This leads to KVM having an incorrect view of the guest's
TOD clock: it has updated its internal kvm.arch.epoch field, but the
ultravisor ignores the field in the state description.
Whenever a guest is now waiting for a clock comparator, KVM will
incorrectly calculate the time when the guest should wake up, possibly
causing the guest to sleep for much longer than expected.
With this change, kvm_s390_set_tod() will now take the kvm->lock to be
able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock()
also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.
The function kvm_s390_set_tod_clock is now unused, hence remove it.
Update the documentation to indicate the TOD clock attr calls can now
return -EOPNOTSUPP.
Fixes: 0f3035047140 ("KVM: s390: protvirt: Do only reset registers that are accessible")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011160712.928239-2-nrb@linux.ibm.com
Message-Id: <20221011160712.928239-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
