IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dm_bufio_get_device_size returns the device size in blocks. Before
returning the value, we must subtract the nubmer of starting
sectors. The number of starting sectors may not be divisible by block
size.
Note that currently, no target is using dm_bufio_set_sector_offset and
dm_bufio_get_device_size simultaneously, so this change has no effect.
However, an upcoming dm-verity-fec fix needs this change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The system would deadlock when swapping to a dm-crypt device. The reason
is that for each incoming write bio, dm-crypt allocates memory that holds
encrypted data. These excessive allocations exhaust all the memory and the
result is either deadlock or OOM trigger.
This patch limits the number of in-flight swap bios, so that the memory
consumed by dm-crypt is limited. The limit is enforced if the target set
the "limit_swap_bios" variable and if the bio has REQ_SWAP set.
Non-swap bios are not affected becuase taking the semaphore would cause
performance degradation.
This is similar to request-based drivers - they will also block when the
number of requests is over the limit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type
definition of various targets.
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-linear and dm-flakey obviously can pass through inline crypto support.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now that device mapper supports inline encryption, add the ability to
evict keys from all underlying devices. When an upper layer requests
a key eviction, we simply iterate through all underlying devices
and evict that key from each device.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Introduce blk_ksm_update_capabilities() to update the capabilities of
a keyslot manager (ksm) in-place. The pointer to a ksm in a device's
request queue may not be easily replaced, because upper layers like
the filesystem might access it (e.g. for programming keys/checking
capabilities) at the same time the device wants to replace that
request queue's ksm (and free the old ksm's memory). This function
allows the device to update the capabilities of the ksm in its request
queue directly. Devices can safely update the ksm this way without any
synchronization with upper layers *only* if the updated (new) ksm
continues to support all the crypto capabilities that the old ksm did
(see description below for blk_ksm_is_superset() for why this is so).
Also introduce blk_ksm_is_superset() which checks whether one ksm's
capabilities are a (not necessarily strict) superset of another ksm's.
The blk-crypto framework requires that crypto capabilities that were
advertised when a bio was created continue to be supported by the
device until that bio is ended - in practice this probably means that
a device's advertised crypto capabilities can *never* "shrink" (since
there's no synchronization between bio creation and when a device may
want to change its advertised capabilities) - so a previously
advertised crypto capability must always continue to be supported.
This function can be used to check that a new ksm is a valid
replacement for an old ksm.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The device mapper may map over devices that have inline encryption
capabilities, and to make use of those capabilities, the DM device must
itself advertise those inline encryption capabilities. One way to do this
would be to have the DM device set up a keyslot manager with a
"sufficiently large" number of keyslots, but that would use a lot of
memory. Also, the DM device itself has no "keyslots", and it doesn't make
much sense to talk about "programming a key into a DM device's keyslot
manager", so all that extra memory used to represent those keyslots is just
wasted. All a DM device really needs to be able to do is advertise the
crypto capabilities of the underlying devices in a coherent manner and
expose a way to evict keys from the underlying devices.
There are also devices with inline encryption hardware that do not
have a limited number of keyslots. One can send a raw encryption key along
with a bio to these devices (as opposed to typical inline encryption
hardware that require users to first program a raw encryption key into a
keyslot, and send the index of that keyslot along with the bio). These
devices also only need the same things from the keyslot manager that DM
devices need - a way to advertise crypto capabilities and potentially a way
to expose a function to evict keys from hardware.
So we introduce a "passthrough" keyslot manager that provides a way to
represent a keyslot manager that doesn't have just a limited number of
keyslots, and for which do not require keys to be programmed into keyslots.
DM devices can set up a passthrough keyslot manager in their request
queues, and advertise appropriate crypto capabilities based on those of the
underlying devices. Blk-crypto does not attempt to program keys into any
keyslots in the passthrough keyslot manager. Instead, if/when the bio is
resubmitted to the underlying device, blk-crypto will try to program the
key into the underlying device's keyslot manager.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
This could lead to errors, like:
device-mapper: era: metadata_digest_transcribe_writeset: dm_array_set_value failed
device-mapper: era: process_old_eras: digest step failed, stopping digestion
The reason of the above error is that the worker started the digestion
of the archived writeset using the old, larger size.
As a result, metadata_digest_transcribe_writeset tried to write beyond
the end of the era array.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix the writeset tree equality test function to use the right value size
when comparing two btree values.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Deallocate the memory allocated for the in-core bitsets when destroying
the target and in error paths.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-era doesn't support changing the data block size of existing devices,
so check explicitly that the requested block size for a new target
matches the one stored in the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In case of devices with at most 64 blocks, the digestion of consecutive
eras uses the writeset of the first era as the writeset of all eras to
digest, leading to lost writes. That is, we lose the information about
what blocks were written during the affected eras.
The digestion code uses a dm_disk_bitset object to access the archived
writesets. This structure includes a one word (64-bit) cache to reduce
the number of array lookups.
This structure is initialized only once, in metadata_digest_start(),
when we kick off digestion.
But, when we insert a new writeset into the writeset tree, before the
digestion of the previous writeset is done, or equivalently when there
are multiple writesets in the writeset tree to digest, then all these
writesets are digested using the same cache and the cache is not
re-initialized when moving from one writeset to the next.
For devices with more than 64 blocks, i.e., the size of the cache, the
cache is indirectly invalidated when we move to a next set of blocks, so
we avoid the bug.
But for devices with at most 64 blocks we end up using the same cached
data for digesting all archived writesets, i.e., the cache is loaded
when digesting the first writeset and it never gets reloaded, until the
digestion is done.
As a result, the writeset of the first era to digest is used as the
writeset of all the following archived eras, leading to lost writes.
Fix this by reinitializing the dm_disk_bitset structure, and thus
invalidating the cache, every time the digestion code starts digesting a
new writeset.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In case of a system crash, dm-era might fail to mark blocks as written
in its metadata, although the corresponding writes to these blocks were
passed down to the origin device and completed successfully.
Consider the following sequence of events:
1. We write to a block that has not been yet written in the current era
2. era_map() checks the in-core bitmap for the current era and sees
that the block is not marked as written.
3. The write is deferred for submission after the metadata have been
updated and committed.
4. The worker thread processes the deferred write
(process_deferred_bios()) and marks the block as written in the
in-core bitmap, **before** committing the metadata.
5. The worker thread starts committing the metadata.
6. We do more writes that map to the same block as the write of step (1)
7. era_map() checks the in-core bitmap and sees that the block is marked
as written, **although the metadata have not been committed yet**.
8. These writes are passed down to the origin device immediately and the
device reports them as completed.
9. The system crashes, e.g., power failure, before the commit from step
(5) finishes.
When the system recovers and we query the dm-era target for the list of
written blocks it doesn't report the aforementioned block as written,
although the writes of step (6) completed successfully.
The issue is that era_map() decides whether to defer or not a write
based on non committed information. The root cause of the bug is that we
update the in-core bitmap, **before** committing the metadata.
Fix this by updating the in-core bitmap **after** successfully
committing the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Following a system crash, dm-era fails to recover the committed writeset
for the current era, leading to lost writes. That is, we lose the
information about what blocks were written during the affected era.
dm-era assumes that the writeset of the current era is archived when the
device is suspended. So, when resuming the device, it just moves on to
the next era, ignoring the committed writeset.
This assumption holds when the device is properly shut down. But, when
the system crashes, the code that suspends the target never runs, so the
writeset for the current era is not archived.
There are three issues that cause the committed writeset to get lost:
1. dm-era doesn't load the committed writeset when opening the metadata
2. The code that resizes the metadata wipes the information about the
committed writeset (assuming it was loaded at step 1)
3. era_preresume() starts a new era, without taking into account that
the current era might not have been archived, due to a system crash.
To fix this:
1. Load the committed writeset when opening the metadata
2. Fix the code that resizes the metadata to make sure it doesn't wipe
the loaded writeset
3. Fix era_preresume() to check for a loaded writeset and archive it,
before starting a new era.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Do not attempt to write any data beyond the end of the underlying data
device while shrinking it.
The DM writecache device must be suspended when the underlying data
device is shrunk.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Since commit ff9ea323816d ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix dm_table_supports_zoned_model() and invert logic of both
iterate_devices_callout_fn so that all devices' zoned capabilities are
properly checked.
Add one more parameter to dm_table_any_dev_attr(), which is actually
used as the @data parameter of iterate_devices_callout_fn, so that
dm_table_matches_zone_sectors() can be replaced by
dm_table_any_dev_attr().
Fixes: dd88d313bef02 ("dm table: add zoned block devices validation")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.
Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit 27f5411a718c ("dm crypt: support using encrypted keys") extended
dm-crypt to allow use of "encrypted" keys along with "user" and "logon".
Along the same lines, teach dm-crypt to support "trusted" keys as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
IS_ENABLED(CONFIG_ENCRYPTED_KEYS) is true whether the option is built-in
or a module, so use it instead of #if defined checking for each
separately.
The other #if was to avoid a static function defined, but unused
warning. As we now always build the callsite when the function
is defined, we can remove that first #if guard.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove NULL checks before vfree() to fix these warnings:
./drivers/md/dm-writecache.c:2008:2-7: WARNING: NULL check before some
freeing functions is not needed.
./drivers/md/dm-writecache.c:2024:2-7: WARNING: NULL check before some
freeing functions is not needed.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Fix a thinko in ssd_commit_superblock. region.count is in sectors, not
bytes. This bug doesn't corrupt data, but it causes performance
degradation.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: dc8a01ae1dbd ("dm writecache: optimize superblock write")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The "fix_hmac" argument improves security of internal_hash and
journal_mac:
- the section number is mixed to the mac, so that an attacker can't
copy sectors from one journal section to another journal section
- the superblock is protected by journal_mac
- a 16-byte salt stored in the superblock is mixed to the mac, so
that the attacker can't detect that two disks have the same hmac
key and also to disallow the attacker to move sectors from one
disk to another
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> # ReST fix
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
shadow_root() truncates 64-bit dm_block_t into 32-bit int. This is
not an issue in practice, since dm metadata as of v5.11 can only hold at
most 4161600 blocks (255 index entries * ~16k metadata blocks).
Nevertheless, this can confuse users debugging some specific data
corruption scenarios. Also, DM_SM_METADATA_MAX_BLOCKS may be bumped in
the future, or persistent-data may find its use in other places.
Therefore, switch the return type of shadow_root from int to dm_block_t.
Signed-off-by: Jinoh Kang <jinoh.kang.kr@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add two helper macros calculating the offset of bio in struct dm_io and
struct dm_target_io respectively.
Besides, simplify the front padding calculation in
dm_alloc_md_mempools().
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is a spelling mistake in a dm_integrity_io_error error
message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
See Documentation/core-api/printk-formats.rst.
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
bio_init() clears bio instance, so the bvec index has to be set after
bio_init(), otherwise bio->bi_io_vec may be leaked.
Fixes: 3175199ab0ac ("block: split bio_kmalloc from bio_alloc_bioset")
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the read-only check in restart_array identical to the other two
read-only checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->meta_bdev is optional and not set for most arrays. Add a
rdev_read_only helper that calls bdev_read_only for both devices
in a safe way.
Fixes: 6f0d9689b670 ("block: remove the NULL bdev check in bdev_read_only")
Reported-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 684da7628d93 ("block: remove unnecessary argument from
blk_execute_rq") changes the signature of blk_execute_rq(), but misses
to adjust its kernel-doc.
Hence, make htmldocs warns on ./block/blk-exec.c:78:
warning: Excess function parameter 'q' description in 'blk_execute_rq'
Drop removed argument from kernel-doc of blk_execute_rq() as well.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Guoqing Jiang <Guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 52f019d43c22 ("block: add a hard-readonly flag to struct gendisk")
provides some kernel-doc for set_disk_ro(), but introduces a small typo.
Hence, make htmldocs warns on ./block/genhd.c:1441:
warning: Function parameter or member 'read_only' not described in 'set_disk_ro'
warning: Excess function parameter 'ready_only' description in 'set_disk_ro'
Remove that typo in the kernel-doc for set_disk_ro().
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current tree spews this on compile:
mm/swapfile.c:2290:17: warning: ‘map_swap_entry’ defined but not used [-Wunused-function]
2290 | static sector_t map_swap_entry(swp_entry_t entry, struct block_device **bdev)
| ^~~~~~~~~~~~~~
if !CONFIG_HIBERNATION, as we don't use the function unless we have that
config option set.
Fixes: 48d15436fde6 ("mm: remove get_swap_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just reuse the block_device and sector from the swap_info structure,
just as used by the SWP_SYNCHRONOUS path. Also remove the checks for
NULL returns from bio_alloc as that can't happen for sleeping
allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_alloc never returns NULL when it can sleep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_alloc never returns NULL when it can sleep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor raid5_read_one_chunk so that all simple checks are done
before allocating the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
md_bio_alloc_sync is never called with a NULL mddev, and ->sync_set is
initialized in md_run, so it always must be initialized as well. Just
open code the remaining call to bio_alloc_bioset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use an on-stack bio and biovec for the single page synchronous I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_alloc_mddev is never called with a NULL mddev, and ->bio_set is
initialized in md_run, so it always must be initialized as well. Just
open code the remaining call to bio_alloc_bioset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Open code drbd_req_make_private_bio in the two callers to prepare
for further changes. Also don't bother to initialize bi_next as the
bio code already does that that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Given that drbd_md_io_bio_set is initialized during module initialization
and the module fails to load if the initialization fails there is no need
to fall back to plain bio_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sleeping bio allocations do not fail, which means that injecting an error
into sleeping bio allocations is a little silly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
