IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add set_bais_level function for rt5682s codec to enable bclk and lrclk
before codec widgets power on and disable bclk and lrclk after widgets
power down, to avoid pop noise
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20220921090750.3833256-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The IPC4 use of doorbell registers leaves some corner cases not well defined
and the 'correct sequences' are subjective in a sense.
The DSP doorbell registers are used as separate and independent channels and
the sequences for host -> DSP -> host (reply) can be racy.
For example:
The ACKing of a received message can happen before the firmware sends the reply
or it can as well happen after the reply has been sent and received by the host.
Both can be considered 'correct sequences' but they need different handling.
This series will allow the kernel to service any interpretation of the
sequencing on the firmware side.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are random cleanup for soc-dpam.c/h.
Basically, these are just cleanup, nothing changed.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
All Intel drivers for cAVS platforms contain a sequence for S3 resume
which doesn't seem justified nor necessary. Forensic Git investigation
in internal repositories did not provide any rationale for the
implementation, and tests show no impact when those sequences are
removed.
This sequence was identified as problematic during a large HDaudio
cleanup where all programming sequences were revisited before
extensions are added.
Don't populate the read-only array ramp_base on the stack but
instead make it static const. Also makes the object code a
little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221018152928.942186-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221018133843.16958-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By acking a received message we tell the DSP that we have processed the
message (reply or notification) and we are open to receive a new one.
The original implementation did this in a common code after the received
message got handled as reply or notification.
With right timing this opens up a small window when we have processed the
reply and let the other thread proceed to send a new message to the DSP,
which is allowed as the DSP is free to receive message.
But when the message is received and processed by the DSP and it wants to
send a reply it will still see that the previous message has not been
acked, so it fails to send a reply. Later the first reply got acked by the
kernel, but it is too late and the in-flight message got a timeout due to
firmware not responding (which it tried, but could not).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before attempting to send a message to the DSP we need to check if the
downstream BUSY flag has been cleared by the firmware to avoid lost IPC
messages by the firmware.
This is required by a firmware which only acks the received message after
it has sent a reply to the host.
With a bad luck, the host would send a message before the firmware gets to
the clearing the flag and thus losing a message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read both registers as the first step in the interrupt handler to make
sure that we are handling the event which triggered the interrupt.
The delayed reading of the target request register might reflect incorrect
information about the reason why the interrupt was risen.
Note also that the IPC3 interrupt handler is implemented in this way also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanup dapm_widget_set_power() comment, parenthesis,
and 100 chars. It has no meaning, nothing will be changed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8oiowdk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently snd_soc_dapm_free_widget() is assuming input parameter is
non NULL. Thus, caller need to care about it.
This patch care it at snd_soc_dapm_free_widget().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn8yowdr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_add_path() is using local variable "widgets[]", but it is
same as path->node[].
This is no meaning and duplicate operation. This patch removes "widgets[]".
path->node[SND_SOC_DAPM_DIR_IN] = wsource;
path->node[SND_SOC_DAPM_DIR_OUT] = wsink;
widgets[SND_SOC_DAPM_DIR_IN] = wsource;
widgets[SND_SOC_DAPM_DIR_OUT] = wsink;
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1teowdx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current error handling on snd_soc_dapm_add_route() has some wastes.
It indicates *own* error message *only* for sink or source,
and return error directly at (A). OTOH, it has similar error message at
(B) which indicates *both* sink/source.
And more, (A) is using dev_err(), (B) is using dev_warn().
(B) is caring prefix, but (A) is not.
(X) int snd_soc_dapm_add_route(...)
{
...
if (wsource == NULL) {
(A) dev_err(...);
return -ENODEV;
}
if (wsink == NULL) {
(A) dev_err(...);
return -ENODEV;
}
...
ret = snd_soc_dapm_add_path(...);
if (ret)
(B) goto err;
return 0;
err:
(B) dev_warn(...);
return ret;
}
Above snd_soc_dapm_add_route() (= X) is called from
snd_soc_dapm_add_routes() (= Y).
(X) will indicate error message by itself, but (Y) will indicate
own error message at (C). (C) is duplicated.
(Y) int snd_soc_dapm_add_routes(...)
{
...
for (...) {
(X) int r = snd_soc_dapm_add_route(...);
if (r < 0) {
(C) dev_err(...);
ret = r;
}
...
}
...
}
This patch (1) merges these error message (= A,B) into one,
(2) use dev_err(), (3) remove duplicate error message (= C) from
snd_soc_dapm_add_routes().
By this patch, it will indicate error message like this.
- error message with prefix
- not found widget will have "(*)" mark
- it indicates [control] if exists.
ex)
[if no sink with control]
ASoC: Failed to add route SOURCE -> [CTRL] -> SINK(*)
[if no source without control]
ASoC: Failed to add route SOURCE(*) -> SINK
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgduowe5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qr6qayt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The flow contains surprising parts that seem to have been inspired by
the Skylake driver.
During a resume from S3, the state of the links prior to suspend
should not matter. One would have to assume that the links are powered
down anyways prior to suspend, and there is also no specific code that
turns links on unconditionally on resume.
Likewise, the snd_hdac_init_chip() routine will start the cmd_io
handling, and it's not clear why we should care about the state of the
DMA prior to suspend.
This patch removes these two sequences to simplify the flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same code was directly copied from the skylake driver where it was
already questionable. Remove and simplify the flow.
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cce6c149eba3a ("ASoC: Intel: Skylake: add link management")
added a perfectly logical/symmetrical link handling for
'suspend_active' aka S0ix
However that commit also added a less obvious part, where during S3
resume the code will "turn off the links which are off before suspend"
as well as stop the cmd_io which is not started.
This sequence looks completely unnecessary and possibly wrong, remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Doug Brown <doug@schmorgal.com>:
This series adds devicetree support for the Wolfson WM8961 codec. The
first patch adds a schema, the second patch hooks it up in the code, and
the third patch allows it to be selected in Kconfig.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes are leading the way - one addresses the incorrect DMA mask
assignment (typo) at driver probe. The other, fixes a potential buffer
overflow when copying data received from firmware to kernel buffer.
However unlikely, the fix should still be there.
Then a range of patches providing the support for:
- AML with rt286 (machine board)
- KBL-R for rt298 (codec)
- KBL-R with rt298 (machine board)
- APL/KBL with da7219 (machine board)
- Addition of all the missing SKL-based PCI ids to core.c
Of the remaining changes, only one stands out - special case is provided
for "unsupported" IPCs. The driver supports a range of platforms,
however, on some generations given IPC may not be supported. Such call
shall not be treated as "invalid" - those are two different scenarios.
Everything else in the patchset is mostly a readability improvement:
spelling fixes and log messages issues, code simplification.
Merge series from Chancel Liu <chancel.liu@nxp.com>:
At a previous time, we have successfully created a virtual sound card
based on rpmsg. The sound card works under this mechanism Cortex-A core
tells the Cortex-M core the format, rate, channel, .etc configuration
of the PCM parameters and Cortex-M controls real hardware devices such
as SAI and DMA. From the view of Linux side, the sound card is bound to
a rpmsg channel through which it can access SAI.
Here these patches are introduced to create a new virtual sound card to
access MICFIL based on a new created rpmsg channel. It's easy to create
a new rpmsg channel for MICFIL through rpmsg name service announcment.
Also the other ASoC components bound to this rpmsg MICFIL sound card
will be registered with these patches.
If other sound cards using different hardware devices needs to be
created over rpmsg in the future, these patches can be referred.
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
The patchset improves:
- Exposes output stage (post mixer) gain control and makes it new
Master playback gain, DAC gain was the previous master.
However, no Master mute now.
- Exposes all mixer inputs (both Mics, LineIn and DAC) with their
gain controls.
- Exposes microphones widgets: single/differential input, boost.
Known issues:
- Bypass path enablement isn't applied immediately, for make
things going bit clock needs to be triggered for a bit,
e.g. by aplay dummy.wav
It might be a hardware bug, since the bit clock isn't
declared as required for codec operation.
Tested on:
- Ritmix RZX-27 (jz4725b).
- Ritmix RZX-50 (jz4755).
Merge series from Shang XiaoJing <shangxiaojing@huawei.com>:
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes
it more clear what is going on for the casual reviewer.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
This series adds machine board for max98927 codec present on some
Chromebook devices.
Microphone input can be single ended or differential, although
known SoCs with that codec expose MIC1P only.
Also there is 20dB mic boost in the Mic1 path.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-8-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
At the moment only DAC is implemented fully and Line In path can be
switched on/off. The patch implements Mic 1 and Mic 2 paths and fully
implements Line In path.
Manual states that these controls (16.6.3.3 Programmable attenuation:
GOi) gain varies from -22.5dB to +6.0dB with 1.5dB step. Also there's
extra values below the minimum, but they behave the same as the minimum
value.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-7-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment DAC control is used as Master Playback control, this is
incorrect as DAC's output goes to a Mixer.
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
Output of the Mixer goes to Output Stage control which is the best suite
for the new Playback Master. However, it doesn't have mute capability.
The patch implements Output Stage control as a new master and renames
old Master to DAC. Rest of mixer inputs will be implemented in the next
patch in the series.
Manual states that Output stage control (16.6.3.5 Programmable output
amplifier: PGAT) gain varies from -33.5dB to +4.5dB, gain step isn't
fixed and has 3 opts.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-6-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment Capture source selector appears on Playback
tab in the alsamixer and has a senseless name.
Let's fix that.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-5-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-3-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ENABLE_LOGS and SYSTEM_TIME IPCs call LARGE_CONFIG_SET internally which
dumps an error message in case of an error. There is no need to repeat
the process in the top level handler.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Utilize NOT_SUPPORTED status code to differentiate between unsupported
and invalid requests. Skip over error paths if it is the former that is
communicated by the base firmware.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While LOG_BUFFER_STATUS is a simple notification with only one
meaningful field, same message ptr shall not be reused for two different
handlers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some configurations board fails to compile due to missing header. Add
it to fix build.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBL and APL devices use same codec but have different clock, so it must
be set appropriately depending on device.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBL-R RVPs contain built-in rt298 codec which requires different PLL
clock and .dai_fmt configuration than seen on other boards.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If an event caused firmware to return invalid RX size for
LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes.
Fix by utilizing min_t().
Reported-by: CoolStar <coolstarorganization@gmail.com>
Fixes: f14a1c5a9f83 ("ASoC: Intel: avs: Add module management requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Spelling error leads to incorrect behavior when setting up DMA mask.
Fixes: a5bbbde2b81e ("ASoC: Intel: avs: Use helper function to set up DMA")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update Pink Sardine platform ACP register header with Soundwire
Controller specific registers and other ACP registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221010093941.2354783-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio unit of Marvell Armada38x SoC is similar to the ones comprised by
other Marvell SoCs (Kirkwood, Dove and Armada 370). Therefore KW audio
driver can be used to support it and this commit adds new compatible string
to identify Armada 38x variant.
Two new memory regions are added: first one for PLL configuration and
the second one for choosing one of audio I/O modes (I2S or S/PDIF).
For the latter purpose a new optional DT property is added ('spdif-mode').
kirkwood-i2s driver is extended by adding a new init function for Armada
38x flavor and also a routine that enables PLL output (i.e. MCLK)
configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Star_Automation <star@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Lior Amsalem <alior@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Hezi Shahmoon <hezi@marvell.com>
Reviewed-by: Neta Zur Hershkovits <neta@marvell.com>
[pali: Fix support for pre-38x SoCs]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220926110533.13475-1-pali@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
